1981 Pontiac Grand Prix Performance and Racing Products

Below you will find various in-demand Pontiac Performance and Racing Products, components and accessories for your 1981 Grand Prix. Advance Auto Parts has popular Grand Prix parts like Performance Ignition Products, Performance Distributors, Performance Exhaust Products and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Grand Prix model years including 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 and more. Select a category of 1981 Pontiac Grand Prix Performance and Racing Products below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1981 Pontiac Grand Prix Performance and Racing Products Categories

Performance Engine Coolant Thermostats

Performance Coils

Performance Exhaust Mufflers

Performance Shifters

Performance Valve Covers

Performance Water Outlets

Performance Radiator Caps

Performance Engine Cylinder Head Gaskets

Performance Engine Camshaft and Lifter Kits

Performance Distributor Rotors

Performance Differential Covers

Performance Distributor Components

Performance Engine Intake Manifold Gaskets

Performance Engine Valve Springs

Performance Flywheel and Flexplates

Performance Exhaust Manifold Gaskets

Performance Posi Units and Components

Performance Distributor Caps

Performance Engine Rocker Arms

Performance Engine Camshafts

Performance Ring and Pinions

Performance Ignition Parts

Performance Engine Valve Lifters

Performance Transmission Shift Kits

Performance Engine Push Rods

Performance Brake Hose Kits

Performance Engine Valve Spring Retainer

Performance Ignition Systems

Performance Engine Valve Stem Seal Sets

Fuel System Upgrade Kit

Performance Alternator or Generators

Performance Transmission Rebuild Kits

Essential Performance and Racing Products for 1981 Pontiac Grand Prixes

from

$124.99

MiniSpool

from

$173.99

As performance levels increase, an O.E. style flexplate just won’t cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flexplate designed for 1955-85 GM small block (internally balanced) V8 engines along with 4.3L V6 engines. Also fits 1990 and earlier GM big block (internally balanced) V8 engines with two piece rear main seal. Features include high tensile strength steel construction to resist elongation and cracking, dual bolt pattern 10.75 or 11.5 inch converter mounting locations, 168 tooth ring gear with double-sided welds for added strength and comes with SFI 29.1 safety certification insuring the ultimate in safety and performance. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M SFI approved flexplates are ideal for extreme duty race applications as well as street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953. Compatible with Powerglide, TH350, TH400 and TH700R4 automatic transmissions.

Product Features:

NHRA/IHRA Legal For All Classes
Includes SFI Certification Sticker
Ideal For Street Applications
To Extreme Duty Racing
To High RPM Use

from

$77.99

Mr. Gasket screw-in rocker arm studs are manufactured from heat treated black oxide coated Grade 8 steel. Ideal for high performance street applications. OE style press in rocker studs can actually pull out of the cylinder head when using high lift camshafts. Includes sixteen studs 3/8-24 x 1.47 inch long top x 7/16-14 bottom.

Product Features:

Black Oxide Coated Grade 8 Steel
Kit Contains 16 Studs
Easy To Install
Heat Treated Steel
Grade 8 Steel

from

$399.99

Product Features:

GM 10BL 8.5 R/P 4.56 FRT/REAR MGP

from

$53.99

Knowing your coolant temperature can help to prevent burn injuries. Thermocap Cap, with its built-in calibrated thermometer, indicates the coolant temperature. This is useful information prior to cap removal. Never attempt to remove Thermocap Cap when the coolant temperature is very hot. The escaping hot coolant and steam may burn you. Reclamation valve works great with your coolant recovery system. Your radiator can reclaim coolant from your overflow bottle. Wide 30 degree to 270 degree F temperature range. Calibrated in centigrade and Fahrenheit. Color-coded temperature ranges.

Product Features:

Indicates Coolant Temperature
Helps to Prevent Injuries from coolant or steam burns
Integrated Coolant Reclamation Valve
Improves Underhood Appearance
Fahrenheit and centigrade readings
Various valve pressures available

from

$65.99

Russell’s wide variety of lightweight aluminum adapter fittings allow for the connection of Russell hose ends to almost any component. Adapters are offered in standard thread, metric thread and pipe thread to fit most popular oil pumps, fuel pumps, fuel f

from

$26.99

Spectre’s Oldsmobile V8 water neck fits Oldsmobile 330, 350, 425 and 455 engines. This water neck has been designed around the OEM specifications and has a chrome plated finish for a lasting look that fits great. This water neck has an additional by-pass hose connection and includes the bolts.

Product Features:

Fits Oldsmobile 330, 350, 425 and 455 engines
Chrome plated
Bolts included
Designed for OEM fit
Easy to install
O-ring/gasket not included

from

$95.99

Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:

Service Part
No Moving Parts To Wear Out
Self Contained Unit
Can Drive OEM
Can Drive High Performance Ignition Coils

from

$88.99

Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Compatible with late model GM computer controlled remote mount HEI systems. Direct bolt-in, plug-in replacement. Brass coil wire contact increases energy transfer and resists corrosion better than aluminum. Complete with new mounting hardware.

Product Features:

10-15% More Energy
Direct Plug In Replacement Direct OE Fit
Advanced Bobbin Technology
Highly Specialized Silicone Magnetic Steel Cores
Standard Motor Products SMP DR-37
MSD 8226
Resist Corrosion
W/New Mounting Hardware

from

$165.99

Magnum Pushrods from COMP Cams offer an affordable solution for your .080″ wall chromemoly pushrod needs. Designed to withstand the stresses of a high performance engine, Magnum Pushrods are head-treated for extended durability and have precision formed, reinforced ends. Magnum Pushrods are black-oxide finished with their part number and length laser etched onto the surface for easy identification.

Product Features:

3/8″ Diameter, 7.800″ Length
Magnum Pushrods for Small Block Chevy
One-piece .080″ wall chromemoly steel tubing
Heat-treated for extended durability and guide plate compatibility
Precision formed and reinforced pushrod end

from

$230.99

COMP Cams offers a complete line of valve stem seals, from the umbrella seals to the positive-stop Teflon seal. These seals are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The umbrella seal is normally used when a larger-than-stock diameter spring is used, in the case of a double spring, the positive-stop Teflon seal is used. The umbrella seals require no machining, but with the Teflon seal it is necessary to disassemble the heads and machine the top of the guide with a special .530 diameter cutter. Whenever you are planning an engine overhaul or a cam change, don’t forget the valve seals.

Product Features:

Work with stock guides and 11/32″ valve stem diameter
Valve stem oil seals keep unwanted oil from entering the combustion chamber
Several different types of valve seals are offered

from

$449.99

Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts.

Product Features:

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$13.99

High Energy Hydraulic Flat Lifter Chevrolet SBC, BBC, and 194-292/200-262 V6.

from

$124.99

Chrome plated steel valve covers with original equipment height and internal baffle. Features one breather/oil fill cap opening per valve cover. Sold as a pair. Hardware and gaskets sold separately.

Product Features:

Chrome plated steel construction
Center bolt design with ribbed top
Has two openings in one cover & one opening in the other
Includes rubber grommets and chrome oil filler cap
Sold as a pair
Has Ribs On The Top Of Each One

from

$42.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$28.99

Flame Thrower Street/Strip distributors have a speciallFlame-Thrower Street/Strip distributors have a specially designed HEI distributor module and coil combination which operates without misfire beyond 7500 RPM. That’s nearly 3000 RPM higher than most stock HEI Distributors. Race HEI Distributors feature an electronic HEI Distributor module and 50,000 volt coil combination that optimizes spark energy and peak current to the spark plug in the 6000 to 8500 RPM range.y designed module and coil combination which operates without misfire beyond 7500 RPM

Product Features:

Precision machined chromoly weights and center plate.
Designed to eliminate erratic timing.
Includes three sets of springs.
Complete installation instructions make recurving your distributor easy.

from

$166.99

The B&M Transpak has all the features in the Shift Improver Kit, plus it provides additional driver manual control. Retain full automatic features and standard shift points with selector in Drive.

