1983 Chevrolet C20 Bodies and Fender Parts

More 1983 Chevrolet C20 Bodies and Fender Parts

Find your specific 1983 Chevrolet C20 original or aftermarket Bodies and Fender Parts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1983 Chevrolet C20 Bodies and Fender Parts

KAI – B-Pillar/Rocker Panel (Part No.RRP103)

B-Pillar/Rocker Panel

from

$44.99
New Standard Replacement Driver Side Rocker Panel With Short B-Pillar Door Post, 46 3/4 X 11 3/4

Product Features:
  • 46 3/4 X 11 3/4, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Quarter Panel Patch (Part No.RRP150)

Quarter Panel Patch

from

$49.99
New Standard Replacement Passenger Side Quarter Panel Rear Section, 60 1/2 X 28

Product Features:
  • 60 1/2 X 28, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

Dee Zee – With Step Pads, 3" Round Bent/ 32" L, Polished, Ss, With Welded End Caps (Part No.DZ3700303)

With Step Pads, 3" Round Bent/ 32" L, Polished, Ss, With Welded End Caps

from

$661.99
A tubular side step for your vehicle. Dee Zee Universal Steps are available when a custom fit application is not available for your vehicle. Drilling is required into the vehicle frame for mounting. Sturdy hidden bracing and hardware is coated to help prevent rust and keep your tubes strong. Molded plastic step pads provide a non-skid stepping area. Universal Nerf Bars are available in 3 Inch Round or 4 Inch Oval designs. 3 Inch Round designs are available in UltraShine Aluminum, Black Aluminum, Polished Stainless Steel or Black Steel. 4 Inch Oval designs feature UltraShine Aluminum or Black Aluminum.

Product Features:
  • Mounting Kit Included
  • Frame Body Mount Bolts
  • Drilling Required
  • 1 Pad On The Bar
  • Frame Mounted For Maximum Strength
  • Powder Coated Steel Braces Resist Rust
  • Powder Coated Steel Braces Resist Rust
  • Molded Plastic Step Pads For Secure Footing
  • Fit Most Full And Mid Size Pickups
See More
View Product

KAI – Rocker Panel (Part No.RRP101)

Rocker Panel

from

$26.99
New Standard Replacement Driver Side Rocker Panel, Slip-On Type, 42 1/2 X 5 1/2

Product Features:
  • Slip-On Type, 42 1/2 X 5 1/2, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Quarter Panel (Part No.GMK4174610732R)

Quarter Panel

from

$119.99
New Goodmark Passenger Side Lower Front Quarter Panel Patch, 7 3/4 Inches Wide X 14 1/2 Inches High

Product Features:
  • 7 3/4 Inches Wide X 14 1/2 Inches High
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Spare Tire Bracket (Part No.GMK4144967751)

Spare Tire Bracket

from

$59.99
New Goodmark Spare Tire Support Hook, For Models With Glide-Out Spare Tire, Made Of Steel

Product Features:
  • For Models With Glide-Out Spare Tire Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Fender Brace (Part No.GMK4144662731)

Fender Brace

from

$21.99
New Goodmark Rear Fender Center Brace, For Stepside Models, 4 Required, Made Of Steel

Product Features:
  • For Stepside Models 4 Required Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Roll Pan (Part No.EFXRP16)

Roll Pan

from

$184.99
New ProEFX Rear Roll Pan, Without License Plate Part

Product Features:
  • Without License Plate Part
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Wheel Arch Panel (Part No.RRP113)

Wheel Arch Panel

from

$24.99
New Standard Replacement Passenger Side Slip-On Rear Fender Section, 41 5/8 X 12

Product Features:
  • 41 5/8 X 12, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Backing Plate (Part No.RRP104L)

Backing Plate

from

$13.99
New Standard Replacement Driver Side Rocker Panel Backing Plate, 33 1/2 X 6 1/2

Product Features:
  • 33 1/2 X 6 1/2, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

Needa Parts – Panel Trim Retainer – Interior – GM/Chrysler (Part No.45478)

Panel Trim Retainer - Interior - GM/Chrysler

from

$2.49
Needa Parts, a division of the Hillman Group, is an industry leader in all types of automotive body fasteners, retainers, and clips, offering over 400 SKUs of interior, exterior, and underhood fasteners.

