1983 Ford E-150 Econoline Towing Products

Essential 1983 Ford E-150 Econoline Towing Products

CARR – Cab Mount, Multi-Fit, Single, Flat Step, Powder Coated, Black, Aluminum (Part No.124031-1)

Cab Mount, Multi-Fit, Single, Flat Step, Powder Coated, Black, Aluminum

from

$148.99
The stylish and innovative design of these steps add to a vehicle rugged off-road look. Available in three low maintenance, extremely durable finishes to complement your vehicle appearance. Easily installed using our new multi mount system for superior strength and rigidity. Rocker panel installation provides for the strongest and easiest installation of any step products.

Product Features:
  • Exclusive New Multi Mount System
  • Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
  • Rugged Tread Pattern Provides For Safe And Attractive Non Slip Surface
  • Unique Design Gives The Vehicle A Rugged Off-Road Look, While Being A Stylish Accent For Today Vehicles
  • Strong Construction To Hold Up Under Extreme Conditions
  • Black Powder Coat Finish Features A Lightly Textured Matte Finish That Resists Scratching, Peeling And Fading
  • Strongest And Easy Installation
See More

CARR – Cab Mount, Multi-Fit, Single, Flat Step, Polished Aluminum (Part No.103992-1)

Cab Mount, Multi-Fit, Single, Flat Step, Polished Aluminum

from

$76.99
Uniquely designed diamond tread pattern provides a safe non slip surface on the flat step area. Our exclusive multi mount system is designed for precision fit and easier installation. Constructed of an extremely strong die cast aluminum alloy for the ultimate in quality and durability. Rocker panel installation provides for the strongest and easiest installation of any step products.

Product Features:
  • Exclusive New Multi Mount System
  • Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
  • Rugged Tread Pattern Provides For Safe And Attractive Non Slip Surface
  • Unique Design Gives The Vehicle A Rugged Off-Road Look, While Being A Stylish Accent For Today Vehicles
  • Strong Construction To Hold Up Under Extreme Conditions
  • Mechanical Polished Finish That Will Not Rust, Crack Or Peel And Requires Very Little Maintenance
  • Strongest And Easy Installation
See More

CARR – Cab Mount, Multi-Fit, Set Of 2, Flat Step, Polished Aluminum, 14" L (Part No.114032)

Cab Mount, Multi-Fit, Set Of 2, Flat Step, Polished Aluminum, 14" L

from

$279.99
LD step will give the user easier access to the vehicle due to the wider and deeper stepping surface which extends further than our other steps. The LD step is available in our three durable finishes, and installation is a cinch with our mounting system.

Product Features:
  • Easier Entry And Exit From Your Vehicle
  • Wide Functional Step Area
  • Extends Further Than Our Current Steps
  • Made Of Corrosion Resistant, Durable Cast Aluminum Alloy For Extreme Longevity
  • New Aggressive And Appealing Tread Design For A Non-Slip Surface
  • Unique Design That Enhances The Looks Of Current Vehicle Body Styles
  • Resists Scratches, Peeling And Fading
  • Rocker Panel Installation Provides For The Strongest And Easiest Installation Of Any Step Products
See More

CARR – Cab Mount, Multi-Fit, Single, Flat Step, Powder Coated, Black, Aluminum (Part No.103991-1)

Cab Mount, Multi-Fit, Single, Flat Step, Powder Coated, Black, Aluminum

from

$76.99
Uniquely designed diamond tread pattern provides a safe non slip surface on the flat step area. Our exclusive multi mount system is designed for precision fit and easier installation. Constructed of an extremely strong die cast aluminum alloy for the ultimate in quality and durability. Rocker panel installation provides for the strongest and easiest installation of any step products.

Product Features:
  • Exclusive New Multi Mount System
  • Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
  • Rugged Tread Pattern Provides For Safe And Attractive Non Slip Surface
  • Unique Design Gives The Vehicle A Rugged Off-Road Look, While Being A Stylish Accent For Today Vehicles
  • Strong Construction To Hold Up Under Extreme Conditions
  • Black Powder Coat Finish Features A Lightly Textured Matte Finish That Resists Scratching, Peeling And Fading
  • Strongest And Easy Installation
See More

CARR – Cab Mount, Multi-Fit, Single, Flat Step, Polished Aluminum (Part No.124032-1)

Cab Mount, Multi-Fit, Single, Flat Step, Polished Aluminum

from

$148.99
The stylish and innovative design of these steps add to a vehicle rugged off-road look. Available in three low maintenance, extremely durable finishes to complement your vehicle appearance. Easily installed using our new multi mount system for superior strength and rigidity. Rocker panel installation provides for the strongest and easiest installation of any step products.

Product Features:
  • Exclusive New Multi Mount System
  • Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
  • Rugged Tread Pattern Provides For Safe And Attractive Non Slip Surface
  • Unique Design Gives The Vehicle A Rugged Off-Road Look, While Being A Stylish Accent For Today Vehicles
  • Strong Construction To Hold Up Under Extreme Conditions
  • Mechanical Polished Finish That Will Not Rust, Crack Or Peel And Requires Very Little Maintenance
  • Strongest And Easy Installation
See More

CARR – Cab Mount, Multi-Fit, Set Of 2, Flat Step, Textured, Matte Black, Aluminum (Part No.103991)

Cab Mount, Multi-Fit, Set Of 2, Flat Step, Textured, Matte Black, Aluminum

from

$142.99
Uniquely designed diamond tread pattern provides a safe non slip surface on the flat step area. Our exclusive multi mount system is designed for precision fit and easier installation. Constructed of an extremely strong die cast aluminum alloy for the ultimate in quality and durability. Rocker panel installation provides for the strongest and easiest installation of any step products.

Product Features:
  • Exclusive New Multi Mount System
  • Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
  • Rugged Diamond Tread Pattern Provides For Safe And Attractive Non Slip Surface
  • Unique Design Gives The Vehicle A Rugged Off Road Look, While Being A Stylish Accent For Today Vehicles
  • Strong Construction To Hold Up Under Extreme Conditions
  • Black Powder Coat Finish Features A Lightly Textured Matte Finish That Resists Scratching, Peeling And Fading
  • Strongest And Easy Installation
See More

Husky Towing – Class Iii, Round Tube, 2"Receiver, 6000Lb Weight Carrying/ 600Lb Tongue Weight (Part No.69498C)

Class Iii, Round Tube, 2"Receiver, 6000Lb Weight Carrying/ 600Lb Tongue Weight

from

$319.99
Husky receiver hitches are design engineered and precision welded with a seamless collar for strength and reliability. Each hitch features an open back receiver for easy cleaning and is protected inside and out with an industry-leading rust-resistant finish. All Husky receiver hitches are rigorously tested to meet SAE J684 standards for safety. With a full line of unique applications, Husky receiver hitches offer a custom fit solution for nearly every vehicle on the road today.

Product Features:
  • Manufactured With A Vehicle-Specific Design For A Custom Fit
  • Precisely-Welded For Superior Strength And Fit
  • Co-Cured In A Rust-Resistant Liquid Bonderite Coating
  • Strengthened With A Welded, Seamless Collar
  • Open-Back Receiver For Easy Cleaning
See More

CURT – Trailer Hitch: 1-1/4" Receiver, 3,500 LB Capacity (Part No.12923)

Trailer Hitch: 1-1/4" Receiver, 3,500 LB Capacity

from

$209.99
When a custom hitch is not available for your vehicle, CURT offers the multi-fit hitch. Designed to be the ultimate in versatility, CURT universal trailer hitches fit several different vehicle manufacturers, including Chevrolet, Chrysler, Dodge, Ford, GMC, Jeep, Nissan, Oldsmobile, Plymouth, Pontiac and Toyota. The multi-fit hitch is a universally designed alternative to our custom hitches. It provides a more affordable option and flexibility in installation. Very simply, a CURT multi-fit trailer hitch uses a sliding or adjustable frame to match the width of your vehicle’s frame. In general, multi-fit hitches are used on mid-size and full-size pickup trucks and SUVs. This class 2 multi-fit trailer hitch features a gross trailer weight capacity of 3,500 lbs., a tongue weight capacity of 350 lbs. and a 1-1/4″ x 1-1/4″ receiver tube opening, making it an excellent choice for towing smaller utility trailers, boat trailers and popup campers, as well as cargo carriers and bike racks (NOTE: Never exceed the lowest weight capacity of any towing component). It comes with mounting hardware and instructions, and typically requires little or no drilling during installation.

Product Features:
  • Features an adjustable frame to fit a variety of vehicles
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Requires little or no drilling on most models
  • Protected by a durable high-gloss black powder coat finish
  • Equipped with an open-back receiver for easy cleaning
See More

CURT – Front Mount Hitch with 2in. Receiver (Part No.33055)

Front Mount Hitch with 2in. Receiver

from

$271.99
A CURT front trailer hitch allows you to use the front end of your vehicle for a variety of towing applications. They can be used for mounting a winch, a snow plow, a number of towing accessories and can even be used for some trailering applications. When space is limited, a front trailer hitch is commonly used to hold a cargo carrier, freeing up space inside the vehicle for extra cargo and making the rear mount receiver available to pull a trailer. At the boat ramp, your boat trailer can be hitched up to the front receiver hitch, giving you better control over the trailer as you launch. Some of the other accessories that can be used with a front tow hitch are the CURT winch mount, step pad, license plate holder, spare tire mount, skid shield and tow hooks. All CURT front trailer hitches provide a useful receiver tube to accept a 2″ x 2″ shank, and they are commonly used on trucks, vans and SUVs. This front trailer hitch is rated for 5,000 lbs. GTW and 500 lbs. TW. It also has a straight-line pull rating of 9,000 lbs. It is designed to be a custom trailer hitch for certain years of the Ford E150, E150 Econoline, E250, E250 Econoline, E350 Econoline and E350 Super Duty (to verify your vehicle compatibility, see application info). It comes with all necessary hardware for a complete installation and is backed by a limited lifetime warranty.

Product Features:
  • Rated to 5,000 lbs. gross trailer weight and 500 lbs. tongue weight
  • Compatible with a tow hook or shackle mount (9,000 lbs. straight-line pull)
  • Engineered with a vehicle-specific design for a custom fit
  • Provides a convenient mount for hitch accessories
  • Ideal for attaching a snow plow, cargo carrier or other front hitch mount
  • Allows for easy maneuvering of a trailer into a tight spot
  • Concealed main body for OE look and seamless integration with the vehicle
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Equipped with an open-back receiver for easy cleaning
See More

Carquest Premium – Trailer Connector Kit (Part No.TCA1364)

Trailer Connector Kit

from

$29.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Hopkins – 7-Way Round / 4-Way Flat Socket and Bracket (Part No.40975)

7-Way Round / 4-Way Flat Socket and Bracket

from

$42.99
Tow more than one trailer? This exact OEM replacement Multi-Tow® design features multiple towing options from one connector by providing sockets for towing both 7 blade and 4 flat trailers. This connector is Plug-In Simple!® with no cutting or splicing, saving you time by utilizing an OEM connector to create an exact fit for easy installation and maximum weatherproofing.

Product Features:
  • Multi-Tow® Provides Multiple Towing Options From One Connector
  • Plug-In Simple® Wiring Kit
  • Utilizes OEM Connectors Create An Exact Fit
  • Includes Mounting Bracket And Hardware
  • Impact And Corrosion Resistant; Weatherproof Lid
  • Pre-Greased Terminals For Added Protection
  • Includes Step-By-Step Instructions
See More

CURT – Replacement OE 7-Way RV Blade Socket (Plugs into USCAR) (Part No.55415)

Replacement OE 7-Way RV Blade Socket (Plugs into USCAR)

from

$20.99
Like trailer hitches and ball mounts, electrical connectors range all over the board in shape, size and capability, but no matter what your trailer’s electrical functions are, you need a solid connection to keep the power flowing and ensure safety on the road. CURT electrical connectors are designed and manufactured to give you a reliable connection every time you plug in your trailer. This 7-way RV blade connector is designed to plug into a USCAR socket and supply power for tail lights, turn signals, electric trailer brakes, a 12-volt battery, reverse lights and brake lights, as well as a ground connection. It is intended to be a replacement trailer connector, plugging into a standard USCAR socket (see application info to verify fitment with your vehicle). It features rust-free black plastic construction and comes with a spring-loaded cover to keep out dust and water. This 7-way RV blade connector is a female-end socket, specifically designed for the vehicle side of the connection.

Product Features:
  • Plugs into USCAR socket to provide 7-way RV blade trailer wiring connector
  • Simple plug-and-play design eliminates the need for cutting or splicing
  • 7-way connects tail, brake, reverse, turn signals, brakes and auxiliary power
  • Spring-loaded dust cover keeps connector clean when not in use
See More

CURT – Custom Wiring Harness, 4-Way Flat Output, Select Ford, Lincoln, Mercury Vehicles (Part No.55344)

Custom Wiring Harness, 4-Way Flat Output, Select Ford, Lincoln, Mercury Vehicles

from

$57.99
If your vehicle is not equipped with wiring for towing a trailer, CURT custom wiring is the ideal solution. A custom wiring harness — also called a T-connector — is a simple, plug-and-play electrical device that plugs into your automotive electric system and provides a standard, universal trailer wiring connection. This is done using two or more vehicle-specific, OEM-compatible connectors to plug into the taillight assembly, eliminating the need for cutting, splicing and soldering during installation. Custom wiring harnesses are made vehicle-specific, and while they are not available for all vehicles, they do offer one of the fastest, easiest and most secure ways to wire a vehicle for towing. This particular plug-in harness provides a 4-way flat connector socket and is designed to be a custom wiring harness to fit certain years of the Ford E150, E250, E350, E450, E550 and Econoline Super Duty, Ford Escort, Expedition, Excursion, Explorer, Sport Trac, Focus, Ranger and F150, Lincoln Aviator and Navigator and Mercury Mountaineer and Tracer (to verify your vehicle compatibility, see application info). It comes with all necessary wiring components to establish a reliable trailer wiring connection, as well as a dust cover to keep the connector clean when not in use. You have a picture in mind of your next destination — maybe it’s the boat landing at your favorite fishing spot, maybe it’s a campsite that overlooks one of nature’s masterpieces, or maybe it’s the next big jobsite. However, turning that picture into a reality takes more than just daydreaming. It takes a solid connection and the right amount of power. CURT custom wiring is made with some of the most sophisticated technology in the industry and is designed to install with ease, giving you a long-lasting electrical connection for your towing hitch setup.

Product Features:
  • Plugs into vehicle tail light assembly to provide a 4-way flat socket
  • Simple plug-and-play design eliminates the need for cutting or splicing
  • 4-way flat output connects tail lights, brake lights and turn signals
  • Dust cover included to keep connector clean when not in use
  • Backed by a limited one-year warranty
See More

Hopkins – 48035, 4 Flat Vehicle Side Towing Connector (48") (Part No.48035)

48035, 4 Flat Vehicle Side Towing Connector (48")

from

$7.99
Get your vehicle ready to tow the most common type of trailer on the road by installing this vehicle side 4 flat. This 4 flat connector carries the trailer’s basic lighting and includes printed wire functions that make installation quick.

Product Features:
  • 48 inch length
  • Corrosion Resistant Terminals
  • Most Commonly Used Trailer Connector
  • Found On Small Boat/Utility
  • Printed wire functions for easy wire reference
  • Printed Wire Functions For Easy Wire Reference
  • 100 Percent Tested
See More

Hopkins – 40950, Endurance Multi Tow« Ford / GM 7 Blade and 4 Flat Towing Connector (Part No.40950)

40950, Endurance Multi Tow« Ford / GM 7 Blade and 4 Flat Towing Connector

from

$36.99
By incorporating Endurance design features that include oversized hinges, internal grommets for enhanced weather proofing and a lid that opens 180 degrees, this connector is guaranteed to last for years of trouble free use. Multi-Tow® design feature adds multiple towing options from one connector by providing sockets for towing both 7 blade and 4 flat trailers. This connector is Plug-In Simple!® with no cutting or splicing, saving you time by utilizing an OEM connector to create an exact fit for easy installation and maximum weatherproofing. Four hole mount installation for standard mounting brackets.

Product Features:
  • Endurance Professional Grade
  • Plug-In Simple!® Wiring Kit
  • Utilizes OEM connectors create an exact fit and maximum weatherproofing
  • Multi-Tow® provides multiple towing options from one connector
  • Weatherproof lid opens 180 degrees
  • Oversized hinge offers ultimate durability
  • Superior Ergonomics
  • For Use w/Factory Tow Package
  • Impact And Corrosion Resistant
See More

Carquest Premium – Trailer Connector Kit (Part No.TCC1251)

Trailer Connector Kit

from

$78.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

CURT – Custom Wiring Harness (4-Way Flat Output) (Part No.56020)

Custom Wiring Harness (4-Way Flat Output)

from

$62.99
If your vehicle is not equipped with wiring for towing a trailer, CURT custom wiring is the ideal solution. A custom wiring harness — also called a T-connector — is a simple, plug-and-play electrical device that plugs into your automotive electric system and provides a standard, universal trailer wiring connection. This is done using two or more vehicle-specific, OEM-compatible connectors to plug into the taillight assembly, eliminating the need for cutting, splicing and soldering during installation. Custom wiring harnesses are made vehicle-specific, and while they are not available for all vehicles, they do offer one of the fastest, easiest and most secure ways to wire a vehicle for towing. This particular plug-in harness provides a 4-way flat connector socket and is designed to be a custom wiring harness to fit certain years of the Ford E150, E250 and E350 Super Duty (to verify your vehicle compatibility, see application info). It comes with all necessary wiring components to establish a reliable trailer wiring connection, as well as a dust cover to keep the connector clean when not in use. You have a picture in mind of your next destination — maybe it’s the boat landing at your favorite fishing spot, maybe it’s a campsite that overlooks one of nature’s masterpieces, or maybe it’s the next big jobsite. However, turning that picture into a reality takes more than just daydreaming. It takes a solid connection and the right amount of power. CURT custom wiring is made with some of the most sophisticated technology in the industry and is designed to install with ease, giving you a long-lasting electrical connection for your towing hitch setup.

Product Features:
  • Plugs into vehicle tail light assembly to provide a 4-way flat socket
  • Simple plug-and-play design eliminates the need for cutting or splicing
  • 4-way flat output connects tail lights, brake lights and turn signals
  • Dust cover included to keep connector clean when not in use
See More

CURT – Replacement OE 4-Way Flat Socket (Plugs into USCAR) (Part No.55515)

Replacement OE 4-Way Flat Socket (Plugs into USCAR)

from

$30.99
A CURT custom wiring connector (sometimes called a T-connector) is a simple, plug-and-play electrical device that eliminates the need for cutting, splicing and soldering when installing vehicle-to-trailer wiring. Most vehicles do not come ready to tow. Unless your vehicle has a towing package, it is probably not equipped with a trailer wiring connector. This is where CURT’s custom wiring connectors come into play. A custom wiring connector uses a single original equipment plug to plug into a special socket provided by your vehicle. Though this option is not available on every vehicle, some automotive manufacturers design their vehicles to be easily equipped for towing by supplying a socket, integrated into the vehicle’s electrical system, to readily accept a custom wiring connector. With a CURT custom wiring connector, there is no need to tap into the taillight assembly because a special socket is already provided. This custom wiring connector provides a 4-way flat connector socket and is designed to be a custom wiring option for a variety of vehicles (see application info to verify fitment with your vehicle). CURT custom wiring connectors are designed to be long-lasting and simple to install. They come with dust covers to keep your connector clean when not in use.

Product Features:
  • Plugs into USCAR socket to provide 4-way flat trailer wiring connector
  • Simple plug-and-play design eliminates the need for cutting or splicing
  • 4-way flat output connects tail lights, brake lights and turn signals
  • Dust cover included to keep connector clean when not in use
  • Slit loom keeps wires contained and well protected
  • Backed by a limited one-year warranty
See More

CURT – Trailer Hitch: 2" Receiver, 6,000 LB Capacity, Installs as low as 35 Mins (Part No.13055)

Trailer Hitch: 2" Receiver, 6,000 LB Capacity, Installs as low as 35 Mins

from

$229.99
Whatever your task at hand — whether it’s launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close — CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Ford E150, E150 Econoline, E250, E250 Econoline and E350 Super Duty (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 6,000 lbs. GTW and 600 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 8,000 lbs. WD and 800 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2″ receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.

Product Features:
  • Rated to 6,000 lbs. gross trailer weight and 600 lbs. tongue weight
  • Compatible with weight distribution hitch (8,000 lbs. WD / 800 lbs. WDTW)
  • Engineered with a vehicle-specific design for a custom fit
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Equipped with an open-back receiver for easy cleaning
  • Made in USA (may include imported hardware)
See More

CURT – Trailer Hitch: 2" Receiver, 5,000 LB Capacity, Installs as low as 60 Mins (Part No.13053)

Trailer Hitch: 2" Receiver, 5,000 LB Capacity, Installs as low as 60 Mins

from

$216.99
Whatever your task at hand — whether it’s launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close — CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Ford E150, E150 Econoline, E250, E250 Econoline, E350 Econoline and E350 Super Duty (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 500 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 7,500 lbs. WD and 750 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2″ receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.

