1982 Pontiac Firebird Fluids

75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency and longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.

Product Features:

• Maxlife technology prevents engine breakdown with 40% better wear protection than the industry standard
• Refresh aging seals and prevent leaks with seal conditioners
• Reduce sludge, deposits, corrosion, and rust with added detergents – keep motors clean inside
• Enhanced friction performance helps maximize power with advanced friction-fighting agents
• Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
• MaxLife Technology: The exclusive formula of Valvoline High Mileage with MaxLife Technology Engine Oil is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles.

Formulated to meet the specific requirements of Subaru vehicles equipped with conventional (non-CVT) transmissions up to model year 2005. Recommended for service-fill in all Subaru automatic transmissions where SUBARU ATF HP is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.

Product Features:

• Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
• Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
• Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
• Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
• Advanced anti-wear technology provides maximum protection to gears and bearings

Formulated to meet the specific requirements of Subaru vehicles equipped with conventional (non-CVT) transmissions up to model year 2005. Recommended for service-fill in all Subaru automatic transmissions where SUBARU ATF HP is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.

Product Features:

• Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
• Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
• Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
• Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
• Advanced anti-wear technology provides maximum protection to gears and bearings

Valvoline SAE 75W-90 Full Synthetic Gear Oil provides the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Engineered to outperform, our detergent package-based formulation contains Full Synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline SAE 75W-90 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance. Protect your gears with Valvoline, the #1 gear oil brand.

Product Features:

• EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION , ranging from -30F to 300F degrees
• REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
• FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
• MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP HYPOID DIFFERENTIALS where APPI GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4 or MT-1 fluid
• MEETS OR EXCEEDS THE PERFORMANCE REQUIREMENTS for Mack GO-H and GO-J; API GL-5 and API MT-1; MIL-PRF-2105E; and SAE J2360

Pennzoil Platinum full synthetic SAE 5W-30 motor oil is uniquely engineered from our revolutionary PurePlus gas-to-liquid technology, which is a patented process that converts pure natural gas into a high quality, full synthetic base oil. Our high quality base oil is 99.5% pure, contains fewer impurities than base oils made from crude oil, and when combined with our advanced additive technology creates one of the best formulations in our Pennzoil portfolio. Pennzoil Platinum full synthetic SAE 5W-30 motor oil is licensed and meets the vehicle warranty requirements of GM’s dexos 1 Gen 2 specifications that are set forth to meet today’s modern engine technologies. This means that our Pennzoil Platinum full synthetic products meet the stringent requirements of leading car manufacturers. Why does this matter? Modern engine technologies have evolved over the years and today’s engine parts have reached an unprecedented level of fine manufacturing tolerances which require a high-quality engine oil to help provide complete engine protection. This includes protection against abnormal combustion phenomenon like low-speed pre-ignition observed in modern turbocharged gasoline direct injection (TGDI) engines. Our Pennzoil Full Synthetic products are engineered for modern engines and offer the following benefits without compromise. Better Fuel Economy. With Pennzoil Platinum full synthetic motor oil, you can drive on average an extra 550 miles vs a dirty engine. Protects Horsepower. Pennzoil Platinum Full Synthetic motor oil helps protect against loss of power by helping to protect your engine against wear and deposit formation. Unsurpassed Wear Protection. When it comes to protecting the internal parts of your engine from metal-on-metal contact, no other leading synthetic motor oil provides better wear protection than Pennzoil Platinum Full Synthetic motor oil. Excellent Temperature Performance.

Product Features:

• Provides better fuel economy-drive on average an extra 550 miles per year (versus a dirty engine)
• Pennzoil Platinum 0W-20 keeps pistons up to 45% cleaner than the toughest industry standard (Based on Sequence IIIH results)
• No other leading synthetic oil provides better wear protection from friction (Based on Sequence IVA wear test using SAE 5W-30)
• Formulated to provide faster low-temperature oil flow and protection in extreme heat
• Helps protect engines from loss of power
• Formulated for modern turbocharged engines-GF-6, API SP/SP-Resource Conserving and all previous categories
• Revolutionary PurePlus Technology: Engineered from Pennzoil’s patented PurePlus gas-to-liquid technology, converting pure natural gas into high-quality, full synthetic base oil that is 99.5% pure.
• Superior Engine Protection: Provides unsurpassed wear protection, safeguarding internal engine parts from metal-on-metal contact better than other leading synthetic motor oils.
• Meets Modern Engine Requirements: Licensed and meets GM’s dexos 1 Gen 2 specifications, ensuring compatibility with today’s advanced engine technologies and stringent car manufacturer requirements.

PENTOSIN ATF 6 1L

Today’s advanced engine technology requires advanced protection. Valvoline Advanced Full Synthetic, the motor oil designed to protect today’s sophisticated engines, contains premium anti-wear additives, superior antioxidants and extra detergents. It protects 40% better against wear, resists oil breakdown 10-times better, and defends 25% more against deposits than industry standards for maximum performance and engine longevity. And with an exceptional range of temperature protection your engine will ready for extreme weather. Valvoline invented motor oil 150 years ago, and we’ve been reinventing it ever since. Get Valvoline Advanced Full Synthetic and give your engine the advanced protection proven to maximize engine life.

