1979 GMC K3500 Drivetrains

Below you will find various in-demand GMC Drivetrains, components and accessories for your 1979 K3500. Advance Auto Parts has popular K3500 parts like Differentials, 4WD Components, Drive Shafts and Axles and more. You’ll also find aftermarket and OEM Drivetrains for other K3500 model years including 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999 and more. Select a category of 1979 GMC K3500 Drivetrains below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1979 GMC K3500 Drivetrains Categories

Differential Oil

Axle Shaft Universal Joints

U-Joints

4WD Hubs

Rear Differential Cover Gaskets

Miscellaneous CV and U-Joint Parts

Drive Shaft Center Supports

Differential Open Unit and Components

Differential Covers

Center Support Bearings

U-Joint Strap Kits

Differential Pinion Shaft Lock Bolts

Axle Shaft Bearing Assemblies

Differential Bearings

Differential Axle Shafts

Bearing Pullers

Spindle Hub Seals

Axle Shaft Seals

Drive Shaft Slip Yoke Sleeves

Differential Pinion Pilot Bearings

Locking Hub Service Kits

Axle Spindle Seals

U-Joint Centering Yokes

Differential Cover Bolts

Axle Shaft Bearings

Transfer Case Output Shaft Seals

Differential Carriers

Differential Bearing Kits

Input Shaft Bearings

Front Differential Pinion Bearings

Transfer Case Adapters

Differential Spider Gear Kits

Differential Rebuild Kits

Differential Carrier Shim Kits

Differential Pinion Seals

Axle Spindle Bearings

Axle Flange Gaskets

Differential Clutch Packs

Differential Ring and Pinions

Stub Axles

U-Joint U-Bolt Kits

Differential Cases

Differential End Yokes

Spindle Lock Nuts

Differential Lock Assemblies

Axle Spindles

Differential Air System Seal Housings

Differential Spools

Differential Carrier Bearings

Front Differential Cover Gaskets

Rear Housing Cover Gaskets

Axle Hubs

Transfer Case Output Shaft Bearings

Differential Pinion Bearing Kits

Axle Shaft Seal Retainers

Drive Shaft Seals

Axle Shaft Lock C-Clips

Complete Differentials

Bearing and Seal Overhaul Kits

Differential Ring Gear Bolts

Bearing Race Drivers

Differential Carrier Bearing Shims

Axle U-Bolt Kits

Input Shaft Seals

Spindle Retainers

Differential Crush Sleeves

Differential Side Bearing Spacers

Differential Pinion Shims

Differential Pinion Shaft Nuts

Differential Gear Install Kits

Differential Cross Pins

Mounting Adapter Seals

Differential Housing O-Rings

Differential Side Gear Thrust Washers

Differential Pinion Bearing Baffles

Differential Pinion Gear Thrust Washers

Differential Drive Pinion Gear Bearing Retainer Bolts

Differential Drive Pinion Oil Deflectors

Differential Carrier Bolts

Axle Shaft Bolts

Differential Ring and Pinion Kits

Limited Slip Differential Assemblies

Differential Spider and Pinion Gear Kits

Universal Joint Strap Bolts

Differential Clutch Pack Clips

Universal Joint Snap Rings

Essential Drivetrains for 1979 GMC K3500s

from

$18.99

(4) Full Circle snap rings, fits Dana 60 733X U-joint with aftermarket axle.

Product Features:

Set of four full circle snap rings for Dana Spicer 60

from

$126.99

Product Features:

Carrier shim kit
Fits Dana Spicer 70 and 70HD

from

$9.99

Product Features:

Cross pin bolt for Dana Spicer 60 with c-clip axles

from

$317.99

Yukon standard open spider gear kit for 9.5″ GM rear and ’06 and earlier GM 9.25″ IFS with 33 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:

Spider gear kit
Fits GM 9.5″ open differential
Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.

from

$86.99

Product Features:

BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$519.99

Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:

Fits Dana Spicer 80
11.25″ ring gear diameter
37 spline pinion
12 ring gear bolts
4.30 ratio

from

$16.99

Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

from

$32.49

Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$324.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

Fits Dana Spicer 70HD
Included are pinion bearings and races, pinion seal, pinion nut, complete pinion shim kit, and marking compound with brush.

from

$523.99

Each LuK Differential Bearing Kit contains all the OE quality bearings needed for a professional transmission repair. Differential bearing kits are the perfect repair solution for a broken transmission. We carefully select OE quality components for each individual transmission for a professional repair.

Product Features:

LuK Differential Bearing Kits are designed to meet or exceed OEM requirements. This will ensure customer satisfaction.
LuK Differential Bearing Kits contain the bearings and seals needed to complete the job.
LuK Differential Bearing Kits include wear parts such as seals, O-rings, shaft sealing rings, support bearings and spare parts where necessary for eliminating the specific cause of failure.

from

$29.49

The National bearing & seal kit includes all the components required to complete the repair.

Product Features:

COMPLETE SOLUTION – Includes everything needed to complete the repair
STRONG AND DURABLE – Controlled heat treatment process for strength and durability
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Professional technicians know they can depend on National

from

$15.99

Product Features:

Brand may vary by location

from

$86.99

When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.

from

$9.99

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$596.99

For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!

from

$93.99

Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:

CARRIER BEARING KIT FRD 10.5″ W/TIM

from

$5.99

3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.

Product Features:

Cover bolt for Dana Spicer 60, 70 and 80
3/8″

from

$7.99

Dana 60 & Dana 70 Power Lok case bolt.

Product Features:

Power Lok case bolt for Dana Spicer 60 and 70
7/16 x 14 thread
3.5″ long
9/16″ hex head

from

$209.99

Extra large clamshells for use with Dana 70HD, Dana 80, AAM 11.5″, Ford 9.75″, Ford 10.25″ & Ford 10.5″.

Product Features:

Extra Large clamshell
Fits carrier bearing puller

from

$13.99

This transfer case adapter seal matches the fit and function of worn or damaged original equipment part. This seal should be replaced as part any service that requires the transfer case and transmission to be separated.

Product Features:

Ideal replacement – this transfer case adapter O-ring is a direct replacement for a worn or damaged original equipment seal between the transfer case and transmission
Convenient on-hand part – this seal should be replaced whenever the transfer case is removed for service
Application-specific design – this O-ring has been designed of durable materials specifically for this vehicle application
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life

from

$241.99

Demand genuine Spicer. Dana design, engineering, testing and manufacturing processes all work in conjunction with one another to ensure unparalleled performance that non-genuine parts simply cannot deliver.

Product Features:

Genuine OE quality. Tested and proven.
Built to meet OE standards set by Dana
Tested and validated to rigorous OE specifications
Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace

from

$12.99

Product Features:

CRUSH SLEEVE 14 BOLT 10.5 (3124) 1989 UP MIN ORDER 1000

from

$181.99

Dana 60 & Dana 70 Power Lok clutch set (steel & fiber).

Product Features:

Clutch kit
Fit Dana Spicer 60, 70, 70U and 70HD Powr Lok positraction

from

$98.99

The components in this leaf spring axle U-bolt kit are designed to securely hold the leaf spring or leaf spring bundle to the underside of an axle of a vehicle or trailer. Check the leaf spring dimensions and other relevant application details to select the right type and size U-bolt kit for your needs.

Product Features:

Reliable hardware – the components in this leaf spring axle U-bolt kit are designed to securely hold the leaf spring or leaf spring bundle to the underside of a vehicle or trailer axle
Check fit – carefully review the dimensions of the leaf springs that will be used and other relevant application details to select the right type and size U-bolt kit for your needs
Durable construction – the components in this kit are engineered from quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$19.99

Ensure a leak-free repair when servicing axle bearings or parking brake shoes. This axle shaft flange seal is a direct replacement for the original gasket and should be replaced every time work is performed at the axle flange.

Product Features:

Ideal replacement – this axle shaft flange seal directly replaces the original gasket without having to visit the dealer
Required for routine service – this gasket should be replaced every time work is performed at the axle flange
Durable construction – this axle shaft flange gasket is made of tough, durable materials for leak-free performance
Quality tested – this flange gasket has been designed and tested for a guaranteed fit

from

$22.99

Product Features:

RIGHT TYPE: Needle bearings are application-specific for the repair occasion, using either caged or full complement designs
PREMIUM MATERIALS: Precision manufactured using high-quality materials for outstanding durability and performance
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$14.99

Dana 60 semi-float C-clip.

Product Features:

C-clip
Fits Dana Spicer 60

from

$1204.99

The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker is a mechanical locking differential. It features a forged case and 8620 internals for maximum strength. It’s patented design reduces common locker failures. All units assembled in the USA! All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts and associated labor, up to $2,000! This is a narrow case locker. If you have a wide housing, please order two DS 42563 with your locker. This locker is ABS compatible.

Product Features:

Fits Dana Spicer 60 with 30 spline axles
4.56 and up ratio only
Patented internal design reduces common locker failures
8620 internals for added strength
Assembled in the USA

Upgrade your 1979 GMC K3500 with Top-Quality Drivetrains

When it comes to maintaining or upgrading your 1979 GMC K3500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Drivetrains are key to keeping your K3500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 460 Drivetrains for the 1979 GMC K3500, designed to meet your needs without breaking the bank. From Differential replacements to 4WD Components upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 1979 GMC K3500 at great prices. Our Drivetrains inventory for this model ranges from just $1.89 to $2,130.00, with an average price of $254.83. Our 460 Drivetrains in stock come from 20 trusted brands, so you’re sure to find the right part for your 1979 GMC K3500 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1979 GMC K3500, we stock popular OEM and aftermarket Drivetrains from top names like Felpro, Moog, National, and more. Felpro Drivetrains start at just $5.79 and boast an impressive 4.6 stars average rating from customers. Moog and National also bring quality to the table, with Drivetrains available starting at $12.99, and at an average 4.5 stars rating. With 5,895 customer reviews and counting, our 1979 GMC K3500 Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1979 GMC K3500 is always ready to roll. We’re committed to providing you with everything you need to keep your K3500 in top shape, all in one place. Start shopping confidently below for your 1979 GMC K3500!

