1983 Ford Mustang Ignition Electronic Parts
More 1983 Ford Mustang Ignition Electronic Parts
Find your specific 1983 Ford Mustang original or aftermarket Ignition Electronic Parts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1983 Ford Mustang Ignition Electronic Parts
Carquest Premium – Ignition Module (Part No.CBG1008)
from
$58.99
CARQUEST Ignition Modules are built by an ignition systems manufacturer with expertise in the entire vehicle spark system.
Product Features:
See More
Product Features:
- CARQUEST Ignition Modules creates and refines the timing of the engine using various sensors and readings throughout the spark system in order to create an efficiently running engine.
- CARQUEST Ignition Modules use current and voltage limiting circuitry in order to prevent the ignition coil from over voltage/current. Over voltages can allow for coils to create excessive heat which can damage to the ignition module resulting in check eng
- CARQUEST Ignition Modules are 100% individually tested for all product functionalities including over voltage, timing and dwell.
Carquest Premium – Ignition Module (Part No.CBE1006)
from
$46.99
CARQUEST Ignition Modules are built by an ignition systems manufacturer with expertise in the entire vehicle spark system.
Product Features:
See More
Product Features:
- CARQUEST Ignition Modules creates and refines the timing of the engine using various sensors and readings throughout the spark system in order to create an efficiently running engine.
- CARQUEST Ignition Modules use current and voltage limiting circuitry in order to prevent the ignition coil from over voltage/current. Over voltages can allow for coils to create excessive heat which can damage to the ignition module resulting in check eng
- CARQUEST Ignition Modules are 100% individually tested for all product functionalities including over voltage, timing and dwell.
Delphi – Ignition Control Module (Part No.DS10056)
from
$103.99
Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.
Product Features:
See More
Product Features:
- OE quality replacement parts for the right fit, form and function
Accel – Ford Tfi Modulator 1983-96 (Part No.35368)
from
$96.99
This high performance ignition module provides your plugs with more spark over the stock module. The solid state electronics provide high coil out put and superior reliability. The Dwell control circuit ensures, long consistent coil charging. The current control circuit protects against coil over heating. This module fits most Ford Thick Film Ignition systems. 1983 thru 1996.
Product Features:
See More
Product Features:
- Fits Most Stock And Modified Distributors
- Dwell Control Circuit
- Resists False Triggering
Carquest Premium – Ignition Module (Part No.CBE1007)
from
$69.99
CARQUEST Ignition Modules are built by an ignition systems manufacturer with expertise in the entire vehicle spark system.
Product Features:
See More
Product Features:
- CARQUEST Ignition Modules creates and refines the timing of the engine using various sensors and readings throughout the spark system in order to create an efficiently running engine.
- CARQUEST Ignition Modules use current and voltage limiting circuitry in order to prevent the ignition coil from over voltage/current. Over voltages can allow for coils to create excessive heat which can damage to the ignition module resulting in check eng
- CARQUEST Ignition Modules are 100% individually tested for all product functionalities including over voltage, timing and dwell.
Accel – Ford Tfi Mdltr Rmte Mnt W/Grse (Part No.35371)
from
$103.99
This high performance ignition module provides your plugs with more spark over the stock module. The solid state electronics provide high coil out put and superior reliability. The Dwell control circuit ensures, long consistent coil charging. The current control circuit protects against coil over heating. This module fits most Ford TFI Remote Mounted modules. 1991-95
Product Features:
See More
Product Features:
- Fits Most Stock And Modified Distributors
- Dwell Control Circuit
- Resists False Triggering
Carquest Premium – Ignition Module (Part No.CBJ1076)
from
$56.99
CARQUEST Ignition Modules are built by an ignition systems manufacturer with expertise in the entire vehicle spark system.
Product Features:
See More
Product Features:
- CARQUEST Ignition Modules creates and refines the timing of the engine using various sensors and readings throughout the spark system in order to create an efficiently running engine.
- CARQUEST Ignition Modules use current and voltage limiting circuitry in order to prevent the ignition coil from over voltage/current. Over voltages can allow for coils to create excessive heat which can damage to the ignition module resulting in check eng
- CARQUEST Ignition Modules are 100% individually tested for all product functionalities including over voltage, timing and dwell.
MSD Ignition – Crank Trigger Kit; Small Block Ford (Part No.8640)
from
$593.99
For a long time, racers have known that one of the best things to do to an engine to improve its performance is to stabilize the ignition timing. The MSD flying magnet crank trigger system does exactly that by using magnets embedded in an aluminum wheel. The MSD flying magnet crank trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This flying magnet design produces accurate trigger signals and the non-magnetic pick-up cannot be false triggered. Each flying magnet crank trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver’s side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The adjustable bracket provides a wide range of timing adjustment and spacers are included. These systems will trigger MSD 6, 7, 8 and 10 series ignitions and all MSD timing accessories.
