from

$359.99

Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses premium bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, and marking compound with brush. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.

Product Features:

Fits 1990 and down Toyota Landcruiser
Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, pinion nut, crush sleeve , oil baffles and slingers , thread locker, marking compound with brush, and silicone.

from

$603.99

The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.

Product Features:

Fits Toyota 9.5″ Landcruiser with 30 spline axles
Made from 9310 steel for added strength
Replaces the spiders in a standard carrier case

from

$6.79

This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug & help ensure a secure seal.

Product Features:

Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles.
Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$1099.99

The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker is a mechanical locking differential. It features a forged case and 8620 internals for maximum strength. It’s patented design reduces common locker failures. All units assembled in the USA! All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts.

Product Features:

Fits Toyota 9.5″ Landcruiser with 30 spline axles
Patented internal design reduces common locker failures
8620 internals for added strength
Assembled in the USA

from

$32.99

Product Features:

Cross pin shaft
Fits Toyota Landcruiser

from

$99.99

Redline Synthetic “Shock Proof” Oil. 3 Quarts.

Product Features:

Includes three quarts of Redline Shockproof oil

from

$289.99

Product Features:

TOY 10BL 9.5″ LNDCRSR R/P MG 4:88 RATIO

from

$329.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

Fits reverse rotation Toyota Landcruiser
Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.

from

$103.99

Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush. No side shims.

Product Features:

Fits standard rotation Toyota Landcruiser
Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.

from

$31.99

Product Features:

Pinion gear thrust washer
Fits Toyota Landcrusier

from

$46.99

Product Features:

Outer slinger
Fits Toyota Landcruiser reverse rotation front

from

$28.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$17.99

Product Features:

Pinion depth shims for Dana Spicer 60 and 70U

from

$28.99

Landcruiser standard Open side gear Thrust washer.

Product Features:

Side gear thrust washer
Fits Toyota Landcrusier

from

$15.99

Toyota Landcruiser pinion nut, coarse spline, LARGE. 22mm x 1.5mm.

Product Features:

Pinion nut
Fits Toyota Landcruiser with 10 spline pinion

from

$28.99

Product Features:

Brand may vary by location

from

$192.99

Ring gear bolt kit for Toyota Landcruiser.

Product Features:

Fits standard rotation Toyota Landcruiser
Included are ring gear bolts and nuts

from

$6.99

Toyota 7.5″, 8″, & V6 ring gear bolt retainer plate (5 needed).

Product Features:

Ring gear bolt retainer plate for Toyota 7.5″ 8″ and 8″ V6
5 needed

from

$55.99

Yukon small hole yoke for ’82 and older Toyota 8″ and Landcruiser with 27 spline. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits 1982 and down Toyota Landcruiser
27 spline

from

$169.99

Yukon yoke for ’78 to ’84 Toyota Lancruiser with 27 spline pinion. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits 1978-1984 Toyota Landcruiser
27 spline

from

$21.99

Product Features:

KIT SHIM SIDE 9.5″ GM

from

$689.99

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings
Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications

from

$5.49

Product Features:

CRUSH SLEEVE 12 BLT CAR

from

$34.99

Toyota Landcruiser crush sleeve. Approx 2.220″ long.

Product Features:

Crush sleeve
Fits Toyota Landcruiser
2.220″ tall

from

$126.99

Bearing race driver front Toyota 7.5″, 8″, Landcruiser, and the Suzuki Samurai. No return. (TOY30306).

Product Features:

Bearing race driver
Fits 30306 race
All steel construction

from

$1566.99

21 Piece bearing race driver set. (Box wt: 140lbs) No return.

Product Features:

Bearing race driver set
21 pieces
All steel construction

from

$8.99

Toyota Landcruiser ring gear nut for ring gear bolt.

Product Features:

Ring gear nut
Fits Toyota Landcruiser

1981 Toyota Land Cruiser Differentials

More 1981 Toyota Land Cruiser Differentials

Essential 1981 Toyota Land Cruiser Differentials

Yukon Gear – Master Overhaul Kit For ’90 And Older Toyota Landcruiser Differential (Part No.14121)

USA Standard Gear – Spartan Locker For Toyota 95" Landcruiser With 30 Spline Axles, Includes Heavy-Duty Cross Pin Shaft (Part No.17033)

Needa Parts – Standard Engine Oil Drain Plug: 9/16-18 Thread, 0.75 " Head, 1 Pack (Part No.090-030)

Yukon Gear – Grizzly Locker For Toyota Landcruiser, 30 Spline (Part No.28032)

Yukon Gear – Landcruiser Standard Open Cross Pin Shaft (Part No.33419)

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

Motive Gear – Differential Ring and Pinion (Part No.T488L)

Yukon Gear – Pinion Install Kit For ’91-’97 Toyota Landcruiser Reverse Rotation Front (Part No.13104)

Yukon Gear – Minor Install Kit For Toyota Landcruiser Differential (Part No.12074)

Yukon Gear – Landcruiser Standard Open Pinion Gear Thrust Washer (Part No.33394)

Yukon Gear – Toyota Landcruiser Reverse Rotation Front Outer Oil Slinger (Part No.33028)

National – Multi Purpose Seal (Part No.710734)

Yukon Gear – Replacement Pinion Depth Shims For Dana 60, 61 & D70-U (Part No.55012)

Yukon Gear – Landcruiser Standard Open Side Gear Thrust Washer (Part No.33400)

Yukon Gear – Toyota Landcruiser Pinion Nut, Coarse Spline (Part No.33158)

Driveworks – Tapered Roller Bearing (Part No.S-32010X)

Yukon Gear – Ring Gear Bolt Kit For Toyota Landcruiser (Part No.12075)

Yukon Gear – Toyota 7.5", 8", & V6 Ring Gear Bolt Retainer Plate (Part No.33061)

Yukon Gear – Small Hole Yoke For ’82 And Older Toyota 8" And Landcruiser With 27 Spline (Part No.41102)

Yukon Gear – Yoke For ’78 To ’84 Toyota Lancruiser With 27 Spline Pinion (Part No.41110)

Motive Gear – Differential Carrier Shim Kit (Part No.GM9.5SSK)

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

Motive Gear – Differential Crush Sleeve (Part No.3954480)

Yukon Gear – Toyota Landcruiser Crush Sleeve (Part No.33114)

Yukon Gear – Bearing Race Driver (Part No.56005)

Yukon Gear – Bearing Race Driver Set, 21 Piece (Part No.56030)

Yukon Gear – Toyota Landcruiser Ring Gear Nut For Ring Gear Bolt (Part No.33062)

Popular 1981 Toyota Land Cruiser Differentials Categories

1981 Toyota Land Cruiser Differentials

Differentials Brands To Make Your 1981 Toyota Land Cruiser Last

FAQs for 1981 Toyota Land Cruiser Differentials

What are the most purchased Differentials for the 1981 Toyota Land Cruiser?

More Popular Parts for All Makes