1980 Ford Fairmont Engine Parts
More 1980 Ford Fairmont Engine Parts Categories
If you’re looking for an original Engine Parts replacement for a 1980 Ford Fairmont, you can search through our selection below. You’ll also find aftermarket and OEM Engine Parts to meet your needs.
Essential 1980 Ford Fairmont Engine Parts
Dayco – Premium Timing Belt, 48.39 Inch With 129 Square Tooth (Part No.95014)
from
$14.29
Manufactured with tough, wear-resistant fabric, high-tensile strength cord and a molded tooth surface, the Dayco timing belt provides consistent slip-proof power transfer and high resistance to oil and engine heat. The belt features a molded cog design which runs quieter and is more economical and a premium, high modulus glass fiber cord that delivers precise length stability to keep the engine running smoothly over the life of the belt.
Product Features:
See More
Product Features:
- Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
- Offers noise reduction and minimum dimensional tolerances for precise valve timing
- Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
- This specific belt is for applications with standard temperature and load requirements with a square tooth profile
National – Engine Harmonic Balancer Repair Sleeve (Part No.88187)
from
$11.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Made of stainless steel
- Designed to prevent timing cover seal leaks
- Takes up gaps caused by worn-out harmonic balancer shafts
Edelbrock – Engine Gasket Set (Head / Intake / Exhaust / Valve Cover) for Ford (Part No.7364)
from
$141.99
Product Features:
See More
- Head: 4.100″ Bore/0.045″ Thick/9.8cc Vol.
- Intake: 1.20″x2.00″ Port/.060″ Thick
- Exhaust: 1.25″x1.48″ Port
- 5/16″ Valve Cover
- Multi Piece Configuration
Dorman – Steel Cup Expansion Plug 3/4 In., Height 0.250 (sold by each) (Part No.555-012)
from
$1.49
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Crankshaft Rebuilders – Remanufactured Crankshaft Kit (Part No.15350)
from
$293.99
Remanufactured precision machined OE crankshafts.
Product Features:
See More
Product Features:
- Includes matching rod and main bearings.
- Journals Micropolished.
- All units subject to complete quality inspection.
Dorman – STD Cylinder Head Bolt, 7/16-14 X 3.938 X 1-1/16 In., Hex 5/8 In. (sold by each) (Part No.675-131)
from
$3.99
Cylinder head bolt stripped or broken? This engine cylinder head bolt directly replaces the original bolt on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Direct replacement – designed to match the fit and function of the original cylinder head bolt on certain vehicles
- Corrosion resistant – withstands elements for reliable service life
- Application specific – made to hold cylinder head in place on specific vehicles
- Trustworthy quality – backed by team of engineers and inspectors in United States
National – Multi Purpose Seal (Part No.5108)
from
$33.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Felpro – Engine Gasket Set (Part No.FS 7916 PT-2)
from
$84.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- PROPRIETARY COATING — Nonstick anti-friction coating seals small surface scratches and imperfections
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- NO RETORQUE DESIGN — Steel core helps eliminate the need for retorquing head bolts
- STRONG AND DURABLE — Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Dorman – Engine Oil Pan: Direct Fit, Steel, Rear Sump (Part No.264-023)
from
$101.99
Oil pan leaking? This engine oil pan is precision-engineered to match the original equipment pan on specific vehicle years, makes and models for a reliable replacement.
Product Features:
See More
Product Features:
- Direct replacement – this engine oil pan is made to match the original pan on specific vehicles
- Complete assembly – includes replacement pan and drain plugs to match original components
- Durable design – high-strength coating prevents future corrosion
- Trustworthy value – backed by team of engineers and quality control experts in the United States
Flex A Lite – Oil Cooler Sandwich Adapter Kit (Part No.3961)
from
$42.99
Oil Cooler Sandwich Adapter Kit
Dorman – Pik-a-Nut – Steel Cup Expansion Plug 1-9/16 In., Height 0.380 (Part No.362518.1)
from
$2.29
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Felpro – Gasket Kit (Part No.260-1125)
from
$103.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Includes all parts needed to complete the repair
Anchor – Engine Mount: Front Left, Front Right, 1 Piece (Part No.2385)
from
$8.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to FORD 78-83; MERCURY 78-83;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1978-1983
- Weight approx: 2 Lbs
- PART GROUP: 2385, 2385
Sealed Power – Engine Push Rod (Part No.RP-3167)
from
$2.49
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More
Sealed Power – Engine Camshaft Bearing Set (Part No.1439M)
from
$30.49
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Steel-backed Babbitt lining material
- Used in automotive and high-performance
- Babbitt is designed to perform under extreme loads w/o damaging other engine parts
- Babbitt is more environmentally friendly than other material
- ISO & QS certified manufacturing
Carquest Premium – Engine Crankshaft Position Sensor (Part No.CSC1761)
from
$50.99
A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments, including thermal shock and vibration, with unparalleled reliability, durability, and accuracy.
