1980 Oldsmobile Toronado Performance and Racing Products
More 1980 Oldsmobile Toronado Performance and Racing Products Categories
If you’re looking for an original Performance and Racing Products replacement for a 1980 Oldsmobile Toronado, you can search through our selection below. You’ll also find aftermarket and OEM Performance and Racing Products to meet your needs.
Essential 1980 Oldsmobile Toronado Performance and Racing Products
Mallory – Distributor Wiring Harness (Part No.29349)
Edelbrock – Performer-Link Adjustable True-Roller Timing Chain Set (Part No.7813)
from
$97.99Product Features:
- Solid Bushing Chain Resists Stretching
- For Use with Stock or Edelbrock Camshafts
- Stressproof Steel Crank Gears
- 3 Keyway Setting Points To Ensure Accurate Timing
- True Bearing Surface Rolls with the Sprockets
B & M – Holeshot 3600 (Part No.20425)
from
$825.99
HoleShot 3600 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: HoleShot 3600 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benefits in vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low end power and torque. The high stall converter allows the engine to launch the car at higher rpm where more torque is available. The Holeshot is generally a very good choice for the typical street machine that is looking for better launch capability and more strength. Street rods with modified engines will also benefit from a Holeshot converter. If your vehicle is equipped with a plate type nitrous system, you will need a Nitrous Holeshot!! Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Furnace brazed impeller. New precision steel alloy pump drive tube. New heavy duty needle bearing between stator and impeller (not a thrust washer). Needle bearing between stator and turbine. Furnace brazed turbine. Dual pattern drive lugs on some GM Holeshots. New turbine hub. New springs and rollers in stator.
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
- Dual Pattern Drive Lugs
- New Turbine Hub
- New Springs/Rollers In Stator
PerTronix – D9001 Flame-Thrower HEI Distributor Advance Curve Kit (Part No.D9001)
from
$26.99
Mechanical Advance Curve Ki tPrecision machined chromoly weights and center plate eliminate erratic timing. Three sets of springs, guide bushings and complete installation instructions make recurving your distributor easy.
Product Features:
See More
Product Features:
- PerTronix D9001 Flame-Thrower HEI Distributor Advance Curve Kit
- Precision machined chromoly weights and center plate.
Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)
from
$26.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens At 180 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
Edelbrock – RPM Air-Gap Oldsmobile 455 Intake Manifold (Part No.7551)
from
$613.99
Edelbrock part #7551 Performer RPM Air-Gap Oldsmobile 455 intake manifold is intended for aggressive street/ strip big-block Oldsmobile applications. Designed to optimize horsepower production from 1500 to 6500 rpm, this manifold will perform best with en
Product Features:
See More
Product Features:
- 1500-6500 RPM Range
- Dual Plane Type-4150 Style Flange
- 5.04 in. Front Height, 5.54 in. Center Height, 6.04 in. Rear Height
- Satin Finish
- Non-EGR
Accel – Ignition/Electrical (Part No.130120)
from
$16.99
ACCEL Hi-Performance rotors offer superior protection from arc-thru and crossfire. Features hi-performance 60,000 volt alkyd compound, stress-relieved at molding to ensure stability and resist centrifugal forces at high racing RPMs.
Product Features:
See More
Product Features:
- Max stability for all RPM ranges
- Heavy duty for maximum energy transfer
MSD Ignition – Wire Set; Street Fire; Multi-Angle plug; HEI; Universal (Part No.5550)
from
$72.39
The street fire spark plug wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.
Product Features:
See More
Product Features:
- Helically wound conductor suppresses electro and radio noise
- Kevlar core combination for great strength and durability
- Heavy Duty Terminals For Secure Connection
- 8mm silicone and synthetic jacket resists heat and abrasion
- 500 Ohms/ft. Resistance For Improved Spark Delivery And Power
- Silicone Boots Protect Against High Exhaust Temps
K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.33-2022)
from
$54.99
K&N performance High-Flow Air Filters are engineered to improve engine performance. Unlike disposable paper filters which must be frequently replaced, K&N Air Filters are washable, reusable, and engineered to last for the life of your vehicle. K&N air filters are backed by our famous 10-Year/Million Mile Limited Warranty, and they provide an environmentally friendly way to reduce landfill waste by avoiding disposable filters. Engineered to fit easily into your factory air box, installation can be completed in a matter of minutes! K&N develops and tests each product on the world┐s toughest race tracks, so we can bring the highest level of performance to your daily driving. Join the millions of customers who have saved money and improved vehicle performance by upgrading to K&N filtration.