Product Features:

Recalibrate Auto. Transmission
Optimum Performance
Select Your App. Mode
Improves Transmission Life
Trans. Removal Not Required
Downshift At Any Speed
Great For Trailer Towing
For Heavy Loads Driving Downhill

from

$843.99

Product Features:

Prepares your 1978-1988 GM G-Body with a bullet proof fuel system for conversion to EFI
Pump gas and E85 compatible Fuel Plumbing Kit in a box, ready for whatever engine you throw at it
Uses a 5 micron GM Corvette-style filter/regulator which presets the fuel pressure to a fixed 58 psi
Contains a wide variety parts and accessories going up to the engine for a complete fuel system kit
Includes 20ft of 6AN nylon braided hose, enough to go from the tank to the fuel rails
Simplifies your fuel system with direct replacement components while still maintaining an OEM-like appearance
Takes the guesswork out of piecing together fuel fittings and hose, while also upgrading the factory fuel system
Utilizes as many of the original sheet metal and chassis fuel system routing provisions with minimal to no drilling required
Electric Fuel Pump Harness & Relay Wiring Kit, ensures the fuel pump receives the proper amperage, for improved reliability and consistent performance
Pre-calibrated fuel level sending unit works with factory fuel gauge, for a simplistic installation, no guessing what ohm range your gauge or sending unit is
Highly detailed installation instructions to guide you, step by step, along the installation process

from

$54.99

The cap of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap. To make things easy, we now offer these caps as replacement kits.

Product Features:

Stock GM HEI replacement distributor cap
Red

from

$32.49

Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:

Opens At 195 Degrees
Designed to Resist Large Variations of Coolant Pressure at High RPM
Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
For High Performance Street, Drag Race, and Oval Track
Copper & Brass Construction – Resists Corrosion
High Flow

from

$76.99

The Mr. Gasket chrome plated rear end cover is made from heavy-gauge steel and comes complete with bolts and gaskets.

Product Features:

Chrome plated steel for looks
Includes bolts and gasket

from

$323.99

For a long time, racers have known that one of the best things to do to an engine to improve its performance is to stabilize the ignition timing. The MSD flying magnet crank trigger system does exactly that by using magnets embedded in an aluminum wheel. The MSD flying magnet crank trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This flying magnet design produces accurate trigger signals and the non-magnetic pick-up cannot be false triggered. Each flying magnet crank trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver’s side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The adjustable bracket provides a wide range of timing adjustment and spacers are included. These systems will trigger MSD 6, 7, 8 and 10 series ignitions and all MSD timing accessories.

Product Features:

Replacement crank trigger wheel for small block Chevy
Absolutely the most accurate way to trigger the ignition
The non-magnetic pickup cannot be false triggered
Powerful magnets are embedded in a billet aluminum trigger wheel

from

$173.99

The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$539.99

The Classic BAndM Megashifter features a Ratcheting action, ensuring positive shifts. Chrome Knob, Neutral safety switch And NHRA/IHRA Approved reverse lockout. Fits Most 3 And 4 speeds.

Product Features:

Universal Floor Mount
Base Can Be Trimmed-Custom Fit
Cable Operated
Quick Installation
Accurate Shifting

from

$32.49

Mr. Gasket Performance exhaust gasket material is a heavy duty material, .062 inch thick, consisting of an acrylic binder system to resist high temperature. This material is made for sealing exhaust applications. Provides excellent sealing and durability.

Product Features:

Manufactured from high-temperature acrylic blend exhaust material
Provides excellent sealing and durability
Can be trimmed if necessary for modified port applications
For OE replacement, high performance street, drag race and oval track use
Resists Deteriorating
Provides Excellent Torque Retention

from

$541.99

HYDRAULIC ROLLER – XFI XE-R: Xtreme Energy XE-R design for standard displacement LS6 and LS1. Race only applications. Custom tuning required.

Product Features:

HYDRAULIC ROLLER – XFI XE-R: Xtreme Energy XE-R design for standard displacement LS6 and LS1. Race only applications. Custom tuning required.
281/283 Advertised Duration, 232/234 Duration @ .050″, .595″/.598″ Lift, 112 Lobe Separation
Use Dual Valve Spring part No. 26925-16 with this camshaft

from

$32.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$17.49

ACCEL Hi-Performance rotors offer superior protection from arc-thru and crossfire. Features hi-performance 60,000 volt alkyd compound, stress-relieved at molding to ensure stability and resist centrifugal forces at high racing RPMs.

