1982 Ford F-250 Pickup Towing Products

Essential 1982 Ford F-250 Pickup Towing Products

CARR – Cab Mount, Multi-Fit, Single, Flat Step, Powder Coated, Black, Aluminum (Part No.124031-1)

Cab Mount, Multi-Fit, Single, Flat Step, Powder Coated, Black, Aluminum

from

$148.99
The stylish and innovative design of these steps add to a vehicle rugged off-road look. Available in three low maintenance, extremely durable finishes to complement your vehicle appearance. Easily installed using our new multi mount system for superior strength and rigidity. Rocker panel installation provides for the strongest and easiest installation of any step products.

Product Features:
  • Exclusive New Multi Mount System
  • Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
  • Rugged Tread Pattern Provides For Safe And Attractive Non Slip Surface
  • Unique Design Gives The Vehicle A Rugged Off-Road Look, While Being A Stylish Accent For Today Vehicles
  • Strong Construction To Hold Up Under Extreme Conditions
  • Black Powder Coat Finish Features A Lightly Textured Matte Finish That Resists Scratching, Peeling And Fading
  • Strongest And Easy Installation
See More

CARR – Cab Mount, Multi-Fit, Set Of 2, Flat Step, Polished Aluminum, 14" L (Part No.114032)

Cab Mount, Multi-Fit, Set Of 2, Flat Step, Polished Aluminum, 14" L

from

$279.99
LD step will give the user easier access to the vehicle due to the wider and deeper stepping surface which extends further than our other steps. The LD step is available in our three durable finishes, and installation is a cinch with our mounting system.

Product Features:
  • Easier Entry And Exit From Your Vehicle
  • Wide Functional Step Area
  • Extends Further Than Our Current Steps
  • Made Of Corrosion Resistant, Durable Cast Aluminum Alloy For Extreme Longevity
  • New Aggressive And Appealing Tread Design For A Non-Slip Surface
  • Unique Design That Enhances The Looks Of Current Vehicle Body Styles
  • Resists Scratches, Peeling And Fading
  • Rocker Panel Installation Provides For The Strongest And Easiest Installation Of Any Step Products
See More

CURT – Replacement OE 4-Way Flat Socket (T s into USCAR) (Part No.55384)

Replacement OE 4-Way Flat Socket (T s into USCAR)

from

$33.49
Stress is the last thing you should feel when towing a trailer — whether you’re hauling your RV to that favorite camping destination, your ATVs up to the hunting grounds or your fishing boat to the new hidden hotspot. At CURT, we think your towing equipment should add to the enjoyment of your experience, not detract from it. CURT custom wiring connectors are the easiest way to outfit your vehicle with a CURT trailer wiring connection. They are built with some of the most advanced technology in the industry, and each one is custom-fitted to work with a specific make and model. Some automotive manufacturers install a special socket on the vehicle to be used for vehicle-to-trailer wiring. Though this special socket is not equipped on every vehicle, a CURT custom wiring connector (also called a T-connector) utilizes the socket for simple, stress-free installation. Rather than requiring you to cut, splice and solder into your vehicle’s wiring system, the custom wiring connector uses a single OEM-compatible plug and instantly provides a standard vehicle-to-trailer wiring connection, typically in the form a 4-way flat. All CURT custom wiring connectors are made vehicle-specific for the easiest possible installation and the best fit. This particular connector provides a 4-way flat socket while retaining use of the existing OEM socket. It is designed to be a custom wiring option for a variety of vehicles (see application info to verify fitment with your vehicle). It comes with a dust cover to keep the connector socket clean when not in use.