Product Features:
  • Needa Parts offers a complete assortment for all popular makes and models
  • Vehicle make specific fastener kits are available
  • All fasteners meet or exceed OEM standards
See More
View Product

KAI – Sheetmetal Sheet (Part No.RRP960)

Sheetmetal Sheet

from

$14.99
New, Standard Replacement Flex Edge, With 3/4 Lip, 36 X 3

Product Features:
  • Meets All Federal Motor Safety Standards
  • No Drilling Or Modifications Needed For Installation
  • Same Form Fit As OE
See More
View Product

KAI – Floor Pan (Part No.RRP083)

Floor Pan

from

$98.99
New Standard Replacement Driver Side Extended Cab Floor, 24 X 33

Product Features:
  • 24 X 33, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Floor Pan (Part No.RRP147)

Floor Pan

from

$43.99
New Standard Replacement Driver Side Cab Floor, Front Section, 22 1/4 X 29

Product Features:
  • Front Section, 22 1/4 X 29, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Fender Extension Panel (Part No.RRP114)

Fender Extension Panel

from

$24.99
New Standard Replacement Driver Side Rear Slip-On Fender Section, 41 5/8 X 12

Product Features:
  • 41 5/8 X 12, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

Covercraft – Custom Hood Protector (Part No.45120-01)

Custom Hood Protector

from

$65.99
Custom Hood Protectors by Covercraft are a sporty accessory that protects your vehicle’s hood. Custom made to fit your specific vehicle. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. No need to remove it when wet. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. A CHP is a great alternative choice of protection from a full front-end cover. Unexpected road damage is inevitable. Great protection, great style, it’s the easiest way to keep your vehicle in pristine condition!

Product Features:
  • Protects vehicle’s hood from bugs or rock chips
  • Low profile, aerodynamic design
  • Installs in less than 5 minutes, no tools required
  • Custom fit exactly to your vehicle
  • Leather grain vinyl
See More
View Product

Covercraft – Deflector Reflector Hood Mask – Vinyl, Black (Part No.MD201)

Deflector Reflector Hood Mask - Vinyl, Black

from

$55.99
The Deflector-Reflector is a unique hood protector that has a built-in bug deflector. Specially designed at the top of the hood is a reinforced bug deflector that creates a swirling wind action that diverts most bugs, dirt or road debris away from your windshield. This bug deflector can easily be removed and stored in the trunk or behind your seat. Installation is quick and easy in just minutes. Protect your vehicle’s paint and windshield with this unique protector.

Product Features:
  • Hood Protector with Bug Deflector
  • Custom for Popular SUV’s & Pickups
  • Heavy-Duty Vinyl with Soft Fleece Backing
  • Easy To Install / Remove
  • Use In Any Weather
  • Warranty: 90 Days
See More
View Product

KAI – Wheel Arch Trim (Part No.GM1291101)

Wheel Arch Trim

from

$19.49
New Standard Replacement Front Passenger Side Wheel Opening Molding

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Wheel Arch Trim (Part No.GM1290101)

Wheel Arch Trim

from

$19.49
New Standard Replacement Front Driver Side Wheel Opening Molding

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

(1 reviews)
View Product

Energy Suspension – Body Cab Mount Set (Part No.3.4121G)

Body Cab Mount Set

from

$147.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:
  • Assures Longer Lasting Cab to Bed Alignment
  • Replace to Restore Ride Height
  • Gain Durability
  • Stronger Than Original Rubber Mounts
See More
View Product

