1979 Volvo 242 Drivetrains
More 1979 Volvo 242 Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1979 Volvo 242, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1979 Volvo 242 Drivetrains
USA Standard Gear – Ring/Pinion Sets (Part No.36348)
from
$321.99
Ring/Pinion Sets
National – Bearings (Part No.206-FF)
from
$17.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
SKF – Pinion Seal, Red (Part No.J701050573SKF)
from
$16.92
Pinion Seal, Red
Yukon Gear – Replacement Cover Gasket For Dana 30 (Part No.23003)
National – Bearings (Part No.A-6)
from
$16.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Replacement Standard Open Carrier Case For Dana 30, 3.73 & Up (Part No.20026)
from
$159.99
Yukon replacement standard open carrier case for Dana 30, 3.73 & up, 1.943″ tall. If purchasing this case for a D30 JK front, you will need to also purchase spider gear set YPKD30-S-27.
Product Features:
See More
Product Features:
- Standard open carrier case
- Fits Dana Spicer 30
- 3.73 and up ratio only
- Does not include spider gears
Yukon Gear – Dana 44, 8.2", 12P, 12T, Vet, And Model 20 U-Bolts (Part No.41198)
from
$30.99
1310 U-bolts, 5/16″ x 1-3/8″ Dana 30, Dana 44, 8.2″, 12P, 12T, VET, Model 20.
Product Features:
See More
Product Features:
- u-joint u-bolt kit
- Fits AMC Model 20, Dana Spicer 30 and 44, GM 8.2″, 12 bolt passenger car and truck and 1963-1979 Corvette
- 1310 u-joint size
- Includes two u-bolts and four nuts
Driveworks – Universal Joint (Part No.DW-369)
from
$20.49
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).
Product Features:
See More
Product Features:
- The cross is hot forged for the higher torque and horsepower
- The bearing cups are made by cold forging, having higher strength and better rigidity
- Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
- Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
- Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
- Snap rings are held to strict tolerances to ensure proper cup position and retention
- Nitrile rubber seals to optimize grease retention and reduce contamination
Yukon Gear – Dana 30 / 44 Roll Pin Replacement (Part No.33312)
from
$12.99
Dana 30 & Dana 44 roll PIN, 0.235″ DIA, for cross pin shaft.
Product Features:
See More
Product Features:
- Roll pin for Dana Spicer 30 and Dana Spicer 44
- 0.235″ diameter
Yukon Gear – Minor Install Kit For Dana 30 Rear Differential (Part No.12014)
from
$135.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.
Product Features:
See More
Product Features:
- Fits Dana Spicer 30 rear
- Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.
Yukon Gear – Replacement Cross Pin Shaft For Standard Open Dana 30 (Part No.33316)
from
$12.99
Product Features:
See More
- Cross pin shaft for Dana Spicer 30
- Fits standard open differentials only
Corteco – Axle Seal (Part No.K4021390035CFW)
from
$7.46
You can expect original quality and a first-to-market range from Freudenberg, the inventor and the world’s leading Original Equipment manufacturer of radial shaft seals. As the aftermarket distribution arm of Freudenberg Group – the designer and OEM manufacturer of the Simmerrings – Corteco draws on the material and manufacturing expertise of its parent company and is able to deliver products with outstanding OE quality, distinguished by the high durability of their sealing properties. A new generation of innovative seals that help to reduce friction and fuel consumption is also available.
Product Features:
See More
Product Features:
- Machined rubber sealing edge provides greater accuracy and consistency, as well as a better sealing surface.
- The flanged design allows for easier and proper installation and helps avoid cocking.
- The latex bore coat seals the outer diameter leak path and helps compensate for minor bore imperfections.
- Extra dust lip helps keep harmful contaminants, such as dirt, out of the bearing and protects against rust and corrosion.
Yukon Gear – Dana 25 / 27 / 30 / 44 / 50 Inner Oil Slinger Replacement (Part No.33012)
Yukon Gear – Carrier Installation Kit For Dana 30 Differential (Part No.57002)
from
$93.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Dana 30 differential. This kit contains carrier bearings, races and shims.
Product Features:
See More
Product Features:
- Fits Dana Spicer 30
- Includes carrier bearings and races and carrier shim kit
Yukon Gear – Steel Cover For Dana 30 Standard Rotation Front (Part No.32316)
Driveworks – Taper Bearing Cup (Part No.S-LM-501314)
from
$7.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Driveworks – Ball Bearing (Part No.S-201-CC)
from
$1.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Spicer – Universal Joint (Part No.5-1310X)
from
$35.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More
Yukon Gear – Bearing Race Driver (Part No.56022)
from
$188.99
Bearing race driver. No return.