Product Features:
  • Plugs into USCAR connection to add 4-way flat and retain use of existing socket
  • Simple plug-and-play design eliminates the need for cutting or splicing
  • 4-way flat output connects tail lights, brake lights and turn signals
  • Dust cover included to keep connector clean when not in use
  • Slit loom keeps wires contained and well protected
See More

CURT – Custom Wiring Harness (7-Way RV Blade Output) (Part No.55242)

Custom Wiring Harness (7-Way RV Blade Output)

from

$89.99
CURT custom wiring is made with some of the most sophisticated technology in the industry and is designed to install with ease, giving you a long-lasting electrical connection for your towing setup. If your vehicle is not equipped with wiring for towing a trailer, CURT custom wiring is the ideal solution. A custom wiring harness (also called a T-connector) is a simple, plug-and-play electrical device that plugs into your vehicle’s electrical system and provides a standard trailer wiring connection. This is done using two or more vehicle-specific, OEM-compatible connectors to plug into the taillight assembly, eliminating the need for cutting, splicing and soldering during installation. Custom wiring harnesses are made vehicle-specific, and while they are not available for all vehicles, they do offer one of the fastest, easiest and most secure ways to wire a vehicle for towing. This particular harness provides a 7-way RV blade connector socket and is designed to be a custom wiring harness for certain years of the Ford F150, F150 Heritage and F250 (see application info to verify fitment). It comes with all necessary wiring components to establish a reliable trailer wiring connection, as well as a dust cover to keep the connector clean when not in use. You have a picture in mind of your next destination — maybe it’s the boat landing at your favorite fishing spot, maybe it’s a campsite that overlooks one of nature’s masterpieces, or maybe it’s the next big jobsite. However, turning that picture into a reality takes more than just daydreaming. It takes a solid connection and the right amount of power.

Product Features:
  • Plugs into vehicle tail light assembly to provide a 7-way RV blade socket
  • Simple plug-and-play design eliminates the need for cutting or splicing
  • 7-way connects tail, brake, reverse, turn signals, brakes and auxiliary power
  • Spring-loaded dust cover keeps connector clean when not in use
  • Slit loom keeps wires contained and well protected
See More

CURT – Double Lock Gooseneck Hitch (Part No.60607)

Double Lock Gooseneck Hitch

from

$319.99
A CURT gooseneck hitch is more than a necessary tool for towing; it is an integrated extension of your truck that allows you turn your 4×4 into the workhorse it was designed to be. Gooseneck hitches are stronger, tougher and more subtle than any other, and when quality craftsmanship and intelligent design become the fuel that drives a gooseneck hitch, you get a towing solution that leaves others lost for words. The CURT under-bed Double Lock gooseneck hitch is strong, fast and easy to operate. It gets its name from the two locking pins that engage the trailer ball and hold it in place, giving you twice the security when towing especially heavy trailers. The Double Lock mounts underneath your truck bed with compatible gooseneck installation brackets and provides a removable 2-5/16″ gooseneck trailer ball with a gross trailer weight capacity up to 30,000 lbs. and a tongue weight capacity of 7,500 lbs. Using the heavy-duty operating handle, the trailer ball can be unlocked and flipped over whenever necessary to allow full use of the truck bed. The Double Lock comes with solid safety chain hookups, an attractive chrome trim ring, a durable A-coat finish and a limited lifetime warranty. This particular Double Lock gooseneck hitch is design to fit several models of Chevrolet, GMC, Dodge, Ram, Ford and Toyota (for a complete listing of vehicle and installation bracket compatibility, see application info).

Product Features:
  • Double locking pins for superior trailer and trailer ball security
  • Flip-and-store ball keeps truck bed free of obstructions
  • Removable chrome-plated 2-5/16″ trailer ball fits most gooseneck trailers
  • Installation requires no welding or truck bed removal
  • Heavy-duty handle can be positioned on either side of the vehicle
  • Chrome-plated trim ring provides a finished look
  • Rubber hole cover helps prevent corrosion in trailer ball hole
  • Includes spring-loaded safety chain loops and grade-8 hardware
  • Protected by a durable A-coat finish
See More

CURT – Over-Bed Fixed Ball Gooseneck Hitch (Part No.61100)

