1979 Chevrolet Corvette Bodies and Fender Parts
More 1979 Chevrolet Corvette Bodies and Fender Parts
Find your specific 1979 Chevrolet Corvette original or aftermarket Bodies and Fender Parts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1979 Chevrolet Corvette Bodies and Fender Parts
Covercraft – Two-Piece Front End Cover – Vinyl, Black (Part No.MM42409)
from
$129.99
Covercraft’s Custom Mask provides protection to your vehicle’s nose. These front end covers are a sporty way to protect your vehicle from road hazards. Tar, rocks and bugs cause paint chips, dents and dings to your vehicle’s finish. A Custom Mask helps protect the value of your vehicle for years to come. Made from high-quality vinyl that is quick drying. Will not damage your paint or finish. Two-piece design full front end mask, Fits the curves and contours of your specific vehicle, Dries itself while you drive, Installs easily in minutes, Shrink and fade resistant, 90-day warranty.
Product Features:
See More
Product Features:
- Full Front Area Protection
- Protects Against Bugs, Rock Chips
- Hood Opens with Mask In Place (MM Series)
- Heavy Duty Vinyl with Soft Fleece Back
- Custom Patterned for Easy Installation
- Warranty: 90 Days
Covercraft – Traditional One-Piece Front End Cover – Vinyl, Black (Part No.M401)
from
$109.99
Covercraft’s traditional one-piece hood mask is a specialty cover that retains the installation and protection originally designed. This made them easy to use at the factory test track. Over the years, mask designs have evolved into a two-piece style, but Covercraft has retained some patterns for older specialty vehicles that are in the one-piece design.
Product Features:
See More
Product Features:
- Traditional One-piece styling design
- For older specialty vehicles
- Easy installation and maximum protection
- Protects the area of the car that takes the most abuse
- Micro-perforated finish on vinyl allows mask to breathe
- Moisture vapor evaporates and doesn’t stay trapped
Covercraft – Two-Piece Front End Cover – Vinyl, Black (Part No.MM42405)
from
$129.99
Covercraft’s Custom Mask provides protection to your vehicle’s nose. These front end covers are a sporty way to protect your vehicle from road hazards. Tar, rocks and bugs cause paint chips, dents and dings to your vehicle’s finish. A Custom Mask helps protect the value of your vehicle for years to come. Made from high-quality vinyl that is quick drying. Will not damage your paint or finish. Two-piece design full front end mask, Fits the curves and contours of your specific vehicle, Dries itself while you drive, Installs easily in minutes, Shrink and fade resistant, 90-day warranty.
Product Features:
See More
Product Features:
- Full Front Area Protection
- Protects Against Bugs, Rock Chips
- Hood Opens with Mask In Place (MM Series)
- Heavy Duty Vinyl with Soft Fleece Back
- Custom Patterned for Easy Installation
- Warranty: 90 Days
Covercraft – Two-Piece Front End Cover – Vinyl, Black (Part No.MM42402)
from
$129.99
Covercraft’s Custom Mask provides protection to your vehicle’s nose. These front end covers are a sporty way to protect your vehicle from road hazards. Tar, rocks and bugs cause paint chips, dents and dings to your vehicle’s finish. A Custom Mask helps protect the value of your vehicle for years to come. Made from high-quality vinyl that is quick drying. Will not damage your paint or finish. Two-piece design full front end mask, Fits the curves and contours of your specific vehicle, Dries itself while you drive, Installs easily in minutes, Shrink and fade resistant, 90-day warranty.
Product Features:
See More
Product Features:
- Full Front Area Protection
- Protects Against Bugs, Rock Chips
- Hood Opens with Mask In Place (MM Series)
- Heavy Duty Vinyl with Soft Fleece Back
- Custom Patterned for Easy Installation
- Warranty: 90 Days
Covercraft – Two-Piece Front End Cover – Vinyl, Black (Part No.MM42499)
from
$129.99
Covercraft’s Custom Mask provides protection to your vehicle’s nose. These front end covers are a sporty way to protect your vehicle from road hazards. Tar, rocks and bugs cause paint chips, dents and dings to your vehicle’s finish. A Custom Mask helps protect the value of your vehicle for years to come. Made from high-quality vinyl that is quick drying. Will not damage your paint or finish. Two-piece design full front end mask, Fits the curves and contours of your specific vehicle, Dries itself while you drive, Installs easily in minutes, Shrink and fade resistant, 90-day warranty.