Product Features:
See More
Product Features:
- Bearing race driver
- Fits M86610 race
- All steel construction
Driveworks – Ball Bearing (Part No.S-206-FF)
Yukon Gear – Pinion Install Kit For Dana 30 Rear Differential (Part No.13017)
from
$233.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits Dana Spicer 30 rear
- Included are pinion bearings and races, pinion seal, pinion nut, complete pinion shim kit, and marking compound with brush.
MTC – Driveshaft Support Washer (Part No.K105294653MTC)
from
$1.63
The MTC Driveshaft Support Washer is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Yukon Gear – Replacement Yoke For Dana 30, 44, And 50 With Fine Spline And A 1310 U/Joint Size (Part No.41017)
from
$126.99
Yukon replacement yoke for Dana 30, 44, and 50 with fine spline and a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 44
- 26 spline
- 1310 u-joint size
- 3.219″ snap ring span
- 1.062″ cap diameter
- Outside snap ring design
- Strap style
National – Shaft Repair Sleeve (Part No.99139)
from
$39.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
SKF – Transmission Case Bearing (Part No.J202124297SKF)
from
$38.56
Transmission Case Bearing
Yukon Gear – 1310 & 1330 U/Joint Strap, Dana 30, Dana 44, Model 35, & 9.25" With Bolts (Part No.41195)
from
$18.99
1310 & 1330 U/joint strap, Dana 30, Dana 44, Model 35, & 9.25″ w/bolts.
Product Features:
See More
Product Features:
- u-joint strap kit
- Fits Dana Spicer 30 and 44, AMC Model 35 and Chrysler 9.25″
- 1310 and 1330 u-joint size
- Includes two straps and four bolts
Yukon Gear – Pump Up Kit, Zip Locker (Part No.34031)
from
$174.99
Pump up kit, Zip Locker.
Product Features:
See More
Product Features:
- Tire pump up kit
- Includes hose, fittings, couplers and teflon tape
Yukon Gear – 3 Qt – Penzoil 80W90 Conventional Gear Oil (Part No.15002)
from
$44.99
3 Qt. Penzoil 80W90 conventional gear Oil.
Product Features:
See More
Product Features:
- Includes three quarts of conventional oil
Popular 1979 Volvo 242 Drivetrains Categories
1979 Volvo 242 Drivetrains
You count on your 1979 Volvo 242 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 131 Drivetrains ranging in price from $1.63 to $1,303.99, you’re sure to find everything you need for your 1979 Volvo 242.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 16 different brands like Moog, DriveWorks, and National. 1979 Volvo 242 Drivetrains start as low as $1.63!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 242 extensive product reviews on 1979 Volvo 242 Drivetrains. Some of the top-rated Drivetrains products we carry are Bearings with 5.0 stars and Universal Joint with 5.0 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1979 Volvo 242 below to get started!
Top-Rated Drivetrains Brands For Your 1979 Volvo 242
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1979 Volvo 242 running right for years to come. In our inventory you’ll find brands like Moog, DriveWorks, National, and even more.
Popular Spicer Drivetrains
You’ll find popular Spicer brand products across Drive Shafts and Axles. All are waiting to get your 1979 Volvo 242 back on the road. Some of the top-rated Spicer products in these categories are:
Top-Rated MOOG Driveline Products Drivetrains
If MOOG Driveline Products are what you’re looking for, our inventory holds plenty. We stock MOOG Driveline Products brand Drivetrains for your 1979 Volvo 242, and some of our most reviewed MOOG Driveline Products parts include:
FAQs for 1979 Volvo 242 Drivetrains
What are the most purchased Drivetrains for the 1979 Volvo 242?
Out of 131 Drivetrains for the 1979 Volvo 242, the most popular in our inventory are:
What are the top-rated 1979 Volvo 242 Drivetrains?
Top-rated Drivetrains for your 1979 Volvo 242 based on customer reviews/ratings are:
from
$37.99
(3)
Greaseable Premium Universal Joint
“Perfect for rebuilding front (3 needed) & rear (1 needed) driveshafts on the Land Rover Discovery II. Made in the USA, keep them greased and the last ”