Energy Suspension – Body Cab Mount Set (Part No.3.4103R)

Body Cab Mount Set

from

$116.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:
  • Assures Longer Lasting Cab to Bed Alignment
  • Replace to Restore Ride Height
  • Gain Durability
  • Stronger Than Original Rubber Mounts
See More
View Product

Energy Suspension – Body Cab Mount Set (Part No.3.4140G)

Body Cab Mount Set

from

$144.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:
  • Assures Longer Lasting Cab to Bed Alignment
  • Replace to Restore Ride Height
  • Gain Durability
  • Stronger Than Original Rubber Mounts
See More
View Product

KAI – Dash Panel Overlay (Part No.DCV010004)

Dash Panel Overlay

from

$254.99
New Standard Replacement Dash Cap, Fits GM Full Size Pick Up/Blazer And Suburban

Product Features:
  • Fits GM Full Size Pick Up/Blazer And Suburban
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

Dee Zee – Powder Coated, Black, Steel, Unlighted, 7"W x 90"L (Part No.DZ15321S)

Powder Coated, Black, Steel, Unlighted, 7"W x 90"L

from

$506.99
Dee Zee Rough Step – Industrial gauge steel coated in Dee Zee black NRT (No Rust Technology) powder coat to increase corrosion resistance. Industrial grating step provides extra traction getting in and out of the vehicle while allowing mud, water, snow, and ice to drain off the stepping area.

Product Features:
  • No Rust Technology Powder Coat Is A Specially Designed To Increase Corrosion Protection
  • Industrial Grating Step Provides Extra Traction Getting In And Out Of The Vehicle While Allowing Mud, Water, Snow, And Ice To Drain Off The Stepping Area
  • Rugged 12 Gauge Steel Construction
  • Protective Black Powder Coat Finish
  • Grated Steel Top Provides Unmatched Traction
See More
View Product

1983 Chevrolet C20 Bodies and Fender Parts

Maybe you’re in the middle of a full rebuild of that 1983 Chevrolet C20. Maybe you just need a couple of Bodies and Fender Parts. Either way, Advance Auto Parts has 35 different Bodies and Fender Parts in our inventory ranging from $2.49 to $661.99. That means you can find the exact parts or products you need to keep that 1983 Chevrolet C20 running smoothly.

Bodies and Fender Parts are only as good as their brand. We stock 7 different brands to make sure you have plenty of trusted parts to choose from for your 1983 Chevrolet C20. KAI, Energy Suspension, and ARIES are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Bodies and Fender Parts for your 1983 Chevrolet C20, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Bodies and Fender Parts to keep your 1983 Chevrolet C20 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Bodies and Fender Parts Brands To Make Your 1983 Chevrolet C20 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1983 Chevrolet C20 demands trusted brand parts and products to keep it running. Many trusted brands of Bodies and Fender Parts make up Advance Auto Parts’ inventory, and all are ready to help make your C20 the best it can be. Be sure to browse some of our top Bodies and Fender Parts brands and parts.

Popular KAI Bodies and Fender Parts

We carry KAI parts in our stock across Wheel Arch Trims categories, plus more. For a 1983 Chevrolet C20, our most popular KAI Bodies and Fender Parts include:
Wheel Arch Trim
from $19.49
(1)
Wheel Arch Trim
Wheel Arch Trims

FAQs for 1983 Chevrolet C20 Bodies and Fender Parts

What are the most purchased Bodies and Fender Parts for the 1983 Chevrolet C20?

Out of 35 Bodies and Fender Parts for the 1983 Chevrolet C20, the most popular in our inventory are:
Body Cab Mount Set
from $144.99
This product is not rated
Body Cab Mount Set
Body Mounts
Fender Brace
from $21.99
This product is not rated
Fender Brace
Fender Braces
B-Pillar/Rocker Panel
from $44.99
This product is not rated
B-Pillar/Rocker Panel
Body B-Pillar and Rocker Panels