1981 Nissan 510 Car Parts & Accessories

Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:

• Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
• Easy Install – Less than 15 Minutes! based on average install time across all parts
• No Special Tools Required
• Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
• OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
• OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
• World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
• Trilingual Install Instructions provided inside each package

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

• High torque and rigidity
• Sensor-safe, non-corrosive formula
• OEM specified
• Low-odor, non-corrosive formula
• Ideal for closed spaced bolt patterns

Product Features:

• Imperial high-performance transmission cooler
• Size: 3/4″ x 10″ x 15-7/8″
• SAE 45-degree fittings for maximum reliability
• Electrostatic powder-coated to prevent corrosion
• SAE 45 degree fittings for maximum reliability
• Electrostatically powder coated to prevent corrosion
• All aluminum lightweight construction

The Imperial Maxi-Cool® XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

• Imperial Maxi-Cool® plate and fin transmission cooler
• Size: 3/4″ x 11″ x 7-1/2″
• Mid-size and full-size cars, pickups
• GVWR up to 20,000 lbs.; towing up to 2,500 lbs.

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Low swell in hydrocarbon fluids
• Design type: spring loaded; multi-lip
• Provides good low temperature capability
• Temperature range: -40°F to 225°F; -40°C to 107°C
• Delivers quality and reliable performance for every type of repair

Product Features:

• Imperial Rapid-Cool« plate and fin transmission cooler
• Size: 3/4″ x 11″ x 6″
• Sub-compact to compact cars
• GVWR up to 18,000 lbs.
• Compatible with OEM cooler systems

Product Features:

• Imperial Econo-Kool« tube and fin transmission cooler
• Size: 3/4″ x 5″ x 15-7/8″
• Compact and mid-size cars
• GVWR up to 16,000 lbs.; towing up to 2,500 lbs.
• Compatible with OEM cooler systems
• Ultrasonically soldered for reliability
• 100% pressure testing to 150 PSI for quality assurance
• High efficiency turbulators

Product Features:

• Imperial Econo-Kool« tube and fin transmission cooler
• Size: 3/4″ x 5″ x 12-1/2″
• Sub-compact to compact cars
• GVWR up to 12,000 lbs.
• Compatible with OEM cooler systems
• Ultrasonically soldered for reliability
• 100% pressure testing to 150 PSI for quality assurance
• High efficiency turbulators

Product Features:

• Imperial Rapid-Cool« plate and fin transmission cooler
• Size: 3/4″ x 11″ x 9-1/2″
• Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
• GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
• 33% more efficient than a comparable tube and fin design

Product Features:

• Mid-size and full-size cars, pickups
• GVWR up to 18,000 lbs.; towing up to 3,500 lbs
• Compatible with OEM cooler systems
• Ultrasonically soldered for reliability
• 100% pressure testing to 150 PSI for quality assurance
• High efficiency turbulators

High Performance Transmission Oil Cooler 3/4″ x 7-1/2″ x 15-1/2″. Heavy duty. Black. Imperial High Performance coolers are designed to provide outstanding cooling as well as complement other high-performance accessories.

Product Features:

• Imperial high-performance transmission cooler
• Size: 3/4″ x 7-1/2″ x 15-7/8″
• SAE 45-degree fittings for maximum reliability
• Electrostatic powder-coated to prevent corrosion

Permatex’s The Right Stuff 90 Minute Series offers the fastest return to service in a in just 90 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 90 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

• Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
• Sensor-safe, non-corrosive, RTV silicone
• Protects against leaks caused by vibration and thermal expansion
• Meets performance specs of OE silicone gaskets
• Quickly returns vehicle to service in just 90 minutes

Product Features:

• Imperial high-performance transmission cooler
• Size: 3/4″ x 7-1/2″ x 12-1/2″
• SAE 45-degree fittings for maximum reliability
• Electrostatic powder-coated to prevent corrosion
• SAE 45 degree fittings for maximum reliability
• Electrostatically powder coated to prevent corrosion
• All aluminum lightweight construction

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Low swell in hydrocarbon fluids
• Design type: spring loaded; multi-lip
• Provides good low temperature capability
• Temperature range: -40°F to 225°F; -40°C to 107°C
• Delivers quality and reliable performance for every type of repair

Product Features:

• Brand may vary by location

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Low swell in hydrocarbon fluids
• Design type: spring loaded; multi-lip
• Provides good low temperature capability
• Temperature range: -40°F to 225°F; -40°C to 107°C
• Delivers quality and reliable performance for every type of repair

This clutch pilot bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this clutch pilot bushing matches the fit and function of the factory part on specified years, makes and models
• Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

• Premium bearing design matches OEM specifications
• Precision manufactured using premium-grade steel for outstanding durability and performance
• Matched cup and cone components ensures consistent quality and outstanding performance
• Industry leading coverage
• Professional technicians know they can depend on National

AT MODULATOR VALVE

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Unsurpassed quality you can trust
• Validated for fit, form and function
• Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

OEM specified. Designed specially for high-torque and high vibration applications, like those common in import engines, this premium RTV gasket maker exceeds manufacturers’ performance requirements. Sensor-safe, low odor, and non-corrosive. Maximum vibration resistance, with outstanding resistance to oils, cooling and shop fluids. Temperature range -65ºF to 500ºF (-54 Deg. C to 260 Deg. C) intermittent.

