1983 Ford E-100 Econoline Towing Products

Get your vehicle ready to tow the most common type of trailer on the road by installing this vehicle side 4 flat. This 4 flat connector carries the trailer’s basic lighting and includes printed wire functions that make installation quick.

Product Features:

• 48 inch length
• Corrosion Resistant Terminals
• Most Commonly Used Trailer Connector
• Found On Small Boat/Utility
• Printed wire functions for easy wire reference
• Printed Wire Functions For Easy Wire Reference
• 100 Percent Tested

The stylish and innovative design of these steps add to a vehicle rugged off-road look. Available in three low maintenance, extremely durable finishes to complement your vehicle appearance. Easily installed using our new multi mount system for superior strength and rigidity. Rocker panel installation provides for the strongest and easiest installation of any step products.

Product Features:

• Exclusive New Multi Mount System
• Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
• Rugged Tread Pattern Provides For Safe And Attractive Non Slip Surface
• Unique Design Gives The Vehicle A Rugged Off-Road Look, While Being A Stylish Accent For Today Vehicles
• Strong Construction To Hold Up Under Extreme Conditions
• Black Powder Coat Finish Features A Lightly Textured Matte Finish That Resists Scratching, Peeling And Fading
• Strongest And Easy Installation

Uniquely designed diamond tread pattern provides a safe non slip surface on the flat step area. Our exclusive multi mount system is designed for precision fit and easier installation. Constructed of an extremely strong die cast aluminum alloy for the ultimate in quality and durability. Rocker panel installation provides for the strongest and easiest installation of any step products.

Product Features:

• Exclusive New Multi Mount System
• Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
• Rugged Tread Pattern Provides For Safe And Attractive Non Slip Surface
• Unique Design Gives The Vehicle A Rugged Off-Road Look, While Being A Stylish Accent For Today Vehicles
• Strong Construction To Hold Up Under Extreme Conditions
• Mechanical Polished Finish That Will Not Rust, Crack Or Peel And Requires Very Little Maintenance
• Strongest And Easy Installation

The stylish and innovative design of these steps add to a vehicle rugged off-road look. Available in three low maintenance, extremely durable finishes to complement your vehicle appearance. Easily installed using our new multi mount system for superior strength and rigidity. Rocker panel installation provides for the strongest and easiest installation of any step products.

Product Features:

• Exclusive New Multi Mount System
• Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
• Rugged Tread Pattern Provides For Safe And Attractive Non Slip Surface
• Unique Design Gives The Vehicle A Rugged Off-Road Look, While Being A Stylish Accent For Today Vehicles
• Strong Construction To Hold Up Under Extreme Conditions
• Mechanical Polished Finish That Will Not Rust, Crack Or Peel And Requires Very Little Maintenance
• Strongest And Easy Installation

Uniquely designed diamond tread pattern provides a safe non slip surface on the flat step area. Our exclusive multi mount system is designed for precision fit and easier installation. Constructed of an extremely strong die cast aluminum alloy for the ultimate in quality and durability. Rocker panel installation provides for the strongest and easiest installation of any step products.

Product Features:

• Exclusive New Multi Mount System
• Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
• Rugged Diamond Tread Pattern Provides For Safe And Attractive Non Slip Surface
• Unique Design Gives The Vehicle A Rugged Off Road Look, While Being A Stylish Accent For Today Vehicles
• Strong Construction To Hold Up Under Extreme Conditions
• Black Powder Coat Finish Features A Lightly Textured Matte Finish That Resists Scratching, Peeling And Fading
• Strongest And Easy Installation

Uniquely designed diamond tread pattern provides a safe non slip surface on the flat step area. Our exclusive multi mount system is designed for precision fit and easier installation. Constructed of an extremely strong die cast aluminum alloy for the ultimate in quality and durability. Rocker panel installation provides for the strongest and easiest installation of any step products.

Product Features:

• Exclusive New Multi Mount System
• Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
• Rugged Tread Pattern Provides For Safe And Attractive Non Slip Surface
• Unique Design Gives The Vehicle A Rugged Off-Road Look, While Being A Stylish Accent For Today Vehicles
• Strong Construction To Hold Up Under Extreme Conditions
• Black Powder Coat Finish Features A Lightly Textured Matte Finish That Resists Scratching, Peeling And Fading
• Strongest And Easy Installation

LD step will give the user easier access to the vehicle due to the wider and deeper stepping surface which extends further than our other steps. The LD step is available in our three durable finishes, and installation is a cinch with our mounting system.

Product Features:

• Easier Entry And Exit From Your Vehicle
• Wide Functional Step Area
• Extends Further Than Our Current Steps
• Made Of Corrosion Resistant, Durable Cast Aluminum Alloy For Extreme Longevity
• New Aggressive And Appealing Tread Design For A Non-Slip Surface
• Unique Design That Enhances The Looks Of Current Vehicle Body Styles
• Resists Scratches, Peeling And Fading
• Rocker Panel Installation Provides For The Strongest And Easiest Installation Of Any Step Products

Whatever the next item is on your to-do list — whether it’s arriving at the jobsite before dawn or getting your travel trailer set up in time to see the sunset — CURT class 4 trailer hitches offer greater towing power to let you Bring It. These custom receiver hitches are built to tackle bigger jobs and bolder adventures, all while giving you a custom fit for your vehicle. Class 4 hitches are available for a variety of makes and models, from pickup trucks and SUVs to full-size and commercial vans. This particular class 4 hitch fits certain years of the Ford E150, E150 Econoline, E250, E250 Econoline, E350 Econoline and E350 Super Duty (to verify vehicle compatibility, see application info). It provides a weight carrying capacity of 10,000 lbs. GTW and 1,000 lbs. TW. It can also accept a weight distributing hitch, offering a maximum WD capacity of 12,000 lbs. and a WDTW of 1,200 lbs. CURT class 4 tow hitches are as much suited for work as they are for play. With their high load capacities, they are typically used for towing larger trailers, including everything from a double-axle utility trailer or livestock trailer to a full-length camper or large boat trailer (NOTE: Never exceed the lowest weight capacity of any towing component). All CURT class 4 receiver hitches come with a 2″ receiver tube opening and all the necessary hardware for a complete installation. From light-duty to heavy-duty, every CURT custom hitch is engineered to be vehicle-specific, using actual vehicles to create the optimal design. We then combine high-strength steel, precise welding and a co-cured finish of liquid A-coat and durable black powder coat to provide you with a hitch you can depend on. To prove it, we test all our hitches in accordance with SAE J684 for safety.

Product Features:

• Rated to 10,000 lbs. gross trailer weight and 1,000 lbs. tongue weight
• Compatible with weight distribution hitch (12,000 lbs. WD / 1,200 lbs. WDTW)
• Engineered with a vehicle-specific design for a custom fit
• Tested for safety in accordance with SAE J684
• Precisely welded for superior strength and fit
• Protected by a durable high-gloss black powder coat finish
• Co-cured in a rust-resistant liquid A-coat, inside and out
• Equipped with an open-back receiver for easy cleaning
• Made in USA (may include imported hardware)

Whatever your task at hand — whether it’s launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close — CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Ford E150, E150 Econoline, E250, E250 Econoline, E350 Econoline and E350 Super Duty (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 500 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 7,500 lbs. WD and 750 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2″ receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.

Product Features:

• Rated to 5,000 lbs. gross trailer weight and 500 lbs. tongue weight
• Compatible with weight distribution hitch (7,500 lbs. WD / 750 lbs. WDTW)
• Engineered with a vehicle-specific design for a custom fit
• Tested for safety in accordance with SAE J684
• Precisely welded for superior strength and fit
• Protected by a durable high-gloss black powder coat finish
• Co-cured in a rust-resistant liquid A-coat, inside and out
• Equipped with an open-back receiver for easy cleaning
• Made in USA (may include imported hardware)

When a custom hitch is not available for your vehicle, CURT offers the multi-fit hitch. Designed to be the ultimate in versatility, CURT universal trailer hitches fit several different vehicle manufacturers, including Chevrolet, Chrysler, Dodge, Ford, GMC, Jeep, Nissan, Oldsmobile, Plymouth, Pontiac and Toyota. The multi-fit hitch is a universally designed alternative to our custom hitches. It provides a more affordable option and flexibility in installation. Very simply, a CURT multi-fit trailer hitch uses a sliding or adjustable frame to match the width of your vehicle’s frame. In general, multi-fit hitches are used on mid-size and full-size pickup trucks and SUVs. This class 2 multi-fit trailer hitch features a gross trailer weight capacity of 3,500 lbs., a tongue weight capacity of 350 lbs. and a 1-1/4″ x 1-1/4″ receiver tube opening, making it an excellent choice for towing smaller utility trailers, boat trailers and popup campers, as well as cargo carriers and bike racks (NOTE: Never exceed the lowest weight capacity of any towing component). It comes with mounting hardware and instructions, and typically requires little or no drilling during installation.

Product Features:

• Features an adjustable frame to fit a variety of vehicles
• Tested for safety in accordance with SAE J684
• Precisely welded for superior strength and fit
• Requires little or no drilling on most models
• Protected by a durable high-gloss black powder coat finish
• Equipped with an open-back receiver for easy cleaning