Best-Selling Differentials for 1979 GMC K3500s

Enhance the driving experience in your GMC with 320 quality Differential components, starting at $1.89.

show more show less

from

$35.99

Valvoline MaxLife Multi-Vehicle ATF is a full-synthetic formulation with advanced additives to prevent the major causes of transmission breakdown and help extend transmission life. Developed to help prevent leaks, maximize transmission performance, reduce transmission wear, and maintain smooth shifting longer than conventional fluids. It is suitable for use in a broad range of ATF applications including most Ford, GM, Toyota, Honda, Nissan, Hyundai, BMW, Mercedes, Volvo, VW & Audi. Recommended for use in the following applications: GM DEXRON-II, DEXRON-III, DEXRON-VI, Ford MERCON LV, Toyota/Lexus Type T, T-II, T-IV, WS, Honda/Acura, ATF-Z1, Nissan/Infiniti Matic-D, Matic-J, Matric-K, Matic-S, Hyundai/Kia SP-II, SP-III, SP-IV, SPH-IV, BMW 7045E, ETL 8072B, LA2634, LT71141, Allison C-4, Mercedes Benz NAG-1, Volvo 1161521, 1161540, 97340, 1273.41, and VW/Audi G-052-025-A2, G-052-162-A1. For CVT applications Valvoline recommends Valvoline Full Synthetic CVT Fluid.

Product Features:

Formulated with full-synthetic base oils and long life friction modifiers to help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks in high mileage transmissions
Developed with anti-wear technology to help improve transmission durability
Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

from

$12.99

Valvoline High Performance Gear Oil is an extreme pressure gear lubricant formulated with quality base oils and superior additives that helps protect against severe temperatures, shock loads, scuffing, scouring, corrosion and pitting in high speed, high load, high torque and high horsepower conditions.

Product Features:

Formulated for reliable gear protection
Protects against severe temperatures to help extend service life
Formulated with extreme-pressure additives to minimize gear wear from shock loads
Helps protect against gear wear from scuffing, scouring, corrosion and pitting
Recommended for conventional hypoid differentials and non-synchronized manual transmissions in passenger cars, light trucks, sport utility vehicles, vans and heavy-duty trucks where an API-GL5 or GL-4 fluid is specified
PLEASE NOTE: Valvoline recommends SynPower Full Synthetic Gear Oil for limited slip differentials

from

$13.99

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$17.99

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$43.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool

from

$8.29

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$245.99

Product Features:

DANA-70 R/P 4.10 STD MG 72154-5X .625″ OFFSET

from

$9.49

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$57.99

3 Qt. Penzoil 80W90 conventional gear Oil. W/ bottle of Posi additive.

Product Features:

Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive

from

$44.99

3 Qt. Penzoil 80W90 conventional gear Oil.

Product Features:

Includes three quarts of conventional oil

from

$5.99

3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.

Product Features:

Cover bolt for Dana Spicer 60, 70 and 80
3/8″

from

$4.99

Replacement ring gear bolt for Dana 60, 70, 70U & 70HD, 1/2″ x 18.

Product Features:

Ring gear bolt for Dana Spicer 60, 70, 70U and 70HD
1/2″ x 18 thread

from

$8.99

Product Features:

Clutch guide for Chrysler 9.25″, Dana Spicer 44 and Dana Spicer 60
For Trac Loc positraction applications only

from

$17.49

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$117.99

Product Features:

PINION YOKE
CAST:1310
U-BOLT STYLE

from

$37.99

Replacement redi-sleeve yoke saver for 8.75″ c, 9.25″ c, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD .Yukon Mighty seal.

Product Features:

Redi-Sleeve yoke saver
Fits Chrysler 8.75″ and 9.25″ rear, Dana Spicer 60, 70, 70U and 70HD

from

$37.99

Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$11.29

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$13.99

Product Features:

Carrier shim kit for Dana Spicer 60, 70, 70HD, 70U and 80

from

$148.99

Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

Product Features:

Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive

from

$19.99

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$16.49

from

$6.99

Product Features:

DANA PRELOAD SHIMS (D60 & D70)

from

$19.99

Product Features:

Pinion preload shims for Dana Spicer 60 and 70U

Most Popular 1979 GMC K3500 4WD Components

Customize your GMC with 3 4WD Components products like 4WD Hubs, all priced under $379.99.

show more show less

from

$204.99

Ultimate in style and service. Latest patented technology. Smooth operation. Limited lifetime warranty. 10 spline, 6 bolts. Chrome.

