1980 Ford Mustang Transmission Parts

Below you will find various in-demand Ford Transmission Parts, components and accessories for your 1980 Mustang. Advance Auto Parts has popular Mustang parts like Transmission Bearings, Transmission Seals, Transmission Mounts and more. You’ll also find aftermarket and OEM Transmission Parts for other Mustang model years including 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 and more. Select a category of 1980 Ford Mustang Transmission Parts below and start saving instantly.

Popular 1980 Ford Mustang Transmission Parts Categories

Gear Shift Levers

Automatic Transmission Shift Linkage Bushings

Transmission Torque Converters

OE Transmission Coolers

Gear Shift Rod Bushings

Transmission Oil Cooler Lines

Countershaft Bearings

Manual Transmission Output Shaft Bearings

Back Up Lamp Switches

Transmission Pan Gaskets

Automatic Transmission Line Connectors

Pinion Bearings

Transmission Mounts

Transmission Oil Pans

Transmission Master Repair Kits

Back Up and Neutral Safety Switches

Transmission Rebuild Kits

Transmission Oil Pan Gaskets

Transmission Bushings

Automatic Transmission Control Shaft Seals

Main Shaft Bearings

Automatic Transmission Oil Pump Seals

Transmission Modulator Valves

Pinion Seals

Automatic Transmission Dipstick Seals

Transmission Seals and O-rings

Torque Converter Seals

Extension Housing Seals

Manual Transmission Output Shaft Seals

Shaft Seals

Transmission Gasket Sets

Transmission Crossmembers

Transmission Shift Kits

Input Shaft Bearings

Transmission Bands

Automatic Transmission Flexplate Mounting Bolts

Automatic Transmission Output Shaft Bearings

Shift Shaft Seals

Automatic Transmission Fluid Filler Tube Seals

Drive Sprocket Bearings

Manual Transmission Countershaft Bearing Set

Essential Transmission Parts for 1980 Ford Mustangs

from

$11.99

AT OIL PAN GASKET

from

$5.49

These replacement automatic transmission shift lever control rod bushings have been made to match the function and performance of the original bushings on select vehicle years, makes and models.

Product Features:

Direct replacement – these replacement auto trans shift lever control rod bushings match the original equipment design on specified vehicles
Conveniently fix- simple solution to address worn bushings and restore original performance and feel
Application specific – reverse engineered from the original design on certain vehicle years, makes and models
Trustworthy quality – backed by team of engineers and quality specialists in the United States

from

$7.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$2.99

AT DPSTK TUBE SEAL

from

$13.99

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$14.99

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$39.99

This replacement transmission oil pan is a direct replacement for a damaged original equipment transmission pan. Made of quality materials, it’s designed for reliable, leak-free service. Every Dorman part is backed by over 100 years of experience, along with a dedicated team of product experts, automotive engineers and technical support specialists based in the United States. We are passionate about giving repair professionals and vehicle owners greater freedom to fix cars and trucks, which is why we have more than 100,000 parts in our catalog today and promise to never stop driving new solutions.

Product Features:

Ideal replacement – this transmission oil pan matches the fit and function of the original pan for a trouble-free replacement
Durable construction – this transmission oil pan is made of quality materials for durability and leak-free performance
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on testing to ensure a quality fit

from

$516.99

The B&M Megashifter has it all, form, function and classic style. This all adds up to bring you a quality shifter that’s been one of the most popular automatic shifters of all time. The light truck Megashifter is better suited for truck and bench seat app

Product Features:

Universal Floor Mount Application
Cable Operated
Quick Installation
Accurate Shifting
NHRA/IHRA Reverse Lockout Meets Requirements

from

$165.99

Remanufactured using industry-leading techniques to assure enhanced torque performance and extended life. Each unit is harmonically balanced and leak tested with any inherent OE weaknesses corrected. Pro-King torque converters are subject to random ISO 9001 quality tests before leaving the factory.

Product Features:

Fluid Balanced

from

$20.99

AT OIL PUMP SEAL

from

$6.99

AT CONTR SHAFT SEAL

from

$3.99

AT SOLENOID SEAL

from

$14.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$77.99

AUTOMATIC TRANS PART

from

$40.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 5″ x 12-1/2″
Sub-compact to compact cars
GVWR up to 12,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$259.99

One of the most complete rebuild kits in the automatic transmission industry today. Each Rebuild Kit contains only the highest quality parts that meet or exceed OE specifications.

Product Features:

Include steels, frictions, gaskets, and filter
Includes Band and Modulator (if applicable)

from

$14.49

Design type: spring loaded; single-lip
Temperature range: -80 Deg. F to 350 Deg. F / -62 Deg. C to 176 Deg. C
Good dry heat resistance
Excellent low temperature capability
Delivers quality and reliable performance for every type of repair

from

$16.99

A/T FLYWHEEL BOLT

from

$199.99

Shift Improver Kit – 1992 to 1995 Ford, Lincoln, Mercury AODE/4R70W Application: 1992 to 1995 Ford, Lincoln, Mercury AODE/4R70W Recalibrate your automatic transmission for optimum performance and extended life! Provides crisp shifts on any stock automatic transmissions. Elimination of soft sluggish shifts, shift overlap, and excess wear on clutches and bands due to slippage. Improves transmission life. Transmission removal not required. The B&M Shift Improver Kit the easiest way to get the stout performance you’ve always wanted out of your automatic transmission – and you get two modes of performance to select from: Heavy Duty, or Street/Strip. It’s our least expensive and simplest to install kit. All you need are a few dollars and some hand tools! In the space of an afternoon, you can turn your transmission into a B&M-tuned unit! Just ask the thousands of satisfied customers that have installed one in their transmissions! Stage 1 – Heavy Duty Firm positive shifts without loss of driver comfort for improved performance in all street vehicles. Recommended for regular passenger vehicles. Stage 2 – Street/Strip Provides very positive shifts for high performance street use or for competitive events. This model is for the enthusiast who wants the hardest, quickest possible shift.

Product Features:

Provides Crisp Shifts
On Any Stock Automatic Transmission
Eliminates Soft/Sluggish Shift
Eliminates Shift Overlap
Eliminate Clutch and Band Wear

from

$27.49

Fully adjustable vacuum modulator to maintain accurate shift points.

Product Features:

Meets or exceeds OE fit, form and function

from

$10.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$8.79

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$25.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission cooler reinstallation kit
Contains part numbers 248001, 226201, 240250 and 4 hose clamps
Provides all hardware for reinstallation of Imperial transmission coolers
Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
Made of high grade nylon for easy installation
Removable buttons for cooler/fan relocation
Made for both transmission coolers and electric fan installation
Comes with Quick Connect coupler

from

$27.99

AUTO TRANS BAND

from

$4.99

Product Features:

Brand may vary by location

from

$30.99

Made from Hyper-Flex polyurethane.

Product Features:

Made from HYPER-Flex Polyurethane

from

$84.99

The transmission gear position sensor reports the location of the gear selector to the transmission or powertrain control module. The sensor input is used for back-up light illumination, transmission function as well as engine operating characteristics based on the position chosen.

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$108.99

The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.

Product Features:

Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck.
Motorcraft and Ford Parts are manufactured from first-quality materials – chosen specifically for maximum performance and application suitability.
As with all Motorcraft and Ford Parts, any innovations or improvements developed since the vehicle’s manufacture are included in these after market replacement parts, ensuring the most current technology and performance.

Upgrade your 1980 Ford Mustang with Top-Quality Transmission Parts

When it comes to maintaining or upgrading your 1980 Ford Mustang, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Transmission Parts are key to keeping your Mustang functioning at its best. At Advance Auto Parts, we offer a wide selection of 90 Transmission Parts for the 1980 Ford Mustang, designed to meet your needs without breaking the bank. From Transmission Bearing replacements to Transmission Seals upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Transmission Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Transmission Parts for your 1980 Ford Mustang at great prices. Our Transmission Parts inventory for this model ranges from just $2.99 to $1,099.99, with an average price of $164.23. Our 90 Transmission Parts in stock come from 16 trusted brands, so you’re sure to find the right part for your 1980 Ford Mustang without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1980 Ford Mustang, we stock popular OEM and aftermarket Transmission Parts from top names like National, Imperial, B & M, and more. National Transmission Parts start at just $14.99 and boast an impressive 4.3 stars average rating from customers. Imperial and B & M also bring quality to the table, with Transmission Parts available starting at $61.99, and at an average 4.1 stars rating. With 2,229 customer reviews and counting, our 1980 Ford Mustang Transmission Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Transmission Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1980 Ford Mustang is always ready to roll. We’re committed to providing you with everything you need to keep your Mustang in top shape, all in one place. Start shopping confidently below for your 1980 Ford Mustang!