Product Features:

Max stability for all RPM ranges
Heavy duty for maximum energy transfer

Upgrade your 1981 Pontiac Grand Prix with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 1981 Pontiac Grand Prix, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Pontiac or enhancing its overall performance, Performance and Racing Products are key to keeping your Grand Prix functioning at its best. At Advance Auto Parts, we offer a wide selection of 91 Performance and Racing Products for the 1981 Pontiac Grand Prix, designed to meet your needs without breaking the bank. From Performance Ignition Product replacements to Performance Distributors upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1981 Pontiac Grand Prix at great prices. Our Performance and Racing Products inventory for this model ranges from just $9.99 to $869.99, with an average price of $272.04. Our 91 Performance and Racing Products in stock come from 16 trusted brands, so you’re sure to find the right part for your 1981 Pontiac Grand Prix without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1981 Pontiac Grand Prix, we stock popular OEM and aftermarket Performance and Racing Products from top names like PerTronix, B & M, Accel, and more. PerTronix Performance and Racing Products start at just $28.99 and boast an impressive 4.4 stars average rating from customers. B & M and Accel also bring quality to the table, with Performance and Racing Products available starting at $102.99, and at an average 4.1 stars rating. With 378 customer reviews and counting, our 1981 Pontiac Grand Prix Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1981 Pontiac Grand Prix is always ready to roll. We’re committed to providing you with everything you need to keep your Grand Prix in top shape, all in one place. Start shopping confidently below for your 1981 Pontiac Grand Prix!

Best-Selling Performance Ignition Products for 1981 Pontiac Grand Prixes

Enhance the driving experience in your Pontiac with 7 quality Performance Ignition Product components, starting at $34.49.

show more show less

from

$102.99

Engineered for higher energy output resulting in quicker starting, improved idle quality, crisper throttle response and more high RPM power. Compatible with both original HEI ignition systems and later model computer controlled HEI systems. No need to remove or re-time distributor. Complete with simplified ground strap, mounting screws, silicone coil gasket and carbon contact brush / spring.

Product Features:

10-15% More Energy
Direct Plug In Replacement Direct OE Fit
Advanced Bobbin Technology
Highly Specialized Silicone Magnetic Steel Cores
Standard Motor Products SMP Dr-31
MSD 8225

from

$95.99

Service Part
No Moving Parts To Wear Out
Self Contained Unit
Can Drive OEM
Can Drive High Performance Ignition Coils

from

$126.99

10-15% More Energy
Direct Plug In Replacement Direct OE Fit
Advanced Bobbin Technology
Highly Specialized Silicone Magnetic Steel Cores
Similar to Standard Motor Products SMP Dr-32
Long Life And Great Looks

from

$34.49

Product Features:

Service Part
Makes Connections Quick And Easy

from

$323.99

Replacement crank trigger wheel for small block Chevy
Absolutely the most accurate way to trigger the ignition
The non-magnetic pickup cannot be false triggered
Powerful magnets are embedded in a billet aluminum trigger wheel

from

$204.99

Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

Product Features:

Glass Filled Polyester Case
Longer Spark Duration
Increased Performance
No Energy Loss Due To Arcing
Includes Brass Contact Terminal

from

$70.99

Stock style replacement modified HEI coil dust cover. Used on 8 cylinder vehicles only.

Product Features:

Externally mounted coil
Increases reliability
Increase performance
High quality plastic
Resist spark loss
Use brass conductors
Low resistance connections
No modifications

Most Popular 1981 Pontiac Grand Prix Performance Distributors

Customize your Pontiac with 7 Performance Distributors products like Performance Distributor Rotors, Performance Distributor Components, and Performance Distributor Caps, all priced under $54.99.

show more show less

from

$28.99

Precision machined chromoly weights and center plate.
Designed to eliminate erratic timing.
Includes three sets of springs.
Complete installation instructions make recurving your distributor easy.

from

$54.99

Stock GM HEI replacement distributor cap
Red

from

$33.99

Premium quality wire harness and capacitor.
Insure good connection and “static free” operation.

from

$17.99

Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

Product Features:

Made from hi-performance 60 KV rated alkyd molding compound.
Cap and rotor kits include nylon rotor hold-down screws.
Flame-Thrower dust covers provide a larger air gap around the coil.

from

$17.49

Max stability for all RPM ranges
Heavy duty for maximum energy transfer

from

$17.99

Made from hi-performance 60 KV rated alkyd molding compound.
Cap and rotor kits include nylon rotor hold-down screws.
Flame-Thrower dust covers provide a larger air gap around the coil.

from

$11.99

Made from hi-performance 60 KV rated alkyd molding compound.
Cap and rotor kits include nylon rotor hold-down screws.
Flame-Thrower dust covers provide a larger air gap around the coil.

