1982 Ford Mustang Vehicle Hoods

Essential 1982 Ford Mustang Vehicle Hoods

StrongArm – Trunk Lift Support: 19.1" Ext Length, 7.55" Travel, 39 Lbs of Force, 1 Pk (Part No.D4643)

Trunk Lift Support: 19.1" Ext Length, 7.55" Travel, 39 Lbs of Force, 1 Pk

from

$16.79
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:
  • Heavy Gauge Steel Body
  • Self-Cleaning Piston Assembly
  • Rubber O-Ring Piston Seal
See More

(3 reviews)
View Product

Stabilus – Gas Charged Trunk Strut (Part No.O2064181667STB)

Gas Charged Trunk Strut

from

$18.12
STABILUS gas-charged lift supports make it easy and safe to raise and lower heavy hoods, rear hatches and tailgates by hand. Compact design, high functional comfort and integrated operating safety expand the range of applications for STABILUS products in utility vehicle design. As the world’s leading manufacturer of lift supports, STABILUS can provide exact replacements for practically any application where a lift support is used.

Product Features:
  • Restores the original opening and closing speeds of your hood, hatch or trunk
  • Easy-to-install
  • No special tools required
  • Engineered for your application
  • Easy lifting and reduced closing effort
  • Consistent lifting force through 50,000 cycles
  • Rust-resistant piston rod extends product life
  • Dynamic damping technology, available on select lift supports
See More
View Product

StrongArm – Trunk Lift Support: 11.3" Ext Length, 3.25" Travel, 76 Lbs of Force, 1 Pk (Part No.E6457)

Trunk Lift Support: 11.3" Ext Length, 3.25" Travel, 76 Lbs of Force, 1 Pk

from

$40.99
Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.

Product Features:
  • Exact fit original equipment design guarantees correct fit and function
  • Engineered and built to meet or exceed original equipment quality standards
  • Individually tested for performance and reliability
  • Hardened, nitride plated steel shaft provides optimal durability
  • Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
  • Heavy gauge steel body is electrostatically painted and heat cured to OE specs
  • Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
  • Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
  • No special installation tools required
  • Consistent Performance In All Weather Conditions
  • Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
  • Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle
See More
View Product

StrongArm – Tailgate Lift Support: 19.7" Ext Length, 7.95" Travel, 130 Lbs of Force, 1 Pk (Part No.D4408)

Tailgate Lift Support: 19.7" Ext Length, 7.95" Travel, 130 Lbs of Force, 1 Pk

from

$27.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:
  • Heavy Gauge Steel Body
  • Self-Cleaning Piston Assembly
  • Rubber O-Ring Piston Seal
See More
View Product

StrongArm – Trunk Lift Support: 11.3" Ext Length, 3.25" Travel, 88 Lbs of Force, 1 Pk (Part No.E6408)

Trunk Lift Support: 11.3" Ext Length, 3.25" Travel, 88 Lbs of Force, 1 Pk

from

$21.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:
  • Heavy Gauge Steel Body
  • Self-Cleaning Piston Assembly
  • Rubber O-Ring Piston Seal
  • Non-Stick Back-Up Ring
  • Hardened Nitride Plated Steel Shaft
  • Engineered In USA To OE Quality Standards For Performance And Durability
  • IATF 16949, ISO 9001 Certified; Passes Extensive Quality Checks And Testing
  • Easy To Install In Just Minutes. No Special Tools Required.
  • Exact Fit Original Equipment Design Guarantees Correct Fit And Function
  • Consistent Performance In All Weather Conditions
  • Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
  • Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle
See More
View Product

Atlas Lift – Lift Support (Part No.LS10156)

Lift Support

from

$22.99
Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:
  • Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
  • Easy Install – Less than 15 Minutes! based on average install time across all parts
  • No Special Tools Required
  • Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
  • OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
  • OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
  • World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
  • Trilingual Install Instructions provided inside each package
See More
View Product

StrongArm – Liftgate Lift Support: 19.65" Ext Length, 8.0" Travel, 140 Lbs of Force, 1 Pk (Part No.D4686)

Liftgate Lift Support: 19.65" Ext Length, 8.0" Travel, 140 Lbs of Force, 1 Pk

from

$25.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:
  • Heavy Gauge Steel Body
  • Self-Cleaning Piston Assembly
  • Rubber O-Ring Piston Seal
See More

(5 reviews)
View Product

Dorman – Ford Hood Insulation Retainer (Part No.963-006D)

Ford Hood Insulation Retainer

from

$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More
View Product

1982 Ford Mustang Vehicle Hoods

Maybe you’re in the middle of a full rebuild of that 1982 Ford Mustang. Maybe you just need a couple of Vehicle Hoods. Either way, Advance Auto Parts has 4 different Vehicle Hoods in our inventory ranging from $4.49 to $27.99. That means you can find the exact parts or products you need to keep that 1982 Ford Mustang running smoothly.

Vehicle Hoods are only as good as their brand. We stock 3 different brands to make sure you have plenty of trusted parts to choose from for your 1982 Ford Mustang. StrongArm, Dorman, and Atlas Lift are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Vehicle Hoods for your 1982 Ford Mustang, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Vehicle Hoods to keep your 1982 Ford Mustang rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Vehicle Hoods Brands To Make Your 1982 Ford Mustang Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1982 Ford Mustang demands trusted brand parts and products to keep it running. Many trusted brands of Vehicle Hoods make up Advance Auto Parts’ inventory, and all are ready to help make your Mustang the best it can be. Be sure to browse some of our top Vehicle Hoods brands and parts.