from

$12.99

Product Features:

Cover gasket
Fits Dana Spicer 30

from

$11.99

Replacement ring gear bolt for Model 35, Dana 25, 27, 30 & 44. 3/8″ x 24.

Product Features:

Ring gear bolt for Dana Spicer 25, 27, 30, 44 and AMC Model 35
3/8″ x 24 thread

from

$469.99

Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:

Fits standard rotation Dana Spicer 30 without crush sleeve
7.20″ ring gear diameter
26 spline pinion
10 ring gear bolts
3.73 ratio

from

$12.99

Dana 30 & Dana 44 roll PIN, 0.235″ DIA, for cross pin shaft.

Product Features:

Roll pin for Dana Spicer 30 and Dana Spicer 44
0.235″ diameter

from

$639.99

The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect. Does not fit Std. JK Carrier. Use YC D706008

Product Features:

Fits Dana Spicer 30 with 27 spline axles
Made from 9310 steel for added strength
Replaces the spiders in a standard carrier case

from

$44.99

3 Qt. Penzoil 80W90 conventional gear Oil.

Product Features:

Includes three quarts of conventional oil

from

$155.99

Yukon replacement standard open spider gear kit for Dana 30 with 27 spline axles and with or without quick disconnect. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:

Spider gear kit
Fit Dana Spicer 30 open differential with 27 spline axles
Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.

from

$10.29

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$7.96

Differential Carrier

from

$946.99

The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker is a mechanical locking differential. It features a forged case and 8620 internals for maximum strength. It’s patented design reduces common locker failures. All units assembled in the USA! All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts and associated labor, up to $2,000!

Product Features:

Fits Dana Spicer 30 with 27 spline axles
3.73 and up ratio only
Patented internal design reduces common locker failures
8620 internals for added strength
Assembled in the USA

from

$4.99

Product Features:

Oil baffle for Dana Spicer 30, Dana Spicer 44 IFS, Dana Spicer 50, AMC Model 35 IFS

from

$12.99

Product Features:

Cross pin shaft for Dana Spicer 30
Fits standard open differentials only

from

$279.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

Fits Dana Spicer 30 rear
Included are pinion bearings and races, pinion seal, pinion nut, complete pinion shim kit, and marking compound with brush.

from

$27.99

Product Features:

Bulkhead fitting

from

$9.99

5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.

Product Features:

Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
1/2″ head

from

$172.99

Set-up carrier bearing kit (2 bearings, no races) LM501349. No return.

Product Features:

Set up bearing kit
Fits Dana Spicer 30
Easily slips on and off carrier journals to allow for easier carrier shim adjustment

from

$6.99

Product Features:

Inner oil slinger for Dana Spicer 25, 27, 30, 44 and 50

from

$26.99

Dana 30 & Dana 44 Power Lok bolt, left hand, & 8.75″ Chrysler & 55P.

Product Features:

Power Lok case bolt for Dana Spicer 30, Dana Spicer 44, Chrysler 8.75″ and 1955-1964 GM passenger car
Left hand thread

from

$39.99

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$16.92

Pinion Seal, Red

from

$3.99

Replacement pinion nut washer for Dana 25, 27, 30, 36, 44 & 53.

Product Features:

Pinion nut washer for Dana Spicer 25, 27, 30, 44 and 50

from

$17.99

Yukon 1541H alloy right hand rear axle for Model 35 (drum brakes) with a 54 tooth, 2.7″ ABS ring. axle has a length of 29-1/4″ inches and 27 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H allo

Product Features:

Pinion depth shims for AMC Model 35 and Chrysler 7.25″

from

$18.99

Product Features:

Bulkhead quit connect fitting

from

$10.99

Dana 25, Dana 27, & Dana 30 side gear Thrust washer.

