1981 Toyota Land Cruiser Drivetrains
More 1981 Toyota Land Cruiser Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1981 Toyota Land Cruiser, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1981 Toyota Land Cruiser Drivetrains
Yukon Gear – Bearing Install Kit For ’91 And Newer Toyota Landcruiser Differential (Part No.11091)
from
$436.99
Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.
Product Features:
See More
Product Features:
- Fits 1991 and up Toyota Landcruiser
- Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve, marking compound and brush.
Driveworks – Ball Bearing (Part No.S-207)
from
$19.49
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Yukon Gear – Toyota Landcruiser Pinion Nut, Coarse Spline (Part No.33158)
from
$15.99
Toyota Landcruiser pinion nut, coarse spline, LARGE. 22mm x 1.5mm.
Product Features:
See More
Product Features:
- Pinion nut
- Fits Toyota Landcruiser with 10 spline pinion
Milemarker – Hub Conversion Kit (Part No.95-29918)
Powertrax – Lock Right Locker (Part No.1630-LR)
from
$376.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles. Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction. Powertrax® = Extreme Traction Systems!
See More
Yukon Gear – Pinion Install Kit For Toyota Landcruiser Differential (Part No.13091)
from
$274.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses high quality bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits standard rotation Toyota Landcruiser
- Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)
from
$99.99
Redline Synthetic “Shock Proof” Oil. 3 Quarts.
Product Features:
See More
Product Features:
- Includes three quarts of Redline Shockproof oil
Yukon Gear – Grizzly Locker For Toyota Landcruiser, 30 Spline (Part No.28032)
from
$1099.99
The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker is a mechanical locking differential. It features a forged case and 8620 internals for maximum strength. It’s patented design reduces common locker failures. All units assembled in the USA! All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts.
Product Features:
See More
Product Features:
- Fits Toyota 9.5″ Landcruiser with 30 spline axles
- Patented internal design reduces common locker failures
- 8620 internals for added strength
- Assembled in the USA
Yukon Gear – Landcruiser Standard Open Cross Pin Shaft (Part No.33419)
Yukon Gear – High Performance Ring & Pinion Gear Set For Toyota Land Cruiser In A 4.56 Ratio (Part No.24550)
from
$429.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty. A yoke and ring gear bolt kit are required for this gear set.
Product Features:
See More
Product Features:
- Fits Toyota 9.5″ Landcruiser
- 9.50″ ring gear diameter
- 27 spline pinion
- 10 ring gear bolts
- 4.56 ratio
Yukon Gear – Toyota Landcruiser Ring Gear Nut For Ring Gear Bolt (Part No.33062)
from
$8.99
Toyota Landcruiser ring gear nut for ring gear bolt.
Product Features:
See More
Product Features:
- Ring gear nut
- Fits Toyota Landcruiser
Corteco – Axle Seal (Part No.K4021473844CFW)
from
$8.51
Axle Seal
Yukon Gear – The Carrier Bearing Puller (Part No.56072)
from
$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
Yukon Gear – 12 Hole Yoke For ’83 And Newer Toyota 8" And V6 With 27 Splines (Part No.41105)
from
$109.99
Yukon 12 hole yoke for ’83 and newer Toyota 8″ and V6 with 27 splines. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Toyota 8″ and V6
- 27 spline
- Round companion flange
Yukon Gear – The Carrier Bearing Puller (Part No.56034)
from
$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
- Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
Yukon Gear – Landcruiser Standard Open Pinion Gear Thrust Washer (Part No.33394)
MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.287)
from
$27.99
Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
- KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Yukon Gear – Ring Gear Bolt Kit For Toyota Landcruiser (Part No.12075)
from
$192.99
Ring gear bolt kit for Toyota Landcruiser.