Over-Bed Fixed Ball Gooseneck Hitch

from

$165.99
CURT fixed ball gooseneck hitches are built to deliver all the towing power you need to tackle the demands of the job, without breaking the bank. When your day starts the moment you climb into the seat of that full-size 4×4 pickup, your towing equipment needs to be a reliable extension of your truck. CURT fixed ball gooseneck hitches are a permanent towing solution that offer reliable strength at an economical price. This CURT fixed ball hitch features an over-bed design, installing directly on top of your truck bed using CURT over-bed gooseneck installation brackets. It offers a gross trailer weight capacity up to 30,000 lbs. to allow you to tow whatever heavy-duty trailer you need, from point A to point B, whether a livestock trailer full of horses, a flatbed piled with building materials or a car hauler carrying a backhoe. This fixed ball gooseneck hitch also comes with a standard 2-5/16″ gooseneck trailer ball welded onto a thick 12″ x 12″ steel plate. The fixed design ensures the ball can never be loosened or stolen, increasing safety on the road and preventing theft. Also, to ensure that CURT fixed ball gooseneck hitches can indeed be called CURT hitches, we finish them in a durable carbide powder coat that provides the necessary protection against rust, wear and other everyday threats you meet off the beaten path. For the best quality and durability in gooseneck towing, CURT is the obvious choice. We carefully engineer, test and manufacture our gooseneck hitches to meet today’s safety standards and exceed all expectations. For a gooseneck hitch with all the quality of a CURT hitch and the economy to keep your wallet full, there is nothing like a CURT fixed ball gooseneck hitch.

Product Features:
  • Accepts up to 30,000 lbs. GTW and 7,500 lbs. vertical load limit
  • 2-5/16″ trailer ball fits all standard gooseneck trailers
  • Permanently attached gooseneck ball eliminates theft and loss
  • Protected by a highly durable carbide powder coat finish
  • Reinforcement required to reach max gross trailer weight rating
  • Safety chain hookup loops #66113 sold separately
  • Assembled in USA
  • Limited lifetime warranty (one-year finish, one-year parts)
See More

CURT – Trailer Hitch: 2" Receiver, 10,000 LB Capacity, Installs as low as 60 Mins (Part No.14001)

Trailer Hitch: 2" Receiver, 10,000 LB Capacity, Installs as low as 60 Mins

from

$239.99
Whatever the next item is on your to-do list — whether it’s arriving at the jobsite before dawn or getting your travel trailer set up in time to see the sunset — CURT class 4 trailer hitches offer greater towing power to let you Bring It. These custom receiver hitches are built to tackle bigger jobs and bolder adventures, all while giving you a custom fit for your vehicle. Class 4 hitches are available for a variety of makes and models, from pickup trucks and SUVs to full-size and commercial vans. This particular class 4 hitch fits certain years of the Dodge D100, D150, D200, D250, D300, D350, Ram 1500, 2500 or 3500 and Ford Bronco, F100, F150, F250, F250 HD or F350 (to verify vehicle compatibility, see application info). It provides a weight carrying capacity of 10,000 lbs. GTW and 1,000 lbs. TW. It can also accept a weight distributing hitch, offering a maximum WD capacity of 12,000 lbs. and a WDTW of 1,200 lbs. CURT class 4 tow hitches are as much suited for work as they are for play. With their high load capacities, they are typically used for towing larger trailers, including everything from a double-axle utility trailer or livestock trailer to a full-length camper or large boat trailer (NOTE: Never exceed the lowest weight capacity of any towing component). All CURT class 4 receiver hitches come with a 2″ receiver tube opening and all the necessary hardware for a complete installation. From light-duty to heavy-duty, every CURT custom hitch is engineered to be vehicle-specific, using actual vehicles to create the optimal design. We then combine high-strength steel, precise welding and a co-cured finish of liquid A-coat and durable black powder coat to provide you with a hitch you can depend on. To prove it, we test all our hitches in accordance with SAE J684 for safety.

