1978 Volvo 265 Differentials

Essential 1978 Volvo 265 Differentials

Yukon Gear – Replacement Standard Open Spider Gear Kit For Dana 30 With 27 Spline Axles (Part No.16073)

Replacement Standard Open Spider Gear Kit For Dana 30 With 27 Spline Axles

from

$155.99
Yukon replacement standard open spider gear kit for Dana 30 with 27 spline axles and with or without quick disconnect. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Spider gear kit
  • Fit Dana Spicer 30 open differential with 27 spline axles
  • Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

Yukon Gear – O-Ring For Dana 30 & Model 35 Zip Locker Seal Housing (Part No.34005)

O-Ring For Dana 30 & Model 35 Zip Locker Seal Housing

from

$13.99
Product Features:
  • O-ring for seal housing
  • Fits Dana Spicer 30 and AMC Model 35
See More

Yukon Gear – Replacement Outer Oil Slinger For Dana 25, 27, 30, 44 & 50 (Part No.33011)

Replacement Outer Oil Slinger For Dana 25, 27, 30, 44 & 50

from

$5.99
Product Features:
  • Outer oil slinger for Dana Spicer 25, 27, 30, 44 and 50
See More

Yukon Gear – Air Line Repair Kit, Zip Locker (Part No.34003)

Air Line Repair Kit, Zip Locker

from

$52.99
Air line repair kit, ZIP locker.

Product Features:
  • Air line repair kit
  • Includes 20′ air line and two repair fittings
See More

Yukon Gear – Dana 28 & Dana 30 Pinion Gear Thrust Washer (Part No.33285)

Dana 28 & Dana 30 Pinion Gear Thrust Washer

from

$7.99
Dana 28 & Dana 30 pinion gear Thrust washer. Also fits AMC Model 35 with 1.560″ side gear bore only.

Product Features:
  • Pinion gear thrust washer for Dana Spicer 25, 27 and 30
See More

USA Standard Gear – Open Spider Gear Set For Dana Spicer 30, 27 Spline (Part No.39005)

Open Spider Gear Set For Dana Spicer 30, 27 Spline

from

$151.99
Product Features:
  • Spider gear kit
  • Fits Dana Spicer 30 27 spline open differential
  • Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

Yukon Gear – Pinion Install Kit For Dana 30 Rear Differential (Part No.13017)

Pinion Install Kit For Dana 30 Rear Differential

from

$279.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Dana Spicer 30 rear
  • Included are pinion bearings and races, pinion seal, pinion nut, complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – Steel Cover For Dana 30 Standard Rotation Front (Part No.32316)

Steel Cover For Dana 30 Standard Rotation Front

from

$138.99
Product Features:
  • Fits standard rotation Dana Spicer 30
  • Steel
See More

Yukon Gear – High Performance Ring & Pinion Replacement Gear Set For Dana 30 In A 4.88 Ratio (Part No.24022)

High Performance Ring & Pinion Replacement Gear Set For Dana 30 In A 4.88 Ratio

from

$405.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:
  • Fits standard rotation Dana Spicer 30 without crush sleeve
  • 7.20″ ring gear diameter
  • 26 spline pinion
  • 10 ring gear bolts
  • 4.88 ratio
See More

USA Standard Gear – Spartan Locker for Dana 30 Differential with 27 Spline Axles, Includes Heavy-duty Cross Pin Shaft (Part No.17000)

Spartan Locker for Dana 30 Differential with 27 Spline Axles, Includes Heavy-duty Cross Pin Shaft

from

$639.99
The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect. Does not fit Std. JK Carrier. Use YC D706008

Product Features:
  • Fits Dana Spicer 30 with 27 spline axles
  • Made from 9310 steel for added strength
  • Replaces the spiders in a standard carrier case
See More

Motive Gear – Differential Bearing Kit – Timken (Part No.R30FRT)

Differential Bearing Kit - Timken

from

$93.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:
  • DANA-30 FORD BRG & SEAL KIT
See More

Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)

Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt

from

$9.99
5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.

