1979 Toyota Pickup Drivetrains

Essential 1979 Toyota Pickup Drivetrains

Yukon Gear – Ring Gear Bolt (Part No.33060)

Ring Gear Bolt

from

$6.99
Ring Gear bolt for Toyota 7.5″, 8″, V6, Landcruiser reverse front & T100/Tacoma w/ factory locker. 11mm x 1.0.

Product Features:
  • Ring gear bolt for Toyota 7.5″, 8″, 8″ V6, Landrcuiser reverse rotation front and T100 and Tacoma rear with factory locking differential
  • 11mm x 1.0
See More

Dorman – Standard Spindle Nut M19-1.5 Hex Size 30mm (Part No.615-109.1)

Standard Spindle Nut M19-1.5 Hex Size 30mm

from

$9.49
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – Toyota 8" & V6 Pinion Nut Washer (Part No.33168)

Toyota 8" & V6 Pinion Nut Washer

from

$16.99
Toyota 8″ & V6 pinion nut washer.

Product Features:
  • Pinion nut for Toyota 8″ and V6
See More

Driveworks – Tapered Cup Wheel Bearing Assembly (Part No.S-LM-102910)

Tapered Cup Wheel Bearing Assembly

from

$8.49
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

USA Standard Gear – Standard Spider Gear Set For Toyota 8", 4 Cylinder (Part No.39031)

Standard Spider Gear Set For Toyota 8", 4 Cylinder

from

$204.99
Product Features:
  • Spider gear kit
  • Fits Toyota 8″ with 4 cylinder engine
  • Includes two side gears, two pinion gears, cross pin shaft, roll pin spider gear thrust washers.
See More

Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-988)

Drive Shaft Repair Kit - Only Fits Dorman Driveshafts

from

$51.99
This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle
  • Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Milemarker – Hub Conversion Kit (Part No.95-29918)

Hub Conversion Kit

from

$86.99
Converts automatic to manual.

Product Features:
  • Hub Conversion Kit
See More

National – Multi Purpose Seal (Part No.224810)

Multi Purpose Seal

from

$12.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Yukon Gear – RngPnnKt (Part No.24715)

RngPnnKt

from

$404.99
RngPnnKt

Yukon Gear – Pinion Depth Shim Kit For Toyota8", GM 7.5", 8.2" & 12 Bolt Truck (Part No.55064)

Pinion Depth Shim Kit For Toyota8", GM 7.5", 8.2" & 12 Bolt Truck

from

$39.99
8″ Toyota, 7.5″ GM, 8.2″ GM, 12T, pinion shim set, & Mazda truck.

Product Features:
  • Pinion depth shim kit for Toyota 7.5″, 8″ and V6
See More

Yukon Gear – Axle Bearing & Seat Kit For Toyota 8", 7.5" & V6 Rear (Part No.10044)

Axle Bearing & Seat Kit For Toyota 8", 7.5" & V6 Rear

from

$294.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Axle bearing and seal kit (inner and outer seals) for Toyota 7.5″, 8″, and V6 rear. This axle bearing & seal kit services one side only.

Product Features:
  • Axle bearing and seal kit for Toyota 7.5″, 8″ and V6 rear
  • Includes axle bearing, inner and outer axle seals and snap ring
  • This kit will not work with ABS applications
  • Services one side
See More

Yukon Gear – 1541H Alloy Rear Axle For ’86-’95 Toyota Pick And 4Runner (Part No.21659)

1541H Alloy Rear Axle For '86-'95 Toyota Pick And 4Runner

from

$284.99
Yukon 1541H alloy rear axle for ’86-’95 Toyota Pick and 4Runner with length 28 1/2″ and 30 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a five year warranty against manufacturing defects.

Product Features:
  • 30 spline
  • 6 lug
  • 28.5″ long
  • Fits Toyota 8″ and V6 in 1989-1995 Pickup and 4Runner
See More

National – Multi Purpose Seal (Part No.223253)

Multi Purpose Seal

from

$17.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Yukon Gear – 8" Reverse High-Pinion Toyota Drop Out (Part No.32298)

8" Reverse High-Pinion Toyota Drop Out

from

$529.99
8″ Reverse high-pinion Toyota Drop Out (fits 8″ Housing) .

Product Features:
  • Fits Toyota Landcruiser reverse rotation front
See More

USA Standard Gear – Spartan Spring & Pin Kit, Fits Smaller Designs (Part No.17011)

Spartan Spring & Pin Kit, Fits Smaller Designs

from

$26.99
Spartan spring & pin kit, fits smaller designs.

Product Features:
  • Replacement spring and pin kit for Spartan Locker
  • Fits Dana 30, Dana 44, AMC Model 20, AMC Model 35, and Toyota designs
  • Includes 4 springs and 4 alignment pins
See More

National – Bearings (Part No.JLM104948)

Bearings

from

$24.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Crush Sleeve Eliminator Kit For Toyota V6 (Part No.55053)

Crush Sleeve Eliminator Kit For Toyota V6

from

$59.99
V6 Toyota solid crush sleeve replacement spacer kit, preload.