Product Features:
  • Rated to 10,000 lbs. gross trailer weight and 1,000 lbs. tongue weight
  • Compatible with weight distribution hitch (12,000 lbs. WD / 1,200 lbs. WDTW)
  • Engineered with a vehicle-specific design for a custom fit
  • Concealed main body for OE look and seamless integration with the vehicle
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Equipped with an open-back receiver for easy cleaning
  • Made in USA (may include imported hardware)
See More

CURT – Trailer Hitch: 2" Receiver, 6,000 LB Capacity, Installs as low as 60 Mins (Part No.13028)

Trailer Hitch: 2" Receiver, 6,000 LB Capacity, Installs as low as 60 Mins

from

$199.99
Whatever your task at hand — whether it’s launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close — CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Chevy Silverado 3500, C30, C3500, C3500HD, Ford F Super Duty, F350, F350 Super Duty, F450 Super Duty, F550 Super Duty, GMC C3500, C3500HD and K3500 (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 6,000 lbs. GTW and 600 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 10,000 lbs. WD and 1,000 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2″ receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.

Product Features:
  • Rated to 6,000 lbs. gross trailer weight and 600 lbs. tongue weight
  • Compatible with weight distribution hitch (10,000 lbs. WD / 1,000 lbs. WDTW)
  • Engineered with a vehicle-specific design for a custom fit
  • Concealed main body for OE look and seamless integration with the vehicle
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Equipped with an open-back receiver for easy cleaning
  • Made in USA (may include imported hardware)
See More

Dorman – Electrical – Trailer Wiring Accessories, Trailer Plug-In for Ford (Part No.86072)

Electrical - Trailer Wiring Accessories, Trailer Plug-In for Ford

from

$21.99
Convenient repair and replacement options for simple trailer wiring repairs.
See More

Dorman – Electrical – Trailer Wiring Accessories, Trailer Plug-In for Ford (Part No.86070)

Electrical - Trailer Wiring Accessories, Trailer Plug-In for Ford

from

$22.99
Convenient repair and replacement options for simple trailer wiring repairs.
See More

CURT – Trailer Hitch: 2" Receiver, 10,000 LB Capacity, Installs as low as 60 Mins (Part No.14082)

Trailer Hitch: 2" Receiver, 10,000 LB Capacity, Installs as low as 60 Mins

from

$309.99
Whatever the next item is on your to-do list — whether it’s arriving at the jobsite before dawn or getting your travel trailer set up in time to see the sunset — CURT class 4 trailer hitches offer greater towing power to let you Bring It. These custom receiver hitches are built to tackle bigger jobs and bolder adventures, all while giving you a custom fit for your vehicle. Class 4 hitches are available for a variety of makes and models, from pickup trucks and SUVs to full-size and commercial vans. This particular class 4 hitch fits certain years of the Chevy C30, C3500, C3500HD or Silverado 3500, Ford F Super Duty, F350, F350 Super Duty, F450 Super Duty or F550 Super Duty and GMC C3500, C3500HD or K3500 (to verify vehicle compatibility, see application info). It provides a weight carrying capacity of 10,000 lbs. GTW and 1,000 lbs. TW. It can also accept a weight distributing hitch, offering a maximum WD capacity of 12,000 lbs. and a WDTW of 1,200 lbs. CURT class 4 tow hitches are as much suited for work as they are for play. With their high load capacities, they are typically used for towing larger trailers, including everything from a double-axle utility trailer or livestock trailer to a full-length camper or large boat trailer (NOTE: Never exceed the lowest weight capacity of any towing component). All CURT class 4 receiver hitches come with a 2″ receiver tube opening and all the necessary hardware for a complete installation. From light-duty to heavy-duty, every CURT custom hitch is engineered to be vehicle-specific, using actual vehicles to create the optimal design. We then combine high-strength steel, precise welding and a co-cured finish of liquid A-coat and durable black powder coat to provide you with a hitch you can depend on. To prove it, we test all our hitches in accordance with SAE J684 for safety.