Product Features:
See More
Product Features:
- Absolutely The Most Accurate Way To Trigger The Ignition
- The non-magnetic pickup cannot be false triggered.
- Powerful magnets are embedded in a billet aluminum trigger wheel.
- Incl. brackets/mounting hardware to fit a variety of engines
MSD Ignition – Crank Trigger Kit; Big Block Ford (Part No.8644)
from
$538.99
For a long time, racers have known that one of the best things to do to an engine to improve its performance is to stabilize the ignition timing. The MSD flying magnet crank trigger system does exactly that by using magnets embedded in an aluminum wheel. The MSD flying magnet crank trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This flying magnet design produces accurate trigger signals and the non-magnetic pick-up cannot be false triggered. Each flying magnet crank trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver’s side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The adjustable bracket provides a wide range of timing adjustment and spacers are included. These systems will trigger MSD 6, 7, 8 and 10 series ignitions and all MSD timing accessories.
Product Features:
See More
Product Features:
- Absolutely the most accurate way to trigger the ignition
- The non-magnetic pickup cannot be false triggered.
- Powerful magnets are embedded in a billet aluminum trigger wheel.
- Incl. brackets/mounting hardware to fit a variety of engines
Dorman – 6 – Wire Ford Ignition Module (Gray) (Part No.85130)
from
$23.99
This ignition harness is designed to match the fit and function of the original harness on specified applications, and is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this ignition harness is designed to match the fit and function of the original harness on specified applications
- Ideal solution – this harness is a reliable replacement for an original harness that is missing, failed or damaged due to corrosion
- Durable construction – this part is made from quality materials to ensure reliable performance and a long service life
- Trustworthy quality – designed in the United States and backed by more than a century of automotive aftermarket excellence
Carquest Premium – Distributor Ignition Pickup (Part No.MEA2263)
from
$52.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Distributor Ignition Pickup (Part No.MEA2275)
from
$45.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest – Distributor Ignition Pickup (Part No.ME48)
from
$43.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- High temperature enameled wires were specified for better insulation and performance
- With industry leading expertise in electronic ignition, when original equipment fails our products are designed to fix the inherent failure issues
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
Carquest Premium – Distributor Ignition Pickup (Part No.MEC2265)
from
$40.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest – Distributor Ignition Pickup (Part No.ME12)
from
$43.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- High temperature enameled wires were specified for better insulation and performance
- With industry leading expertise in electronic ignition, when original equipment fails our products are designed to fix the inherent failure issues
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
Carquest Premium – Distributor Ignition Pickup (Part No.MEC2266)
from
$49.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Popular 1983 Ford Mustang Ignition Electronic Parts Categories
1983 Ford Mustang Ignition Electronic Parts
Maybe you’re in the middle of a full rebuild of that 1983 Ford Mustang. Maybe you just need a couple of Ignition Electronic Parts. Either way, Advance Auto Parts has 12 different Ignition Electronic Parts in our inventory ranging from $23.99 to $593.99. That means you can find the exact parts or products you need to keep that 1983 Ford Mustang running smoothly.
Ignition Electronic Parts are only as good as their brand. We stock 5 different brands to make sure you have plenty of trusted parts to choose from for your 1983 Ford Mustang. Carquest Premium, Carquest, and Accel are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Ignition Electronic Parts for your 1983 Ford Mustang, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Ignition Electronic Parts to keep your 1983 Ford Mustang rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Ignition Electronic Parts Brands To Make Your 1983 Ford Mustang Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1983 Ford Mustang demands trusted brand parts and products to keep it running. Many trusted brands of Ignition Electronic Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Mustang the best it can be. Be sure to browse some of our top Ignition Electronic Parts brands and parts.
Popular Carquest Ignition Electronic Parts
We carry Carquest parts in our stock across Ignition Pickup and Stators categories, plus more. For a 1983 Ford Mustang, our most popular Carquest Ignition Electronic Parts include:
Top 1983 Ford Mustang Ignition Electronic Parts from Accel
Accel products are another trusted brand when it comes to Ignition Electronic Parts for your 1983 Ford Mustang. Popular Accel parts include:
FAQs for 1983 Ford Mustang Ignition Electronic Parts
What are the most purchased Ignition Electronic Parts for the 1983 Ford Mustang?
Out of 12 Ignition Electronic Parts for the 1983 Ford Mustang, the most popular in our inventory are:
