Volvo 265 Parts

Volvo 265 Body Parts

from

$48.19

Outside Door Handle

from

$51.89

Outside Door Handle

from

$28.99

Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:

Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
Easy Install – Less than 15 Minutes! based on average install time across all parts
No Special Tools Required
Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
Trilingual Install Instructions provided inside each package

from

$33.99

Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
Easy Install – Less than 15 Minutes! based on average install time across all parts
No Special Tools Required
Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
Trilingual Install Instructions provided inside each package

from

$21.99

Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:

Heavy Gauge Steel Body
Self-Cleaning Piston Assembly
Rubber O-Ring Piston Seal

from

$6.58

Door Contact Switch

from

$9.03

Window Relay

from

$1.21

MTC develops and manufactures high quality OE specified polyurethane mounts, bushings and undercar components to the spare parts industry.

from

$17.37

MTC develops and manufactures high quality OE specified polyurethane mounts, bushings and undercar components to the spare parts industry.

from

$22.63

MTC develops and manufactures high quality OE specified polyurethane mounts, bushings and undercar components to the spare parts industry.

from

$2.48

MTC develops and manufactures high quality OE specified polyurethane mounts, bushings and undercar components to the spare parts industry.

Volvo 265 Transmission Parts

from

$9.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$2.36

MTC develops and manufactures high quality OE specified polyurethane mounts, bushings and undercar components to the spare parts industry.

from

$39.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to VOLVO 76-90;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1976-1990
Weight approx: 1 Lbs

from

$10.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design Type: Spring Loaded; Multi-Lip
Provides good low temperature capability
Low swell in hydrocarbon fluids
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers reliable performance for every type of repair

from

$16.49

Design type: springless; single-lip
Temperature range: -100°F to 450°F; -73°C to 232°C
Resistant to hydrocarbon/oxygenate blends and provides superior performance
Provides excellent dry running capabilities, low coefficient of friction and excellent resistance to chemicals
Delivers quality and reliable performance for every type of repair

from

$10.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$45.32

The FAE aftermarket Backup Light Switch is the ideal high quality replacement for your vehicle. The backup Light Switch activates your reverse lights when your vehicle is in reverse. This aftermarket replacement backup light switch is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$39.99

Product Features:

Imperial Econo-Kool« tube and fin transmission cooler
Size: 3/4″ x 5″ x 12-1/2″
Sub-compact to compact cars
GVWR up to 12,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$19.71

MTC develops and manufactures high quality OE specified polyurethane mounts, bushings and undercar components to the spare parts industry.

from

$24.99

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$11.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$32.99

OEM specified. Designed specially for high-torque and high vibration applications, like those common in import engines, this premium RTV gasket maker exceeds manufacturers’ performance requirements. Sensor-safe, low odor, and non-corrosive. Maximum vibration resistance, with outstanding resistance to oils, cooling and shop fluids. Temperature range -65ºF to 500ºF (-54 Deg. C to 260 Deg. C) intermittent.

Product Features:

Designed specially for high-torque and high vibration applications
Maximum vibration resistance with outstanding resistance to oils, cooling and shop fluids
OEM specified
Low-odor, non-corrosive formula
Temperature Range: -65 Deg. F to 500 Deg. F (-54 Deg. C to 260 Deg. C)

from

$51.00

Application-Specific Engineering Design to ensure the correct fit, function and high performance of the wheel bearing. BCA supplies premium replacement bearings that meet or exceed the OE specifications. Premium Quality Materials are used for forged steel rings, seals, precision cages, rolling elements and premium grease, to ensure that our customers receive a robust, durable product. Seals are customized for each BCA hub based on application-specific materials and design requirements to minimize the chance of contamination and maximize bearing life. Precision Cage on BCA bearings are designed to keep the rolling elements of the bearing spaced correctly. The cages undergo design verification and production validation testing to ensure high quality. Pre-Lubrication of all BCA wheel bearings with premium grease for your convenience. This is a major advantage so you do not have to worry about grease or seal application.

Product Features:

For wheel bearings, BCA utilizes Forged Steel in the inner and outer rings that meets our stringent steel quality specifications to optimize bearing life.
For taper bearings, BCA utilizes Case Carburized Steel for heavy duty shock loads and longer life.

from

$10.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$20.25

For wheel bearings, BCA utilizes Forged Steel in the inner and outer rings that meets our stringent steel quality specifications to optimize bearing life.
For taper bearings, BCA utilizes Case Carburized Steel for heavy duty shock loads and longer life.

from

$2.59

AT Pan Drain Plug

from

$2.94

AT Shift Linkage Bus

from

$15.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$16.79

ACDelco Professional Air Charge Temperature Sensor Connector is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, starting and charging, body-electrical and lighting, and/or engine fuel management. This premium aftermarket connector is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$4.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$20.41

Problems with the installation of this part are usually due to failure to follow proper repair procedures. Use only a bushing extractor (NEVER A CHISEL!!!) to remove the old bushing. Measure the inside diameter of the housing (it should be 0.004″-0.005″ smaller that the O/D of the bush for proper crush). Gently use a brake cylinder hone to enlarge the housing I/D if necessary. Install the new bushing only with the proper bushing driver!

Volvo 265 Clutch Systems

from

$10.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Controlled heat treating process for lasting performance and extended bearing life
Industry leading coverage
Professional technicians know they can depend on National

from

$38.77

The TRW Clutch Cable is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium Original Equipment replacement
Provides performance and dependability
Manufactured to meet OE specifications

Volvo 265 Automotive Accessories

from

$106.99

The Budge Ultra Car Cover offers protection against dust, debris, tree sap and other environmental pollutants. This lightweight vehicle cover is comprised of 3 layers of polypropylene. Our Ultra car covers are fully breathable, with ultra-sonically welded seams for added durability. This soft, nonabrasive material will not harm the surface of your vehicle. Designed for indoor and outdoor use, the Ultra Car Cover is designed to be breathable while it protects your vehicle. This improves airflow to reduce condensation and helps prevent mold and mildew. The Ultra cover features a full elastic hem and built-in grommets. This cover is gray in color and includes a storage bag and antenna patch. Designed to fit, this station wagon cover fits station wagons 200″ L x 60″ W x 60″ H.

Product Features:

This station wagon cover fits station wagons 200″ L x 60″ W x 60″ H
This car cover is made from a 3 layer, UV resistant material that will protected your vehicle’s paint from fading
This car cover is water resistant and features ultrasonically welded seams for extra durability
Cover is suitable for short term outdoor protection and long-term indoor protection
Elasticized hem and sewn-in grommets for a secure fit

from

$56.99

Lower Radiator Hose Heater

from

$81.99

Circulation Tank Heater is Available in 850W, 1000W, 1500W, and 2000W, 120V and 240V. This heater is thermostatically controlled 135 degrees-175 degrees. Moderate mechanical ability is required for installation. Uses versatile strap type mounting.

Product Features:

Available for all size engines
Equipped with check valve
Fits most liquid cooled engines
Installations easier and simpler
New lower radiator hose connectors

from

$40.99

Freeze Plug Heater, also referred to as a block heater or frost plug heater is the most reliable and efficient way to pre-heat your engine. Operates by being directly submerged into coolant and heating the block. Requires mechanical ability to install.

Product Features:

Saves wear and tear on your engine
Simple installation directly into engine block

from

$41.99

Saves wear and tear on your engine
Simple installation directly into engine block

from

$25.99

This High Note Horn meets the high quality specifications for OE manufacturers around the world. It generates a high-frequency sound through a specially designed resonator. Features a heavy-duty wire motor, a body made of steel with a corrosion-resistant finish and includes a universal mounting bracket. Each horn is 12V and can be used as a single or dual terminal install. These horns are extremely compact and lightweight and they meet or exceed OEM, SAE and EEC specifications. Each horn is tested to assure maximum performance. These horns can be mounted singly or as duals. 130 dB.

from

$59.99

AVS continues its high-quality automotive accessories with the AVS Windflector. Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:

The Windflector greatly reduces sunroof wind noise and air turbulence
Prevents the rain from entering the sunroof opening while driving
Helps reduce heat buildup inside the vehicle
Available in 5 different sizes for a perfect fit
No drill installation
Installs quickly and easily with 3M automotive-grade adhesive

from

$59.99

The Windflector greatly reduces sunroof wind noise and air turbulence
Prevents the rain from entering the sunroof opening while driving
Helps reduce heat buildup inside the vehicle
Available in 5 different sizes for perfect fit
No drill installation
Installs quickly and easily with 3M automotive-grade adhesive

from

$59.99

The Windflector greatly reduces sunroof wind noise and air turbulence
Prevents the rain from entering the sunroof opening while driving
Helps reduce heat buildup inside the vehicle
Available in 5 different sizes for perfect fit
No drill installation
Installs quickly and easily with 3M automotive-grade adhesive

from

$59.99

The Windflector greatly reduces sunroof wind noise and air turbulence
Prevents the rain from entering the sunroof opening while driving
Helps reduce heat buildup inside the vehicle
Available in 5 different sizes for perfect fit
No drill installation
Installs quickly and easily with 3M automotive-grade adhesive

from

$59.99

The Windflector greatly reduces sunroof wind noise and air turbulence
Prevents the rain from entering the sunroof opening while driving
Helps reduce heat buildup inside the vehicle
Available in 5 different sizes for perfect fit
No drill installation
Installs quickly and easily with 3M automotive-grade adhesive

from

$59.99

The Windflector greatly reduces sunroof wind noise and air turbulence
Prevents the rain from entering the sunroof opening while driving
Helps reduce heat buildup inside the vehicle
Available in 5 different sizes for perfect fit
No drill installation
Installs quickly and easily with 3M automotive-grade adhesive

from

$59.99

The Windflector greatly reduces sunroof wind noise and air turbulence
Prevents the rain from entering the sunroof opening while driving
Helps reduce heat buildup inside the vehicle
Available in 5 different sizes for a perfect fit
No drill installation
Installs quickly and easily with 3M automotive-grade adhesive

Looking for the best Volvo 265 aftermarket replacement parts? Replacing worn and broken parts on your Volvo 265? Check out our online catalog to find the best selection of aftermarket Volvo 265 parts as well as real user reviews on Volvo 265 replacement parts. Make an informed decision about every component you add to your 265.

At Advance Auto, we’ve got you covered when it comes to getting your Volvo 265 in tip top condition. We’ve got over 987 Volvo 265 parts to choose from in popular categories like Air Intakes, Body Parts and Transmission Parts. If you’re looking for the best prices, try searching our Volvo 265 parts catalog to compare OEM and aftermarket parts for your Volvo 265.

Whether you need Volvo 265 body parts, interior components, or custom Volvo 265 parts you can find them online at Advance Auto. Want to order your Clutch Systems online? Or maybe you need your Volvo Automotive Accessories same day? No problem, you can pick up 265 parts in person at locations across the country, or have them delivered to straight to your door after ordering online. Finding a great deal on new and used Volvo 265 parts has never been easier.

Advance Auto customers frequently search for the following types of Volvo 265 auto parts. Check out customer reviews and ratings, and compare prices on the following Volvo 265 parts:

People also search Advance Auto for these popular years of the Volvo 265:

Volvo 265 Parts

Professional Parts Sweden – Outside Door Handle (Part No.O301815737PPS)

Professional Parts Sweden – Outside Door Handle (Part No.O301815738PPS)

Atlas Lift – Lift Support (Part No.LS11071)

Atlas Lift – Lift Support (Part No.LS11432)

StrongArm – Tailgate Lift Support: 18.33" Ext Length, 6.84" Travel, 105 Lbs of Force, 1 Pk (Part No.D4458)

Professional Parts Sweden – Door Contact Switch (Part No.O315017285PPS)

CRP – Window Relay (Part No.P205716164CRP)

MTC – Molding Clip (Part No.O503016411MTC)

MTC – Mud Flap (Part No.O513064255MTC)

MTC – Mud Flap (Part No.O513039128MTC)

MTC – Grille Lock Pin (Part No.O500345099MTC)

Felpro – Transmission Oil Pan Gasket (Part No.TOS 18646)

MTC – Shifter Bushing (Part No.J117536107MTC)

Anchor – Transmission Mount: Rear, 1 Piece (Part No.8800)

National – Multi Purpose Seal (Part No.710714)

National – Multi Purpose Seal (Part No.1108)

National – Multi Purpose Seal (Part No.311189)

FAE – Backup Light Switch (Part No.P3006947429FAE)

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242009)

MTC – Shifter Boot (Part No.J107545003MTC)

National – Shaft Repair Sleeve (Part No.99169)

National – Multi Purpose Seal (Part No.223830)

Permatex – Ultra Grey RTV Gasket Maker (9.5 oz.) (Part No.85084)

NTN – BCA Wheel Bearing (Part No.K8000323922NTN)

National – Bearings (Part No.LM501314)

NTN – BCA Wheel Bearing (Part No.K800027802NTN)

MTC – AT Pan Drain Plug (Part No.J503284509MTC)

Professional Parts Sweden – AT Shift Linkage Bus (Part No.J4070390128PPS)

National – Bearings (Part No.A-14)

ACDelco – Multi-Purpose Wire Connector with Leads (Part No.PT2164)

Driveworks – Ball Bearing (Part No.S-107-DD)

Professional Parts Sweden – Extension Hsng. Bush (Part No.J5101389743PPS)

National – Bearings (Part No.203-FF)

TRW – Clutch Cable (Part No.I4020389935TRW)

Budge – Duro Station Wagon Cover, Gray, Size S2: Fits up to 16’8" L, 3 Layer, Water Resistant, Scratchproof (Part No.DS-2)

Kat’s – Lower Radiator Hose Heater (Part No.16500)

Kat’s – Circulation Tank Heater; Thermostatically Controlled (Part No.13100)

Kat’s – Freeze Plug Heater (Part No.11420)

Kat’s – Freeze Plug Heater (Part No.11427)

Fiamm – Freeway Blaster High Note Horn (Part No.7210223)

Auto Ventshade (AVS) – Windflector – Pop-Out, Window, Fits Up To 34.5" Wide Sunroofs, Smoke, Outside Mount, 1 Pc (Part No.78061)

Auto Ventshade (AVS) – Windflector – Classic, Window, Fits Up To 41.5" Wide Sunroofs, Smoke, Outside Mount, 1 Pc (Part No.77005)

Auto Ventshade (AVS) – Windflector – Classic, Window, Fits Up To 34.25" Wide Sunroofs, Smoke, Outside Mount, 1 Pc (Part No.77002)

Auto Ventshade (AVS) – Windflector – Classic, Window, Fits Up To 33.0" Wide Sunroofs, Smoke, Outside Mount, 1 Pc (Part No.77001)

Auto Ventshade (AVS) – Windflector – Classic, Window, Fits Up To 35.5" Wide Sunroofs, Smoke, Outside Mount, 1 Pc (Part No.77003)

Auto Ventshade (AVS) – Windflector – Classic, Window, Fits Up To 38.5" Wide Sunroofs, Smoke, Outside Mount, 1 Pc (Part No.77004)

Auto Ventshade (AVS) – Windflector – Pop-Out, Window, Fits Up To 32.5" Wide Sunroofs, Smoke, Outside Mount, 1 Pc (Part No.78060)