Product Features:

Ultimate In Style And Service
Latest Patented Technology
Smooth Operation
Limited Lifetime Warranty

from

$323.99

Product Features:

Ideal For OEM Hub Replacement
4140 Steel Clutch Ring
Inner Drive Gear
Precision Cast Hub Body

from

$379.99

These heavy-duty lockouts feature all steel construction, including Chrome-Moly internals, for the ultimate in durability & strength. The hubs will not disengage under high torque applications and defaults to the locked position under use. Engagement comes from just a 1/3 turn of the all-steel, low-profile bezel. The Yukon Hardcore locking hubs are not only great looking, but features a low-profile design to minimize impact with obstacles, and a proprietary coating on the locking gears for decreased friction & long life. Yukon Hardcore Locking Hubs come with a Limited Lifetime warranty against manufacturer’s defect. This is a hub kit for one side only. This locking hub set will not fit housings with Bill of Materials numbers 610033-2, 3, 5 or 6.

Product Features:

Fits 1979-1991 GM, 1978-1997 F350 and 1979-1993 Dodge one ton fronts with Dana Spicer 60
35 spline
All steel construction
Chromoly internals for added strength
Low profile bezel to reduce impact with obstacles
Defaults to locked position
1/3 turn from disengaged to engaged

Top Picks for 1979 GMC K3500 Drive Shafts and Axles

Upgrade GMC K3500s with top-quality Drive Shafts and Axles parts, including 42 OEM and aftermarket selections for your 1979 model.

show more show less

from

$38.99

You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you are getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.

from

$40.99

Anchor 6038 Center support bearings support a driveshaft between transmission and differential. This mount relieves stress on driveline components. Each part is engineered and designed to OE Standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
For Years: 1955-2018
Weight approx: 4 Lbs
BEARING ID / BORE: 1.5750 In. / 40 mm
CENTERLINE: 2.48 In. / 63 mm
Mount Width: 6.62 In. / 168 mm
Style: Round Frame
Not Pictured: Two Dust Shields

from

$45.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool

from

$5.79

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$24.99

Manufactured with premium-grade steel, National cylindrical bearings are designed and engineered to meet OE specifications.

Product Features:

STRONG AND DURABLE: Controlled heat treatment process for strength and durability
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for durability and performance
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
Professional technicians know they can depend on National

from

$6.99

This drive axle shaft lock C-clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this drive axle shaft lock C-clip matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$44.99

OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
Zerk allows for lubricating at regular intervals to help extend the life of the part.

from

$86.99

from

$45.99

from

$58.99

Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.

Product Features:

BUILT TO LAST – Advanced heat treatment process for strength
PREMIUM MATERIALS – Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE – Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$21.99

Anchor 6056 Center support bearings support a driveshaft between transmission and differential. This mount relieves stress on driveline components. Each part is engineered and designed to OE Standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
For Years: 1955-2018
Weight approx: 3 Lbs
BEARING ID / BORE: 1.3780 In. / 35 mm
CENTERLINE: 2.28 In. / 58 mm
Mount Width: 6.62 In. / 168 mm
Style: Round Frame
Complete Mount

from

$18.99

Replacement Inner axle seal for Dana 60 front.Yukon Mighty seal.

Product Features:

Front inner axle seal
Fits Dana Spicer 60 front

from

$13.99

Full-floating axle seal for GM 14T.Yukon Mighty seal.

Product Features:

Rear axle seal
Fits GM 10.5″ 14 bolt truck

from

$13.49

Anchor 6035 Center support bearings support a driveshaft between transmission and differential. This mount relieves stress on driveline components. Each part is engineered and designed to OE Standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
For Years: 1955-2002
Weight approx: 2 Lbs
BEARING ID / BORE: 1.1811 In. / 30 mm
CENTERLINE: 3.50 In. / 89 mm
Mount Width: 1.50 In. / 38 mm
Complete Mount

from

$249.99

Yukon yoke for GM 10.5″ 14 bolt truck, 1350, strap style. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits GM 10.5″ 14 bolt truck
30 spline
1350 u-joint size
3.625″ snap ring span
1.188″ cap diameter
Outside snap ring design
Strap style

from

$299.99

Yukon yoke for GM 10.5″ 14 bolt truck, 1410, strap style. 4.188″ snap ring span, 1.188″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits GM 10.5″ 14 bolt truck
30 spline
1410 u-joint size
4.188″ snap ring span
1.188″ cap diameter
Outside snap ring design
Strap style

from

$30.49

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool

from

$5.29

Anchor 6027 Center support bearings support a driveshaft between transmission and differential. This mount relieves stress on driveline components. Each part is engineered and designed to OE Standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
For Years: 1955-2012
Weight approx: 1 Lbs
Cushion insert only
For complete mount see part 6056

from

$7.99

Product Features:

Pinion yoke dust shield
Fits Dana Spicer 60 and 70

from

$25.49

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$414.99

Yukon billet replacement yoke for Dana 60 and 70 with 29 spline pinion and a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Dana Spicer 60 and 70
29 spline
1350 u-joint size
Outside snap ring design
3.625″ snap ring span
1.188″ cap diameter
U-bolt style

from

$298.99

Yukon 4340 Chrome-Moly axles provide up to 50% increased strength over stock axles for use in extreme performance applications with large tires and high horsepower. Yukon’s 4340 axles are manufactured using the latest technologies and the highest quality materials to ensure high strength and long life. Limited Lifetime warranty covers manufacturing defects and axle breakage for as long as you own the vehicle. This warranty is not transferable to another party. “No Questions Asked” replacement for first warranty return, however Yukon reserves the right to either replace axle or refund original purchase price after the first warranty claim. Yukon (through Randy’s ring & pinion) makes final determination on warranty considerations.