Best-Selling Transmission Bearings for 1980 Ford Mustangs

Enhance the driving experience in your Ford with 9 quality Transmission Bearing components, starting at $8.79.

show more show less

from

$14.99

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$15.99

Product Features:

CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION: Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$15.29

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN — Engineered to meet OE specifications
COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$15.99

Product Features:

CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION: Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$23.99

Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$8.79

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$15.99

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$33.99

Product Features:

BUILT TO LAST: Advanced heat treatment process for strength
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$11.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

RIGHT TYPE — Needle bearings are application-specific for the repair occasion, using either caged or full complement designs
PREMIUM MATERIALS — Precision manufactured using high-quality materials for outstanding durability and performance
OE-STYLE DESIGN — Engineered to meet OE specifications
COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on

Most Popular 1980 Ford Mustang Transmission Seals

Customize your Ford with 14 Transmission Seals products like Pinion Seals, Transmission Seals and O-rings, and Manual Transmission Output Shaft Seals, all priced under $30.49.

show more show less

from

$13.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$30.49

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$9.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$11.99

Design type: spring loaded; single-lip
Temperature range: -80 Deg. F to 350 Deg. F / -62 Deg. C to 176 Deg. C
Good dry heat resistance
Excellent low temperature capability
Delivers quality and reliable performance for every type of repair

from

$13.29

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$4.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$20.49

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$6.99

AT CONTR SHAFT SEAL

from

$6.99

Design type: spring loaded; single-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$2.99

AT DPSTK TUBE SEAL

from

$12.29

AT EXT HOUSING SEAL

from

$10.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$8.79

Design type: springless; single-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$5.99

Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

Top Picks for 1980 Ford Mustang Transmission Mounts

Upgrade Ford Mustangs with top-quality Transmission Mounts parts, including 2 OEM and aftermarket selections for your 1980 model.

show more show less

from

$54.99

A true performance application component for cars, trucks, hot rods, racing/competition, yet popularly used for street vehicles when more horsepower is added. Soft running enough to absorb vibrations for street use yet rugged for racing use. Helps control torque on high performance vehicles. Maintains proper drive shaft angle to help prevent early wear and unexpected power train damage. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal transmission mounts. Resistant to under vehicle fluid oils, coolants and road contaminants. Made of Energy’s Hyper-Flex performance polyurethane and heavy duty hardware – for added durability.

Product Features:

Unique Safety Interlock Design
Impervious to Vehicle Oils and Chemicals
Strong Enough Too Handle High Performance

from

$9.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to FORD 74-93; MERCURY 80-88;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1974-1993
Weight approx: 2 Lbs
MOUNT HOLES ON CENTER: 5.56 INCH/141.22 MM
STUDS ON CENTER: 2.18 INCH/55.37 MM
HEIGHT: 2.80 INCH/71.12 MM
STUD THREAD: 3/8 – 16

In-Demand Automatic Transmission Parts for 1980 Ford Mustangs

Select from 13 premium Automatic Transmission Parts parts for your 1980 Ford Mustang, with prices ranging from $3.99 to $96.99.

show more show less

from

$3.99

AT SOLENOID SEAL

from

$38.99

ATP Automatic Transmission Modulator Valve

from

$10.99

This brake pedal bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this brake pedal bushing matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$8.99

AT SHF LINK BUSHING

from

$38.99

Fully adjustable vacuum modulator to maintain accurate shift points.

Product Features:

Meets or exceeds OE fit, form and function

from

$30.99

Made from Hyper-Flex polyurethane.

Product Features:

Made from HYPER-Flex Polyurethane

from

$30.99

Made from Hyper-Flex polyurethane.

Product Features:

Made from HYPER-Flex Polyurethane

from

$96.99

AUTO TRANS BAND

from

$94.99

AUTO TRANS BAND

from

$33.49

The transmission modulator valve is a vacuum operated mechanical device located on the transmission case. This valve will have a actuator rod extended into the transmission valve body inside the transmission which will control the flow of transmission fluid within the transmission to place the transmission in the most optimal forward gear selection.

