1979 BMW 320i Drivetrains
More 1979 BMW 320i Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1979 BMW 320i, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1979 BMW 320i Drivetrains
Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.VV324)
from
$12.79
Product Features:
See More
- High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks
- Long-life friction modifiers and premium base oils help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
- Enhanced cleaning additives help reduce varnish formation and keep the transmission running properly longer
- Engineered with a unique blend of viscosity modifiers and base oils to provide better oil flow at low temperatures and greater film protection at higher temperatures
NTN – Differential Bearing (Part No.J7060741150NTN)
from
$39.19
Differential Bearing
National – Bearings (Part No.LM501310)
from
$9.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6133)
from
$83.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to BMW 06-17;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 2006-2017
- Weight approx: 1 Lbs
- BEARING ID / BORE: 1.1811 INCH / 30 MM
- CENTERLINE: 0.45 INCH / 11 MM
- MOUNT WIDTH: 6.30 INCH / 160 MM
- STYLE: ROUND FRAME
- WITH WINGS
SKF – Drive Shaft Support Bearing (Part No.K1040100111SKF)
from
$43.52
Rugged SKF drive shaft support bearings are built to meet or exceed OE specifications. The Support Bearings are also built on the years of experience that SKF has earned designing and supplying bearings to the world’s largest OE manufacturers. Engineered and manufactured to specific application requirements that deliver precise drive shaft alignment and support. Center support bearings are pre-lubricated and sealed with metal reinforced seals to prevent contamination. Rubber support cushions are manufactured from durable rubber compounds that provide maximum support while isolating the driveline shaft from damaging vibration. Drive shaft support frames are constructed from high quality steel or aluminum that provides additional strength and long life in harsh environments.
Product Features:
See More
Product Features:
- Original equipment design and quality
- Utilizes OE equivalent or better materials
- Pre-Lubricated and reinforced seals
- Rubber support cushions are manufactured from durable rubber compounds
- Support frames are constructed from high quality steel or aluminum
National – Shaft Repair Sleeve (Part No.99139)
from
$39.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
National – Multi Purpose Seal (Part No.1992)
from
$4.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Corteco – Pinion Seal (Part No.J7010426125CFW)
from
$16.40
Pinion Seal
Driveworks – Camshaft Seal (Part No.S-99139)
National – Bearings (Part No.206)
from
$25.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Febi – Drive Shaft Flex Joint (Guibo) (Part No.K102046069FEB)
from
$97.73
The OE quality Febi flex joint is made of high quality rubber and is reinforced with advanced fiber materials. The manufacturer recommends the flex disc be replaced whenever the clutch components are being replaced. TECH TIP : Flex discs have an alignment or triangle arrow formed into the rubber. The pointed end must face the mounting flange on the transmission when installed to ensure longevity.
Product Features:
See More
Product Features:
- OE quality, fit and performance
- High quality rubber
- Reinforced with advanced materials
- Excellent vibration control
Febi – Drive Shaft Flex Joint (Guibo) (Part No.K1020116405FEB)
from
$98.22
The OE quality Febi flex joint is made of high quality rubber and is reinforced with advanced fiber materials. The manufacturer recommends the flex disc be replaced whenever the clutch components are being replaced. TECH TIP : Flex discs have an alignment or triangle arrow formed into the rubber. The pointed end must face the mounting flange on the transmission when installed to ensure longevity.
Product Features:
See More
Product Features:
- OE quality, fit and performance
- High quality rubber
- Reinforced with advanced materials
- Excellent vibration control
Driveworks – Oil Seal (Part No.S-223542)
from
$6.49
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Bearings (Part No.206-L)
from
$30.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.HM88610)
from
$15.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Taper Bearing Cone (Part No.S-M-86649)
from
$8.79
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Bearings (Part No.HM89446)
from
$36.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Elring – Input Shaft Seal (Part No.J115630362ELR)
from
$10.04
Input Shaft Seal
National – Multi Purpose Seal (Part No.224010)
from
$4.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Multi Purpose Seal (Part No.710677)
from
$9.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
See More
National – Bearings (Part No.LM67048)
from
$9.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Taper Bearing Cup (Part No.S-HM-88610)
from
$6.49
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Driveworks – Taper Bearing Cone (Part No.S-HM-88649)
from
$19.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Bearings (Part No.HM88649)
from
$21.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.M86610)
from
$9.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Popular 1979 BMW 320i Drivetrains Categories
1979 BMW 320i Drivetrains
You count on your 1979 BMW 320i to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 27 Drivetrains ranging in price from $4.99 to $97.73, you’re sure to find everything you need for your 1979 BMW 320i.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 8 different brands like Valvoline, Driveworks, and National. 1979 BMW 320i Drivetrains start as low as $4.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 528 extensive product reviews on 1979 BMW 320i Drivetrains. Some of the top-rated Drivetrains products we carry are Bearings with 4.7 stars and Shaft Repair Sleeve with 5.0 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1979 BMW 320i below to get started!
Top-Rated Drivetrains Brands For Your 1979 BMW 320i
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1979 BMW 320i running right for years to come. In our inventory you’ll find brands like Valvoline, Driveworks, National, and even more.
Popular Valvoline Drivetrains
You’ll find popular Valvoline brand products across Differentials. All are waiting to get your 1979 BMW 320i back on the road. Some of the top-rated Valvoline products in these categories are:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 1979 BMW 320i Drivetrains
What are the most purchased Drivetrains for the 1979 BMW 320i?
Out of 27 Drivetrains for the 1979 BMW 320i, the most popular in our inventory are:
What are the top-rated 1979 BMW 320i Drivetrains?
Top-rated Drivetrains for your 1979 BMW 320i based on customer reviews/ratings are:
from
$39.99
(1)
Shaft Repair Sleeve
“used these speedy sleeves on the front axle of my Kubota with the wheel seals,saved me from spending 15 times more on the axle’s, Thank’s”
from
$21.79
(1)
Bearings
“Bearing came packed with grease. This makes setting pinion preload inaccurate. Bought this one to use as a setup bearing though. Why pre pack with gre”