Product Features:
See More
Product Features:
- Full Front Area Protection
- Protects Against Bugs, Rock Chips
- Hood Opens with Mask In Place (MM Series)
- Heavy Duty Vinyl with Soft Fleece Back
- Custom Patterned for Easy Installation
- Warranty: 90 Days
Energy Suspension – Body Mount Set (Part No.3.4152G)
from
$78.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.
Product Features:
See More
Product Features:
- Replace to Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
Energy Suspension – Body Mount Set (Part No.3.4126G)
from
$88.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.
Product Features:
See More
Product Features:
- Replace to Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
Energy Suspension – Body Mount Set (Part No.3.4102G)
from
$57.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.
Product Features:
See More
Product Features:
- Replace to Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
Energy Suspension – Body Mount Set (Part No.3.4126R)
from
$84.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.
Product Features:
See More
Product Features:
- Replace to Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
AmeriSeal – Vertical Seal (Part No.34269)
AmeriSeal – Vertical Seal (Part No.34268)
Metro Mould – T-Top Panel Seal (Part No.TP 2001)
from
$145.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro T-Top Seals all have that show winning look and fit. Our T-Top Seals have a perfect fit. T-Top Seals. Includes molded corners and steel core across window side. For late ’77 models. Pair. R&L.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- There’s no need to slam when you use Metro SUPERsoft weatherstripping products
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Dorman – Metal Clip Nut No.8 (Part No.961-304D)
from
$4.49
Dorman offers a comprehensive line of Clip / Spring Nuts for a range of automotive applications. They are available for use with a large variety of screw sizes, throat depths, and panel ranges.
Product Features:
See More
Product Features:
- Constructed of high-quality materials for long-lasting durability
- Many different styles are available, including threaded and wide panel
- Packaged in a variety of piece counts for use with both small and large projects
- Also suitable for a broad range of industrial and commercial uses
Metro Mould – Moulding Clip (Part No.WF 205)
from
$3.49
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Quarter Window Reveal Molding Clip. Made of Steel. 1-3/8 In. X 11/16 In. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense material to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Popular 1979 Chevrolet Corvette Bodies and Fender Parts Categories
1979 Chevrolet Corvette Bodies and Fender Parts
Maybe you’re in the middle of a full rebuild of that 1979 Chevrolet Corvette. Maybe you just need a couple of Bodies and Fender Parts. Either way, Advance Auto Parts has 7 different Bodies and Fender Parts in our inventory ranging from $3.49 to $159.99. That means you can find the exact parts or products you need to keep that 1979 Chevrolet Corvette running smoothly.
Bodies and Fender Parts are only as good as their brand. We stock 5 different brands to make sure you have plenty of trusted parts to choose from for your 1979 Chevrolet Corvette. Energy Suspension, Metro Mould, and Le Bra are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Bodies and Fender Parts for your 1979 Chevrolet Corvette, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Bodies and Fender Parts to keep your 1979 Chevrolet Corvette rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Bodies and Fender Parts Brands To Make Your 1979 Chevrolet Corvette Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1979 Chevrolet Corvette demands trusted brand parts and products to keep it running. Many trusted brands of Bodies and Fender Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Corvette the best it can be. Be sure to browse some of our top Bodies and Fender Parts brands and parts.
FAQs for 1979 Chevrolet Corvette Bodies and Fender Parts
What are the most purchased Bodies and Fender Parts for the 1979 Chevrolet Corvette?
Out of 7 Bodies and Fender Parts for the 1979 Chevrolet Corvette, the most popular in our inventory are:
