1981 Mercedes-Benz 300CD Cooling and Climate Controls
More 1981 Mercedes-Benz 300CD Cooling and Climate Controls Categories
If you’re looking for an original Cooling and Climate Controls replacement for a 1981 Mercedes-Benz 300CD, you can search through our selection below. You’ll also find aftermarket and OEM Cooling and Climate Controls to meet your needs.
Essential 1981 Mercedes-Benz 300CD Cooling and Climate Controls
Carquest Premium – New Compressor with Clutch, GM R4 Heavy (Part No.T58228)
from
$315.99
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- All compressors go through sophisticated testing and leak test processes
- Includes specific electrical connector to eliminate splicing
- For ease of installation this compressor includes all gaskets, O-rings or sealing washers needed to repair your car
- Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function, and durability
- Double lip shaft seal to reduce refrigerant leakage over time requiring less maintenance
ACM – Air Conditioning Temperature Switch (Part No.R105511825ACM)
from
$33.17
ACM is a supplier of Original Equipment quality climate control products. 2 spade terminals on short pigtail.
See More
Carquest Premium – Standard Thermostat: 180 Degrees (Part No.13588)
from
$22.99
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Permatex – Sensor-Safe, High Torque RTV Silicone Gasket Maker (Part No.22074)
from
$6.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.
Product Features:
See More
Product Features:
- High torque and rigidity
- Sensor-safe, non-corrosive formula
- OEM specified
- Low-odor, non-corrosive formula
- Ideal for closed spaced bolt patterns
Behr – A/C Pressure Switch (Part No.R1054178181BEH)
from
$22.52
Behr GmbH & Co. KG, Stuttgart, is a specialist for automotive air conditioning and engine cooling systems, the Behr Group is one of the world’s leading manufacturers and suppliers of Original Equipment cooling and air conditioning products for European passenger and commercial vehicles. 2 bar low pressure and 30 bar high pressure binary switch. This switch is designed to be compatible with R-12 and R134a refrigerants. Located on receiver-drier with 2 spade terminals. Used for compressor cut-out.
See More
Factory Air – Sealing Washer Kit (Part No.24338)
from
$5.29
Includes O-Ring; Compatible with R12 And R134A; High quality construction; Universal applications
See More
Carquest Premium – Radiator Cap: 13 PSI (Part No.10229)
from
$9.79
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.
Product Features:
See More
Product Features:
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Driveworks – Ball Bearing (Part No.S-907257)
from
$22.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Carquest Premium – A/C New; w/o Clutch; w/ 209-210 Compressor (Part No.T58066)
from
$377.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
- New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
- The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
- All new compressors must pass a helium leak test and pump up function test prior to packaging.
- O-Rings and gaskets necessary for installation are included.
- O-Rings and gaskets necessary for installation are included.
Behr – Radiator Drain Plug (Part No.G106011756BEH)
from
$11.09
Radiator Drain Plug
Santech – A/C Pressure Switch (Part No.R1054178181SII)
from
$18.63
A/C Pressure Switch
Carquest Premium – A/C Filter Drier (Part No.T33396)
from
$27.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.
Product Features:
See More
Product Features:
- All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
- Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
- All accumulators and receiver driers are helium leak tested prior to packaging.
- O-Rings necessary for installation are included.
- O-Rings necessary for installation are included.
Programa – Temperature Control Regulator (Part No.R202849489PRO)
from
$278.58
Temperature Control Regulator
Permatex – Sensor-Safe, High-Torque RTV Silicone Gasket Maker (Part No.82194)
from
$11.49
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.
Product Features:
See More
Product Features:
- High torque and rigidity
- Sensor-safe, non-corrosive formula
- OEM specified
- Low-odor, non-corrosive formula
- Ideal for closed spaced bolt patterns
Dorman – 5-Wire Style Relay (Part No.85170)
from
$15.99
This HVAC relay connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this HVAC relay connector matches the appearance and function of the factory hardware on specified applications
- Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Factory Air – Green Round O-Ring (Part No.24615)
from
$1.99
Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications
See More
Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26771)
from
$11.49
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- All the seals needed to complete the job
- Compatible with both R12 and R134a refrigerants
- Application specific
- SUV and rear air applications
APA/URO – Blower Motor (Part No.R203116266APA)
from
$199.80
APA/URO manufactures a high quality replacement Blower Motor that meets or exceeds the vehicle manufacturer’s specifications for fit, durability and quality.
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct Fit Replacement.
- High quality OE electrical components.
- OE quality brushes and bearings.
- Balanced rotor assembly.
Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)
from
$28.49
Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.
Product Features:
See More
Product Features:
- Ideal for rigid cast aluminum parts
- Meets OEM Specifications
- Sensor safe & non-corrosive
- Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
- Blowout resistant, allowing leakproof gaskets to be made in just one minute
- Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
- Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
- Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
- Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.