Product Features:
  • Rated to 5,000 lbs. gross trailer weight and 500 lbs. tongue weight
  • Compatible with weight distribution hitch (7,500 lbs. WD / 750 lbs. WDTW)
  • Engineered with a vehicle-specific design for a custom fit
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Equipped with an open-back receiver for easy cleaning
  • Made in USA (may include imported hardware)
See More

CURT – Trailer Hitch: 2" Receiver, 10,000 LB Capacity, Installs as low as 60 Mins (Part No.14053)

Trailer Hitch: 2" Receiver, 10,000 LB Capacity, Installs as low as 60 Mins

from

$287.99
Whatever the next item is on your to-do list — whether it’s arriving at the jobsite before dawn or getting your travel trailer set up in time to see the sunset — CURT class 4 trailer hitches offer greater towing power to let you Bring It. These custom receiver hitches are built to tackle bigger jobs and bolder adventures, all while giving you a custom fit for your vehicle. Class 4 hitches are available for a variety of makes and models, from pickup trucks and SUVs to full-size and commercial vans. This particular class 4 hitch fits certain years of the Ford E150, E150 Econoline, E250, E250 Econoline, E350 Econoline and E350 Super Duty (to verify vehicle compatibility, see application info). It provides a weight carrying capacity of 10,000 lbs. GTW and 1,000 lbs. TW. It can also accept a weight distributing hitch, offering a maximum WD capacity of 12,000 lbs. and a WDTW of 1,200 lbs. CURT class 4 tow hitches are as much suited for work as they are for play. With their high load capacities, they are typically used for towing larger trailers, including everything from a double-axle utility trailer or livestock trailer to a full-length camper or large boat trailer (NOTE: Never exceed the lowest weight capacity of any towing component). All CURT class 4 receiver hitches come with a 2″ receiver tube opening and all the necessary hardware for a complete installation. From light-duty to heavy-duty, every CURT custom hitch is engineered to be vehicle-specific, using actual vehicles to create the optimal design. We then combine high-strength steel, precise welding and a co-cured finish of liquid A-coat and durable black powder coat to provide you with a hitch you can depend on. To prove it, we test all our hitches in accordance with SAE J684 for safety.

Product Features:
  • Rated to 10,000 lbs. gross trailer weight and 1,000 lbs. tongue weight
  • Compatible with weight distribution hitch (12,000 lbs. WD / 1,200 lbs. WDTW)
  • Engineered with a vehicle-specific design for a custom fit
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Equipped with an open-back receiver for easy cleaning
  • Made in USA (may include imported hardware)
See More

1983 Ford E-150 Econoline Towing Products

You count on your 1983 Ford E-150 Econoline to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Towing Products. With 10 Towing Products ranging in price from $7.99 to $287.99, you’re sure to find everything you need for your 1983 Ford E-150 Econoline.

Brands matter. If you want to shop a specific Towing Products brand, we stock 3 different brands like Hopkins, CARR, and CURT. 1983 Ford E-150 Econoline Towing Products start as low as $7.99!

One of the best ways to find top quality OEM or aftermarket Towing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 55 extensive product reviews on 1983 Ford E-150 Econoline Towing Products.

Did we mention you can order your Towing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Towing Products inventory for your 1983 Ford E-150 Econoline below to get started!

Top-Rated Towing Products Brands For Your 1983 Ford E-150 Econoline

Trusted Towing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1983 Ford E-150 Econoline running right for years to come. In our inventory you’ll find brands like Hopkins, CARR, CURT, and even more.

Popular Hopkins Towing Products

You’ll find popular Hopkins brand products across Trailer Wiring. All are waiting to get your 1983 Ford E-150 Econoline back on the road. Some of the top-rated Hopkins products in these categories are:
48035, 4 Flat Vehicle Side Towing Connector (48")
from $7.99
(5)
48035, 4 Flat Vehicle Side Towing Connector (48")
Trailer Wiring Kits

FAQs for 1983 Ford E-150 Econoline Towing Products

What are the most purchased Towing Products for the 1983 Ford E-150 Econoline?

Out of 10 Towing Products for the 1983 Ford E-150 Econoline, the most popular in our inventory are:
Cab Mount, Multi-Fit, Single, Flat Step, Powder Coated, Black, Aluminum
from $76.99
This product is not rated
Cab Mount, Multi-Fit, Single, Flat Step, Powder Coated, Black, Aluminum
Trailer Hitch Steps
Trailer Hitch: 2" Receiver, 10,000 LB Capacity, Installs as low as 60 Mins
from $287.99
This product is not rated
Trailer Hitch: 2" Receiver, 10,000 LB Capacity, Installs as low as 60 Mins
Trailer Hitch-Class III/IV
Trailer Hitch: 2" Receiver, 5,000 LB Capacity, Installs as low as 60 Mins
from $216.99
This product is not rated
Trailer Hitch: 2" Receiver, 5,000 LB Capacity, Installs as low as 60 Mins
Trailer Hitch-Class III/IV