1982 Ford F-150 Pickup Performance Exhaust Products
More 1982 Ford F-150 Pickup Performance Exhaust Products
Find your specific 1982 Ford F-150 Pickup original or aftermarket Performance Exhaust Products below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1982 Ford F-150 Pickup Performance Exhaust Products
Flowmaster Inc. – 50 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Moderate Sound (Part No.842451)
from
$175.99
The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – 40 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.42543)
from
$99.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – Super 44 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.842548)
from
$126.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a rich powerful tone and are the most aggressive, highest performing street muffler we’ve ever built in a four inch case. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – 50 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Moderate Sound (Part No.842553)
from
$175.99
The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (Part No.842446)
from
$126.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a rich powerful tone and are the most aggressive, highest performing street muffler we’ve ever built in a four inch case. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Dynomax – Ultra Flo Muffler: Universal Fit, Stainless Steel, 16" L, 3" In, 3" Out, Round (Part No.17296)
from
$119.99
DynoMax Ultra Flo SS Polished performance mufflers are constructed of stainless steel for lifelong durability and completely polished for show-quality shine. The unrestricted, straight-through design is dyno proven to flow up to 2,000 SCFM and support up to 1,900 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone.
Product Features:
See More
Product Features:
- Stainless steel construction for lifelong protection
- Polished finish for a show quality shine
- Dyno proven to flow up to 2,000 SCFM and support up to 1,900 horsepower
- Straight through design ensures unrestricted exhaust flow and reduces back pressure
- CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
Flowmaster Inc. – Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (Part No.942446)
from
$113.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing four inch case street muffler we’ve ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – 40 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (Part No.8042441)
from
$123.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Dynomax – Super Turbo Muffler Universal Fit Aluminized Steel 13" L, 3" In, 2.5" Out, Oval (Part No.17674)
from
$89.99
DynoMax Super Turbo performance mufflers exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications. The large internal flow tubes improve exhaust flow and reduce backpressure. Each muffler uses fiberglass matting technology to absorb unwanted interior resonance while maintaining a mellow performance tone.
Product Features:
See More
Product Features:
- Large internal flow tubes improve exhaust flow and reduce backpressure
- Exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications.
- Fiberglass matting technology to absorb unwanted interior resonance while maintaining a mellow performance tone
- Dyno proven to flow up to 700 SCFM
Mr. Gasket – Exhaust Gasket Set (Part No.253)
from
$29.49
Manufactured from high-temperature composite exhaust material. Provides maximum torque retention to eliminate gasket failure. Can be trimmed if necessary for modified port applications. Precision die cut for an excellent fit. For OE replacement, high-performance street, drag race and oval track.
Product Features:
See More
Product Features:
- High-Temperature Exhaust Material
- Withstands Extreme Exhaust Heat
- Excellent Sealing Durability And Torque Retention
- Superior Tensile Strength
Hooker Headers – Super Competition Header Gasket (Part No.10820HKR)
from
$19.99
Hooker’s precision-matched Super Competition header gaskets provide a sure fit and unmatched exhaust sealing. This OEM quality gasket is constructed of a thick ,.060 inch, high temperature, non-asbestos fiber laminate with a perforated steel core, which provides a superior grip and adhesion. This construction also contributes to exact fit compliance between the cylinder head and header flange, offering excellent sealing properties during extreme temperature and operating conditions.
Product Features:
See More
Product Features:
- Tear Resistant
- Precisely Cut To Match Header
Edelbrock – Exhaust Manifold Gasket Set for Ford (Part No.7262)
from
$28.99
Product Features:
See More
- Designed To Match Port Openings Of Cylinder Heads
- Excellent Free-Flowing Seal
Mr. Gasket – Exhaust Gasket Set (Part No.264G)
from
$36.49
Mr. Gasket Performance exhaust gasket material is a heavy duty material, .062 inch thick, consisting of an acrylic binder system to resist high temperature. This material is made for sealing exhaust applications. Provides excellent sealing and durability.
Product Features:
See More
Product Features:
- Manufactured from high-temperature acrylic blend exhaust material
- Provides excellent sealing and durability
- Can be trimmed if necessary for modified port applications
- For OE replacement, high performance street, drag race and oval track use
- Precision Die Cut For Excellent Fit
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1416)
from
$39.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1430)
from
$26.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1468)
from
$45.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
Mr. Gasket – Aluminum Exhaust Gasket (Part No.7410G)
from
$42.99
Upgrade to Mr. Gasket Aluminum Layered Header Gaskets and eliminate blown exhaust gaskets forever. They conform to warped and damaged surfaces to create an airtight, leak-proof seal and will not shrink or deteriorate EVER.
Product Features:
See More
Product Features:
- Reusable header, exhaust manifold and collector flange gaskets
- Manufactured from “dead soft” aluminum layers – .125″ thick
- Conforms easily to surface irregularities (warped flanges)
- Compresses down to 0.060″ to create a tight leak-proof seal
- Will not shrink, deteriorate, or blow out- eliminating gasket leaks
- For high performance street, drag race and oval track use
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1467)
from
$45.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
Flowtech – Shorty; Smog Headers (Part No.91668FLT)
from
$454.99Product Features:
- Bolt On Quickly And Easily
- Top Performance/Clean Machine
- Increased Efficiency
- Leak Free Seal
- Connects To Exhaust Head Pipe
- Complete With Premium Gaskets
- 16-Gauge Tubing For Durability
Flowtech – Shorty; Smog Headers (Part No.91669-1FLT)
from
$738.99Product Features:
- Bolt On Quickly And Easily
- Top Performance/Clean Machine
- Increased Efficiency
- Leak Free Seal
- Connects To Exhaust Head Pipe
- Complete With Premium Gaskets
- 16-Gauge Tubing For Durability
Flowtech – Shorty; Smog Headers (Part No.91670FLT)
from
$395.99Product Features:
- Bolt On Quickly And Easily
- Top Performance/Clean Machine
- Increased Efficiency
- Leak Free Seal
- Connects To Exhaust Head Pipe
- Complete With Premium Gaskets
- 16-Gauge Tubing For Durability
Flowtech – Shorty; Smog Headers (Part No.91669FLT)
from
$478.99Product Features:
- Bolt On Quickly And Easily
- Top Performance/Clean Machine
- Increased Efficiency
- Leak Free Seal
- Connects To Exhaust Head Pipe
- Complete With Premium Gaskets
- 16-Gauge Tubing For Durability
Hooker Headers – Super Comp. Header (Part No.6823HKR)
from
$870.99
Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- Long Tube Lengths
- Long Transition Collectors
- Monstrous Low-Mid Range Torque
- Keep Top End Horsepower
- Provides Finest Fit
- Most Durable Design Available
Hooker Headers – Competition Header (Part No.6907HKR)
from
$339.99
LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- High Performance
- Affordable
- Durable 16 Gauge Material
- Welds Easier
- Lasts Longer
- Heat Cured
- High Heat Resistant
Flowtech – Standard Header (Part No.12504FLT)
from
$299.99Product Features:
- Fuel Economy From The Engine
- Leak Test For Max Performance
- Mandrel-Formed Power Plenum
- Leakproof O-Ringed Port Seals
- Include All Mounting Hardware
Flowtech – High-Performance Shorty Headers with Ceramic Coating (Part No.91627FLT)
from
$399.99Product Features:
- Bolt On Quickly And Easily
- Top Performance/Clean Machine
- Increased Efficiency
- Leak Free Seal
- Connects To Exhaust Head Pipe
- Complete With Premium Gaskets
- 16-Gauge Tubing For Durability
Popular 1982 Ford F-150 Pickup Performance Exhaust Products Categories
1982 Ford F-150 Pickup Performance Exhaust Products
Maybe you’re in the middle of a full rebuild of that 1982 Ford F-150 Pickup. Maybe you just need a couple of Performance Exhaust Products. Either way, Advance Auto Parts has 17 different Performance Exhaust Products in our inventory ranging from $19.99 to $870.99. That means you can find the exact parts or products you need to keep that 1982 Ford F-150 Pickup running smoothly.
Performance Exhaust Products are only as good as their brand. We stock 5 different brands to make sure you have plenty of trusted parts to choose from for your 1982 Ford F-150 Pickup. Mr. Gasket, Hooker Headers, and Flowmaster Inc. are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Performance Exhaust Products for your 1982 Ford F-150 Pickup, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 19 reviews in this category, some of the top rated parts include Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound with 4.7 stars and Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound with 5.0 stars.
So if you’re in the market for aftermarket Performance Exhaust Products to keep your 1982 Ford F-150 Pickup rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Performance Exhaust Products Brands To Make Your 1982 Ford F-150 Pickup Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1982 Ford F-150 Pickup demands trusted brand parts and products to keep it running. Many trusted brands of Performance Exhaust Products make up Advance Auto Parts’ inventory, and all are ready to help make your F-150 Pickup the best it can be. Be sure to browse some of our top Performance Exhaust Products brands and parts.
Popular Mr. Gasket Performance Exhaust Products
We carry Mr. Gasket parts in our stock across Performance Exhaust Manifold Gaskets categories, plus more. For a 1982 Ford F-150 Pickup, our most popular Mr. Gasket Performance Exhaust Products include:
Top 1982 Ford F-150 Pickup Performance Exhaust Products from Hooker Headers
Hooker Headers products are another trusted brand when it comes to Performance Exhaust Products for your 1982 Ford F-150 Pickup. Popular Hooker Headers parts include:
FAQs for 1982 Ford F-150 Pickup Performance Exhaust Products
What are the most purchased Performance Exhaust Products for the 1982 Ford F-150 Pickup?
Out of 17 Performance Exhaust Products for the 1982 Ford F-150 Pickup, the most popular in our inventory are:
from
$123.99
This product is not rated
40 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound
Performance Exhaust Mufflers
from
$60.29
This product is not rated
Copper Seal: Exhaust Gasket Set
Performance Exhaust Manifold Gaskets
What are the top-rated 1982 Ford F-150 Pickup Performance Exhaust Products?
Top-rated Performance Exhaust Products for your 1982 Ford F-150 Pickup based on customer reviews/ratings are:
from
$113.99
(3)
Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound
“Very good deep sound! I only have a 4 cylinder 2000 Mitsubishi eclipse but you couldn’t even tell. It sounds great!”
from
$126.99
(1)
Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound
“This was ordered for my PT Cruiser GT HO Turbo 2.4L and it is a great sound not too much but just right. Not a ricer sound that I did not want.”