Product Features:

Application matched component ensures the transmission gear position system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
This part will look and function just like the original unit being replaced.

from

$32.49

Application matched component ensures the transmission gear position system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
This part will look and function just like the original unit being replaced.

from

$30.99

Application matched component ensures the transmission gear position system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
This part will look and function just like the original unit being replaced.

from

$27.99

AUTO TRANS BAND

Most Sold 1980 Ford Mustang Transmission Cooler and Parts

Explore our best-selling Ford parts for the 1980 Mustang among 10 OEM and aftermarket options starting from $25.99.

show more show less

from

$85.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$73.99

Product Features:

Imperial Maxi-Cool« plate and fin transmission cooler
Size: 3/4″ x 11″ x 7-1/2″
Mid-size and full-size cars, pickups
GVWR up to 20,000 lbs.; towing up to 2,500 lbs.
Compatible with OEM cooler systems
Made with the highest quality materials
100% pressure testing to 150 PSI for quality assurance
33% more efficient than a comparable tube and fin design

from

$61.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Rapid-Cool plate and fin transmission cooler
Size: 3/4″ x 11″ x 6″
Sub-compact to compact cars
GVWR up to 18,000 lbs.
Compatible with OEM cooler systems
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$55.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 5″ x 15-7/8″
Compact and mid-size cars
GVWR up to 16,000 lbs.; towing up to 2,500 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$40.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 5″ x 12-1/2″
Sub-compact to compact cars
GVWR up to 12,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$80.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Rapid-Cool plate and fin transmission cooler
Size: 3/4″ x 11″ x 9-1/2″
Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
33% more efficient than a comparable tube and fin design
Compatible with OEM cooler systems
Made with the highest quality materials
100% pressure testing to 150 PSI for quality assurance
33% more efficient than a comparable tube and fin design

from

$52.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Mid-size and full-size cars, pickups
GVWR up to 18,000 lbs.; towing up to 3,500 lbs
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$83.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
Up to Class C motorhomes, towing up to 5,000 pounds
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$25.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission cooler reinstallation kit
Contains part numbers 248001, 226201, 240250 and 4 hose clamps
Provides all hardware for reinstallation of Imperial transmission coolers
Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
Made of high grade nylon for easy installation
Removable buttons for cooler/fan relocation
Made for both transmission coolers and electric fan installation
Comes with Quick Connect coupler

from

$67.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 12-1/2″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

Top-Rated Transmission Parts Brands For Your 1980 Ford Mustang

Shop for the best-rated brands offering Transmission Parts and other products for your 1980 Ford Mustangs. Below you’ll find some of our best rated Transmission Parts from National, Imperial, and B & M, and more. Transmission Parts from these brands that fit a 1980 Mustang start at just $14.99 and are rated as high as 4.3 stars. OEM and aftermarket Transmission Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular National 1980 Ford Mustang Transmission Parts

When it comes to maintaining or upgrading your 1980 Ford Mustang, using quality Transmission Parts is essential to ensure durability and a perfect fit. National ticks all of those boxes. We offer a wide selection of National Transmission Parts, specifically designed for the 1980 Ford Mustang. With over 3 National brand Transmission Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $14.99, with an average price of just $20.82. Plus, with over 29 customer reviews and an average rating of 4.3 stars, you can trust that our National Transmission Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $30.49

(1)

Shaft Repair Sleeve

“Perfect Fit. Product was exactly as described”

from $16.99

(25)

Multi-Purpose Bearing

“Smooth”

from $14.99

(3)

Bearing Race

“Used on my diesel truck”

Popular Imperial 1980 Ford Mustang Transmission Parts

Imperial auto parts is one of the highest quality Transmission Part brands in the market. Any 1980 Ford Mustang owner should feel confident when installing genuine Imperial parts in their vehicle. To ensure the best fit and performance for your 1980 Mustang, Advance Auto Parts carries a full inventory of 3 Imperial Transmission Parts. Plus you will be keeping your Ford in peak condition while saving money because prices on these Imperial Transmission Parts range from $61.99 to $85.99, plus, with more than 14 customer reviews and an impressive 4.1 stars average rating, you can be confident the Fram Transmission Parts below will deliver on both quality and value.

from $61.99

(3)

Plate and Fin Style Transmission Cooler, Light Duty, 3/4" x 5-7/8" x 11"

“Bought these before for my vehicles. Put this one on a Silhouette and by-passed the in-radiator cooler altogether. Haven’t put a thermometer on it t”

from $73.99

(7)

Maxi-Kool® XL Transmission Oil Cooler

“this transmission oil cooler is replacing my one on my 2000 dodge dakota its priced right mid size and easy to put in the ome one is 250 this is 60 an”

from $85.99

(4)

High Performance Transmission Oil Cooler

“good quality,easy to install.”