Product Features:
  • Rated to 10,000 lbs. gross trailer weight and 1,000 lbs. tongue weight
  • Compatible with weight distribution hitch (12,000 lbs. WD / 1,200 lbs. WDTW)
  • Engineered with a vehicle-specific design for a custom fit
  • Concealed main body for OE look and seamless integration with the vehicle
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Equipped with an open-back receiver for easy cleaning
  • Made in USA (may include imported hardware)
See More

CURT – Trailer Hitch: 2" Receiver, 6,000 LB Capacity, Installs as low as 60 Mins (Part No.13099)

Trailer Hitch: 2" Receiver, 6,000 LB Capacity, Installs as low as 60 Mins

from

$396.99
Whatever your task at hand — whether it’s launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close — CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits older years of Ford, GMC and Chevy pickup trucks (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 6,000 lbs. GTW and 600 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 10,000 lbs. WD and 1,000 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2″ receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.

Product Features:
  • Rated to 6,000 lbs. gross trailer weight and 600 lbs. tongue weight
  • Compatible with weight distribution hitch (10,000 lbs. WD / 1,000 lbs. WDTW)
  • Engineered with a vehicle-specific design for a custom fit
  • Concealed main body for OE look and seamless integration with the vehicle
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Equipped with an open-back receiver for easy cleaning
  • Made in USA (may include imported hardware)
See More

Husky Towing – Class Iii, Square Tube, 2"Receiver, 6000Lb Weight Carrying/ 600Lb Tongue (Part No.69571C)

Class Iii, Square Tube, 2"Receiver, 6000Lb Weight Carrying/ 600Lb Tongue

from

$331.99
Husky receiver hitches are design engineered and precision welded with a seamless collar for strength and reliability. Each hitch features an open back receiver for easy cleaning and is protected inside and out with an industry-leading rust-resistant finish. All Husky receiver hitches are rigorously tested to meet SAE J684 standards for safety. With a full line of unique applications, Husky receiver hitches offer a custom fit solution for nearly every vehicle on the road today.

Product Features:
  • Manufactured With A Vehicle-Specific Design For A Custom Fit
  • Precisely-Welded For Superior Strength And Fit
  • Co-Cured In A Rust-Resistant Liquid Bonderite Coating
  • Strengthened With A Welded, Seamless Collar
  • Open-Back Receiver For Easy Cleaning
See More

CURT – Trailer Hitch: 2" Receiver, 16,000 LB Capacity, Installs as low as 60 Mins (Part No.15300)

Trailer Hitch: 2" Receiver, 16,000 LB Capacity, Installs as low as 60 Mins

from

$279.99
When we came to the limits of towing capacity, we wanted to know what else was out there. What could we discover off the beaten path? So, we kept going. CURT class 5 Xtra Duty hitches begin a class of their own, beyond class 4 and beyond anything the standards dictate. They are designed for the hard road where only full-size pickup trucks, vans and SUVs dare to tread. They are capable of pulling almost any heavy-duty trailer, including toy haulers, dump trailers, logging trailers, small yacht trailers and more (NOTE: Never exceed the lowest weight capacity of any towing component). This particular Xtra Duty class 5 trailer hitch offers a gross trailer weight capacity of 16,000 lbs. and an extra-high tongue weight capacity of 2,400 lbs. It features a 2″ x 2″ receiver tube opening to accept a ball mount or hitch-mounted accessory, such as a cargo carrier or winch mount. It is designed to be a custom-fit trailer hitch for certain years of the Dodge D100, D150, D200, D250, C300, D350, Ram 1500, 2500 or 3500 and Ford Bronco, F100, F150, F250, F250 HD or F350 (to verify compatibility with your vehicle, see application info). For a little extra towing power and stability, this class 5 hitch can also be used in combination with a weight distributing hitch. It is rated for 17,000 lbs. WD and 2,400 lbs. WDTW. In our drive to create a more powerful hitch, CURT has not neglected the finer details. Our class 5 trailer hitches are welded with precision and go through multiple stages of cleaning to create a smooth surface that is ready to accept our co-cured finish. To protect them from corrosion, chipping and UV damage, these hitches are immersed in a liquid A-coat and then finished in a high-quality black carbide powder coat. They come with grade-8 mounting hardware for solid installation.

Product Features:
  • Rated to 16,000 lbs. gross trailer weight and 2,400 lbs. tongue weight
  • Compatible with weight distribution hitch (17,000 lbs. WD / 2,400 lbs. WDTW)
  • Engineered with a vehicle-specific design for a custom fit
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Constructed with a large, powerful main body
  • Protected by a highly durable carbide powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Features wide safety chain openings for heavy-duty hooks
  • Equipped with an open-back receiver for easy cleaning
  • Made in USA (may include imported hardware)
See More

CURT – Front Mount Hitch with 2in. Receiver (Part No.31310)

Front Mount Hitch with 2in. Receiver

from

$252.99
A CURT front trailer hitch allows you to use the front end of your vehicle for a variety of towing applications. They can be used for mounting a winch, a snow plow, a number of towing accessories and can even be used for some trailering applications. When space is limited, a front trailer hitch is commonly used to hold a cargo carrier, freeing up space inside the vehicle for extra cargo and making the rear mount receiver available to pull a trailer. At the boat ramp, your boat trailer can be hitched up to the front receiver hitch, giving you better control over the trailer as you launch. Some of the other accessories that can be used with a front tow hitch are the CURT winch mount, step pad, license plate holder, spare tire mount, skid shield and tow hooks. All CURT front trailer hitches provide a useful receiver tube to accept a 2″ x 2″ shank, and they are commonly used on trucks, vans and SUVs. This front trailer hitch is rated for 5,000 lbs. GTW and 500 lbs. TW. It also has a straight-line pull rating of 9,000 lbs. It is designed to be a custom trailer hitch for certain years of the Ford F250 and F350 (to verify your vehicle compatibility, see application info). It comes with all necessary hardware for a complete installation and is backed by a limited lifetime warranty.

Product Features:
  • Rated to 5,000 lbs. gross trailer weight and 500 lbs. tongue weight
  • Compatible with a tow hook or shackle mount (9,000 lbs. straight-line pull)
  • Engineered with a vehicle-specific design for a custom fit
  • Provides a convenient mount for hitch accessories
  • Ideal for attaching a snow plow, cargo carrier or other front hitch mount
  • Allows for easy maneuvering of a trailer into a tight spot
  • Concealed main body for OE look and seamless integration with the vehicle
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Equipped with an open-back receiver for easy cleaning
See More

Dee Zee – Dee Zee Headache Rack Mount, Rectangle, Black, Without Light, Side Mount (Part No.DZ95064)

Dee Zee Headache Rack Mount, Rectangle, Black, Without Light, Side Mount

from

$46.49
Add light mounts to your Dee Zee Aluminum or Steel Headache Rack or Rear Rack. With these convenient mounts that slide into the built in channel system, mounting your auxiliary lights is quick and easy. Several size options to meet your needs.

Product Features:
  • Made From Rugged Steel
  • Protective Gloss Black Powder Coat Finish
  • Utilize The Accessory Channel On Aluminum Cab Racks
  • Several Size Options To Meet Your Needs
  • Made In USA
See More

CURT – Trailer Hitch: 2" Receiver, 6,000 LB Capacity, Installs as low as 60 Mins (Part No.13310)

Trailer Hitch: 2" Receiver, 6,000 LB Capacity, Installs as low as 60 Mins

from

$189.99
Whatever your task at hand — whether it’s launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close — CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Dodge D100 Pickup, D150, D200 Pickup, D250, D300 Pickup or D350 and Ford Bronco, F100, F150, F250 or F350 (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 6,000 lbs. GTW and 600 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 10,000 lbs. WD and 1,000 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2″ receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.