Product Features:

Fits Dana Spicer 60 front in GM and Dodge trucks
4340 Chromoly
Outer stub
30 spline
12″ from end of splines to center of u-joint bore

from

$298.99

Yukon 4340 Chrome-Moly replacement outer stub for Dana 60 and 70 with a length of 12″ and 35 splines. Yukon 4340 Chrome-Moly axles provide up to 50% increased strength over stock axles for use in extreme performance applications with large tires and high horsepower. Yukon’s 4340 axles are manufactured using the latest technologies and the highest quality materials to ensure high strength and long life. Limited Lifetime warranty covers manufacturing defects and axle breakage for as long as you own the vehicle. This warranty is not transferable to another party. “No Questions Asked” replacement for first warranty return, however Yukon reserves the right to either replace axle or refund original purchase price after the first warranty claim. Yukon (through Randy’s ring & pinion) makes final determination on warranty considerations.

Product Features:

Fits Dana Spicer 60 front in GM and Dodge trucks
4340 Chromoly
Outer stub
35 spline
12″ from end of splines to center of u-joint bore

from

$271.99

Yukon replacement yoke for Dana 60 and 70 with a 1330 U/joint size. 3.625″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects. This is a u/bolt style yoke.

Product Features:

Fits Dana Spicer 60 and 70
29 spline
1330 u-joint size
Outside snap ring design
3.625″ snap ring span
1.062″ cap diameter
U-bolt style

In-Demand Transfer Cases for 1979 GMC K3500s

Select from 21 premium Transfer Cases parts for your 1979 GMC K3500, with prices ranging from $4.99 to $244.99.

show more show less

from

$12.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$12.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$30.49

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$37.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool

from

$7.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$11.49

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$43.49

Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$20.49

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$4.99

Product Features:

Design type: spring loaded; single-lip
Temperature range: -40 deg. F to 225 deg. F / -40 deg. C to 107 deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$17.49

Product Features:

Brand may vary by location

from

$18.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$43.99

Product Features:

BUILT TO LAST: Advanced heat treatment process for strength
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$10.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$8.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$94.99

Product Features:

BUILT TO LAST: Advanced heat treatment process for strength
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$244.99

TCaseBrg-SealKit

from

$242.99

TCaseBrg-SealKit

from

$171.99

For owners of 4 wheel drive vehicles, here is a selection of products that allow for a variety of conversions. Count on these kits to reduce wear and tear on your drive train as well as saving at the gas pump. In some cases, these are the only kits available for your vehicle. In all cases, each kit has been carefully designed to provide years of trouble free service.

Product Features:

Reduces Wear And Tear On Drivetrain
Designed To Provide Years Of Trouble Free Service

from

$89.99

Reduces Wear And Tear On Drivetrain
Designed To Provide Years Of Trouble Free Service

from

$89.99

Product Features:

BUILT TO LAST: Advanced heat treatment process for strength
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$10.99

Design type: spring loaded; single-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

Most Sold 1979 GMC K3500 Universal Joints

Explore our best-selling GMC parts for the 1979 K3500 among 56 OEM and aftermarket options starting from $5.39.

show more show less

from

$67.99

Product Features:

BUILT TO LAST – Rugged design specifically engineered for fleets, off-highway and commercial vehicles
STRONG AND DURABLE – Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
GREASEABLE DESIGN – Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
INHIBITS PREMATURE WEAR – Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
RELIABLE PERFORMANCE – Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$31.99

OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
Zerk allows for lubricating at regular intervals to help extend the life of the part.

from

$29.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

For U-Joints 330, 330A, 331 & 331A
Contains two 1.66″ bolt center clamps and four 5/16-24 x 1-5/16″ cap screws

from

$23.99

For U-Joints 353, 354, 361, 369 & 497
Fits 1-1/16″ bearings

from

$15.99

Driveworks Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. Driveworks Universal Joints are constructed from quality materials for extended durability. Driveworks Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:

The cross is hot forged for the higher torque and horsepower
The bearing cups are made by cold forging, having higher strength and better rigidity
Bearing cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
Lubrication grooves are designed to ensure grease penetration to entire journal and needle bearings
Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
Snap rings are held to strict tolerances to ensure proper cup position and retention
Nitrile rubber seals to optimize grease retention and reduce contamination

from

$35.99

Product Features:

BUILT TO LAST – Rugged design specifically engineered for fleets, off-highway and commercial vehicles
STRONG AND DURABLE – Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
GREASEABLE DESIGN – Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
INHIBITS PREMATURE WEAR – Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
RELIABLE PERFORMANCE – Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$33.99

Product Features:

BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$41.49

Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
GREASEABLE DESIGN – Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$33.99

The cross is hot forged for the higher torque and horsepower
The bearing cups are made by cold forging, having higher strength and better rigidity
Bearing cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
Lubrication grooves are designed to ensure grease penetration to entire journal and needle bearings
Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
Snap rings are held to strict tolerances to ensure proper cup position and retention
Nitrile rubber seals to optimize grease retention and reduce contamination

from

$37.99

Backed by superior materials and rigorous testing, MOOG Super Strength® universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
GREASEABLE DESIGN – Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$15.99

The cross is hot forged for the higher torque and horsepower
The bearing cups are made by cold forging, having higher strength and better rigidity
Bearing cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
Lubrication grooves are designed to ensure grease penetration to entire journal and needle bearings
Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
Snap rings are held to strict tolerances to ensure proper cup position and retention
Nitrile rubber seals to optimize grease retention and reduce contamination

from

$15.99

The cross is hot forged for the higher torque and horsepower
The bearing cups are made by cold forging, having higher strength and better rigidity
Bearing cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
Lubrication grooves are designed to ensure grease penetration to entire journal and needle bearings
Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
Snap rings are held to strict tolerances to ensure proper cup position and retention
Nitrile rubber seals to optimize grease retention and reduce contamination

from

$31.49

Product Features:

BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$41.99

Product Features:

BUILT TO LAST – Rugged design specifically engineered for fleets, off-highway and commercial vehicles
STRONG AND DURABLE – Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
GREASEABLE DESIGN – Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
INHIBITS PREMATURE WEAR – Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
RELIABLE PERFORMANCE – Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$16.99

This universal joint strap kit is designed to match the original components required to repair and resecure universal joints on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this universal joint strap kit is designed to match the original components required to repair and resecure universal joints on specified vehicles
Ideal solution – this kit is a reliable replacement for original components that are missing or have failed due to fatigue
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$5.39

Universal Joint

from

$7.49

Direct replacement – this universal joint strap kit is designed to match the original components required to repair and resecure universal joints on specified vehicles
Ideal solution – this kit is a reliable replacement for original components that are missing or have failed due to fatigue
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$167.99

Machined bodies to meet the tight tolerances
Forged and cast material to meet the performance requirement
Minimize the flash lines for less interference
Cleaning process induces compressive strength for increased performance
Machined and threaded holes for mounting ease
Rust preventative added for longer shelf life

from

$29.99

Product Features:

Adapter sleeve
Fits GM 10.5″ 14 bolt truck and GM 11.5″
Converts to triple lip seal

from

$86.99

Product Features:

BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$7.49

This universal joint U-bolt kit is designed to match the original components required to repair and resecure universal joints on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this universal joint U-bolt kit is designed to match the original components required to repair and resecure universal joints on specified vehicles
Ideal solution – this kit is a reliable replacement for original components that are missing or have failed due to fatigue
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$44.99

Yukon 1310 U/Joint with zerk fitting on cross. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring.

from

$99.99

BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
GREASEABLE DESIGN – Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$59.99

Yukon 1310 to 1330 adapter U/Joint. The 1310 side has a 3.219″ span and 1.062″ caps. The 1330 side has a 3.625″ span and 1.062″ caps. Both sides are outside snap ring.

Top-Rated Drivetrains Brands For Your 1979 GMC K3500

Shop for the best-rated brands offering Drivetrains and other products for your 1979 GMC K3500s. Below you’ll find some of our best rated Drivetrains from Felpro, Moog, and National, and more. Drivetrains from these brands that fit a 1979 K3500 start at just $5.79 and are rated as high as 4.6 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.

Popular Felpro 1979 GMC K3500 Drivetrains

When it comes to maintaining or upgrading your 1979 GMC K3500, using quality Drivetrains is essential to ensure durability and a perfect fit. Felpro ticks all of those boxes. We offer a wide selection of Felpro Drivetrains, specifically designed for the 1979 GMC K3500. With over 3 Felpro brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $5.79, with an average price of just $10.69. Plus, with over 25 customer reviews and an average rating of 4.6 stars, you can trust that our Felpro Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $17.99

(1)

Axle Housing Cover Gasket Irregular Shaped 10 Bolt Hole Gasket

“OEM only uses silicone , the gasket set with a thin layer of silicone is a much better sealant method”

from $5.79

(11)

Drive Axle Shaft Flange Gasket 8 Bolt Hole Gasket, 2.719 Inch Inside Diameter, 4.438 Inch Outside Diameter

“The product was exact fit to the original and was great priced as well.”

from $8.29

(13)

Axle Housing Cover Gasket: Irregular Shaped 14 Bolt Hole Gasket

“works good”

Popular Moog 1979 GMC K3500 Drivetrains

Moog auto parts is one of the highest quality Drivetrain brands in the market. Any 1979 GMC K3500 owner should feel confident when installing genuine Moog parts in their vehicle. To ensure the best fit and performance for your 1979 K3500, Advance Auto Parts carries a full inventory of 3 Moog Drivetrains. Plus you will be keeping your GMC in peak condition while saving money because prices on these Moog Drivetrains range from $23.99 to $67.99, plus, with more than 31 customer reviews and an impressive 4.5 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.

from $29.99

(2)

Universal Joint Strap Kit

“Fit just like new. One difference I noticed was that the thread ran up the bolt farther but I doubt that will effect performance.”

from $23.99

(4)

Universal Joint U-Bolt Kit

“I used these to replace the factory originals that had over 80K miles on a 1964 Chevelle Malibu. I had a strange click in the differential area and s”

from $67.99

(25)

Greaseable Premium Universal Joint

“I trust Moog I’m sure it will be on my truck for a while.”

FAQs for 1979 GMC K3500 Drivetrains

Which Drivetrains are best-sellers for 1979 GMC K3500s?

Out of 460 Drivetrains that fit 1979 GMC K3500s, the following parts are the top sellers:

Greaseable Premium Universal Joint (10086900) – $35.99
Greaseable Super Strength Universal Joint (10086947) – $37.99
Universal Joint (10265714) – $15.99

What’s the price range for 1979 GMC K3500 Drivetrains?

Drivetrain prices for the 1979 GMC K3500 start at $1.89 and go up to $2,130.00 for the most premium parts.

What’s the average price of a Drivetrain for a 1979 GMC K3500?

The average price for Drivetrains for the 1979 GMC K3500 is $254.83. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Drivetrains for other GMC K3500 model years?

Yes, we currently carry Drivetrains for 18 model years of GMC K3500s between 1980 and 1999. Drivetrains are bought most frequently for the following model years: 1999, 1998, 1997, 1996, 1995, 1994, 1993, 1992, and 1991.

What are the cheapest Drivetrains for my 1979 GMC K3500?

The cheapest 1979 GMC K3500 Drivetrains we carry in stock are:

Differential Ring Gear Bolt (10282457) – $1.89
Multi-Purpose Seal (3270890) – $3.99
Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement (11643194) – $3.99
Multi Purpose Seal (18444966) – $4.99
Replacement Ring Gear Bolt For Dana 60, 70, 70U & 70HD, 1/2" X 18 (11643357) – $4.99

What are the top-rated Drivetrains that fit the 1979 GMC K3500?

Out of 5,895 reviews by customers, our 1979 GMC K3500 Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 1979 GMC K3500 and their top-rated products:

Spindles
- Multi-Purpose Bearing (3279677) – $24.49
- Wheel Bearing and Seal Kit (3279405) – $29.49
Universal Joints
- Multi-Purpose Bearing (3279677) – $24.49
- Wheel Bearing and Seal Kit (3279405) – $29.49
4WD Components
- Multi-Purpose Bearing (3279677) – $24.49
- Wheel Bearing and Seal Kit (3279405) – $29.49

What types of Drivetrains do you sell for my 1979 GMC K3500?

As of 3/1/26, these are some of the most in-demand types of Drivetrains for a 1979 GMC K3500:

Can I get help with 1979 GMC K3500 Drivetrain orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Drivetrains and more.

What is your return policy for GMC K3500 Drivetrains?

Advance Auto Parts keeps returns simple. For new GMC K3500 Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1979 GMC K3500 Drivetrains

Yukon Gear – (4) Full Circle Snap Rings, Fits Dana 60 733X U-Joint With Aftermarket Axle (Part No.32085)

Yukon Gear – Replacement Carrier Shim Kit For Dana 70 & 70HD (Part No.55019)

Yukon Gear – 9.25" Chrysler, Dana 60 Semi-Float X/P Bolt, 80 & Up, 5/16" Head, Tapered Shoulder (Part No.33238)

Yukon Gear – Standard Open Spider Gear Kit For 33 Spline GM 9.25" IFS And GM 9.5" Axles (Part No.16060)

MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.271)

Yukon Gear – High Performance Replacement Ring & Pinion Gear Set For Dana 80 In A 4.30 Ratio (Part No.24081)

Motive Gear – Drive Axle Shaft Seal (Part No.710281)

Schaeffler – Shaft Seal (Part No.SS3147)

Yukon Gear – Pinion Install Kit For Dana 70-HD & Super-70 Differential (Part No.13034)

LuK – Repair Kit, Differential (Part No.GDK324)

National – Wheel Bearing and Seal Kit (Part No.SBK-3)

Driveworks – Clutch Release Bearing (Part No.S-B-2610)

Spicer – Universal Joint (Part No.SPL55-3X)

Victor Reinz – Differential Cover Gasket (Part No.71-14868-00)

Powertrax – Grip PRO Traction System (Part No.GT436035)

Motive Gear – Differential Carrier Bearing Kit – Timken (Part No.R10.5CKT)

Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)

Yukon Gear – Dana 60 & Dana 70 Power Lok Case Bolt (Part No.33236)

Yukon Gear – Extra-Large Clamshells For Large Applciations (Part No.56059)

Dorman – Transfer Case Adapter O-Ring (Part No.926-832)