Product Features:

• ADVANCED PROTECTION AGAINST the four main causes of engine breakdown: wear friction heat and deposits
• 40% BETTER WEAR PROTECTION vs. industry standard as tested in the Sequence IVB engine test
• 25% BETTER DEPOSIT PROTECTION with superior engine cleaning detergents as tested in the GMOD engine test
• EXCEPTIONAL HIGH/LOW TEMPERATURE PROTECTION defends your motor no matter the weather conditions
• MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN, GM dexos 1 Gen 3
• Enhanced Oil Stability: Resists oil breakdown 10-times better than industry standards, providing consistent performance and reliability.
• Premium Additives: Contains premium anti-wear additives, superior antioxidants, and extra detergents for maximum performance and engine longevity.

Upgrading your motor oil to Valvoline Full Synthetic High Mileage with MaxLife Technology can help you increase the longevity of your car, truck or SUV with over 75,000 miles. It’s proven to protect your high-mileage motor against wear, friction, heat, and deposits – the leading causes of engine breakdown and expensive repairs. Our exclusive formulation goes beyond industry standards to protect your engine. It’s fortified with enhanced wear additives and friction-fighting agents to safeguard critical engine components, extra detergents to clean inside your engine, and premium seal conditioners to restore aging seals and prevent leaks. Superior viscosity modifiers and high-quality base oils help it perform exceptionally in both high and low temperatures. Engineered with ingenuity, tested with tenacity, and proven with purpose, our formula was innovated in America with a century and a half of hands-on experience from the original motor oil brand.

Product Features:

• Enhanced maxlife technology prevents engine breakdown in extreme conditions with 50% better wear protection than the industry standard
• Treat and prevent leaks with premium seal conditioners to keep oil out of places it shouldn’t be
• 25% extra defense against deposits, sludge, corrosion and rust via interior-cleansing detergents
• Extreme temperature protection through our high-quality base oils and superior viscosity modifiers
• Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
• Extends engine life: MaxLife High Mileage Full Synthetic Oil is designed to extend the life of higher mileage vehicles, providing superior protection against wear, friction, heat, and deposits – the leading causes of engine breakdown and expensive repairs

Valvoline ATF+4® is a full-synthetic transmission fluid specifically engineered to protect and prolong the life of (FCA) Fiat Chrysler automatic transmissions. It is officially licensed and approved by FCA and is fully back-serviceable and can be used wherever ATF+3, ATF+2 or ATF+ is specified. Recommended for use in the following applications: Mopar ATF+ MS 7176®, ATF+2® MS 7176, ATF+3 and ATF+4.

Product Features:

• Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
• Enhanced anti-shudder protection for smooth shifting and maximum power transfer
• Developed with anti-wear technology to help improve transmission durability
• Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

Prestone® DOT 3 Motor Vehicle Brake Fluid delivers enhanced performance vs. DOT standards, benefitting all vehicles calling for DOT 3. This synthetic fluid starts with a higher dry boiling point than the DOT minimum standard to protect against overheating, brake fade and performance decline due to water absorption. This extended life (50,000 mile) fluid is also formulated to prevent corrosion of all metals within the braking system.  This formula is safe to use in all DOT 3 braking systems (ABS, disc or drum) and can mix with any DOT 3 fluid.  It is recommended to only use the DOT fluid specified for your car, as using a different DOT product can affect the boiling point or replacement interval if the wrong fluid is used.

Product Features:

• 50,000 Mile Fluid Life
• Prevent Overheating & Brake Fade with High Grade Formula*
• Protects against performance decline due to water absorption. Prevents corrosion of all metals within the braking system.
• Synthetic, Extended Fluid Life Formula

Prestone® MAX DOT 3 Motor Vehicle Brake Fluid is our highest grade formula, maximizing performance vs. DOT standard. Prestone MAX is our best brake fluid at protecting against overheating and brake fade. With 100,000 mile fluid life, our longest life fluid has 2X more miles between replacement than regular Prestone DOT 3. Prestone MAX has superior performance in severe braking conditions when compared to regular Prestone DOT 3, which means even more piece of mind about the braking system. This synthetic fluid starts with our highest dry boiling point giving our best protection against performance decline due to water absorption. Prestone MAX DOT 3 is safe to use in all DOT 3 braking systems, ABS, disc or drum, and can mix with any DOT 3 fluid. Mixing Prestone MAX with other fluids will lower the performance rating for miles and boil points, for best results replace completely with Prestone MAX DOT 3. It is recommended to only use the DOT fluid specified for your car. Using a different DOT product can affect the boiling point or replacement interval if the wrong fluid is used.