Product Features:
  • Rated to 6,000 lbs. gross trailer weight and 600 lbs. tongue weight
  • Compatible with weight distribution hitch (10,000 lbs. WD / 1,000 lbs. WDTW)
  • Engineered with a vehicle-specific design for a custom fit
  • Concealed main body for OE look and seamless integration with the vehicle
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Equipped with an open-back receiver for easy cleaning
  • Made in USA (may include imported hardware)
See More

Dee Zee – Dee Zee Headache Rack Mount, 250 Pound Capacity, Black, Aluminum, 2 Piece (Part No.DZ95002)

Dee Zee Headache Rack Mount, 250 Pound Capacity, Black, Aluminum, 2 Piece

from

$57.99
It does not matter what you haul, you need to make sure to secure it properly in order to protect your truck, yourself and other motorists. Dee Zee Cab Rack Tie Downs offer a reliable method for securing your cargo to your cab rack. Designed to fit into your cab rack integrated channel, our Tie Downs glide along your rack accessory channel tightening into place for virtually endless possibilities.

Product Features:
  • Tie Down Anchor For Cargo
  • Cast Aluminum Finish
  • Fits Into Integrated Channel In Cab Rack
  • No Drilling Required
See More

Milemarker – Winch Hydraulic Fittings (Part No.35-5020-07)

Winch Hydraulic Fittings

from

$124.99
For use with 75 Series and HI Series winches.

Product Features:
  • Winch Hydraulic Fittings
See More

1982 Ford F-250 Pickup Towing Products

You count on your 1982 Ford F-250 Pickup to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Towing Products. With 17 Towing Products ranging in price from $7.99 to $396.99, you’re sure to find everything you need for your 1982 Ford F-250 Pickup.

Brands matter. If you want to shop a specific Towing Products brand, we stock 8 different brands like CURT, Hopkins, and Husky. 1982 Ford F-250 Pickup Towing Products start as low as $7.99!

One of the best ways to find top quality OEM or aftermarket Towing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 25 extensive product reviews on 1982 Ford F-250 Pickup Towing Products.

Did we mention you can order your Towing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Towing Products inventory for your 1982 Ford F-250 Pickup below to get started!

Top-Rated Towing Products Brands For Your 1982 Ford F-250 Pickup

Trusted Towing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1982 Ford F-250 Pickup running right for years to come. In our inventory you’ll find brands like CURT, Hopkins, Husky, and even more.

Popular Hopkins Towing Products

You’ll find popular Hopkins brand products across Trailer Wiring. All are waiting to get your 1982 Ford F-250 Pickup back on the road. Some of the top-rated Hopkins products in these categories are:
48035, 4 Flat Vehicle Side Towing Connector (48")
from $7.99
(5)
48035, 4 Flat Vehicle Side Towing Connector (48")
Trailer Wiring Kits

FAQs for 1982 Ford F-250 Pickup Towing Products

What are the most purchased Towing Products for the 1982 Ford F-250 Pickup?

Out of 17 Towing Products for the 1982 Ford F-250 Pickup, the most popular in our inventory are:
Trailer Hitch: 2" Receiver, 10,000 LB Capacity, Installs as low as 60 Mins
from $239.99
This product is not rated
Trailer Hitch: 2" Receiver, 10,000 LB Capacity, Installs as low as 60 Mins
Trailer Hitch-Class III/IV
Trailer Hitch: 2" Receiver, 6,000 LB Capacity, Installs as low as 60 Mins
from $189.99
This product is not rated
Trailer Hitch: 2" Receiver, 6,000 LB Capacity, Installs as low as 60 Mins
Trailer Hitch – Class II
Trailer Hitch: 2" Receiver, 6,000 LB Capacity, Installs as low as 60 Mins
from $199.99
This product is not rated
Trailer Hitch: 2" Receiver, 6,000 LB Capacity, Installs as low as 60 Mins
Trailer Hitch-Class III/IV