Spicer – Pinion Shaft End Yoke (Part No.10025494)

Motive Gear – Differential Crush Sleeve (Part No.26008741)

Yukon Gear – Dana 60 & Dana 70 Power Lok Clutch Set (Steel & Fiber) (Part No.16155)

Dorman – U-Bolt Repair Kit (Part No.929-836)

Dorman – Axle Flange Gasket Kit (Part No.926-900)

National – Multi-Purpose Bearing (Part No.B-2012)

Yukon Gear – Dana 60 Semi-Float C-Clip (Part No.33247)

Yukon Gear – Grizzly Locker For Dana 60, 4.56 & Up, 30 Spline (Part No.28004)

Valvoline – MaxLife Multi-Vehicle Automatic Transmission Fluid, 1 Gallon (Part No.773775)

Valvoline – High Performance Transmission & Differential Gear Oil: Conventional 80W-90, 1 Quart (Part No.VV831)

National – Bearing Race (Part No.382A)

Felpro – Axle Housing Cover Gasket Irregular Shaped 10 Bolt Hole Gasket (Part No.RDS 6014)

National – Shaft Repair Sleeve (Part No.99193)

Felpro – Axle Housing Cover Gasket: Irregular Shaped 14 Bolt Hole Gasket (Part No.RDS 55063)

Motive Gear – Differential Ring and Pinion (Part No.D70-410)

Felpro – Axle Housing Cover Gasket Irregular Shaped 10 Bolt Hole Gasket (Part No.RDS 6095-1)

Yukon Gear – 3 Qt – 80W90 Conventional Gear Oil With Posi Additive (Part No.15003)

Yukon Gear – 3 Qt – Penzoil 80W90 Conventional Gear Oil (Part No.15002)

Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)

Yukon Gear – Replacement Ring Gear Bolt For Dana 60, 70, 70U & 70HD, 1/2" X 18 (Part No.33037)

Yukon Gear – Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement (Part No.33249)

National – Multi-Purpose Seal (Part No.9316)

Motive Gear – Drive Shaft Pinion Yoke (Part No.MG1310-6010)

Yukon Gear – Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD (Part No.30228)

National – Tapered Roller Bearing Cone (Part No.HM803146)

National – Bearing Race (Part No.HM88510)

Yukon Gear – Replacement Carrier Shim Kit For Dana 60, 70, 70HD, 70U & 80 (Part No.55011)

Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)

National – Bearing Race (Part No.HM803110)

Motive Gear – Differential Pinion Seal (Part No.9316)

Motive Gear – Differential Pinion Shim Kit (Part No.1118)

Yukon Gear – Replacement Pinion Preload Shims For Dana 60, Dana 61 & Dana 70-U (Part No.55015)

Milemarker – MileMarker Supreme; Manual Hub (Part No.104)

Warn – Hubs – 4WD (Part No.11690)

Yukon Gear – Hardcore Locking Hub For Dana 60, 35 Spline – ’79-’91 GM, ’78-’97 Ford, ’79-’93 Dodge, 1 Side (Part No.29088)

Spicer – Universal Joint (Part No.5-1310X)

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6038)

National – Shaft Repair Sleeve (Part No.99174)

Felpro – Drive Axle Shaft Flange Gasket 8 Bolt Hole Gasket, 2.719 Inch Inside Diameter, 4.438 Inch Outside Diameter (Part No.55350)

National – Wheel Bearing (Part No.5707)

Dorman – Help – Axle Shaft Lock Assortment (Part No.81050)

Spicer – Universal Joint, Greaseable 1350 Series (Part No.5-178X)

Spicer – Universal Joint (Part No.SPL55-3X)

Spicer – Universal Joint (Part No.5-1350X)

National – Drive Shaft Center Support Bearing (Part No.HB-88508-AA)

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6056)

Yukon Gear – Replacement Inner Axle Seal For Dana 60 Front (Part No.30082)

Yukon Gear – Full-Floating Axle Seal For GM 14T (Part No.30018)

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6035)

Yukon Gear – Yoke For GM 10.5" 14 Bolt Truck, 1350, Strap Style (Part No.41179)

Yukon Gear – Yoke For GM 10.5" 14 Bolt Truck, 1410, Strap Style (Part No.41180)

National – Shaft Repair Sleeve (Part No.99125)

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6027)

Yukon Gear – Pinion Yoke Dust Shield For Dana 60 & 70 (Part No.33441)

National – Multi-Purpose Seal (Part No.470682)

Yukon Gear – Billet Replacement Yoke For Dana 60 And 70 With 29 Spline Pinion And A 1350 U/Joint Size (Part No.41138)

Yukon Gear – 4340 Chrome-Moly Outer Stub Replacement For Dana 60 (Part No.21376)

Yukon Gear – 4340 Chrome-Moly Replacement Outer Stub For Dana 60 And 70 (Part No.21373)

Yukon Gear – Replacement Yoke For Dana 60 And 70 With A 1330 U/Joint Size (Part No.41025)