1980 Jeep CJ5 Performance and Racing Products

Essential 1980 Jeep CJ5 Performance and Racing Products

Omix – Distributor Cap (Part No.17244.15)

Distributor Cap

from

$20.49
Is your Jeep running rough? Over time ignition parts will deteriorate. It’s easier to replace them now than to have a roadside breakdown in the future. Order high quality ignition parts from Omix-ADA to get your Jeep running smooth again.

Product Features:
  • For 5.0L
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Valve Cover (Part No.17401.03)

Valve Cover

from

$95.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty. For use with studded rocker bridges only, unless purchasing (2) 17402.08 and (2) 17408.12.

Product Features:
  • Plastic
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Timing Chain (Part No.17453.08)

Timing Chain

from

$39.49
Timing chains stretch over time. If left untouched, they can begin jumping teeth on the camshaft and crankshaft sprockets. This will change your timing and will do major damage to your Jeep’s engine. It is recommended that you change the timing chain and

Product Features:
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Distributor (Part No.17239.08)

Distributor

from

$369.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • For 226CI
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Clutch Fork (Part No.16914.06)

Clutch Fork

from

$33.49
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Steel
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Exhaust Tailpipe (Part No.17615.02)

Exhaust Tailpipe

from

$177.99
Is your Jeep’s exhaust pipe bent or rusted out? Trying to pass your annual state Inspection or restore your Jeep back to stock? Omix-ADA offers high quality exhaust pipes, gaskets, and hangers to keep you on the road and trail.

Product Features:
  • Aluminized Steel
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Starter Motor (Part No.17227.03)

Starter Motor

from

$363.99
Starters eventually wear out over time. Does your starter spin quickly without starting the engine or make a rapid clicking noise? If so, Omix-ADA offers this direct OE replacement starter to get your motor running.

Product Features:
  • 12 Volt
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Rocker Arm Kit (Part No.17411.05)

Rocker Arm Kit

from

$48.49
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Includes 2 Arms; 2 Pivots And 1 Bridge
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Exhaust Manifold (Part No.17624.06)

Exhaust Manifold

from

$261.99
Are you smelling exhaust in your Jeep? Can you hear an exhaust leak? If so, you may have a cracked exhaust manifold. Omix-ADA offers high quality exhaust manifolds and gaskets to solve the problem.

Product Features:
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – In-Line Fuel Filter Kit (Part No.17718.02)

In-Line Fuel Filter Kit

from

$8.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty. Fuel Filter Kit Inline Dual Outlet, Includes: Filter, Clamp and Hoses,72-83 CJ5 3.8L and 4.2L,72-75 CJ6 3.8L and

Product Features:
  • Inline
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Starter Solenoid (Part No.17230.02)

Starter Solenoid

from

$29.49
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Solenoid Only
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Energy Suspension – Transmission Torque Arm Grommet (Part No.2.1101G)

Transmission Torque Arm Grommet

from

$8.99
Product Features:
  • Transmission Torque Arm Grommet
See More

Rugged Ridge – Heavy Duty Differential Cover (Part No.16595.30)

Heavy Duty Differential Cover

from

$271.99
Made from either 3/8 inch cast steel or 5/16 inch stamped steel, these heavy-duty covers are designed to protect your differential and all its working parts for as long as you own your vehicle.

Product Features:
  • Cast Steel
  • Black Finish
See More

K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.E-1080)

Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration

from

$89.99
K&N performance High-Flow Air Filters are engineered to improve engine performance. Unlike disposable paper filters which must be frequently replaced, K&N Air Filters are washable, reusable, and engineered to last for the life of your vehicle or outdoor power small engine. Engineered to fit easily into your factory air box, installation can be completed in a matter of minutes! K&N develops and tests each product on the world┐s toughest race tracks, so we can bring the highest level of performance to your daily driving. Join the millions of customers who have saved money and improved vehicle performance by upgrading to K&N filtration.

Product Features:
  • ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
  • RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
  • 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
  • CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (based on the average miles driven per year of 15,000 miles)
  • ULTIMATE LONGEVITY: No-hassle lifetime warranty on stock replacement K&N air filters- limitations apply
  • EASY INSTALLATION: K&N Air Filters are pre-treated and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
  • ECO-FRIENDLY: Using a washable, reusable engine air filter helps reduce replacement air filter waste- a K&N air filter is designed to last longer than 10 or more disposable filters
  • MADE IN USA: K&N Air Filters are proudly made in the USA for trusted quality & reliability
See More

Mr. Gasket – High Performance Thermostat (Part No.4365)

High Performance Thermostat

from

$27.49
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:
  • Opens At 195 Degrees
  • Designed to Resist Large Variations of Coolant Pressure at High RPM
  • Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
  • For High Performance Street, Drag Race, and Oval Track
  • Copper & Brass Construction – Resists Corrosion
  • High Flow
See More

Omix – Oil Pan (Part No.17437.01)

Oil Pan

from

$264.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Steel
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Thermostat Gasket (Part No.17117.03)

Thermostat Gasket

from

$3.49
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • OE Style
  • Direct Fit
  • Highly Durable
  • Long Lasting
  • Limited 5 Year Warranty
See More

Omix – Piston Ring Set (Part No.17430.21)

Piston Ring Set

from

$111.99
Are you rebuilding an engine and need a fresh set of piston rings? Omix-ADA offers high-quality replacement piston ring sets from Standard to .080 thousandths over size. They will give you years of service and get you back on the road.

Product Features:
  • .030 Over
  • Engine Work May Be Required To Install This Part
  • Limited 5 Year Warranty
See More

Energy Suspension – Body Cab Mount Set (Part No.2.4106R)

Body Cab Mount Set

from

$57.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:
  • Assures Longer Lasting Cab to Bed Alignment
  • Replace to Restore Ride Height
  • Gain Durability
  • Stronger Than Original Rubber Mounts
See More

Omix – Axle Differential Cup (Part No.16536.18)

Axle Differential Cup

from

$14.79
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Accel – Distributor Cap And Rotor Kit (Part No.8220)

Distributor Cap And Rotor Kit

from

$64.99


Product Features:
  • Heavy Duty Cap and Rotor Kit
  • With Brass Inserts
See More

Omix – Pilot Bushing (Part No.16910.09)

Pilot Bushing

from

$5.29
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Metal
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Mallory – Unilite Ignition Module (Part No.605)

Unilite Ignition Module

from

$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:
  • Service Part
  • No Moving Parts To Wear Out
  • Self Contained Unit
  • Can Drive OEM
  • Can Drive High Performance Ignition Coils
See More

Rugged Ridge – Drop Pitman Arm (Part No.18006.51)

Drop Pitman Arm

from

$142.99
This drop pitman arm helps reduce the angle of your drag link and reduce bumpsteer created when a suspension lift is installed.

Product Features:
  • Steel
  • Prevents Steering Bind
  • Reduce The Angle of Your Drag Link
  • Reduce Bump Steer
  • Limited 5 Year Warranty
See More

Omix – Oil Cap (Part No.17403.01)

Oil Cap

from

$5.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Metal Top With Rubber Gasket
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Edelbrock – Performer EGR AMC Intake Manifold (Part No.3731)

Performer EGR AMC Intake Manifold

from

$484.99


Product Features:
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 deg. Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • 50-State Street Legal if Correct Carburetor Used
See More

K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-1001)

Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

from

$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

Product Features:
  • HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
  • VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
  • PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
  • EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
  • EASY TO REMOVE: Fast and easy Wrench-Off removal
  • HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
  • HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
See More

Energy Suspension – Motor Mount (Part No.2.1102R)

Motor Mount

from

$45.99
A true performance application component for cars, trucks, hot rods and racing/competition vehicles – yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged for racing use. When required- a torque resistant safety interlock design is used that is comparable in strength to those too hard-running metal mounts. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal motor mounts. The popular early style mounts for General Motors vehicles are available in either zinc or chrome metal finishes. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluids such as: oils, coolants, road contaminants, etc.

Product Features:
  • Gains Both Performance and Longevity
  • Will Handle Any and All Torque
  • Out Lasts Rubber
See More

Popular 1980 Jeep CJ5 Performance and Racing Products Categories

1980 Jeep CJ5 Performance and Racing Products

You count on your 1980 Jeep CJ5 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 107 Performance and Racing Products ranging in price from $1.49 to $879.99, you’re sure to find everything you need for your 1980 Jeep CJ5.

Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 18 different brands like K&N, Accel, and Mr. Gasket. 1980 Jeep CJ5 Performance and Racing Products start as low as $1.49!

One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 328 extensive product reviews on 1980 Jeep CJ5 Performance and Racing Products. Some of the top-rated Performance and Racing Products products we carry are Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration with 5.0 stars and Unilite Ignition Module with 5.0 stars.

Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 1980 Jeep CJ5 below to get started!

Top-Rated Performance and Racing Products Brands For Your 1980 Jeep CJ5

Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1980 Jeep CJ5 running right for years to come. In our inventory you’ll find brands like K&N, Accel, Mr. Gasket, and even more.

Popular Competition Cams Performance and Racing Products

You’ll find popular Competition Cams brand products across Performance Engines. All are waiting to get your 1980 Jeep CJ5 back on the road. Some of the top-rated Competition Cams products in these categories are:
VALVE SEALS, TEFLON 3/8" 1 ST
from $31.99
(1)
VALVE SEALS, TEFLON 3/8" 1 ST
Performance Engine Valve Stem Seal Sets

FAQs for 1980 Jeep CJ5 Performance and Racing Products

What are the most purchased Performance and Racing Products for the 1980 Jeep CJ5?

Out of 107 Performance and Racing Products for the 1980 Jeep CJ5, the most popular in our inventory are:
High Performance 180 Degree Thermostat for Increased Flow
from $26.99
(20)
High Performance 180 Degree Thermostat for Increased Flow
Performance Engine Coolant Thermostats

What are the top-rated 1980 Jeep CJ5 Performance and Racing Products?

Top-rated Performance and Racing Products for your 1980 Jeep CJ5 based on customer reviews/ratings are:
Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration
from $102.99
(5)
Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration
“Seeing the commercials on the speed channel got me thinking about my 1996 Dodge Dakota 4×4 with V-6, with a lot of miles. Needed a boost of power and”
Unilite Ignition Module
from $85.29
(3)
Unilite Ignition Module
“I like the Unilite product because it is so small and compact compared to the HEI stuff I normally use. If you are restricted on space Its a great pro”
Tie Rod Dust Boot
from $9.99
(3)
Tie Rod Dust Boot
“Replaced the old torn boot and added a bit of color for a low cost.”