Product Features:

Side gear thrust washer for Dana Spicer 25, 27, 30 and AMC Model 35
1.560″ I.D.
Fits standard open differentials only

from

$23.99

Product Features:

Brand may vary by location

from

$689.99

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings
Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications

from

$121.99

Yukon replacement yoke for Dana 30, 44, and 50 with fine spline and a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Dana Spicer 44
26 spline
1310 u-joint size
3.219″ snap ring span
1.062″ cap diameter
Outside snap ring design
Strap style

from

$217.99

Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:

Fits Dana Spicer 30 rear
Included are carrier bearings and races, pinion bearings and races, pinion seal, marking compound and brush.

1979 Volvo 242 Differentials

More 1979 Volvo 242 Differentials

Essential 1979 Volvo 242 Differentials

Yukon Gear – Replacement Cover Gasket For Dana 30 (Part No.23003)

Yukon Gear – Replacement Ring Gear Bolt For Model 35, Dana 25, 27, 30 & 44 – 3/8" X 24 (Part No.33038)

Yukon Gear – High Performance Ring & Pinion Replacement Gear Set For Dana 30 In A 3.73 Ratio (Part No.24019)

Yukon Gear – Dana 30 / 44 Roll Pin Replacement (Part No.33312)

USA Standard Gear – Spartan Locker for Dana 30 Differential with 27 Spline Axles, Includes Heavy-duty Cross Pin Shaft (Part No.17000)

Yukon Gear – 3 Qt – Penzoil 80W90 Conventional Gear Oil (Part No.15002)

Yukon Gear – Replacement Standard Open Spider Gear Kit For Dana 30 With 27 Spline Axles (Part No.16073)

Driveworks – Taper Bearing Set (Part No.S-A-6)

Professional Parts Sweden – Differential Carrier (Part No.J705017349PPS)

Yukon Gear – Grizzly Locker For Dana 30, 27 Spline, 3.73 & Up (Part No.28000)

Yukon Gear – Replacement Oil Baffle For Model 35 IFS Front, Dana 25, 27, 30, 44 IFS & Disconnect And Dana 50 (Part No.33002)

Yukon Gear – Replacement Cross Pin Shaft For Standard Open Dana 30 (Part No.33316)

Yukon Gear – Pinion Install Kit For Dana 30 Rear Differential (Part No.13017)

Yukon Gear – Zip Locker Bulkhead Fitting (Part No.34001)

Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)

Yukon Gear – Set Up Bearing (Part No.56036)

Yukon Gear – Dana 25 / 27 / 30 / 44 / 50 Inner Oil Slinger Replacement (Part No.33012)

Yukon Gear – Dana 30 & Dana 44 Power Lok Bolt, Left Hand, & 8.75" Chrysler & 55P (Part No.33234)

National – Shaft Repair Sleeve (Part No.99139)

SKF – Pinion Seal, Red (Part No.J701050573SKF)

Yukon Gear – Dana 25 / 27 / 30 / 36 / 44 / 53 Pinion Nut Washer Replacement (Part No.33163)

Yukon Gear – Replacement Pinion Depth Shims For Dana 35, Model 35 & Chrysler 7.25" (Part No.55014)

Yukon Gear – Zip Locker Bulkhead Quick-Disconnect Fitting (Part No.34038)

Yukon Gear – Dana 30 Side Gear Thrust Washer (Part No.33284)

Driveworks – Camshaft Seal (Part No.S-99139)

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

Yukon Gear – Replacement Yoke For Dana 30, 44, And 50 With Fine Spline And A 1310 U/Joint Size (Part No.41017)

Yukon Gear – Bearing Install Kit For Dana 30 Rear Differential (Part No.11017)

Popular 1979 Volvo 242 Differentials Categories

1979 Volvo 242 Differentials

Differentials Brands To Make Your 1979 Volvo 242 Last

Popular Valvoline Differentials

FAQs for 1979 Volvo 242 Differentials

What are the most purchased Differentials for the 1979 Volvo 242?

What are the top-rated 1979 Volvo 242 Differentials?

More Popular Parts for All Makes