Product Features:
See More
Product Features:
- Fits standard rotation Toyota Landcruiser
- Included are ring gear bolts and nuts
Yukon Gear – Small Hole Yoke For ’85 To ’98 Toyota Landcruiser, T4 Manual Transmission With 27 Spl Pinion (Part No.41111)
from
$94.99
Yukon small hole yoke for ’85 to ’98 Toyota Landcruiser and T4 manual transmission with 27 spline pinion. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits 1985-1998 Toyota Landcruiser
- 27 spline
Yukon Gear – Replacement Pinion Depth Shims For Dana 60, 61 & D70-U (Part No.55012)
USA Standard Gear – Spartan Locker For Toyota 95" Landcruiser With 30 Spline Axles, Includes Heavy-Duty Cross Pin Shaft (Part No.17033)
from
$603.99
The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.
Product Features:
See More
Product Features:
- Fits Toyota 9.5″ Landcruiser with 30 spline axles
- Made from 9310 steel for added strength
- Replaces the spiders in a standard carrier case
National – Bearings (Part No.201-CC)
from
$15.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Toyota Landcruiser Crush Sleeve (Part No.33114)
from
$34.99
Toyota Landcruiser crush sleeve. Approx 2.220″ long.
Product Features:
See More
Product Features:
- Crush sleeve
- Fits Toyota Landcruiser
- 2.220″ tall
USA Standard Gear – Master Overhaul Kit For ’90 & Old Toyota Landcruiser (Part No.37082)
from
$358.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.
Product Features:
See More
Product Features:
- Fits 1990 and down Toyota Landcruiser
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, pinion nut, crush sleeve, thread locker, marking compound with brush and silicone.
Driveworks – Differential Pinion Seal (Part No.S-710734)
Yukon Gear – Outer Oil Slinger (Part No.33025)
from
$10.99
Outer oil slinger for Toyota 7.5″, 8″, V6 & Landcruiser.
Product Features:
See More
Product Features:
- Outer oil slinger for Toyota 7.5″, 8″, V6 and Landcruiser
NOK – Axle Seal (Part No.K402148816NOK)
from
$7.22
NOK is Japan’s longest established oil seal manufacturer. Our functional parts such as oil seals and mechanical seals, created through advanced seal technology, are not only employed in the automotive industry but are also used in a wide range of other industries.
Product Features:
See More
Product Features:
- Machined rubber sealing edge provides greater accuracy and consistency, as well as a better sealing surface.
- The flanged design allows for easier and proper installation and helps avoid cocking.
- The latex bore coat seals the outer diameter leak path and helps compensate for minor bore imperfections.
- Extra dust lip helps keep harmful contaminants, such as dirt, out of the bearing and protects against rust and corrosion.
Yukon Gear – Bearing Race Driver (Part No.56005)
from
$126.99
Bearing race driver front Toyota 7.5″, 8″, Landcruiser, and the Suzuki Samurai. No return. (TOY30306).
Product Features:
See More
Product Features:
- Bearing race driver
- Fits 30306 race
- All steel construction
Popular 1981 Toyota Land Cruiser Drivetrains Categories
1981 Toyota Land Cruiser Drivetrains
You count on your 1981 Toyota Land Cruiser to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 58 Drivetrains ranging in price from $5.49 to $1,099.99, you’re sure to find everything you need for your 1981 Toyota Land Cruiser.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 11 different brands like Valvoline, National, and Yukon Gear. 1981 Toyota Land Cruiser Drivetrains start as low as $5.49!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 459 extensive product reviews on 1981 Toyota Land Cruiser Drivetrains. Some of the top-rated Drivetrains products we carry are Bearings with 2.5 stars and Bearings with 4.0 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1981 Toyota Land Cruiser below to get started!
Top-Rated Drivetrains Brands For Your 1981 Toyota Land Cruiser
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1981 Toyota Land Cruiser running right for years to come. In our inventory you’ll find brands like Valvoline, National, Yukon Gear, and even more.
Popular Valvoline Drivetrains
You’ll find popular Valvoline brand products across Differentials. All are waiting to get your 1981 Toyota Land Cruiser back on the road. Some of the top-rated Valvoline products in these categories are:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 1981 Toyota Land Cruiser Drivetrains
What are the most purchased Drivetrains for the 1981 Toyota Land Cruiser?
Out of 58 Drivetrains for the 1981 Toyota Land Cruiser, the most popular in our inventory are:
