1981 Mercury Capri Steering and Chassis Parts

Essential 1981 Mercury Capri Steering and Chassis Parts

Cardone – Power Steering Pump (Part No.20-6240)

Power Steering Pump

from

$63.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:
  • All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
  • All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
  • Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
  • Units are supplied with 100% tested and calibrated pressure relief valves.
  • Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Driveworks – Taper Bearing Cone (Part No.S-M-88048)

Taper Bearing Cone

from

$11.29
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Whiteline – Ball Joint Lower (Part No.W53557)

Ball Joint Lower

from

$67.99
High Quality Greaseable replacment Ball Joint

Product Features:
  • Protective E-Coat coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
See More

Rare Parts – Tie Rod End (Part No.RP26144)

Tie Rod End

from

$60.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Restores OE alignment
  • Reduces tire wear
  • Improves steering response
See More

Energy Suspension – Sway Bar Bushing Set (Part No.4.5109G)

Sway Bar Bushing Set

from

$19.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:
  • Allows Sway Bar System to Work At 100% Efficiency
  • Zerk Type Fittings
  • Allows for Periodic Greasing
  • Lasts Much Longer Than OEM Rubber Bushings
  • Handling Characteristics Improve Dramatically
See More

Dorman – Help – Power Steering Caps (Part No.82582)

Power Steering Caps

from

$7.99
This power steering reservoir cap is a direct replacement for a cracked, worn or missing original equipment cap to prevent fluid leaks and steering system contamination.

Product Features:
  • Ideal replacement – this power steering reservoir cap matches the fit, function and appearance of a damaged or missing original equipment cap
  • Durable construction – made of quality materials for leak-free performance and a long service life
  • Cost-effective solution – offers original equipment quality at competitive price
  • Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable performance
See More

Whiteline – Camber Adjusting Bolt (Part No.KCA412)

Camber Adjusting Bolt

from

$48.99
Suffering uneven tyre wear? Sounds like poor alignment. Whiteline camber bolts provide the largest adjustment range (of up to +/- 1.5deg) to get that alignment back in check. Unlike other ‘friction’ lock designs we use a positive toothed lock washer which means NO SLIP. Simple to adjust and lock time after time with out slipping.

Product Features:
  • Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
See More

Carquest Premium – Pressure Hose Assembly (Part No.36438)

Pressure Hose Assembly

from

$85.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Dorman – Help – Power Steering Caps – Power Steering Sealing Washer Assortment (Part No.82540)

Power Steering Caps - Power Steering Sealing Washer Assortment

from

$4.49
This power steering pump washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this power steering pump washer matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

National – Multi Purpose Seal (Part No.340151)

Multi Purpose Seal

from

$15.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

National – Multi Purpose Seal (Part No.8773S)

Multi Purpose Seal

from

$9.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Dorman – Power Steering Reservoir: Black, Plastic, Original Equipment Replacement (Part No.603-900)

Power Steering Reservoir: Black, Plastic, Original Equipment Replacement

from

$33.99
This replacement power steering fluid reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is thoroughly tested to ensure optimum fit on specific vehicle applications.

Product Features:
  • Direct replacement – this power steering fluid reservoir fits and functions like original equipment for a trouble-free installation
  • Complete assembly – includes reservoir and reservoir cap
  • Reliable performance – built to withstand excessive heat and vibration
  • Quality tested – this part has undergone on-vehicle testing to ensure a quality fit and long service life
See More

National – Multi Purpose Seal (Part No.471645)

Multi Purpose Seal

from

$13.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

MOOG – Rack & Pinion Bellows Kit (Part No.K9882)

Rack & Pinion Bellows Kit

from

$39.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Manufactured using premium materials
  • Engineered to provide long life and dependability
  • Construction and design validated by MOOG engineers
  • Incorporates proven design and engineering features
See More

Cardone – Rack and Pinion Assembly (Part No.22-203A)

Rack and Pinion Assembly

from

$178.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.

Product Features:
  • 100% replacement of rubber sealing components.
  • Application of specialized lubricant(s) for extended life.
  • Finished in protective coating to prevent corrosion and rust.
  • Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
See More

MOOG – Ball Joint (Part No.K8259)

Ball Joint

from

$73.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

Powercraft – Pump Drive Shaft Seal Kit (Part No.8711)

Pump Drive Shaft Seal Kit

from

$7.79
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Cardone – Power Steering Filter (Part No.20-0012F)

Power Steering Filter

from

$46.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Rare Parts – Sway Bar Link Kit (Part No.RP16304)

Sway Bar Link Kit

from

$41.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Rubber or Thermoplastic material
  • No Squeak
  • Complete with bolt ,washers, and nut
  • Improves body roll
See More

Imperial – Power Steering Oil Cooler Medium Duty (Part No.241010)

Power Steering Oil Cooler Medium Duty

from

$36.49
3/4″ x 2-1/2″ x 12″ power steering oil cooler medium duty. Imperial power steering coolers provide additional protection to help prolong the life of the system’s pump, hoses and seals.