FAQs for 1980 Ford Mustang Transmission Parts

Which Transmission Parts are best-sellers for 1980 Ford Mustangs?

Out of 90 Transmission Parts that fit 1980 Ford Mustangs, the following parts are the top sellers:

High Performance Transmission Oil Cooler (3670013) – $83.99
Econo-Kool Transmission Oil Cooler (6015018) – $55.99
Econo-Kool Transmission Oil Cooler (6014720) – $40.99

What’s the price range for 1980 Ford Mustang Transmission Parts?

Transmission Part prices for the 1980 Ford Mustang start at $2.99 and go up to $1,099.99 for the most premium parts.

What’s the average price of a Transmission Part for a 1980 Ford Mustang?

The average price for Transmission Parts for the 1980 Ford Mustang is $164.23. Keep in mind the variety of part types within our Transmission Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Transmission Parts for other Ford Mustang model years?

Yes, we currently carry Transmission Parts for 55 model years of Ford Mustangs between 1964 and 2025. Transmission Parts are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Transmission Parts for my 1980 Ford Mustang?

The cheapest 1980 Ford Mustang Transmission Parts we carry in stock are:

AT DPSTK TUBE SEAL (11236112) – $2.99
AT SOLENOID SEAL (11239035) – $3.99
Oil Seal (5440602) – $4.99
Automatic Shifter Bushing – O.D. 0.525 In.; I.D. 0.240 In.; Length 0.490 In. (22149556) – $5.49
Pinion Seal (10751118) – $5.99

What are the top-rated Transmission Parts that fit the 1980 Ford Mustang?

Out of 2,229 reviews by customers, our 1980 Ford Mustang Transmission Parts have an average customer rating of . These are some of the highest-rated Transmission Part types for the 1980 Ford Mustang and their top-rated products:

Transmission Cooler and Parts
- Plate and Fin Style Transmission Cooler, Light Duty, 3/4" x 5-7/8" x 11" (20230023) – $61.99
- Maxi-Kool® XL Transmission Oil Cooler (12031443) – $73.99
- High Performance Transmission Oil Cooler (15230020) – $85.99
Automatic Transmission Pan and Gaskets
- Plate and Fin Style Transmission Cooler, Light Duty, 3/4" x 5-7/8" x 11" (20230023) – $61.99
- Maxi-Kool® XL Transmission Oil Cooler (12031443) – $73.99
- High Performance Transmission Oil Cooler (15230020) – $85.99

What types of Transmission Parts do you sell for my 1980 Ford Mustang?

As of 11/2/25, these are some of the most in-demand types of Transmission Parts for a 1980 Ford Mustang:

Can I get help with 1980 Ford Mustang Transmission Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Transmission Parts and more.

What is your return policy for Ford Mustang Transmission Parts?

Advance Auto Parts keeps returns simple. For new Ford Mustang Transmission Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1980 Ford Mustang Transmission Parts

ATP – AT OIL PAN GASKET (Part No.FG-126)

Dorman – Help – Automatic Shifter Bushing – O.D. 0.525 In.; I.D. 0.240 In.; Length 0.490 In. (Part No.74040)

Driveworks – Taper Bearing Set (Part No.S-A-16)

ATP – AT DPSTK TUBE SEAL (Part No.SO-33)

National – Manual Transmission Output Shaft Seal (Part No.7495S)

National – Bearing Race (Part No.M802011)

Dorman – Transmission Oil Pan: Direct Fit, Steel, 17 Quart (Part No.265-813)

B & M – Automatic Shifter, Megashifter-Right Hand Drive (Part No.80685)

Pro-King – Automatic Transmission Remanufactured Torque Converter (Part No.FM55B)

ATP – AT OIL PUMP SEAL (Part No.LO-29)

ATP – AT CONTR SHAFT SEAL (Part No.FO-15)