Carquest Premium – Universal Reverse Rotation Thermal Standard Duty Fan Clutch (Part No.215131)
from
$164.99
Product Features:
See More
- Designed, tested, and built by application
- OE performance, fit, and appearance
- Precision machined
- Out of box installation
Meistersatz – Oil Drain Plug Gaske (Part No.A6120860165MEI)
from
$0.62
Oil Drain Plug Gaske
Behr – Air Conditioning Evaporator Temperature Sensor, Without Bracket (Part No.R107137676BEH)
from
$64.09
Air Conditioning Evaporator Temperature Sensor, Without Bracket
Factory Air – Green Round O-Ring (Part No.24610)
from
$0.99
Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications
See More
Factory Air – Cap & Valve A/C System Seal Kit (Part No.26777)
from
$16.99
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- All the seals needed to complete the job
- Compatible with both R12 and R134a refrigerants
- SUV and rear air applications
- Application specific
Geba – Water Pump (Part No.G3000948542GEB)
from
$58.62
The GEBA Water Pump contains no remanufactured components and is manufactured to ensure high efficiency and optimal cooling under all conditions. Geba maintenance free Bearings with ball and roller spindle bearings are designed for the highest axial and radial stresses. Up to Date unitized sealing technology ensure optimal leak tightness and longevity. All housings are examined before the assembly. This procedure guarantees high reliability and life span of GEBA water pumps.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application.
- 100% new with no remanufactured parts.
- High quality cast aluminum.
- Advanced bearing design for high axial and radial stresses.
- Unitized sealing technology that ensures optimal leak tightness and longevity.
- Optimum cooling performance and longevity.
Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T1075)
from
$48.49
Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.
Product Features:
See More
Product Features:
- 100% tested for reliable performance
- Durable housing features precisely machined mounting surface for proper sealing and fitment
- Equipped with weep chamber or similar feature to help prevent unnecessary replacement
- Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
- All gaskets or seals necessary for water pump are included
- This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
- This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
- This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components
ACM – Auxiliary Fan Assembly (Part No.G500011754ACM)
Flex A Lite – Black Magic Electric Fan (Part No.160)
from
$347.99
Black Magic Electric Fan
Popular 1981 Mercedes-Benz 300CD Cooling and Climate Controls Categories
1981 Mercedes-Benz 300CD Cooling and Climate Controls
You count on your 1981 Mercedes-Benz 300CD to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Cooling and Climate Controls. With 57 Cooling and Climate Controls ranging in price from $0.62 to $468.83, you’re sure to find everything you need for your 1981 Mercedes-Benz 300CD.
Brands matter. If you want to shop a specific Cooling and Climate Controls brand, we stock 20 different brands like Permatex, Carquest Premium, and Factory Air. 1981 Mercedes-Benz 300CD Cooling and Climate Controls start as low as $0.62!
One of the best ways to find top quality OEM or aftermarket Cooling and Climate Controls is by asking professionals. Short of that, you can shop with confidence thanks to our 510 extensive product reviews on 1981 Mercedes-Benz 300CD Cooling and Climate Controls. Some of the top-rated Cooling and Climate Controls products we carry are Ball Bearing with 2.3 stars and Reman GM R4 Heavy Compressor w/ Clutch with 5.0 stars.
Did we mention you can order your Cooling and Climate Controls from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Cooling and Climate Controls inventory for your 1981 Mercedes-Benz 300CD below to get started!
Top-Rated Cooling and Climate Controls Brands For Your 1981 Mercedes-Benz 300CD
Trusted Cooling and Climate Controls OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1981 Mercedes-Benz 300CD running right for years to come. In our inventory you’ll find brands like Permatex, Carquest Premium, Factory Air, and even more.
Popular Permatex Cooling and Climate Controls
You’ll find popular Permatex brand products across Engine Cooling Parts. All are waiting to get your 1981 Mercedes-Benz 300CD back on the road. Some of the top-rated Permatex products in these categories are:
from
$19.99
(2)
The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ
Engine Water Pump Inlet Pipe Gaskets
from
$6.99
(9)
Sensor-Safe, High Torque RTV Silicone Gasket Maker
Engine Water Pump Inlet Pipe Gaskets
Top-Rated Cooling and Climate Controls
If are what you’re looking for, our inventory holds plenty. We stock brand Cooling and Climate Controls for your 1981 Mercedes-Benz 300CD, and some of our most reviewed parts include:
from
$6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Engine Water Pump Inlet Pipe Gaskets
FAQs for 1981 Mercedes-Benz 300CD Cooling and Climate Controls
What are the most purchased Cooling and Climate Controls for the 1981 Mercedes-Benz 300CD?
Out of 57 Cooling and Climate Controls for the 1981 Mercedes-Benz 300CD, the most popular in our inventory are:
What are the top-rated 1981 Mercedes-Benz 300CD Cooling and Climate Controls?
Top-rated Cooling and Climate Controls for your 1981 Mercedes-Benz 300CD based on customer reviews/ratings are:
from
$219.99
(2)
Reman GM R4 Heavy Compressor w/ Clutch
“So far so good, Easy to install, It works great, Time will tell. Shipping and service was above average.”
from
$22.99
(2)
Standard Thermostat: 180 Degrees
“Perfect fit, this is the correct spec. temperature for my 240D. I think the old one was a higher temp. put in by the previous owner. The car is runnin”