Product Features:
  • Crush sleeve eliminator kit for Toyota V6
See More

Yukon Gear – Inner Stub Shaft Bearing For Toyota 7.5" IFS (Part No.18061)

Inner Stub Shaft Bearing For Toyota 7.5" IFS

from

$172.99
Product Features:
  • Inner stub shaft bearing
  • Fits Toyota 7.5″ IFS
See More

Driveworks – Tapered Roller Bearing (Part No.S-30306)

Tapered Roller Bearing

from

$14.29
Product Features:
  • Brand may vary by location
See More

Yukon Gear – Pinion Install Kit For Early Toyota 8" Differential (Part No.13089)

Pinion Install Kit For Early Toyota 8" Differential

from

$234.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses high quality bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Toyota 8″ and 4 cylinder engine, 1986 and up with OEM ring and pinion set
  • Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – 7.5", 8", & V6 Rear Axle Bearing Snap Ring / Retainer Clip (Part No.33373)

7.5", 8", & V6 Rear Axle Bearing Snap Ring / Retainer Clip

from

$10.99
Product Features:
  • Rear axle bearing snap ring for Toyota 7.5″, 8″ and V6
See More

Yukon Gear – High Performance Ring & Pinion Gear Set For Toyota 8" In A 5.29 Ratio (Part No.24624)

High Performance Ring & Pinion Gear Set For Toyota 8" In A 5.29 Ratio

from

$384.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:
  • Fits 1979-1985 Toyota Pickup and 4Runner and 1975-1990 Landcruiser
  • 5.29 ratio
  • 29 spline pinion
See More

National – Bearings (Part No.201-CC)

Bearings

from

$15.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Toyota 7.5 Pinion Nut (Part No.33155)

Toyota 7.5 Pinion Nut

from

$9.99
Toyota 7.5 pinion nut (M18x1.5).

Product Features:
  • Pinion nut for Toyota 7.5″
  • 18mm x 1.5 thread
See More

Yukon Gear – Zip Locker Bulkhead Quick-Disconnect Fitting (Part No.34038)

Zip Locker Bulkhead Quick-Disconnect Fitting

from

$18.99
Product Features:
  • Bulkhead quit connect fitting
See More

Yukon Gear – 8" Standard Open Pinion Gear Thrust Washer (Part No.33392)

8" Standard Open Pinion Gear Thrust Washer

from

$7.99
8″ standard Open pinion gear Thrust washer.

Product Features:
  • Pinion gear thrust washer
  • Fits Toyota 8″ with 4 cylinder engine
See More

Yukon Gear – Toyota V6 Cross Pin Shaft (Part No.33416)

Toyota V6 Cross Pin Shaft

from

$298.99
Product Features:
  • Cross pin shaft
  • Fits Toyota V6
See More

Yukon Gear – 12 Hole Yoke For ’83 And Newer Toyota 8" And V6 With 27 Splines (Part No.41105)

12 Hole Yoke For '83 And Newer Toyota 8" And V6 With 27 Splines

from

$109.99
Yukon 12 hole yoke for ’83 and newer Toyota 8″ and V6 with 27 splines. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Toyota 8″ and V6
  • 27 spline
  • Round companion flange
See More

Popular 1979 Toyota Pickup Drivetrains Categories

1979 Toyota Pickup Drivetrains

You count on your 1979 Toyota Pickup to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 164 Drivetrains ranging in price from $2.29 to $959.99, you’re sure to find everything you need for your 1979 Toyota Pickup.

Brands matter. If you want to shop a specific Drivetrains brand, we stock 17 different brands like National, Moog, and Yukon Gear. 1979 Toyota Pickup Drivetrains start as low as $2.29!

One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 79 extensive product reviews on 1979 Toyota Pickup Drivetrains. Some of the top-rated Drivetrains products we carry are Bearings with 5.0 stars and Shaft Repair Sleeve with 4.0 stars.

Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1979 Toyota Pickup below to get started!

Top-Rated Drivetrains Brands For Your 1979 Toyota Pickup

Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1979 Toyota Pickup running right for years to come. In our inventory you’ll find brands like National, Moog, Yukon Gear, and even more.

Popular MOOG Driveline Products Drivetrains

You’ll find popular MOOG Driveline Products brand products across Universal Joints. All are waiting to get your 1979 Toyota Pickup back on the road. Some of the top-rated MOOG Driveline Products products in these categories are:
Greaseable Premium Universal Joint
from $25.99
(10)
Greaseable Premium Universal Joint
U-Joints

Top-Rated National Drivetrains


If National are what you’re looking for, our inventory holds plenty. We stock National brand Drivetrains for your 1979 Toyota Pickup, and some of our most reviewed National parts include:
Bearings
from $16.99
(39)
Bearings
Axle Shaft Bearings
Bearings
from $6.99
(6)
Bearings
Differential Bearings
Bearings
from $9.99
(4)
Bearings
Transfer Case Output Shaft Bearings

FAQs for 1979 Toyota Pickup Drivetrains

What are the most purchased Drivetrains for the 1979 Toyota Pickup?

Out of 164 Drivetrains for the 1979 Toyota Pickup, the most popular in our inventory are:
3 Qt - Penzoil 80W90 Conventional Gear Oil
from $44.99
This product is not rated
3 Qt – Penzoil 80W90 Conventional Gear Oil
Differential Oil
Universal Joint
from $15.99
(6)
Universal Joint
U-Joints
Non-Greaseable Super Strength Universal Joint
from $27.99
This product is not rated
Non-Greaseable Super Strength Universal Joint
U-Joints

What are the top-rated 1979 Toyota Pickup Drivetrains?

Top-rated Drivetrains for your 1979 Toyota Pickup based on customer reviews/ratings are:
Bearings
from $89.99
(2)
Bearings
“Exactly what came out”
Shaft Repair Sleeve
from $41.49
(2)
Shaft Repair Sleeve
“Used this to repair a camshaft sealing surface on a 2000 Sienna. it worked incredibly well and was easy to use. My first time using a repair sleeve ”
Bearings
from $15.79
(2)
Bearings
“Good OE replacement, hopefully it lasts as long as the OEM part”