ATP – AT SOLENOID SEAL (Part No.JO-15)

National – Multi-Purpose Seal (Part No.7044NA)

ATP – AUTOMATIC TRANS PART (Part No.FGS-110)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.242009)

Pro-King – Automatic Transmission Deluxe Rebuild Kit (Part No.KS-16)

National – Multi-Purpose Seal (Part No.6988H)

ATP – A/T FLYWHEEL BOLT (Part No.ZX-1016)

B & M – Shift Improver Kit (Part No.40264)

Pro-King – Automatic Transmission Vacuum Modulator (Part No.MD-27)

Driveworks – Oil Seal (Part No.S-7300S)

Driveworks – Taper Bearing Cone (Part No.S-M-86649)

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

ATP – AUTO TRANS BAND (Part No.FX-124)

Driveworks – Tapered Roller Bearing (Part No.S-25520)

Energy Suspension – Transmission Crossmember Mount Bushings (Part No.4.1102G)

Carquest Premium – Automatic Transmission Gear Position Sensor (Part No.NSA1037)

Motorcraft – Original Equipment (O.E.) Sensor – Manual Lever Position – MLPS (Part No.SW-5713)

National – Bearing Race (Part No.M802011)

National – Multi-Purpose Bearing (Part No.A-2)

National – Bearing (Part No.M86649)

National – Multi-Purpose Bearing (Part No.A-17)

National – Tapered Roller Bearing Cone (Part No.M802048)

Driveworks – Taper Bearing Cone (Part No.S-M-86649)

National – Bearing Race (Part No.362A)

National – Multi-Purpose Bearing (Part No.207-L)

National – Multi-Purpose Bearing (Part No.FA-35688)

Driveworks – Oil Seal (Part No.S-2655)

National – Shaft Repair Sleeve (Part No.99138)

National – Multi-Purpose Seal (Part No.7692S)

National – Multi-Purpose Seal (Part No.331107N)

National – Multi-Purpose Seal (Part No.3604)

Driveworks – Oil Seal (Part No.S-7692S)

National – Multi-Purpose Seal (Part No.2655)

ATP – AT CONTR SHAFT SEAL (Part No.FO-15)

National – Multi-Purpose Seal (Part No.7929S)

ATP – AT DPSTK TUBE SEAL (Part No.SO-33)

ATP – AT EXT HOUSING SEAL (Part No.HO-9)

National – Multi-Purpose Seal (Part No.2443)

National – Multi-Purpose Seal (Part No.240816)

Motive Gear – Pinion Seal (Part No.3604)

Energy Suspension – Transmission Mount (Part No.4.1104R)

Anchor – Transmission Mount: Rear, 1 Piece (Part No.2388)

ATP – AT SOLENOID SEAL (Part No.JO-15)

ATP – ATP Automatic Transmission Modulator Valve (Part No.FX-226)

Dorman – Help – Brake and Clutch Bushings (Part No.74016)

ATP – AT SHF LINK BUSHING (Part No.FO-300)

Pro-King – Automatic Transmission Vacuum Modulator (Part No.MD-36)

Energy Suspension – Transmission Crossmember Mount Bushings (Part No.4.1102R)

Energy Suspension – Transmission Crossmember Mount Bushings (Part No.4.1102G)

ATP – AUTO TRANS BAND (Part No.FX-252)

ATP – AUTO TRANS BAND (Part No.FX-174)

Carquest Premium – Automatic Transmission Modulator Valve (Part No.VMC1048)

Carquest Premium – Automatic Transmission Modulator Valve (Part No.VMC1025)

Carquest Premium – Automatic Transmission Modulator Valve (Part No.VMC1024)

ATP – AUTO TRANS BAND (Part No.FX-124)

Imperial – High Performance Transmission Oil Cooler (Part No.240516)

Imperial – Maxi-Kool® XL Transmission Oil Cooler (Part No.243007)

Imperial – Plate and Fin Style Transmission Cooler, Light Duty, 3/4" x 5-7/8" x 11" (Part No.243006)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.242010)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.242009)

Imperial – Plate and Fin Style Transmission Cooler, Heavy Duty, 3/4" x 9-1/2" x 11" (Part No.243008)

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242012)

Imperial – High Performance Transmission Oil Cooler (Part No.240514)

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Imperial – High Performance Transmission Oil Cooler (Part No.240512)