1981 Oldsmobile 98 Performance Ignition Products

Essential 1981 Oldsmobile 98 Performance Ignition Products

Accel – Spark Plug Wire (Part No.8847)

Spark Plug Wire

from

$119.99
Spark Plug Wire

Accel – 300+Race, Spark Plug Wire Set, 8.8mm (Part No.7047)

300+Race, Spark Plug Wire Set, 8.8mm

from

$141.99
These ACCEL wire sets are custom tailored for race engines and their builders. The oversize 8.8 mm wire is rated for 600 degrees Fahrenheit and 60kV. Resists heat, chemicals and moisture. High density insulation eliminates arcing. Route over and under headers.

Product Features:
  • 150 Ohms Per Foot
  • 8.8mm Oversize Silicone Jacket
See More

MSD Ignition – Wire Set; Street Fire; Multi-Angle plug; HEI; Universal (Part No.5550)

Wire Set; Street Fire; Multi-Angle plug; HEI; Universal

from

$67.99
The street fire spark plug wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.

Product Features:
  • Helically wound conductor suppresses electro and radio noise
  • Kevlar core combination for great strength and durability
  • Heavy Duty Terminals For Secure Connection
  • 8mm silicone and synthetic jacket resists heat and abrasion
  • 500 Ohms/ft. Resistance For Improved Spark Delivery And Power
  • Silicone Boots Protect Against High Exhaust Temps
See More

Mallory – Unilite Breakerless Ignition Conversion Kit (Part No.501)

Unilite Breakerless Ignition Conversion Kit

from

$113.99
Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.

Product Features:
  • Easy Installation
  • Improved Fuel Economy
  • Reduced Maintenance
  • Accurate Timing
  • Improved Performance
  • Provides A Simple Conversion
  • No Moving Parts To Wear Out
See More

Mallory – Distributor Wiring Harness (Part No.29349)

Distributor Wiring Harness

from

$25.99


Product Features:
  • Service Part
  • Makes Connections Quick And Easy
See More

MSD Ignition – Coil; Blaster 2; High Performance (Part No.8202)

Coil; Blaster 2; High Performance

from

$71.99
If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.

Product Features:
  • Improved output coil for electronic ignitions
  • Works w/Blaster Ignition Or MSD 5/6/7 Series
  • Ballast Resistor Required If Used w/Stock Points Ignition
  • Alkyd tower w/high dielectric properties lessens carbon tracking
See More

Hypertech – Power Coil Kit for GM HEI Systems with Clamp Down Cap (Part No.4050)

Power Coil Kit for GM HEI Systems with Clamp Down Cap

from

$95.99
Hypertech’s Power Coil is capable of firing a street or slightly modified engine up to 7000 RPMs. Voltage gain over stock can exceed up to 57% more output depending on application. Stock coils usually average around 36,000 volts as compared to Hypertech’s coil kits that average between 45,000 and 55,000. Our coil kits include coil, brass terminals, cap, and rotor. Nylon rotor hold-down screws are included to prevent misfire, and our caps are made of high dielectric material to prevent carbon tracking. Each cap fits the distributor housing tightly to eliminate leakage. Power Coil/Caps/Rotors are NOT legal for sale/use in CA.

Product Features:
  • High Output Voltage
  • More Spark Energy
  • Up To 7000 RPMs
  • No Drop Off In Power As RPMs Increase
  • Wider Plug Gaps; Brass Terminals
  • Constructed w/Burn Through Resistant Materials
  • Excellent Dielectric Strength
  • Resists Carbon Tracking
  • Product might not be available in all states due to local laws.
See More

Accel – Super Coil Ignition Coil (Part No.140001)

Super Coil Ignition Coil

from

$98.99
These coils feature advanced bobbin technology, highly specialized silicone magnetic steel cores, along with optimized winding, resistance and turns ratios to delivery 10-15 percent more energy than the OEM coils. Specialized high temperature epoxy resist

Product Features:
  • Oil Filled For Better Cooling
  • Optimized Low Resistance
  • Silicon Magnetic Steel E-Core
  • Higher Energy/Voltage Outputs
  • Quicker Starts
  • Improved Idle Quality
  • Resists Shock And Vibration
  • Resists Corrosion
See More

Accel – Super DIS Coil (Part No.140017)

Super DIS Coil

from

$61.99
ACCEL offers the only true high-performance. AC Delco style DIS coil. Advanced bobbin technology, specialized magnetic steel core and optimum windings result in higher energy and voltage outputs plus arc duration. Direct bolt and plug in installation.

Product Features:
  • 10-15% More Energy
  • Direct Plug In Replacement Direct OE Fit
  • Advanced Bobbin Technology
  • Highly Specialized Silicone Magnetic Steel Cores
  • Standard Motor Products SMP Dr-39
  • MSD 8224
See More

Accel – Super Coil (Part No.140005)

Super Coil

from

$95.99
These coils feature advanced bobbin technology, highly specialized silicone magnetic steel cores, along with optimized winding, resistance and turns ratios to delivery 10-15 percent more energy than the OEM coils. Specialized high temperature epoxy resists shock and vibration, while increasing thermal conductivity. These are direct plug replacements for OEM coils. They feature bodies and, or secondary towers molded in ACCEL yellow and feature brass secondary contacts (except direct fire coil on plug applications).

Product Features:
  • 10-15% More Energy
  • Direct Plug In Replacement Direct OE Fit
  • Advanced Bobbin Technology
  • Highly Specialized Silicone Magnetic Steel Cores
  • Standard Motor Products SMP Dr-32
See More

Accel – Super Stock Coil (Part No.8140)

Super Stock Coil

from

$40.99
ACCEL’s super stock is the high-performance replacement for OE canister style coils. Improves starting, idle, throttle response and top RPM power. Works with OE ignitions and computers. Alkyd tower prevents flash over. Uses OE leads. Comes in chrome.

Product Features:
  • 42000 Volts
  • Effective To 6500 RPM
  • Quicker Starting
  • Improved Throttle Response
  • Higher RPM Power
  • Can Finished In Yellow
See More

1981 Oldsmobile 98 Performance Ignition Products

Maybe you’re in the middle of a full rebuild of that 1981 Oldsmobile 98. Maybe you just need a couple of Performance Ignition Products. Either way, Advance Auto Parts has 4 different Performance Ignition Products in our inventory ranging from $25.99 to $95.99. That means you can find the exact parts or products you need to keep that 1981 Oldsmobile 98 running smoothly.

Performance Ignition Products are only as good as their brand. We stock 4 different brands to make sure you have plenty of trusted parts to choose from for your 1981 Oldsmobile 98. Hypertech, Accel, and Mallory are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Performance Ignition Products for your 1981 Oldsmobile 98, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Performance Ignition Products to keep your 1981 Oldsmobile 98 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Performance Ignition Products Brands To Make Your 1981 Oldsmobile 98 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1981 Oldsmobile 98 demands trusted brand parts and products to keep it running. Many trusted brands of Performance Ignition Products make up Advance Auto Parts’ inventory, and all are ready to help make your 98 the best it can be. Be sure to browse some of our top Performance Ignition Products brands and parts.

Popular Accel Performance Ignition Products

We carry Accel parts in our stock across Performance Coils categories, plus more. For a 1981 Oldsmobile 98, our most popular Accel Performance Ignition Products include:
Super Coil
from $95.99
(3)
Super Coil
Performance Coils

FAQs for 1981 Oldsmobile 98 Performance Ignition Products

What are the most purchased Performance Ignition Products for the 1981 Oldsmobile 98?

Out of 4 Performance Ignition Products for the 1981 Oldsmobile 98, the most popular in our inventory are:
Power Coil Kit for GM HEI Systems with Clamp Down Cap
from $95.99
This product is not rated
Power Coil Kit for GM HEI Systems with Clamp Down Cap
Performance Coils
Distributor Wiring Harness
from $25.99
This product is not rated
Distributor Wiring Harness
Performance Ignition Parts
Wire Set; Street Fire; Multi-Angle plug; HEI; Universal
from $67.99
(3)
Wire Set; Street Fire; Multi-Angle plug; HEI; Universal
Performance Spark Plug Wires