Product Features:
See More
Product Features:
- ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
- RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
- 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
- CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (based on the average miles driven per year of 15,000 miles)
- ULTIMATE LONGEVITY: No-hassle lifetime warranty on stock replacement K&N air filters- limitations apply
- EASY INSTALLATION: K&N Air Filters are pre-treated and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
- ECO-FRIENDLY: Using a washable, reusable engine air filter helps reduce replacement air filter waste- a K&N air filter is designed to last longer than 10 or more disposable filters
- MADE IN USA: K&N Air Filters are proudly made in the USA for trusted quality & reliability
Accel – High Energy Ignition Coil for GM HEI – 1973-1991 (Part No.140003)
from
$100.99
Engineered for higher energy output resulting in quicker starting, improved idle quality, crisper throttle response and more high RPM power. Compatible with both original HEI ignition systems and later model computer controlled HEI systems. No need to remove or re-time distributor. Complete with simplified ground strap, mounting screws, silicone coil gasket and carbon contact brush / spring.
Product Features:
See More
Product Features:
- 10-15% More Energy
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Highly Specialized Silicone Magnetic Steel Cores
- Standard Motor Products SMP Dr-31
- MSD 8225
Edelbrock – Performer Series Retainer (Qty 16) (Part No.9724)
from
$100.99
Product Features:
See More
- Use W/ Valve Springs Part #5822, 5882, 5896, 5872, 5867, 5812, 5857
- Set of 16
- 1.50 in. Outside Diameter
- Steel Material
- Black Oxide Finish
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1400)
from
$33.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
Competition Cams – Xtreme Energy 218/224 Hydraulic Flat Cam for Oldsmobile 260-455 (Part No.42-222-4)
from
$548.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,
Product Features:
See More
Product Features:
- Excellent performance in street carbureted applications.
- More vacuum allows an increase in duration for improved performance and assists power brakes.
- Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
- Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
Edelbrock – Performer Carburetor #9906 600 CFM With Electric Choke, Satin Finish (Non-EGR) (Part No.9906)
from
$397.99
Burnished aluminum. GM/MAC- style throttle linkage. Electric choke installed from factory. Easy tuning with 2 piece design. Smooth secondary transition. Both timed for full vacuum ports. Includes PCV outlet.
See More
Energy Suspension – Tie Rod Dust Boot (Part No.9.13102G)
from
$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Energy Suspension – Tie Rod Dust Boot (Part No.9.13101G)
from
$9.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Accel – Distributor Cap And Rotor Kit (Part No.8124)
Accel – Distributor Cap And Rotor Kit (Part No.8123)
Mr. Gasket – Alternator (Part No.5123)
from
$363.99
These Mr. Gasket chrome alternators are remanufactured to exceed original equipment specifications for maximum dependability.
Product Features:
See More
Product Features:
- Fits Most 1966-’72 GM Vehicles
- Bolt Spacing 6.6″
- 80 Amps
- GM 10DN Style Alternator
- Chrome Plated Finish
- includes V-Belt Pulley – 1-Groove
- Use w/ OEM Style Regulator
Mr. Gasket – Alternator (Part No.5122)
from
$288.99
These Mr. Gasket chrome alternators are remanufactured to exceed original equipment specifications for maximum dependability. This 10SI style 80 amp alternator can be used as an original equipment replacement OR as a 1-wire alternator.
Product Features:
See More
Product Features:
- Fits Most 1973-1983 GM Vehicles
- Bolt Spacing 6.6″
- 80 Amps
- GM 10SI Style Alternator
- Chrome Plated Finish
- 1-Groove V-belt pulley – included
- Internal Regulator
Accel – Adj:Vac Adv GM V8 Hei Dist (Part No.31035)
from
$48.49
This unit permits a seamless wide range of adjustment to both amount and rate of ignition advance. This unit helps increase horsepower and throttle response. It provides maximum spark advance while preventing detonation or “pinging”. This kit includes an allen wrench for easy adjustment along with instructions.
Product Features:
See More
Product Features:
- Adjustable Vacuum Advance
- Increases Horsepower And Throttle Response
- Includes Allen Wrench For Adjustments
- Instantly Increase Horsepower
- Maximum Possible Spark Advance
- Not Legal For Sale/Use In CA
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-1001)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2003)
from
$22.29
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
Mr. Gasket – Oil Pan Bolt Kit (Part No.6086)
from
$30.19
The special self locking oil pan bolts, use a smaller-than-standard hex head is ideal for tight spaces. Because of the hex flange head design, it will not fall back into the socket wrench, allowing for easier installation. Special under head serrations prevent loosening and the wide flange head distributes uniform clamping pressure for an ultra gasket seal. Bolts are zinc plated, grade 5.