Top Picks for 1981 Pontiac Grand Prix Performance Exhaust Products

Upgrade Pontiac Grand Prixes with top-quality Performance Exhaust Products parts, including 5 OEM and aftermarket selections for your 1981 model.

show more show less

from

$139.99

Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a rich powerful tone and are the most aggressive, highest performing street muffler we’ve ever built in a four inch case. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

from

$135.99

The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

Flowmaster Super 40 Series Chambered Muffler

from

$189.99

Developed from our Top Ten race muffler lineup for use on the street/strip, the Super 40® features Flowmaster’s Delta Flow® technology. It’s larger case profile provides the best of both worlds of performance and sound, especially on forced induction and high horsepower vehicles. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow® technology. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

Product Features:

Excellent performance on high horsepower vehicles
Noticeable interior resonance
Deep Aggressive Sound Exhaust Note
Durable fully welded 409SS stainless steel

from

$152.99

The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$34.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
Slotted bolt holes allow for easier header installation.
Not intended for use in emission controlled vehicles.

In-Demand Performance Fuel Systems for 1981 Pontiac Grand Prixes

Select from 1 premium Performance Fuel Systems parts for your 1981 Pontiac Grand Prix.

show more show less

from

$843.99

Product Features:

Prepares your 1978-1988 GM G-Body with a bullet proof fuel system for conversion to EFI
Pump gas and E85 compatible Fuel Plumbing Kit in a box, ready for whatever engine you throw at it
Uses a 5 micron GM Corvette-style filter/regulator which presets the fuel pressure to a fixed 58 psi
Contains a wide variety parts and accessories going up to the engine for a complete fuel system kit
Includes 20ft of 6AN nylon braided hose, enough to go from the tank to the fuel rails
Simplifies your fuel system with direct replacement components while still maintaining an OEM-like appearance
Takes the guesswork out of piecing together fuel fittings and hose, while also upgrading the factory fuel system
Utilizes as many of the original sheet metal and chassis fuel system routing provisions with minimal to no drilling required
Electric Fuel Pump Harness & Relay Wiring Kit, ensures the fuel pump receives the proper amperage, for improved reliability and consistent performance
Pre-calibrated fuel level sending unit works with factory fuel gauge, for a simplistic installation, no guessing what ohm range your gauge or sending unit is
Highly detailed installation instructions to guide you, step by step, along the installation process

Most Sold 1981 Pontiac Grand Prix Performance Engines

Explore our best-selling Pontiac parts for the 1981 Grand Prix among 32 OEM and aftermarket options starting from $9.99.

show more show less

from

$32.49

Opens At 195 Degrees
Designed to Resist Large Variations of Coolant Pressure at High RPM
Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
For High Performance Street, Drag Race, and Oval Track
Copper & Brass Construction – Resists Corrosion
High Flow

from

$26.99

Fits Oldsmobile 330, 350, 425 and 455 engines
Chrome plated
Bolts included
Designed for OEM fit
Easy to install
O-ring/gasket not included

from

$223.99

Work with .530″ guides and 11/32″ valve stem diameter
Valve stem oil seals keep unwanted oil from entering the combustion chamber
Several different types of valve seals are offered

from

$32.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$61.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions.

Product Features:

Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
Raises combustion sealing force to roughly three times that of standard head gaskets.
Steel wire rings for the greatest combustion seal strength.
Not intended for use in emission controlled vehicles.

High Energy 218/212 Hydraulic Roller Cam for Buick Grand National 231 V6

from

$815.99

High Energy 218/212 Hydraulic Roller Cam for Buick Grand National 231 V6

High Energy 212/212 Hydraulic Roller Cam for Buick Grand National 231 V6

from

$815.99

High Energy 212/212 Hydraulic Roller Cam for Buick Grand National 231 V6

High Energy 206/206 Hydraulic Roller Cam for Buick Grand National 231 V6

from

$815.99

High Energy 206/206 Hydraulic Roller Cam for Buick Grand National 231 V6

from

$519.99

ENGINE ROCKER ARM

from

$519.99

ENGINE ROCKER ARM

High Energy 218/218 Hydraulic Flat Cam for Buick 181-252 Even Fire V6

from

$479.99

High Energy 218/218 Hydraulic Flat Cam for Buick 181-252 Even Fire V6

from

$429.99

Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.

