1980 Lincoln Mark VI Steering and Chassis Parts
More 1980 Lincoln Mark VI Steering and Chassis Parts Categories
If you’re looking for an original Steering and Chassis Parts replacement for a 1980 Lincoln Mark VI, you can search through our selection below. You’ll also find aftermarket and OEM Steering and Chassis Parts to meet your needs.
Essential 1980 Lincoln Mark VI Steering and Chassis Parts
Imperial – Quick Connect Coupler (Part No.240250)
from
$11.49
Imperial transmission line fitting kits allow for the installation of auxiliary cooler lines without cutting the vehicle’s original metal lines.
Product Features:
See More
Product Features:
- Quick Connect coupler
- Fits most 5/16″ transmission lines with 1/2″ – 20″ threads
- Simplifies transmission cooler installation
- Allows for auxiliary transmission cooler installation without cutting OE lines
Carquest Premium – TIE ROD END (Part No.310-65673)
from
$44.99
Product Features:
See More
- OE matched design for Form, Fit, and Function
- Advanced corrosion-resistant electro-coating to reduce rust
- Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
- Hex formed studs &/or wrench flats for ease of installation
- Hardware included for easier installation (where applicable)
Lares – Remanufactured Power Steering Gear Box (Part No.1232)
from
$173.99
Power Steering Gears are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More
Rare Parts – Pitman Arm (Part No.RP20452)
from
$50.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Improves steering response
- Reduces wander
- Reduces vibration
- Restores OE alignment
Powercraft – Steering Gear Input Shaft Seal Kit (Part No.8520)
from
$29.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Driveworks – Tie Rod Adjusting Sleeve (Part No.DW-ES2058S)
from
$15.49
Driveworks Brand tie rod adjusting sleeves are high-quality, cost-effective parts. Replace tie rod adjusting sleeve to help eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts promote improved steering response and du
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Performance tested to ensure durability
- Forged micro-alloy steel construction for strength and durability
Powercraft – Pump Seal Kit (Part No.8526)
from
$13.79
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Cardone – Power Steering Filter (Part No.20-0012F)
from
$41.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
MOOG – Ball Joint (Part No.K8310)
from
$103.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Rare Parts – Ball Joint (Part No.RP10227)
from
$28.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Heat treated components
- Dust seal to prevent contamination
- Restores vehicle handling
- Restores OE alignment
Lares – New Steering Coupling Assembly (Part No.204)
from
$48.99
New Rag Joint steering couplers are carefully engineered to OE specifications. All units are complete with lower casting, rubber disk and mounting bolts already assembled for easy, trouble free installation. All units are carefully packaged to insure safe arrival at your door
See More
Carquest Premium – Return Hose Assembly (Part No.36353)
from
$87.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Dorman – Suspension Control Arm (Part No.524-160)
from
$295.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
MOOG – Stabilizer Bar Bushing Kit (Part No.K80093)
from
$14.49
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Made from high-quality thermoplastic material for durability and ride performance
- EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Inner sleeve is phosphate coated for corrosion protection
Carquest Premium – Pressure Hose Assembly (Part No.35459)
from
$31.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Powercraft – Steering Gear Major Seal Kit (Part No.8897)
from
$66.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
National – Multi Purpose Seal (Part No.8773S)
from
$9.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Driveworks – Idler Arm Bushing (Part No.DW-K8103B)
from
$11.49
Idler Arm Bushing
Powercraft – Steering Gear Lower Pitman Shaft Seal Kit (Part No.8779)
from
$20.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Powercraft – Steering Gear Complete Rebuild Kit (Part No.8896)
from
$145.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Cardone – Power Steering Pump (Part No.20-6238)
from
$77.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Product Features:
See More
Product Features:
- All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
- All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
- Units are supplied with 100% tested and calibrated pressure relief valves.
- Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Dorman – Help – Power Steering Caps – Power Steering Sealing Washer Assortment (Part No.82540)
from
$4.49
This power steering pump washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this power steering pump washer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
MOOG – Stabilizer Bar Bushing Kit (Part No.K80094)
from
$14.79
MOOG® Problem Solver® products incorporate proven design and engineering features for like new steering ease of installation and longer life. MOOG is the preferred steering and suspension brand of professional technicians and NASCAR crew chiefs.
Product Features:
See More
Product Features:
- Split design allows for easier installation
- Replacement can reduce front end noise
- Restores like-new steering and handling
- Bushings are engineered to provide long life and dependability
- Incorporates proven design and engineering features
- Inner sleeve is phosphate coated for corrosion protection
MOOG – Stabilizer Bar Link Kit (Part No.K8266)
from
$12.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Improves upon OE designs
- Quiet, dependable operation
- Provides like-new steering, ease of installation and longer life
- Incorporates proven design and engineering features
- Incorporates proven design and engineering features
Powercraft – Pump Drive Shaft Seal Kit (Part No.8711)
from
$7.79
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Dorman – Power Steering Reservoir: Black, Plastic, Original Equipment Replacement (Part No.603-900)
from
$33.99
This replacement power steering fluid reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is thoroughly tested to ensure optimum fit on specific vehicle applications.
Product Features:
See More
Product Features:
- Direct replacement – this power steering fluid reservoir fits and functions like original equipment for a trouble-free installation
- Complete assembly – includes reservoir and reservoir cap
- Reliable performance – built to withstand excessive heat and vibration
- Quality tested – this part has undergone on-vehicle testing to ensure a quality fit and long service life
Carquest Premium – Bulk – 3/8" ID Return Hose (CPE) (sold by each) (Part No.34995)
from
$2.49
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Driveworks – Steering Tie Rod End (Part No.DW-ES3494)
from
$18.99
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Performance tested to ensure durability
- Forged micro-alloy steel construction for strength and durability
- A slotted nut and cotter pin for a more secure installation
Popular 1980 Lincoln Mark VI Steering and Chassis Parts Categories
1980 Lincoln Mark VI Steering and Chassis Parts
You count on your 1980 Lincoln Mark VI to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 75 Steering and Chassis Parts ranging in price from $2.49 to $295.99, you’re sure to find everything you need for your 1980 Lincoln Mark VI.
Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 13 different brands like Imperial, Carquest Premium, and DriveWorks. 1980 Lincoln Mark VI Steering and Chassis Parts start as low as $2.49!
One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 904 extensive product reviews on 1980 Lincoln Mark VI Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Idler Arm with 4.3 stars and Steering Tie Rod End with 4.7 stars.
Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1980 Lincoln Mark VI below to get started!
Top-Rated Steering and Chassis Parts Brands For Your 1980 Lincoln Mark VI
Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1980 Lincoln Mark VI running right for years to come. In our inventory you’ll find brands like Imperial, Carquest Premium, DriveWorks, and even more.
Popular National Steering and Chassis Parts
You’ll find popular National brand products across Steering Knuckles. All are waiting to get your 1980 Lincoln Mark VI back on the road. Some of the top-rated National products in these categories are:
Top-Rated Imperial Steering and Chassis Parts
If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Steering and Chassis Parts for your 1980 Lincoln Mark VI, and some of our most reviewed Imperial parts include:
FAQs for 1980 Lincoln Mark VI Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the 1980 Lincoln Mark VI?
Out of 75 Steering and Chassis Parts for the 1980 Lincoln Mark VI, the most popular in our inventory are:
from
$5.99
This product is not rated
Bulk – 3/8" I.D. Return Hose (J189) (sold by foot)
Power Steering Return Hoses
What are the top-rated 1980 Lincoln Mark VI Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your 1980 Lincoln Mark VI based on customer reviews/ratings are:
from
$18.49
(18)
Steering Tie Rod End
“Installed these today, 2 inners and 2 outers all driveworks brand. Went on no problems, all hardware included and fit properly. Wish they were angled ”