Product Features:

• 100,000 Mile Fluid Life
• Prevent Overheating & Brake Fade with Our Highest Grade Formula. Prevents corrosion of all metals within the braking system.
• Superior Protection in Extreme Braking Conditions
• Synthetic, Long Life Formula – 2X Longer than regular Prestone DOT 3

Prestone® Power Steering Fluid (PSF) delivers increased system life. Designed with Anti-wear System Protection, Prestone PSF protects against pump failure, squeals and clogs. This 50,000 mile fluid life is formulated for use in all manufacturers; cars, SUVs, crossovers, and light and medium duty trucks. This a conventional fluid. Many cars 2006 and newer use synthetic based fluids for longer life and better protection. Conventional and synthetic fluids can be mixed but performance and replacement intervals are reduced by the conventional fluid.

Product Features:

• 50,000 Mile Fluid Life
• Anti-Wear Protection = Increased System Life. Protects against pump failure, squeals and clogs. Corrosion protection for metals, rubber & gasket components.
• For use in all manufacturers
• Conventional Formula – For use in all manufacturers

Valvoline High Performance Gear Oil is an extreme pressure gear lubricant formulated with quality base oils and superior additives that helps protect against severe temperatures, shock loads, scuffing, scouring, corrosion and pitting in high speed, high load, high torque and high horsepower conditions.

Product Features:

• Formulated for reliable gear protection
• Protects against severe temperatures to help extend service life
• Formulated with extreme-pressure additives to minimize gear wear from shock loads
• Helps protect against gear wear from scuffing, scouring, corrosion and pitting
• Recommended for conventional hypoid differentials and non-synchronized manual transmissions in passenger cars, light trucks, sport utility vehicles, vans and heavy-duty trucks where an API-GL5 or GL-4 fluid is specified
• PLEASE NOTE: Valvoline recommends SynPower Full Synthetic Gear Oil for limited slip differentials

Prestone® Power Steering Fluid + Stop Leak (PSF+SL) delivers increased system life and prevents & stops system leaks. Stop Leak additives renew, restore and condition seals in the power steering system. These seals harden and shrink over time which are the likely cause of leaks. The stop leak additives also prevent leaks by rejuvenating seals before they leak. Also designed with Anti-wear System Protection, Prestone PSF+SL protects against pump failure, squeals and clogs. This 50,000 mile fluid life is formulated for use in all manufacturers; cars, SUVs, crossovers, and light and medium duty trucks. This a conventional fluid. Many cars 2006 and newer use synthetic based fluids for longer life and better protection. Conventional and synthetic fluids can be mixed but performance and replacement intervals are reduced by the conventional fluid.

Product Features:

• 50,000 Mile Fluid Life
• Includes Stop Leak Additives to prevent and stop power steering system leaks.
• Anti-Wear Protection = Increased System Life. Protects against pump failure, squeals and clogs. Corrosion protection for metals, rubber & gasket components.
• Conventional Formula – For use in all manufacturers

Prestone® Power Steering Fluid + Stop Leak (PSF+SL) delivers increased system life and prevents & stops system leaks. Stop Leak additives renew, restore and condition seals in the power steering system. These seals harden and shrink over time which are the likely cause of leaks. The stop leak additives also prevent leaks by rejuvenating seals before they leak. Also designed with Anti-wear System Protection, Prestone PSF+SL protects against pump failure, squeals and clogs. This 50,000 mile fluid life is formulated for use in all manufacturers; cars, SUVs, crossovers, and light and medium duty trucks. This a conventional fluid. Many cars 2006 and newer use synthetic based fluids for longer life and better protection. Conventional and synthetic fluids can be mixed but performance and replacement intervals are reduced by the conventional fluid.

Product Features:

• 50,000 Mile Fluid Life
• Includes Stop Leak Additives to prevent and stop power steering system leaks.
• Anti-Wear Protection = Increased System Life. Protects against pump failure, squeals and clogs. Corrosion protection for metals, rubber & gasket components.
• Conventional Formula – For use in all manufacturers

Prestone® MAX American Vehicles Power Steering Fluid (PSF) + Stop Leak maximizes and increases system life + the power to stop leaks. Stop Leak additives renew, restore and condition seals in the power steering system. These seals harden and shrink over time which are the likely cause of leaks. This formula is also great at preventing leaks by rejuvenating seals before they leak. This synthetic fluid is designed with 2X Anti-wear System Protection, which means more protection against pump failure, squeals and clogs. 100,000 mile fluid life, 2X more than conventional fluid, extends the time between replacement. This fluid is formulated for American vehicle manufacturers: Ford, Lincoln, Mercury, Dodge, Ram, Jeep, Chrysler, GMC, Chevrolet, Buick, Cadillac, Pontiac, Oldsmobile and others. Many cars 2006 and newer use synthetic based fluids for longer life and better protection. Conventional and synthetic fluids can be mixed but performance and replacement intervals are reduced by the conventional fluid.

Product Features:

• 100,000 Mile Fluid Life. Synthetic Formula for longer life and more protection
• MAX + Stop Leak. Stop Leak Additives to prevent and stop power steering system leaks.
• For use in American vehicle manufacturers: Ford, Lincoln, Mercury, Dodge, Ram, Jeep, Chrysler, GMC, Chevrolet, Buick, Cadillac, Pontiac, Oldsmobile and other
• 2X Anti-Wear Protection for enhanced System Life vs. conventional fluid. More protection against pump failure, squeals and clogs