Product Features:

• Designed specially for high-torque and high vibration applications
• Maximum vibration resistance with outstanding resistance to oils, cooling and shop fluids
• OEM specified
• Low-odor, non-corrosive formula
• Temperature Range: -65 Deg. F to 500 Deg. F (-54 Deg. C to 260 Deg. C)

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

• Premium bearing design matches OEM specifications
• Precision manufactured using premium-grade steel for outstanding durability and performance
• Controlled heat treating process for lasting performance and extended bearing life
• Industry leading coverage
• Professional technicians know they can depend on National

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Drive Axle Seal

SKF’s clutch pilot bushings help guide and locate the driving plate in radial and axial directions and transfer loads from the clutch to the gearbox input shaft. They also enable a difference in rotational speed between crankshaft and gearbox input shafts during clutch actuation.

Product Features:

• Extended service life
• High running accuracy
• Low noise and vibration level
• Extremely compact, lightweight design
• Very high temperature resistance

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

• Premium bearing design matches OEM specifications
• Precision manufactured using premium-grade steel for outstanding durability and performance
• Controlled heat treating process for lasting performance and extended bearing life
• Industry leading coverage
• Professional technicians know they can depend on National

The Nabtesco Clutch Master Cylinder is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

• Premium Original Equipment replacement
• Provides performance and dependability
• Manufactured to meet OE specifications

Schaeffler has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.

LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.

Product Features:

• Application matched for OE form, fit, and function
• Manufactured with high-quality materials, using cutting edge technology and processes
• Stock photo – Actual parts and materials may vary.

LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.

FLYWHEEL SHIM

Koyo designs, manufacturers and supplies a wide range of ball and roller bearings to the world’s leading automotive manufacturers. Koyo clutch release bearings offer the conventional alignment function in a lightweight, compact body.

Product Features:

• Extended service life
• Compact, lightweight design
• Sealed for life with high performance, application-specific grease
• Integrated functionality
• Design for high temperature, and high rotating speed

This clutch pilot bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this clutch pilot bushing matches the fit and function of the factory part on specified years, makes and models
• Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

This clutch pilot bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this clutch pilot bushing matches the fit and function of the factory part on specified years, makes and models
• Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

AVS continues its high-quality automotive accessories with the AVS Windflector. Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:

• The Windflector greatly reduces sunroof wind noise and air turbulence
• Prevents the rain from entering the sunroof opening while driving
• Helps reduce heat buildup inside the vehicle
• Available in 5 different sizes for perfect fit
• No drill installation
• Installs quickly and easily with 3M automotive-grade adhesive

AVS continues its high-quality automotive accessories with the AVS Windflector. Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:

• The Windflector greatly reduces sunroof wind noise and air turbulence
• Prevents the rain from entering the sunroof opening while driving
• Helps reduce heat buildup inside the vehicle
• Available in 5 different sizes for perfect fit
• No drill installation
• Installs quickly and easily with 3M automotive-grade adhesive

AVS continues its high-quality automotive accessories with the AVS Windflector. Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:

• The Windflector greatly reduces sunroof wind noise and air turbulence
• Prevents the rain from entering the sunroof opening while driving
• Helps reduce heat buildup inside the vehicle
• Available in 5 different sizes for perfect fit
• No drill installation
• Installs quickly and easily with 3M automotive-grade adhesive

AVS continues its high-quality automotive accessories with the AVS Windflector. Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:

• The Windflector greatly reduces sunroof wind noise and air turbulence
• Prevents the rain from entering the sunroof opening while driving
• Helps reduce heat buildup inside the vehicle
• Available in 5 different sizes for perfect fit
• No drill installation
• Installs quickly and easily with 3M automotive-grade adhesive

AVS continues its high-quality automotive accessories with the AVS Windflector. Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:

• The Windflector greatly reduces sunroof wind noise and air turbulence
• Prevents the rain from entering the sunroof opening while driving
• Helps reduce heat buildup inside the vehicle
• Available in 5 different sizes for perfect fit
• No drill installation
• Installs quickly and easily with 3M automotive-grade adhesive

AVS continues its high-quality automotive accessories with the AVS Windflector. Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:

• The Windflector greatly reduces sunroof wind noise and air turbulence
• Prevents the rain from entering the sunroof opening while driving
• Helps reduce heat buildup inside the vehicle
• Available in 5 different sizes for a perfect fit
• No drill installation
• Installs quickly and easily with 3M automotive-grade adhesive

As the most heavy duty car covers on the market, the WeatherShield HD car cover is built to handle the most intense weather and climates. Toughest of the tough, the WeatherShield HD car covers are constructed from 40% heavier fabric and stronger thread providing double the tear strength, double the tensile strength. Proprietary processes place a specially formulated finish inside the fabric, bonding each individual thread so there is virtually no space between them for water or dirt or pollutants to enter. The WeatherShield HD may not be as silky-smooth as other car covers, but it will out perform them in harsh climates! Designed as a long-term storage solution.

Product Features:

• The most heavy-duty car cover on the market
• Specially treated to resist fading and color transfer
• Sheds water and blocks out dust
• Outsmart the outdoors!

For those who like traditional woven fabrics for indoor car cover protection, the Tan Flannel is the perfect choice. This is a high performance indoor fabric with a durable Polycotton blend on the outside and a flannel underside soft napped finish. Its long wearing and breathable. Specially treated to repel moisture and resist rot and mildew.

Product Features:

• A favorite amongst car enthusiasts
• Flannel lined for an ultra-soft, paint-friendly cover
• Constructed from all cotton based materials
• Our ‘classic’ indoor cover

Covercraft’s custom fit Polycotton Car Cover provides good basic indoor protection for your vehicle. A good choice for a budget conscience shopper looking for basic coverage and protection. Constructed from drill weave Polycotton blend materials. Fabric is soft and durable to protect your paint finish. Polyester material is sun and water resistant. Comes in gray.

Product Features:

• Good basic indoor protection
• Drill weave Polycotton blend
• Resists tears and punctures
• Treated to resist rot and mildew

AVS continues its high-quality automotive accessories with the AVS Windflector. Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:

• The Windflector greatly reduces sunroof wind noise and air turbulence
• Prevents the rain from entering the sunroof opening while driving
• Helps reduce heat buildup inside the vehicle
• Available in 5 different sizes for a perfect fit
• No drill installation
• Installs quickly and easily with 3M automotive-grade adhesive

Our replacement pedal pads are made of hardened rubber, ridged and designed to withstand continual wear and tear.

Product Features:

• Easy installation-just slip the pad onto the brake pedal
• Weather-resistant
• Direct replacement for proper fit
• Pedal pads can also be used on clutch (where applicable)

Standard Installation Kit. This is the standard Grant Steering Wheel Installation Kit. These kits may be used to install all Classic Series, Challenger Series or Signature Series Steering Wheels. Each kit contains complete step-by-step instructions, a die cast hub, grade 5 hardware and matte black trim pieces.

Product Features:

• Use To Install All Classic, Challenger Or Signature Series Wheels
• Each Kit Contains Complete Step-By-Step Instructions, A Die Cast Hub, Grade 5 Hardware And Matte Black Trim Pieces
• ISO/ TS Certified
• Designed To Mount Our Wheel To Your Rig
• Use with all Grant Classic/Challenger/Signature Steering Wheels

VelourMat dashboard covers are constructed of soft, elegant velour material. Each VelourMat is custom made for a precise fit. Dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

• Made of soft elegant rich velour
• Custom made to fit each dashboard
• Hook & loop fasteners included for easy & secure installation
• Cuts hazardous windshield glare
• Protects dashboard from sun damage stopping cracks and warping
• Passenger-side airbag opening included where applicable

The Limited Edition Custom Dashboard Cover features a new warp-knit polyester fabric style that looks great with today’s vehicle interiors. Individually made to fit your vehicle’s specific dashboard. DashMat dashboard covers are a stylish way to cut windshield haze caused by gasses emitted from the dashboard. Dramatically reduces hazardous windshield glare as well. Rays from the sun beat through the dashboard at extremely high temperatures causing damage to the dashboard. Limited Edition DashMat dash covers protect your vehicle’s dashboard in the most extreme temperature conditions.

Product Features:

• Unique warp-knit design fits perfectly with today’s vehicle interiors
• Compliments technical fabrics in newer vehicles
• Custom fit to the dashboard of your vehicle
• Helps prevent dashboard warping and cracking
• Reduces hazardous windshield glare
• Vents and sensor openings pre-cut for a factory finish look
• Passenger-side airbag opening included where applicable
• Hook and loop fasteners included for easy secure installation

Speedometer cables connect the speedometer to the transmission. Old cables can bind, break, or just become sluggish. The best repair is to replace the old cable with a new one. ATP Speedometer cables are designed to fit and function just like the original part to ensure durability and long life.

Product Features:

• Includes Cable Lube
• Plastic sheath protects cable from debris and water
• Comes ready to install

The Ohno Clutch Pedal Pad is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

• Premium Original Equipment replacement
• Provides performance and dependability
• Manufactured to meet OE specifications