Product Features:
  • Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
  • 1/2″ head
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

Redline Synthetic "Shock Proof" Oil - 3 Quarts

from

$99.99
Redline Synthetic “Shock Proof” Oil. 3 Quarts.

Product Features:
  • Includes three quarts of Redline Shockproof oil
See More

Yukon Gear – Set Up Bearing (Part No.56036)

Set Up Bearing

from

$172.99
Set-up carrier bearing kit (2 bearings, no races) LM501349. No return.

Product Features:
  • Set up bearing kit
  • Fits Dana Spicer 30
  • Easily slips on and off carrier journals to allow for easier carrier shim adjustment
See More

National – Bearings (Part No.HM89449)

Bearings

from

$25.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Replacement Standard Open Carrier Case For Dana 30, 3.73 & Up (Part No.20026)

Replacement Standard Open Carrier Case For Dana 30, 3.73 & Up

from

$164.99
Yukon replacement standard open carrier case for Dana 30, 3.73 & up, 1.943″ tall. If purchasing this case for a D30 JK front, you will need to also purchase spider gear set YPKD30-S-27.

Product Features:
  • Standard open carrier case
  • Fits Dana Spicer 30
  • 3.73 and up ratio only
  • Does not include spider gears
See More

Yukon Gear – Bearing Race Driver (Part No.56015)

Bearing Race Driver

from

$215.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits HM88610 race
  • All steel construction
See More

Yukon Gear – Dana 30 Side Gear Thrust Washer (Part No.33284)

Dana 30 Side Gear Thrust Washer

from

$10.99
Dana 25, Dana 27, & Dana 30 side gear Thrust washer.

Product Features:
  • Side gear thrust washer for Dana Spicer 25, 27, 30 and AMC Model 35
  • 1.560″ I.D.
  • Fits standard open differentials only
See More

Yukon Gear – Replacement Oil Baffle For Model 35 IFS Front, Dana 25, 27, 30, 44 IFS & Disconnect And Dana 50 (Part No.33002)

Replacement Oil Baffle For Model 35 IFS Front, Dana 25, 27, 30, 44 IFS & Disconnect And Dana 50

from

$4.99
Product Features:
  • Oil baffle for Dana Spicer 30, Dana Spicer 44 IFS, Dana Spicer 50, AMC Model 35 IFS
See More

Yukon Gear – Replacement Shim Kit For Dana 30, Front & Rear, Also D36Ica & Dana 44Ica (Part No.55023)

Replacement Shim Kit For Dana 30, Front & Rear, Also D36Ica & Dana 44Ica

from

$86.99
Replacement shim kit for Dana 30, front & rear, also D36ICA & Dana 44ICA.

Product Features:
  • Complete shim kit for Dana Spicer 30 front and rear, also Dana Spicer 36
See More

Yukon Gear – Powr Lok Button Kit For Dana 30, Dana 44 & Chrysler 8.75" (Part No.33536)

Powr Lok Button Kit For Dana 30, Dana 44 & Chrysler 8.75"

from

$67.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t

Product Features:
  • Powr Lok button kit
  • Fits Dana Spicer 30, 44 and Chrysler 8.75″
See More

Yukon Gear – Dana 30 & Dana 44 Power Lok Bolt, Left Hand, & 8.75" Chrysler & 55P (Part No.33234)

Dana 30 & Dana 44 Power Lok Bolt, Left Hand, & 8.75" Chrysler & 55P

from

$26.99
Dana 30 & Dana 44 Power Lok bolt, left hand, & 8.75″ Chrysler & 55P.

Product Features:
  • Power Lok case bolt for Dana Spicer 30, Dana Spicer 44, Chrysler 8.75″ and 1955-1964 GM passenger car
  • Left hand thread
See More

USA Standard Gear – Spartan Spring & Pin Kit, Fits Smaller Designs (Part No.17011)

Spartan Spring & Pin Kit, Fits Smaller Designs

from

$26.99
Spartan spring & pin kit, fits smaller designs.

Product Features:
  • Replacement spring and pin kit for Spartan Locker
  • Fits Dana 30, Dana 44, AMC Model 20, AMC Model 35, and Toyota designs
  • Includes 4 springs and 4 alignment pins
See More

Yukon Gear – Replacement Yoke For Dana 30, 44, And 50 With 26 Spline And A 1330 U/Joint Size (Part No.41019)

Replacement Yoke For Dana 30, 44, And 50 With 26 Spline And A 1330 U/Joint Size

from

$146.99
Yukon replacement yoke for Dana 30, 44, and 50 with 26 spline and a 1330 U/joint size. 3.625″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Dana Spicer 30 and 44
  • 26 spline
  • 1330 u-joint size
  • Outside snap ring design
  • 3.625″ snap ring span
  • 1.062″ cap diameter
  • Strap style
See More

SKF – Pinion Seal, Red (Part No.J701050573SKF)

Pinion Seal, Red

from

$16.92
Pinion Seal, Red

Yukon Gear – Replacement Ring Gear Bolt For Model 35, Dana 25, 27, 30 & 44 – 3/8" X 24 (Part No.33038)

Replacement Ring Gear Bolt For Model 35, Dana 25, 27, 30 & 44 - 3/8" X 24

from

$11.99
Replacement ring gear bolt for Model 35, Dana 25, 27, 30 & 44. 3/8″ x 24.

Product Features:
  • Ring gear bolt for Dana Spicer 25, 27, 30, 44 and AMC Model 35
  • 3/8″ x 24 thread
See More

Yukon Gear – Dana 25 / 27 / 30 / 36 / 44 / 53 Pinion Nut Washer Replacement (Part No.33163)

Dana 25 / 27 / 30 / 36 / 44 / 53 Pinion Nut Washer Replacement

from

$3.99
Replacement pinion nut washer for Dana 25, 27, 30, 36, 44 & 53.

Product Features:
  • Pinion nut washer for Dana Spicer 25, 27, 30, 44 and 50
See More

Yukon Gear – Zip Locker Bulkhead Quick-Disconnect Fitting (Part No.34038)

Zip Locker Bulkhead Quick-Disconnect Fitting

from

$18.99
Product Features:
  • Bulkhead quit connect fitting
See More

1978 Volvo 265 Differentials

Maybe you’re in the middle of a full rebuild of that 1978 Volvo 265. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 86 different Differentials in our inventory ranging from $3.99 to $1,303.99. That means you can find the exact parts or products you need to keep that 1978 Volvo 265 running smoothly.

Differentials are only as good as their brand. We stock 9 different brands to make sure you have plenty of trusted parts to choose from for your 1978 Volvo 265. Valvoline, Driveworks, and National are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1978 Volvo 265, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 512 reviews in this category, some of the top rated parts include Taper Bearing Cone with 3.0 stars and Bearings with 4.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1978 Volvo 265 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1978 Volvo 265 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1978 Volvo 265 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your 265 the best it can be. Be sure to browse some of our top Differentials brands and parts.

FAQs for 1978 Volvo 265 Differentials

What are the most purchased Differentials for the 1978 Volvo 265?

Out of 86 Differentials for the 1978 Volvo 265, the most popular in our inventory are:
Taper Bearing Set
from $10.29
(38)
Taper Bearing Set
Differential Bearings
Bearings
from $16.99
(25)
Bearings
Differential Bearings
3 Qt - Penzoil 80W90 Conventional Gear Oil
from $44.99
This product is not rated
3 Qt – Penzoil 80W90 Conventional Gear Oil
Differential Oil

What are the top-rated 1978 Volvo 265 Differentials?

Top-rated Differentials for your 1978 Volvo 265 based on customer reviews/ratings are:
Taper Bearing Cone
from $17.99
(2)
Taper Bearing Cone
“good deal”
Bearings
from $25.49
(1)
Bearings
“This Is The One That Fit My 1971 CHEVY TRUCK 12 BOLT PINION REAR BACK BEARING”