Product Features:
See More
Product Features:
- Products are produced in ISO 14001 and IATF 16949 certified facilities to ensure the highest quality and consistency throughout the production process.
- Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
- Manufactured in an anti-static environment to ensure reliability and stability.
- Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
- Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.
Felpro – Oil Pan Gasket Set: Cork-Rubber, 4 Piece Set (Part No.OS 12701 C)
from
$22.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
- SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
Cloyes Performance – High Performance Timing Set (Part No.9-3138)
from
$147.99
Billet Crank Sprocket Has Three Keyways for +/- 4 Degrees Adjustability. Both Sprockets Heat Treated for Durability. TRUE Roller 0.250″ Roller Diameter Chain for Reduced Friction. 3-Piece Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout
Product Features:
See More
Product Features:
- The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
- Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
- Refer to our online catalog for detailed application-specific information
- Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.
Sealed Power – Engine Rocker Arm Kit (Part No.R-879)
from
$18.79
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Complete rocker arm assembly
- 1 Arm
- 1 Pivot
- Stamped steel
- Bolt type mount
- Utilizes ISO & QS certified manufacturing
Felpro – Engine Conversion Gasket Set (Part No.CS 8548-4)
from
$31.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
- Application specific design to ensure a perfect fit
- Meets or exceeds all original equipment specifications
- Validated for fit, form and function
- Unsurpassed quality you can trust
- Includes all the parts necessary to complete the repair unless otherwise noted
- Includes all the parts necessary to complete the repair unless otherwise noted
Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 13364)
from
$23.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- RIGHT TYPE — Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
- QUALITY MATERIALS — Each valve stem seal features materials based on the specific application for your vehicle repair
- ENGINEERING EXPERTISE — Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
- INSTALLATION AID — Installation tool included to protect inner lip of seal from damage during seal installation
- COVERAGE — Available for domestic and foreign nameplate vehicles
Imperial – Ultra-Cool Engine Oil Cooler Kit (Part No.240457)
from
$167.99
Product Features:
See More
- Size: 3/4 in. x 10 in. x 12-1/4 in.
- Medium duty applications
- All except Chevrolet V8 applications
- Two-pass design for increased cooling
Felpro – CAMSHAFT FRONT SEAL SET (Part No.TCS 45108)
from
$15.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
ARP Auto Racing – For Use With 289/ 302 Cubic Inch/ Boss 302 Ford, Apr2000 Steel, 220000 Psi (Part No.154-7904)
from
$25.99
Many an engine has been destroyed as a result of oil pump driveshaft failure. To cure this all too common problem, ARP has designed an extra heavy duty shaft that will provide you with the necessary reliability. The shaft is made from heat treated, premium grade aerospace chrome moly steel. Moreover, the shaft diameter is a larger diameter than the OEM unit. These features combine to enable ARP shafts to handle the added torque requirements of increased capacity oil pumps or heavy viscosity lubricants.