Product Features:
See More
Product Features:
- Ideal For Tight Spaces
- Serrations Prevent Loosening
- Flange Distributes Pressure
- Zinc Plated Bolts
- Grade 5 Material
- Easy Installation
Mr. Gasket – Oil Pan Bolt Kit (Part No.6085)
from
$17.49
The special self locking oil pan bolts, use a smaller-than-standard hex head is ideal for tight spaces. Because of the hex flange head design, it will not fall back into the socket wrench, allowing for easier installation. Special under head serrations prevent loosening and the wide flange head distributes uniform clamping pressure for an ultra gasket seal. Bolts are zinc plated, grade 5.
Product Features:
See More
Product Features:
- Ideal For Tight Spaces
- Serrations Prevent Loosening
- Flange Distributes Pressure
- Zinc Plated Bolts
- Grade 5 Material
- Easy Installation
Spectre – Water Neck; Olds (Part No.4733)
from
$26.99
Spectre’s Oldsmobile V8 water neck fits Oldsmobile 330, 350, 425 and 455 engines. This water neck has been designed around the OEM specifications and has a chrome plated finish for a lasting look that fits great. This water neck has an additional by-pass hose connection and includes the bolts.
Product Features:
See More
Product Features:
- Fits Oldsmobile 330, 350, 425 and 455 engines
- Chrome plated
- Bolts included
- Designed for OEM fit
- Easy to install
- O-ring/gasket not included
Popular 1980 Oldsmobile Toronado Performance and Racing Products Categories
1980 Oldsmobile Toronado Performance and Racing Products
You count on your 1980 Oldsmobile Toronado to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 40 Performance and Racing Products ranging in price from $5.99 to $766.99, you’re sure to find everything you need for your 1980 Oldsmobile Toronado.
Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 12 different brands like K&N, Mr. Gasket, and Edelbrock. 1980 Oldsmobile Toronado Performance and Racing Products start as low as $5.99!
One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 758 extensive product reviews on 1980 Oldsmobile Toronado Performance and Racing Products. Some of the top-rated Performance and Racing Products products we carry are Unilite Ignition Module with 5.0 stars and Wire Set; Street Fire; Multi-Angle plug; HEI; Universal with 4.7 stars.
Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 1980 Oldsmobile Toronado below to get started!
Top-Rated Performance and Racing Products Brands For Your 1980 Oldsmobile Toronado
Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1980 Oldsmobile Toronado running right for years to come. In our inventory you’ll find brands like K&N, Mr. Gasket, Edelbrock, and even more.
Popular K&N Performance and Racing Products
You’ll find popular K&N brand products across Performance Air Filters and Performance Oil Filters. All are waiting to get your 1980 Oldsmobile Toronado back on the road. Some of the top-rated K&N products in these categories are:
from
$89.99
(14)
Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration
Performance Air Filters
from
$17.99
(49)
Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine
Performance Oil Filters
Top-Rated Edelbrock Performance and Racing Products
If Edelbrock are what you’re looking for, our inventory holds plenty. We stock Edelbrock brand Performance and Racing Products for your 1980 Oldsmobile Toronado, and some of our most reviewed Edelbrock parts include:
from
$428.99
(55)
Performer 1406 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet
Performance Carburetors
from
$394.99
(10)
Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet
Performance Carburetors
from
$397.99
(5)
Performer Carburetor #9906 600 CFM With Electric Choke, Satin Finish (Non-EGR)
Performance Carburetors
FAQs for 1980 Oldsmobile Toronado Performance and Racing Products
What are the most purchased Performance and Racing Products for the 1980 Oldsmobile Toronado?
Out of 40 Performance and Racing Products for the 1980 Oldsmobile Toronado, the most popular in our inventory are:
from
$26.99
(20)
High Performance 180 Degree Thermostat for Increased Flow
Performance Engine Coolant Thermostats
What are the top-rated 1980 Oldsmobile Toronado Performance and Racing Products?
Top-rated Performance and Racing Products for your 1980 Oldsmobile Toronado based on customer reviews/ratings are:
from
$85.29
(3)
Unilite Ignition Module
“I like the Unilite product because it is so small and compact compared to the HEI stuff I normally use. If you are restricted on space Its a great pro”
from
$48.49
(3)
Distributor Cap And Rotor Kit
“Nice set up from Accel. Good quality HD parts with the good brass terminals. HD rotor is beefier then most.”