Product Features:

Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
Best with aftermarket converters and more rear gear.
Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.

High Energy 212/212 Hydraulic Flat Ca, for Buick Grand National 231 V6

from

$428.99

High Energy 212/212 Hydraulic Flat Ca, for Buick Grand National 231 V6

from

$401.99

16 Springs

7 Degree Steel Retainer Set of 16 for 11/32" Valves with 1.500"-1.550" Spring

from

$80.99

7 Degree Steel Retainer Set of 16 for 11/32" Valves with 1.500"-1.550" Spring

7 Degree Steel Retainer Set of 16 for 3/8" Valves with 1.500"-1.550" Spring

from

$80.99

7 Degree Steel Retainer Set of 16 for 3/8" Valves with 1.500"-1.550" Spring

from

$74.99

Engine Valve Spring Kit

from

$57.99

Engine Valve Spring Kit

from

$51.99

ENGINE ROCKER ARM

from

$50.99

ENGINE ROCKER ARM

from

$50.99

ENGINE ROCKER ARM

from

$46.99

1 Spring

High Energy 9.146" Long, 5/16" Diameter Pushrod Set

from

$43.99

High Energy 9.146" Long, 5/16" Diameter Pushrod Set

High Energy 8.684" Long, 5/16" Diameter Pushrod Set of 12

from

$31.99

High Energy 8.684" Long, 5/16" Diameter Pushrod Set of 12

Top-Rated Performance and Racing Products Brands For Your 1981 Pontiac Grand Prix

Shop for the best-rated brands offering Performance and Racing Products and other products for your 1981 Pontiac Grand Prixes. Below you’ll find some of our best rated Performance and Racing Products from PerTronix, B & M, and Accel, and more. Performance and Racing Products from these brands that fit a 1981 Grand Prix start at just $28.99 and are rated as high as 4.4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular PerTronix 1981 Pontiac Grand Prix Performance and Racing Products

When it comes to maintaining or upgrading your 1981 Pontiac Grand Prix, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. PerTronix ticks all of those boxes. We offer a wide selection of PerTronix Performance and Racing Products, specifically designed for the 1981 Pontiac Grand Prix. With over 2 PerTronix brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $28.99, with an average price of just $31.49. Plus, with over 2 customer reviews and an average rating of 4.4 stars, you can trust that our PerTronix Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $33.99

(1)

D9007 Flame-Thrower HEI Distributor 4-Pin Wire Harness/Capacitor

“Works well, good quality harness!”

from $28.99

(1)

D9001 Flame-Thrower Hei Distributor Advance Curve Kit

“This is a good product for a reasonable price”

Popular B & M 1981 Pontiac Grand Prix Performance and Racing Products

B & M auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1981 Pontiac Grand Prix owner should feel confident when installing genuine B & M parts in their vehicle. To ensure the best fit and performance for your 1981 Grand Prix, Advance Auto Parts carries a full inventory of 3 B & M Performance and Racing Products. Plus you will be keeping your Pontiac in peak condition while saving money because prices on these B & M Performance and Racing Products range from $349.99 to $539.99, plus, with more than 3 customer reviews and an impressive 4.1 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

from $349.99

(1)

Automatic Shifter, StarShifter

“while I was looking this shifter over and found it wouldn’t work for my application, I found it to be as beautiful as the B&M shifter I had in my othe”

from $539.99

(1)

Automatic Shifter – Megashifter – Universal

“its was pretty easy to install if u have any type of knowlegde of cars it should not be difficult at all and the shifting is awesome just be careful w”

from $371.99

(1)

Automatic Shifter, Sport Shifter

“This is a sweetly made product with that hotrod look and feel.This shifter was easy to install and a knock out to drive.No down falls as far as I’m aw”

FAQs for 1981 Pontiac Grand Prix Performance and Racing Products

Which Performance and Racing Products are best-sellers for 1981 Pontiac Grand Prixes?

Out of 91 Performance and Racing Products that fit 1981 Pontiac Grand Prixes, the following parts are the top sellers:

High Performance Thermostat (22903641) – $32.49
High Energy Ignition Coil for GM HEI – 1973-1991 (6900054) – $102.99
Water Neck; Olds (22905408) – $26.99

What’s the price range for 1981 Pontiac Grand Prix Performance and Racing Products?

Performance and Racing Product prices for the 1981 Pontiac Grand Prix start at $9.99 and go up to $869.99 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 1981 Pontiac Grand Prix?

The average price for Performance and Racing Products for the 1981 Pontiac Grand Prix is $272.04. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other Pontiac Grand Prix model years?

Yes, we currently carry Performance and Racing Products for 45 model years of Pontiac Grand Prixes between 1962 and 2008. Performance and Racing Products are bought most frequently for the following model years: 2008, 2007, 2006, 2005, 2004, 2003, 2002, 2001, and 2000.

What are the cheapest Performance and Racing Products for my 1981 Pontiac Grand Prix?

The cheapest 1981 Pontiac Grand Prix Performance and Racing Products we carry in stock are:

Engine Valve Spring (50286657) – $9.99
10 Degree Steel Retainer for 26120 Beehive Spring (50289146) – $10.99
7 Degree Steel Retainer for 3/8" Valves with 1.500"-1.550" Spring (50289506) – $10.99
7 Degree Steel Retainer for 11/32" Valves with 1.500"-1.550" Spring (50289132) – $10.99
D4260 Flame-Thrower Distributor Rotor HEI/EST Black (10111551) – $11.99

What are the top-rated Performance and Racing Products that fit the 1981 Pontiac Grand Prix?

Out of 378 reviews by customers, our 1981 Pontiac Grand Prix Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1981 Pontiac Grand Prix and their top-rated products:

Performance Radiators
- Thermocap Radiator Cap (6900022) – $53.99
Performance Shifters
- Thermocap Radiator Cap (6900022) – $53.99

What types of Performance and Racing Products do you sell for my 1981 Pontiac Grand Prix?

As of 3/1/26, these are some of the most in-demand types of Performance and Racing Products for a 1981 Pontiac Grand Prix:

Can I get help with 1981 Pontiac Grand Prix Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Pontiac Performance and Racing Products and more.

What is your return policy for Pontiac Grand Prix Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new Pontiac Grand Prix Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1981 Pontiac Grand Prix Performance and Racing Products

Richmond Gear – MiniSpool (Part No.78-7526-1)

B & M – Flexplate, SFI 29.1 Approved, Fits 168-Tooth, 2-Piece Rear Main Seal, Chevy V8 (Part No.20230)

Mr. Gasket – Ultra Seal: Screw-In Rocker Arm Studs (Part No.1076)

Motive Gear – Performance Differential Ring and Pinion (Part No.G885456)

Mr. Gasket – Thermocap Radiator Cap (Part No.2471S)

Russell – Street Legal, Monte Carlo (Part No.692100)

Spectre – Water Neck; Olds (Part No.4733)

Mallory – Unilite Ignition Module (Part No.605)

Accel – GM 1984-95 Remote Supercoil (Part No.140011)

Competition Cams – PUSHROD SET, SBC 3/8 1 ST (Part No.7513-16)

Competition Cams – Valve Seals, Umbrella 11/32" 1 St (Part No.502-16)

Competition Cams – Xtreme Energy 230/236 Hydraulic Flat Cam and Lifter Kit (Part No.CL42-224-4)

Competition Cams – High Energy Hydraulic Flat Lifter Chevrolet SBC, BBC, and 194-292/200-262 V6. (Part No.812-1)

Mr. Gasket – Valve Cover (Part No.9415)

FEL-PRO Performance – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.1003)

PerTronix – D9001 Flame-Thrower Hei Distributor Advance Curve Kit (Part No.D9001)

B & M – Transpak For 65-87 TH400 Transmission (Part No.20228)

Holley – G-Body Returnless Fuel System Kit (Part No.526-23)

MSD Ignition – Distributor Cap; GM HEI; Red (Part No.8411)

Mr. Gasket – High Performance Thermostat (Part No.4365)

Mr. Gasket – Differential Cover Kit (Part No.9896)

MSD Ignition – Trigger Wheel; Flying Magnet; Small Block Chevy (Part No.8611)

Flowmaster Inc. – 50 Series Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Moderate Sound (Part No.942551)

B & M – Automatic Shifter – Megashifter – Universal (Part No.80690)

Mr. Gasket – Exhaust Gasket: High-Temperature Protection, Durability, and Reliable Sealing (Part No.150A)