Product Features:
See More
Product Features:
- Extra Heavy Duty Shaft That Will Provide The Necessary Reliability
- Enable Shafts To Handle The Added Torque Requirements Of Increased Capacity Oil Pumps Or Heavy Viscosity Lubricants
- Made From Arp2000 And Heat Treated To 220,000 Psi
- CNC Milled (Not Broached) Hex, And Has The Retaining Washer Installed
Sealed Power – Engine Connecting Rod Bearing (Part No.2600A)
from
$4.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- A-Series bi-metal aluminum alloy
- Greater seizure resistance than tri-metal material
- Dramatically reduces or eliminates bearing wear
- Made with silicon to provide greater surface hardness
- Silicon particles help polish crankshaft journal to further reduce wear during operation
- Utilizes ISO & QS certified manufacturing
Melling – Stock Replacement OE Type Oil Pump (Part No.M-65B)
from
$85.99
Melling oil pumps provide dependable performance every time in every application. Every Melling oil pump is engineered and assembled to the highest production standards from high quality materials. All Melling oil pumps use the latest in gear and gerotor
Product Features:
See More
Product Features:
- Manufactured from high quality materials for consistent durable wear
- Precision engineered for optimum fit and function
- Designed for long-life and worry-free performance
- Melling oil pumps are tested for pressure and flow under operating conditions to ensure quality
Melling – Stock Replacement Type Oil Pump Repair Kit (Part No.K-68)
from
$61.99
Melling oil pump repair kits are provided to supply the parts needed to rebuild a specific individual oil pump. Melling kits include all the required parts needed for a quality oil pump rebuild. Although Melling recommends the installation of a new oil pump, Melling oil pump repair kits are the preferred choice when a rebuilder has the desire to reuse the original oil pump casting or front timing cover.
Product Features:
See More
Product Features:
- Includes components needed to rebuild a worn oil pump providing an alternative to purchasing a new oil pump
- Components are manufactured from high quality materials for durable wear
- Components are precision engineered for optimum fit and function
- Designed for long-life and worry-free performance
Dorman – Pipe Plug C.S. Hex 3/4-14 Npt X 5/8 In. (sold by each) (Part No.090-072)
from
$3.49
This engine cylinder head plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine cylinder head plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Popular 1980 Ford Fairmont Engine Parts Categories
1980 Ford Fairmont Engine Parts
You count on your 1980 Ford Fairmont to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Engine Parts. With 170 Engine Parts ranging in price from $0.43 to $334.99, you’re sure to find everything you need for your 1980 Ford Fairmont.
Brands matter. If you want to shop a specific Engine Parts brand, we stock 17 different brands like Sealed Power, Felpro, and Dorman. 1980 Ford Fairmont Engine Parts start as low as $0.43!
One of the best ways to find top quality OEM or aftermarket Engine Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 524 extensive product reviews on 1980 Ford Fairmont Engine Parts. Some of the top-rated Engine Parts products we carry are Stock Replacement OE Type Oil Pump with 4.8 stars and Engine Timing Cover Gasket Set with 4.1 stars.
Did we mention you can order your Engine Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Engine Parts inventory for your 1980 Ford Fairmont below to get started!
Top-Rated Engine Parts Brands For Your 1980 Ford Fairmont
Trusted Engine Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1980 Ford Fairmont running right for years to come. In our inventory you’ll find brands like Sealed Power, Felpro, Dorman, and even more.
Popular Driveworks Engine Parts
You’ll find popular Driveworks brand products across Engine Timing Parts. All are waiting to get your 1980 Ford Fairmont back on the road. Some of the top-rated Driveworks products in these categories are:
Top-Rated Felpro Engine Parts
If Felpro are what you’re looking for, our inventory holds plenty. We stock Felpro brand Engine Parts for your 1980 Ford Fairmont, and some of our most reviewed Felpro parts include:
FAQs for 1980 Ford Fairmont Engine Parts
What are the most purchased Engine Parts for the 1980 Ford Fairmont?
Out of 170 Engine Parts for the 1980 Ford Fairmont, the most popular in our inventory are:
What are the top-rated 1980 Ford Fairmont Engine Parts?
Top-rated Engine Parts for your 1980 Ford Fairmont based on customer reviews/ratings are:
from
$46.99
(8)
Stock Replacement OE Type Oil Pump
“Product was a perfect fit top notch at a great price”
from
$51.99
(6)
Oil Pan Gasket Set: PermaDryPlus Rigid Carrier, Includes Snap-Ups®, 5 Piece Set
“Very easy to install.
Alignment pins are great bonus. They hold the gasket in the exact location.”
