1982 Mercedes-Benz 300CDT Drivetrains
More 1982 Mercedes-Benz 300CDT Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1982 Mercedes-Benz 300CDT, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1982 Mercedes-Benz 300CDT Drivetrains
GKN Drivetech – CV Boot Kit (Part No.K601016585LOB)
from
$56.79
CV Boot Kit
National – Bearings (Part No.206)
from
$25.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
SKF – Wheel Bearing (Part No.K800023845SKF)
from
$59.16
SKF is a supplier of original equipment wheel bearings, hubs and seals to most of the world’s leading automakers. Engineered and manufactured to the highest quality standards, SKF wheel bearings greatly reduce friction and increase load-carrying capabilities. With an ability to boost reliability under heavy loads and misaligned conditions, SKF wheel bearings offer an ideal solution for many wheel end applications.
Product Features:
See More
Product Features:
- Precision bearing pre-load and correct application of advanced manufacturing techniques such as orbital rolling
- 100% tested to the actual OE specifications per part number for fit, form and function
- High quality steel and surface finishes
- Proper implementation of heat treatment
Elring – Differential Side Cover Seal (Part No.J704136486ELR)
from
$25.23
Differential Side Cover Seal
Dorman – Uni-Fit C.V. Joint Boot Kit Outer up to 3.58 In. Diameter (Part No.614-001)
from
$29.49
This CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself
- Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Rein – Driveshaft Support Boot (Part No.K1051103910RIN)
from
$5.49
The Rein Driveshaft Support Boot is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
National – Bearings (Part No.M86610)
from
$9.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.A-5)
from
$16.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.LM503349A)
from
$22.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.201-CC)
from
$15.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.VV324)
from
$12.79
Product Features:
See More
- High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks
- Long-life friction modifiers and premium base oils help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
- Enhanced cleaning additives help reduce varnish formation and keep the transmission running properly longer
- Engineered with a unique blend of viscosity modifiers and base oils to provide better oil flow at low temperatures and greater film protection at higher temperatures
APA/URO Parts – Driveshaft End Bushi (Part No.K105415318APA)
from
$22.49
Driveshaft End Bushi
Driveworks – Tapered Roller Bearing (Part No.S-HM-89449)
SKF – Differential Pinion Bearing (Part No.J702012211SKF)
from
$46.72
Differential Pinion Bearing
Febi – Pinion Shaft Nut (Part No.J7030847447FEB)
from
$6.70
Pinion Shaft Nut
Rein – Drive Shaft-Ctr Support Bearng (Part No.BEM0039P)
from
$13.99
Drive Shaft-Ctr Support Bearng
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6118)
from
$97.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to MERCEDES 84-89;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1984-1989
- Weight approx: 1 Lbs
- BEARING ID / BORE: 1.0001 INCH / 25 MM
- CENTERLINE: 0.50 INCH / 13 MM
- MOUNT WIDTH: 4.75 INCH / 121 MM
- STYLE: ROUND FRAME
- WITH WINGS
SKF – Drive Shaft Support Bearing (Part No.K1040100111SKF)
from
$43.52
Rugged SKF drive shaft support bearings are built to meet or exceed OE specifications. The Support Bearings are also built on the years of experience that SKF has earned designing and supplying bearings to the world’s largest OE manufacturers. Engineered and manufactured to specific application requirements that deliver precise drive shaft alignment and support. Center support bearings are pre-lubricated and sealed with metal reinforced seals to prevent contamination. Rubber support cushions are manufactured from durable rubber compounds that provide maximum support while isolating the driveline shaft from damaging vibration. Drive shaft support frames are constructed from high quality steel or aluminum that provides additional strength and long life in harsh environments.
Product Features:
See More
Product Features:
- Original equipment design and quality
- Utilizes OE equivalent or better materials
- Pre-Lubricated and reinforced seals
- Rubber support cushions are manufactured from durable rubber compounds
- Support frames are constructed from high quality steel or aluminum
Dorman – Driveshaft Flex Coupler (Part No.935-503)
from
$51.99
This drive shaft coupler is designed to match the fit and function of the original coupler on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft coupler is designed to match the fit and function of the original coupler on specified vehicles
- Restores functionality – reliable replacement for an original coupler that has failed due to wear or damaged due to collision
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Meyle – Differential Mount (Part No.J707016071MEY)
from
$79.15
Differential Mount
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV48998)
from
$212.99
Carquest CV Axle’s are made from the finest materials using premium steel, boot, and grease. Carquest CV Axles are designed to exceed the original equipment specifications for a trouble free ride.
Product Features:
See More
Product Features:
- High moly CV joint grease with stainless-steel boot bands
Popular 1982 Mercedes-Benz 300CDT Drivetrains Categories
1982 Mercedes-Benz 300CDT Drivetrains
You count on your 1982 Mercedes-Benz 300CDT to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 26 Drivetrains ranging in price from $5.49 to $212.99, you’re sure to find everything you need for your 1982 Mercedes-Benz 300CDT.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 12 different brands like Valvoline, National, and Dorman. 1982 Mercedes-Benz 300CDT Drivetrains start as low as $5.49!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 538 extensive product reviews on 1982 Mercedes-Benz 300CDT Drivetrains. Some of the top-rated Drivetrains products we carry are CV Axle Shaft Assembly with 3.4 stars and Bearings with 5.0 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1982 Mercedes-Benz 300CDT below to get started!
Top-Rated Drivetrains Brands For Your 1982 Mercedes-Benz 300CDT
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1982 Mercedes-Benz 300CDT running right for years to come. In our inventory you’ll find brands like Valvoline, National, Dorman, and even more.
Popular Valvoline Drivetrains
You’ll find popular Valvoline brand products across Differentials. All are waiting to get your 1982 Mercedes-Benz 300CDT back on the road. Some of the top-rated Valvoline products in these categories are:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 1982 Mercedes-Benz 300CDT Drivetrains
What are the most purchased Drivetrains for the 1982 Mercedes-Benz 300CDT?
Out of 26 Drivetrains for the 1982 Mercedes-Benz 300CDT, the most popular in our inventory are:
What are the top-rated 1982 Mercedes-Benz 300CDT Drivetrains?
Top-rated Drivetrains for your 1982 Mercedes-Benz 300CDT based on customer reviews/ratings are:
from
$212.99
(7)
CV Axle Shaft Assembly
“Cost effective replacement found on AAP. Just replaced today. Seems fit nicely.”
from
$13.99
(2)
Bearings
“Fit perfectly into my Nissan Frontier’s 4WD wheel hub. Only time will tell its’ durability. Advance Auto Parts had the best price by a considerable ma”