Product Features:
  • Medium-duty power steering oil cooler
  • Size: 3/4″ x 2-1/2″ x 12″
  • For vehicle with 3/8″ ID power steering return hose
  • Removes destructive heat and helps prolong power steering system life
See More

National – Bearings (Part No.A-2)

Bearings

from

$15.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Powercraft – Rack Pinion Seal Kit (Part No.8589)

Rack Pinion Seal Kit

from

$86.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Energy Suspension – Tie Rod Dust Boot (Part No.9.13102R)

Tie Rod Dust Boot

from

$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:
  • Easy to Install
  • Superior Material
  • Saves Your Tie Rods
  • Lasts Longer
  • Looks Great
See More

Energy Suspension – Ball Joint Dust Boot Set (Part No.9.13130R)

Ball Joint Dust Boot Set

from

$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:
  • Easy to Install
  • Superior Material
  • Lasts Longer
  • Looks Great
See More

Cardone – Rack and Pinion Bushing Kit (Part No.22-207MB)

Rack and Pinion Bushing Kit

from

$26.99
CARDONE Rack and Pinion Bushing Kits include new components designed to meet OEM performance for form, fit, and function. Now you can replace only the bushings without removing the entire steering rack to get you back on the road faster. All components necessary to complete the job are included to ensure your vehicle runs smoothly.

Product Features:
  • Urethane bushings and steel inserts enhance road feel and provides greater durability than typical rubber bushings
  • 100% new bushing kit ensures long lasting performance
  • All components included for complete repair and are application specific
  • Guaranteed fit and function
  • Meets or exceeds O.E.M performance
See More

Powercraft – Pump Seal Kit (Part No.8526)

Pump Seal Kit

from

$13.79
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Powercraft – Rack Pinion Seal Kit (Part No.8591)

Rack Pinion Seal Kit

from

$77.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Driveworks – Camber Bolt Kit (Part No.DW-K90476)

Camber Bolt Kit

from

$8.99
Camber Bolt Kit

1981 Mercury Capri Steering and Chassis Parts

You count on your 1981 Mercury Capri to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 106 Steering and Chassis Parts ranging in price from $2.99 to $552.99, you’re sure to find everything you need for your 1981 Mercury Capri.

Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 14 different brands like Driveworks, Imperial, and Carquest Premium. 1981 Mercury Capri Steering and Chassis Parts start as low as $2.99!

One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 3,007 extensive product reviews on 1981 Mercury Capri Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Power Steering Filter with 3.8 stars and Bearings with 4.7 stars.

Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1981 Mercury Capri below to get started!

Top-Rated Steering and Chassis Parts Brands For Your 1981 Mercury Capri

Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1981 Mercury Capri running right for years to come. In our inventory you’ll find brands like Driveworks, Imperial, Carquest Premium, and even more.

Popular MOOG Steering and Chassis Parts

You’ll find popular MOOG brand products across Camber Kits. All are waiting to get your 1981 Mercury Capri back on the road. Some of the top-rated MOOG products in these categories are:
Camber Adjusting Kit
from $28.99
(1)
Camber Adjusting Kit
Camber Kits
Camber Adjusting Kit
from $32.99
(1)
Camber Adjusting Kit
Camber Kits
Camber Adjusting Kit
from $23.99
(3)
Camber Adjusting Kit
Camber Kits

Top-Rated Imperial Steering and Chassis Parts


If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Steering and Chassis Parts for your 1981 Mercury Capri, and some of our most reviewed Imperial parts include:
Transmission Oil Cooler Hose
from $32.49
(94)
Transmission Oil Cooler Hose
Power Steering Pressure Hoses
Power Steering Oil Cooler
from $28.49
(83)
Power Steering Oil Cooler
Power Steering Coolers
Mounting Kit System
from $11.49
(27)
Mounting Kit System
Power Steering Coolers

FAQs for 1981 Mercury Capri Steering and Chassis Parts

What are the most purchased Steering and Chassis Parts for the 1981 Mercury Capri?

Out of 106 Steering and Chassis Parts for the 1981 Mercury Capri, the most popular in our inventory are:
Suspension Sway Bar Link Kit
from $17.29
(120)
Suspension Sway Bar Link Kit
Sway Bar Link Kits
Bulk - 3/8" I.D. Return Hose (J189) (sold by foot)
from $7.79
This product is not rated
Bulk – 3/8" I.D. Return Hose (J189) (sold by foot)
Power Steering Reservoir Hoses
Stabilizer Bar Link Kit
from $31.99
(56)
Stabilizer Bar Link Kit
Sway Bar Link Bushing Kits

What are the top-rated 1981 Mercury Capri Steering and Chassis Parts?

Top-rated Steering and Chassis Parts for your 1981 Mercury Capri based on customer reviews/ratings are:
Power Steering Filter
from $31.99
(59)
Power Steering Filter
“Looks good and fits well, plus LTW”
Bearings
from $15.99
(38)
Bearings
“1976 Cutlass. Seem like a good bearing”
SWAY BAR LINK KIT 1 EA DRIVE
from $17.79
(20)
SWAY BAR LINK KIT 1 EA DRIVE
“Works Great!!”