from

$766.99

Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.

Product Features:

2800-3200 RPM
Small And Big Blocks
Serious Performance
Furnace Brazed
Fully Balanced

from

$544.99

The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, new turbine hub and dual pattern drive lugs on some GM Holeshots.

Product Features:

Furnace Brazed Impeller
Steel Alloy Pump Drive Tube
Heavy Duty Needle Bearing
Between Stator and Turbine
Furnace Brazed Turbine

from

$276.99

Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts, the Xtreme Energy grind family offers gains in torque and horsepower while still delivering adequate vacuum for power brakes and other vacuum dependent accessories. Xtreme Energy camshafts work great in carbureted applications, but offer the best performance with aftermarket intake manifolds, lower gear ratios, headers and free flowing exhaust.

Product Features:

HYDRAULIC – Xtreme Energy Computer Controlled: Great in throttle body, crossfire or carbureted engine and 305 TPI.
249/260 Advertised Duration, 206/212 Duration @ .050″, .434″/.444″ Lift, 112 Lobe Separation
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$518.99

Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications. Offering

Product Features:

Good blend of efficiency and performance.
Perfect choice for performance street rebuilds.
Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.

from

$358.99

Product Features:

Designed for Optimum Torque and Acceleration
Maximum Performance From Idle through Mid-Range
Matched to Edelbrock Performer Intakes
Includes Hydraulic Lifters and Assembly Lube
Major Improvement in Throttle Response and Torque
Use For Daily Drivers/Trucks/Vans/RVs/4x4s
Take The Guesswork Out Of Camshaft Selection

from

$622.99

Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications. Offering

Product Features:

Good blend of efficiency and performance.
Perfect choice for performance street rebuilds.
Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.

from

$321.99

SMALL BLOCK CHEVY HYDRAULIC CAM AND LIFTER KIT – Xtreme Energy: Pro Street/bracket, needs good intake, headers, gear and 3300+ stall.

Product Features:

Cam and lifter kit for Small Block Chevy engines
CL-Kit includes cam, lifters, assembly lube, instructions and decals
HYDRAULIC – Xtreme Energy: Pro Street/bracket, needs good intake, headers, gear and 3300+ stall.
294/306 Advertised Duration, 250/256 Duration @ .050″, .519″/.523″ Lift, 110 Lobe Separation
Valve spring upgrade required

from

$24.99

Precision die-cast, these water necks or thermostat housings are first polished to a high luster, then chrome plated. Features an o-ring style seal to prevent water leaks. Comes with o-ring gasket and mounting bolts.

Product Features:

Chrome plated
Features an O-Ring style seal to prevent water leaks
Includes O-Rings andmounting bolts

from

$23.79

Spectre’s Chevrolet late model water neck offers the normal angled water neck and a 1/2 inch NPT threaded hole for a by-pass hose. This water neck has a chrome plated finish for a lasting look great and includes the bolts.

Product Features:

Fits Chevy engines
Includes a 1/2 inch NPT threaded hole for by-pass hose
Includes bolts
Chrome plated
Easy to install
O-ring/gasket not included

from

$26.99

Spectre’s Oldsmobile V8 water neck fits Oldsmobile 330, 350, 425 and 455 engines. This water neck has been designed around the OEM specifications and has a chrome plated finish for a lasting look that fits great. This water neck has an additional by-pass hose connection and includes the bolts.

Product Features:

Fits Oldsmobile 330, 350, 425 and 455 engines
Chrome plated
Bolts included
Designed for OEM fit
Easy to install
O-ring/gasket not included

from

$14.99

The throttle cable bracket is designed for small block Chevy engines thru 1979 and is to be used in conjunction with the kick down cable Pn9886 for the Turbo 350 transmission. The throttle cable bracket mounts on the intake manifold and will hold cables with round or square mounts. It has a 2 inch adjustable range and is finished off in a beautiful chrome plating.

Product Features:

2 in. adjustable range
Includes necessary hardware
Chrome plated
Individually packaged

from

$100.99

Product Features:

Use W/ Valve Springs Part #5822, 5882, 5896, 5872, 5867, 5812, 5857
Set of 16
1.50 in. Outside Diameter
Steel Material
Black Oxide Finish

from

$213.99

Throttle linkage kit for street tunnel ram. Use for sideways mounted carburetors only. Use Holley PN(0-9776) for sideways mounted applications. Not legal for sale or use on pollution controlled motor vehicles.

Product Features:

Throttle Linkage Kit for Street Tunnel Ram
Use for Sideways Mounted Carburetors Only
Use Holley PN[0-9776] For Sideways Mount Apps

from

$458.99

Product Features:

Best for the Ultimate in Street High-Performance
Designed Idle to 5500 RPM Street-Driven Power
Dual-Plane High-Rise Intake w/180 deg Firing Order
Produces Incredible Top-End Horsepower
Retains Good Throttle Response and Acceleration
Larger Plenum and Runners Maximizes Other Upgrades
Edelbrock Total Power Package Maximizes Gains

from

$504.99

Product Features:

Polished Version Of Edelbrock PN[2701]
Polish is Hand-Buffed for Brilliant Shine
Maximizes Performance with Edelbrock Carburetors
Maximizes Peak Torque Around 3500 RPM
Excellent Throttle Response and Mid-Range Power
Prod. +5 HP and +9 ft/lbs. of Torque Over PN[2101]
For Idle to 5500 RPM Street-Driven Performance
Dual-Plane Low-Rise Intake w/180 deg. Firing Order

from

$339.99

Product Features:

For Idle to 5500 RPM Street-Driven Performance
Dual-Plane Low-Rise Intake w/180 Deg Firing Order
Patented Runner Design Ensures Broad Torque Curve
Excellent Throttle Response and Mid-Range Power
50-State Street Legal if Correct Carburetor Used
Accepts Late-Model Choke; Waterneck; and HEI
Accepts A/C And Alternator
Accepts Exhaust Heated Chokes and Accepts EGR

from

$31.99

COMP Cams offers a complete line of valve stem seals, from the umbrella seals to the positive-stop Teflon seal. These seals are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The umbrella seal is normally used when a larger-than-stock diameter spring is used, in the case of a double spring, the positive-stop Teflon seal is used. The umbrella seals require no machining, but with the Teflon seal it is necessary to disassemble the heads and machine the top of the guide with a special .530 diameter cutter. Whenever you are planning an engine overhaul or a cam change, don’t forget the valve seals.

Product Features:

Work with .530″ guides and 3/8″ valve stem diameter
Valve stem oil seals keep unwanted oil from entering the combustion chamber
Several different types of valve seals are offered

from

$29.99

Product Features:

Timing Chain Only

from

$97.99

Product Features:

Solid Bushing Chain Resists Stretching
For Use with Stock or Edelbrock Camshafts
Stressproof Steel Crank Gears
3 Keyway Setting Points To Ensure Accurate Timing
True Bearing Surface Rolls with the Sprockets

from

$37.99

Product Features:

Solid Bushing Chain Resists Stretching
For Use with Stock or Edelbrock Camshafts
Stressproof Steel Crank Gears
3 Keyway Setting Points To Ensure Accurate Timing
True Bearing Surface Rolls with the Sprockets
50 State Street Legal
Not for OEM Hydraulic Roller-Lifter Camshaft Eng.

from

$62.99

Product Features:

Solid Bushing Chain Resists Stretching
For Use with Stock or Edelbrock Camshafts
Stressproof Steel Crank Gears
3 Keyway Setting Points To Ensure Accurate Timing
True Bearing Surface Rolls with the Sprockets
Not for OEM Hydraulic Roller-Lifter Camshaft Eng.

from

$26.99

Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:

Opens At 180 Degrees
Designed to Resist Large Variations of Coolant Pressure at High RPM
Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
For High Performance Street, Drag Race, and Oval Track
Copper & Brass Construction – Resists Corrosion
High Flow

from

$27.49

Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:

Opens At 195 Degrees
Designed to Resist Large Variations of Coolant Pressure at High RPM
Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
For High Performance Street, Drag Race, and Oval Track
Copper & Brass Construction – Resists Corrosion
High Flow

1979 Pontiac Bonneville Performance Engines

More 1979 Pontiac Bonneville Performance Engines

Essential 1979 Pontiac Bonneville Performance Engines

B & M – Torque Converter, Nitrous Holeshot 3000 (Part No.20481)

B & M – Torque Converter, Holeshot 2000 (Part No.70417)

Competition Cams – CAMSHAFT, SBC 249 XTREME ENERGY COMPUTER CONTROLLED HYDRAULIC 1 EA (Part No.12-249-4)

Competition Cams – CAMSHAFT, SBC 252 HIGH ENERGY HYDRAULIC 1 EA (Part No.12-205-2)

Edelbrock – Performer-Plus Camshaft Kit for Pontiac 350-403 V8 (Part No.2157)

Competition Cams – High Energy 212/212 Hydraulic Flat Cam K-Kit for Pontiac 265-455 (Part No.K51-230-3)

Competition Cams – Xtreme Energy 250/256 Hydraulic Flat Cam and Lifter Kit Chevrolet Small Block (Part No.CL12-254-3)

Mr. Gasket – Water Neck (Part No.2667)

Spectre – Water Neck; Chevy Late Model (Part No.4730)

Spectre – Water Neck; Olds (Part No.4733)

Mr. Gasket – Lts Throttle Cable Brkt Chev (Part No.9885)

Edelbrock – Performer Series Retainer (Qty 16) (Part No.9724)

Edelbrock – Side-Mount Throttle Linkage for S/B Chevy #7110 Street Tunnel Ram Manifold (Part No.7071)

Edelbrock – Performer Small Block Oldsmobile 350 Intake Manifold (Part No.7111)

Edelbrock – Performer EPS Intake Manifold for 1955-86 Small-Block Chevy, Polished Finish (Part No.27011)

Edelbrock – Performer Small-Block Chevy Intake Manifold for Street Performance (Part No.3701)

Competition Cams – VALVE SEALS, TEFLON 3/8" 1 ST (Part No.505-16)

Edelbrock – TIMING CHAIN (Part No.7844)

Edelbrock – Performer-Link Adjustable True-Roller Timing Chain Set (Part No.7813)

Edelbrock – Performer-Link Adjustable True-Roller Timing Chain Set (Part No.7802)

Edelbrock – Performer-Link Adjustable True-Roller Timing Chain Set (Part No.7800)

Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)

Mr. Gasket – High Performance Thermostat (Part No.4365)

Popular 1979 Pontiac Bonneville Performance Engines Categories

1979 Pontiac Bonneville Performance Engines

Performance Engines Brands To Make Your 1979 Pontiac Bonneville Last

Popular B & M Performance Engines

Top 1979 Pontiac Bonneville Performance Engines from Mr. Gasket

FAQs for 1979 Pontiac Bonneville Performance Engines

What are the most purchased Performance Engines for the 1979 Pontiac Bonneville?

What are the top-rated 1979 Pontiac Bonneville Performance Engines?

More Popular Parts for All Makes