Competition Cams – XFI XE-R 232/234 Hydraulic Roller Cam (Part No.54-446-11)

FEL-PRO Performance – Lower Intake Manifold Gasket Set: 3 Piece Set (Part No.1200)

Accel – Ignition/Electrical (Part No.130120)

Accel – High Energy Ignition Coil for GM HEI – 1973-1991 (Part No.140003)

Mallory – Unilite Ignition Module (Part No.605)

Accel – GM Hei Supercoil Red/White (Part No.140005)

Mallory – Distributor Wiring Harness (Part No.29349)

MSD Ignition – Trigger Wheel; Flying Magnet; Small Block Chevy (Part No.8611)

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

MSD Ignition – Mod HEI Dust Cover, V8 & Odd Fire V6 (Part No.8401)

PerTronix – D9001 Flame-Thrower Hei Distributor Advance Curve Kit (Part No.D9001)

MSD Ignition – Distributor Cap; GM HEI; Red (Part No.8411)

PerTronix – D9007 Flame-Thrower HEI Distributor 4-Pin Wire Harness/Capacitor (Part No.D9007)

PerTronix – D4061 Flame-Thrower HEI Distributor Rotor Red (Part No.D4061)

Accel – Ignition/Electrical (Part No.130120)

PerTronix – D4062 Flame-Thrower HEI Distributor Rotor Blue (Part No.D4062)

PerTronix – D4260 Flame-Thrower Distributor Rotor HEI/EST Black (Part No.D4260)

Flowmaster Inc. – Super 44 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.842548)

Flowmaster Inc. – 40 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.8042543)

Flowmaster Inc. – Flowmaster Super 40 Series Chambered Muffler (Part No.852548)

Flowmaster Inc. – Super 40 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.952548)

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1400)

Holley – G-Body Returnless Fuel System Kit (Part No.526-23)

Mr. Gasket – High Performance Thermostat (Part No.4365)

Spectre – Water Neck; Olds (Part No.4733)

Competition Cams – VALVE SEALS, 11/32" TEFLON 1 ST (Part No.503-16)

FEL-PRO Performance – Lower Intake Manifold Gasket Set: 3 Piece Set (Part No.1200)

FEL-PRO Performance – Performance Cylinder Head Gasket (Part No.1000)

Competition Cams – High Energy 218/212 Hydraulic Roller Cam for Buick Grand National 231 V6 (Part No.69-400-8)

Competition Cams – High Energy 212/212 Hydraulic Roller Cam for Buick Grand National 231 V6 (Part No.69-300-8)

Competition Cams – High Energy 206/206 Hydraulic Roller Cam for Buick Grand National 231 V6 (Part No.69-200-8)

Competition Cams – ENGINE ROCKER ARM (Part No.1602-16)

Competition Cams – ENGINE ROCKER ARM (Part No.1601-16)

Competition Cams – High Energy 218/218 Hydraulic Flat Cam for Buick 181-252 Even Fire V6 (Part No.69-246-4)

Competition Cams – Thumpr 227/241 Hydraulic Flat Cam and Lifter Kit (Part No.CL51-600-5)

Competition Cams – High Energy 212/212 Hydraulic Flat Ca, for Buick Grand National 231 V6 (Part No.69-248-4)

Competition Cams – 16 Springs (Part No.26995-16)

Competition Cams – 7 Degree Steel Retainer Set of 16 for 11/32" Valves with 1.500"-1.550" Spring (Part No.782-16)

Competition Cams – 7 Degree Steel Retainer Set of 16 for 3/8" Valves with 1.500"-1.550" Spring (Part No.780-16)

Competition Cams – Engine Valve Spring Kit (Part No.980-16)

Competition Cams – Engine Valve Spring Kit (Part No.980-12)

Competition Cams – ENGINE ROCKER ARM (Part No.1605-1)

Competition Cams – ENGINE ROCKER ARM (Part No.1601-1)

Competition Cams – ENGINE ROCKER ARM (Part No.1602-1)

Competition Cams – 1 Spring (Part No.947-1)

Competition Cams – High Energy 9.146" Long, 5/16" Diameter Pushrod Set (Part No.7851-16)

Competition Cams – High Energy 8.684" Long, 5/16" Diameter Pushrod Set of 12 (Part No.7869-12)