1978 Oldsmobile Cutlass Performance and Racing Products

Popular 1978 Oldsmobile Cutlass Performance and Racing Products Categories

Essential Performance and Racing Products for 1978 Oldsmobile Cutlasses

Edelbrock – Performer RPM Carb/Plate Nitrous Systems for 4500 Series Carbs (100-250 Hp) (Part No.70004)

Performer RPM Carb/Plate Nitrous Systems for 4500 Series Carbs (100-250 Hp)

from

$1113.99
Product Features:
  • Features 10 lbs. Bottle Capacity
  • For 4500 Series Carbs
  • Between 100-250 HP
  • 2-Stage Performer RPM
  • Includes All Necessary Installation Items
See More

Edelbrock – Performer EPS Intake Manifold for 1955-86 Small-Block Chevy (Part No.2701)

Performer EPS Intake Manifold for 1955-86 Small-Block Chevy

from

$195.99


Product Features:
  • Maximizes Performance with Edelbrock Carburetors
  • Runners Tuned to Match Square Bore Carburetor
  • Maximizes Peak Torque Around 3500 RPM
  • Excellent Throttle Response and Mid-Range Power
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 deg. Firing Order
  • Prod. +5 HP and +9 ft/lbs. of Torque Over PN[2101]
See More

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)

Tie Rod Dust Boot

from

$9.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:
  • Easy to Install
  • Superior Material
  • Saves Your Tie Rods
  • Lasts Longer
  • Looks Great
See More

Powertrax – Lock Right Locker (Part No.1921-LR)

Lock Right Locker

from

$368.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Hooker Headers – High-Performance Small Block Chevy Long Tube Headers (Part No.2451HKR)

    High-Performance Small Block Chevy Long Tube Headers

    from

    $283.99
    Small block Chevy 350 applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

    Product Features:
    • High Performance
    • Affordable
    • Durable 16 Gauge Material
    • Welds Easier
    • Lasts Longer
    • Heat Cured
    • High Heat Resistant
    See More

    Mr. Gasket – Ultra Seal: Head Gasket (Part No.5780G)

    Ultra Seal: Head Gasket

    from

    $64.99
    Mr. Gasket Ultra-Seal Head Gaskets are a five layer (graphite core/perforated steel outer layers) composite construction. The graphite core has excellent thermoconductivity (transfers heat) away from hot spots in head preventing gasket burn-out. They provide excellent stability, compressibility and high temperature endurance. A high temperature silicone coating ensures sealing of engine fluids. Compatible with cast iron or aluminum heads, they will not brinell (indent) aluminum cylinder heads. Suitable for high performance street, drag race and oval track use. Sold individually.brbrGasket Bore 3.870 inch, Compressed thickness 0.028 inch

    Product Features:
    • Five layer (graphite core/perforated steel outer layers) composite construction
    • Graphite core has excellent thermo-conductivity-transfers heat away from hot spots in head preventing gasket burn-out
    • Provides excellent stability, compressibility and high temperature endurance
    • Coated with high temperature silicone to ensure sealing of engine fluids
    • Will not brinell (indent) aluminum cylinder heads
    • For high performance street, drag race and oval track use
    • Compatible w/High Octane Fuel
    • Compatible With Exotic Fuel
    See More

    Edelbrock – Performer-Plus Camshaft Kit for Buick 231-252 V6 Even Fire (Part No.5487)

    Performer-Plus Camshaft Kit for Buick 231-252 V6 Even Fire

    from

    $367.99


    Product Features:
    • Designed for Optimum Torque and Acceleration
    • Maximum Performance From Idle through Mid-Range
    • Matched To Performer Intake PN[5486]
    • Includes Hydraulic Lifters and Assembly Lube
    • Major Improvement in Throttle Response and Torque
    • Use For Daily Drivers/Trucks/Vans/RVs/4x4s
    • Take The Guesswork Out Of Camshaft Selection
    See More

    Mr. Gasket – Intake Bolt Kit (Part No.5003)

    Intake Bolt Kit

    from

    $75.99
    Finish your custom engine job with these show quality grade 5 chromed 12-point bolts, includes AN washers which have no exposed shoulder for a professional appearance. Includes (12) 3/8-16 x 1 inch bolts with (12) 3/8 inch AN washers.

    Product Features:
    • Chrome plated
    • Grade 8
    • 12-point head
    • AN washers with no exposed shoulder for a professional appearance
    See More

    MSD Ignition – Distributor Cap and Rotor; GM HEI Distributor; Red (Part No.8416)

    Distributor Cap and Rotor; GM HEI Distributor; Red

    from

    $46.49
    The cap and rotor of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set. To make things easy, we now offer these cap and rotor replacement kits.

    Product Features:
    • Designed w/Performance In Mind
    • High Quality Material
    • Stainless Terminals
    • Performance replacement part
    See More

    Mr. Gasket – Ultra Seal: Sure-Lock Rocker Arm Nuts (Part No.923G)

    Ultra Seal: Sure-Lock Rocker Arm Nuts

    from

    $87.19
    Designed to keep the rocker arms positively locked for precise and critical valve train adjustments. Manufactured from quality grade steel, then heat-treated for extra strength and plated with a durable finish. Kits include 16 rocker arm nuts with socket head set screws and one hex key wrench.

    Product Features:
    • (16) Rocker Arm Nuts w/ Locks 3/8″-24 Threads
    • Shank O.D. .540″
    • Includes Locks and Hex Wrench
    • High-Quality Grade Steel
    • Heat-Treated For Ex Strength
    • Plated With Durable Gold Tone Finish
    See More

    Mr. Gasket – Chrome Plated Pulley Set (Part No.4962)

    Chrome Plated Pulley Set

    from

    $172.99
    New chromed steel pulleys are a replacement for originals and are designed as matched sets to assure correct alignment of the drive belts. They are highly polished then chrome plated. Crankshaft Pulley = 7.30 inch diameter Water Pump Pulley = 6.30 inch diameter

    Product Features:
    • Chrome plated steel
    • Designed as matched assemblies
    See More

    Edelbrock – Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95 (Part No.5794)

    Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95

    from

    $151.99
    Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks are black oxide coated. Non-rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

    Product Features:
    • Complete Kit: Includes Retainers And Locks
    • Springs Made of Highest Quality Spring Wire
    • Springs Precision Wound To Close Tolerances
    • Includes Superior Quality Steel Retainers
    • Includes 7 deg. Heat-Treated Valve Stem Locks
    • Retainers and Locks Black Oxide Coated
    • Non-Rotator Style: Dyno Tested and Street Proven
    • Great Match to Edelbrock Camshaft Kit
    See More

    Energy Suspension – Control Arm Bushing Set (Part No.3.3103G)

    Control Arm Bushing Set

    from

    $110.99
    For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

    Product Features:
    • Maintains Better Alignment While Driving
    • Full Floating and Non Binding
    • Fits Into the Remaining Stock Control Arms
    See More

    FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1444)

    Exhaust Manifold Gasket Set

    from

    $31.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
    • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
    • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
    • Slotted bolt holes allow for easier header installation.
    • Not intended for use in emission controlled vehicles.
    See More

    PerTronix – D9001 Flame-Thrower HEI Distributor Advance Curve Kit (Part No.D9001)

    D9001 Flame-Thrower HEI Distributor Advance Curve Kit

    from

    $26.99
    Mechanical Advance Curve Ki tPrecision machined chromoly weights and center plate eliminate erratic timing. Three sets of springs, guide bushings and complete installation instructions make recurving your distributor easy.

    Product Features:
    • PerTronix D9001 Flame-Thrower HEI Distributor Advance Curve Kit
    • Precision machined chromoly weights and center plate.
    See More

    Mallory – Unilite Ignition Module (Part No.605)

    Unilite Ignition Module

    from

    $85.29
    Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

    Product Features:
    • Service Part
    • No Moving Parts To Wear Out
    • Self Contained Unit
    • Can Drive OEM
    • Can Drive High Performance Ignition Coils
    See More

    Hurst – Installation Kit, Competition Plus Shifter (Part No.3738616)

    Installation Kit, Competition Plus Shifter

    from

    $289.99
    This installation kit includes all linkage parts and hardware necessary for the installation of your Hurst shifter. See trans I.D. charts to confirm application.

    Product Features:
    • Gear Shift Installation Kit
    • Includes Hardware
    • Durable
    • Sold as a Kit
    • Hurst Quality
    See More

    K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2002)

    Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

    from

    $17.99
    K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

    Product Features:
    • HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
    • VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
    • PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
    • EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
    • EASY TO REMOVE: Fast and easy Wrench-Off removal
    • HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
    • HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
    See More

    Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)

    High Performance 180 Degree Thermostat for Increased Flow

    from

    $26.99
    Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

    Product Features:
    • Opens At 180 Degrees
    • Designed to Resist Large Variations of Coolant Pressure at High RPM
    • Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
    • For High Performance Street, Drag Race, and Oval Track
    • Copper & Brass Construction – Resists Corrosion
    • High Flow
    See More

    Spectre – Water Neck; Olds (Part No.4733)

    Water Neck; Olds

    from

    $26.99
    Spectre’s Oldsmobile V8 water neck fits Oldsmobile 330, 350, 425 and 455 engines. This water neck has been designed around the OEM specifications and has a chrome plated finish for a lasting look that fits great. This water neck has an additional by-pass hose connection and includes the bolts.

    Product Features:
    • Fits Oldsmobile 330, 350, 425 and 455 engines
    • Chrome plated
    • Bolts included
    • Designed for OEM fit
    • Easy to install
    • O-ring/gasket not included
    See More

    B & M – SHIFT IMPROVER HP (Part No.35265)

    SHIFT IMPROVER HP

    from

    $72.99
    Shift Improver Kit – 1981 to 1990 Chevrolet, Buick, Olds, Pontiac, GMC TH-200-4R Application: 1981 to 1990 Chevrolet, Buick, Olds, Pontiac, GMC TH-200-4R Recalibrate your automatic transmission for optimum performance and extended life! Select the mode that best suits your application Provides crisp shifts on any stock automatic transmission Eliminates shift overlap and excess wear on clutches and bands due to slippage The B&M Shift Improver Kit the easiest way to get the stout performance you’ve always wanted out of your automatic transmission – and you get two modes of performance to select from: Heavy Duty, or Street/Strip. It’s our least expensive and simplest to install kit. All you need are some hand tools! In the space of an afternoon, you can turn your transmission into a B&M-tuned unit! Ask the thousands of satisfied customers that have installed one in their transmissions! STAGE 1. HEAVY DUTY Firm positive shifts without loss of driver comfort for improved performance in all street vehicles. Recommended for regular passenger vehicles. STAGE 2. STREET/STRIP Provides positive shifts for high performance street use or for competitive events. This level is for the enthusiast who wants the hardest, quickest possible.

    Product Features:
    • Provides Crisp Shifts
    • On Any Stock Automatic Transmission
    • Eliminates Soft/Sluggish Shift
    • Eliminates Shift Overlap
    • Eliminate Clutch and Band Wear
    • Improves Transmission Life
    • Transmission Removal Not Required
    See More

    Mr. Gasket – Intake Gasket (Part No.116)

    Intake Gasket

    from

    $40.19
    Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. They provide excellent sealing and durability. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track.

    Product Features:
    • Manufactured from cellulose/nitrile composition gasket material.
    • Provides excellent sealing and durability.
    • Can be trimmed if necessary for modified port applications.
    • Complete with manifold end seals and distributor gasket.
    • For OE replacement, high performance street, drag race and oval track use.
    See More

    Edelbrock – Performer 1411 Carburetor: 750 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1411)

    Performer 1411 Carburetor: 750 CFM, 4 Barrel, Square Bore, Electric Choke Inlet

    from

    $494.99
    The Edelbrock 1411 Performer Series 750 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characterist

    Product Features:
    • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
    • Electric Choke
    • 4 Barrel Count
    • Square Bore
    • Smooth Secondary Transition
    • Both Timed and Full Vacuum Ports
    • Includes PCV Outlet
    See More

    MagnaFlow – Street Series Crossmember-Back Performance Exhaust System (Part No.15893)

    Street Series Crossmember-Back Performance Exhaust System

    from

    $1142.99
    The MagnaFlow Street Series Crossmember-Back Performance Exhaust System 15893 brings enhanced engine sound and dyno-proven performance to your muscle car with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features a crossmember-back layout designed to replace your exhaust system from the crossmember on back. With its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Multiple Exit Options exit with 2.75in. Polished Weld-On Single Wall Turndown Cut Edge tips, your muscle car will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15893 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited lifetime construction warranty.

    Product Features:
    • Dyno-proven performance
    • Durable corrosion-resistant stainless steel construction
    • CNC precision robotic manufacturing techniques
    See More

    Motive Gear – Performance Differential Ring and Pinion (Part No.G885342)

    Performance Differential Ring and Pinion

    from

    $322.99


    Product Features:
    • GM 10BL 8.5 R/P 3.42 FRT/REAR MGP
    See More

    Edelbrock – Replacement Timing Cover Gasket #4243 For SB Chevy, Fits 2-Piece Part #4242 (Part No.4243)

    Replacement Timing Cover Gasket #4243 For SB Chevy, Fits 2-Piece Part #4242

    from

    $41.99
    Product Features:
    • Replacement Gasket Set For PN[4242]
    See More

    Mr. Gasket – Oil Pan Bolt Kit (Part No.6085)

    Oil Pan Bolt Kit

    from

    $17.49
    The special self locking oil pan bolts, use a smaller-than-standard hex head is ideal for tight spaces. Because of the hex flange head design, it will not fall back into the socket wrench, allowing for easier installation. Special under head serrations prevent loosening and the wide flange head distributes uniform clamping pressure for an ultra gasket seal. Bolts are zinc plated, grade 5.

    Product Features:
    • Ideal For Tight Spaces
    • Serrations Prevent Loosening
    • Flange Distributes Pressure
    • Zinc Plated Bolts
    • Grade 5 Material
    • Easy Installation
    See More

    Mr. Gasket – Oil Pan (Part No.5415)

    Oil Pan

    from

    $329.99
    This fully polished, finned aluminum oil pan is die-cast for a perfect fit. 5 quart capacity. Drain plug & bolts included.

    Product Features:
    • Die Cast Aluminum w/ Finned Bottom
    • Polished
    • Includes Drain Plug and Mounting Bolts
    • 5 Quart Capacity
    See More

    Upgrade your 1978 Oldsmobile Cutlass with Top-Quality Performance and Racing Products

    When it comes to maintaining or upgrading your 1978 Oldsmobile Cutlass, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Oldsmobile or enhancing its overall performance, Performance and Racing Products are key to keeping your Cutlass functioning at its best. At Advance Auto Parts, we offer a wide selection of 234 Performance and Racing Products for the 1978 Oldsmobile Cutlass, designed to meet your needs without breaking the bank. From Performance Exhaust Product replacements to Performance Oil Filters upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

    Affordable Prices and Wide Selection

    Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1978 Oldsmobile Cutlass at great prices. Our Performance and Racing Products inventory for this model ranges from just $9.99 to $1,268.99, with an average price of $256.08. Our 234 Performance and Racing Products in stock come from 24 trusted brands, so you’re sure to find the right part for your 1978 Oldsmobile Cutlass without overspending.

    Top Brands and High Customer Satisfaction

    Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1978 Oldsmobile Cutlass, we stock popular OEM and aftermarket Performance and Racing Products from top names like K&N, Mr. Gasket, Edelbrock, and more. K&N Performance and Racing Products start at just $17.99 and boast an impressive 5 stars average rating from customers. Mr. Gasket and Edelbrock also bring quality to the table, with Performance and Racing Products available starting at $9.99, and at an average 4 stars rating. With 1,242 customer reviews and counting, our 1978 Oldsmobile Cutlass Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

    Explore Related Parts and More

    While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1978 Oldsmobile Cutlass is always ready to roll. We’re committed to providing you with everything you need to keep your Cutlass in top shape, all in one place. Start shopping confidently below for your 1978 Oldsmobile Cutlass!

    Best-Selling Performance Exhaust Products for 1978 Oldsmobile Cutlasses

    Enhance the driving experience in your Oldsmobile with 22 quality Performance Exhaust Product components, starting at $20.99.

    FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1444)

    Exhaust Manifold Gasket Set

    from

    $31.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
    • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
    • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
    • Slotted bolt holes allow for easier header installation.
    • Not intended for use in emission controlled vehicles.
    See More

    Flowmaster Inc. – Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942448)

    Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound

    from

    $113.99
    Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing four-inch case street muffler we’ve ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
    See More

    Hooker Headers – Competition Header (Part No.2466HKR)

    Competition Header

    from

    $269.99
    LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

    Product Features:
    • High Performance
    • Affordable
    • Durable 16 Gauge Material
    • Welds Easier
    • Lasts Longer
    • Heat Cured
    • High Heat Resistant
    See More

    Flowtech – Real-Seal; Header Gasket (Part No.99150AFLT)

    Real-Seal; Header Gasket

    from

    $85.39


    Product Features:
    • Water/Weather Resistant
    • Re-Useable
    • Will Not Burn Or Blow Out
    • Suitable For Port-Matching
    • Made In USA
    See More

    Mr. Gasket – Performance Exhaust Gasket Set for Enhanced Sealing and Durability (Part No.150B)

    Performance Exhaust Gasket Set for Enhanced Sealing and Durability

    from

    $20.99
    Mr. Gasket Performance exhaust gasket material is a heavy duty material, .062 inch thick, consisting of an acrylic binder system to resist high temperature. This material is made for sealing exhaust applications. Provides excellent sealing and durability.

    Product Features:
    • Manufactured from high-temperature acrylic blend exhaust material
    • Provides excellent sealing and durability
    • Can be trimmed if necessary for modified port applications
    • For OE replacement, high performance street, drag race and oval track use
    • Resists Deteriorating
    • Provides Excellent Torque Retention
    See More

    Flowtech – Standard Header with Enhanced Fuel Efficiency and Leakproof Technology (Part No.11108FLT)

    Standard Header with Enhanced Fuel Efficiency and Leakproof Technology

    from

    $223.99


    Product Features:
    • Fuel Economy From The Engine
    • Leak Test For Max Performance
    • Mandrel-Formed Power Plenum
    • Leakproof O-Ringed Port Seals
    • Include All Mounting Hardware
    See More

    Hooker Headers – Aero Chamber Muffler (Part No.21501HKR)

    Aero Chamber Muffler

    from

    $120.99
    The polished stainless steel Aero Chamber is designed to do much more than simply muffle exhaust noise. The Aero Chamber Muffler produces a deep throaty powerful sound that will not change with time. The Hooker Aero Chamber uses a unique step principal, similar to that which is currently popular in racing header design. The aerodynamically designed chambers flow 23 percent better and produce more horsepower and torque than the most popular high performance brand. The stainless steel construction assures good looks, corrosion protection ang long life.

    Product Features:
    • All Aluminized/Stainless Steel
    • Deep Throaty Powerful Sound
    • 23 percent More Flow Than Others
    • More Horsepower And Torque
    • Sound Absorption Chamber
    • Stepped Acceleration Chamber
    See More

    Mr. Gasket – Aluminum Exhaust Gaskets for Intense Heat Resistance (Part No.7402G)

    Aluminum Exhaust Gaskets for Intense Heat Resistance

    from

    $42.99
    Upgrade to Mr. Gasket Aluminum Layered Header Gaskets and eliminate blown exhaust gaskets forever. They conform to warped and damaged surfaces to create an airtight, leak-proof seal and will not shrink or deteriorate EVER.

    Product Features:
    • Withstands Intense Exhaust Heat
    • Reusable header, exhaust manifold and collector flange gaskets
    • Manufactured from “dead soft” aluminum layers – .125″ thick
    • Easy Removal For Disassembly
    • Conforms easily to surface irregularities (warped flanges)
    • Compresses down to 0.060″ to create a tight leak-proof seal
    • Will not shrink, deteriorate, or blow out- eliminating gasket leaks
    • For high performance street, drag race and oval track use
    See More

    Hooker Headers – High-Performance Small Block Chevy Long Tube Headers (Part No.2451HKR)

    High-Performance Small Block Chevy Long Tube Headers

    from

    $283.99
    Small block Chevy 350 applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

    Product Features:
    • High Performance
    • Affordable
    • Durable 16 Gauge Material
    • Welds Easier
    • Lasts Longer
    • Heat Cured
    • High Heat Resistant
    See More

    Flowmaster Inc. – 50 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound (Part No.942453)

    50 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound

    from

    $139.99
    The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
    See More

    Flowmaster Inc. – 50 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound (Part No.842453)

    50 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound

    from

    $175.99
    The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
    See More

    Hooker Headers – Competition Header (Part No.2451-1HKR)

    Competition Header

    from

    $619.99
    LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

    Product Features:
    • High Performance
    • Affordable
    • Durable 16 Gauge Material
    • Welds Easier
    • Lasts Longer
    • Heat Cured
    • High Heat Resistant
    See More

    Mr. Gasket – Aluminum Exhaust Gasket: High-Heat Resistant, Easy Removal (Part No.7401G)

    Aluminum Exhaust Gasket: High-Heat Resistant, Easy Removal

    from

    $42.99
    Upgrade to Mr. Gasket Aluminum Layered Header Gaskets and eliminate blown exhaust gaskets forever. They conform to warped and damaged surfaces to create an airtight, leak-proof seal and will not shrink or deteriorate EVER.

    Product Features:
    • Withstands Intense Exhaust Heat
    • Reusable header, exhaust manifold and collector flange gaskets
    • Resists Deteriorating
    • Manufactured from “dead soft” aluminum layers – .125″ thick
    • Easy Removal For Disassembly
    • Conforms easily to surface irregularities (warped flanges)
    • Compresses down to 0.060″ to create a tight leak-proof seal
    • Will not shrink, deteriorate, or blow out- eliminating gasket leaks
    • For high performance street, drag race and oval track use
    See More

    Mr. Gasket – Exhaust Gasket Set (Part No.150)

    Exhaust Gasket Set

    from

    $30.19
    Manufactured from high-temperature composite exhaust material. Provides maximum torque retention to eliminate gasket failure. Can be trimmed if necessary for modified port applications. Precision die cut for an excellent fit. For OE replacement, high-performance street, drag race and oval track.

    Product Features:
    • High-Temperature Exhaust Material
    • Withstands Extreme Exhaust Heat
    • Provides Excellent Sealing And Durability
    • Superior Tensile Strength
    • Resists Deteriorating
    • Provides Excellent Torque Retention
    See More

    Edelbrock – Exhaust Manifold Gasket Set for Chevrolet (Part No.7204)

    Exhaust Manifold Gasket Set for Chevrolet

    from

    $24.99
    Product Features:
    • 0.0625 in. Thickness
    • 1.50 in. x 1.50 in. Port Size
    • For SB Chevy
    • Black Color
    • Two Piece Configuration
    See More

    Dynomax – 89017 Exhaust System Kit (Part No.89017)

    89017 Exhaust System Kit

    from

    $259.99
    Give your vintage vehicle’s exhaust system an upgrade with a DynoMax® dual header kit. Designed to attach with OE headers, it features a special reducer that allows for a variety of mounting options.

    Product Features:
    • COMPATIBILITY — Designed for 1978-1987 midsize sedans such as Oldsmobile Cutlass, Chevrolet Monte Carlo, Buick Regal and Pontiac Grand Prix; see product information for compatibility and engine spec
    • BUILD IT YOURSELF — Design and custom fabricate your own exhaust system with this kit that attaches to OE headers
    • FLEXIBLE MOUNTING — Special reducer design allows for a variety of mounting options
    • IMPROVED FLOW CAPACITY — Smooth bends improve flow capacity over traditional bends
    • SPECS — Extra-long tailpipes with side exits with a full 2.25-in. diameter; tail pipes exit on each side of vehicle at rear bumper
    • COMPLETE SOLUTION — Includes all the necessary clamps, hangers, flanges, gaskets, mounting hardware, intermediate, extension and tail pipes
    • PREMIUM MATERIALS – Made from quality aluminized steel for durability and long life
    • BETTER TOGETHER — Complete your system with premium DynoMax mufflers and DynoMax accessories for a complete performance exhaust system
    • WARNING — Not legal for use on pollution-controlled motor vehicles; headers are for racing use only and not intended or applicable for highway use
    See More

    Hooker Headers – Competition Header (Part No.2451-2HKR)

    Competition Header

    from

    $895.99
    LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

    Product Features:
    • High Performance
    • Affordable
    • Durable 16 Gauge Material
    • Welds Easier
    • Lasts Longer
    • Heat Cured
    • High Heat Resistant
    See More

    Hooker Headers – Competition Header (Part No.2466-1HKR)

    Competition Header

    from

    $668.99
    LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

    Product Features:
    • High Performance
    • Affordable
    • Durable 16 Gauge Material
    • Welds Easier
    • Lasts Longer
    • Heat Cured
    • High Heat Resistant
    See More

    Dynomax – Manifold/Header (Part No.85121)

    Manifold/Header

    from

    $119.99
    Manifold/Header

    Mr. Gasket – Copper Seal; Exhaust Gasket Set (Part No.7151)

    Copper Seal; Exhaust Gasket Set

    from

    $60.29
    Copperseal exhaust gaskets are unique gaskets made from .043 inch solid copper. They feature an embossed O-ring design for a leak proof seal. They won’t shrink, deteriorate or blowout. Header bolts stay tight. Ideal for motor homes and towing.

    Product Features:
    • Will Not Shrink/Deteriorate
    • Creates A Tight Leak Proof Seal
    • Helps Lower Under hood Temps
    • Seals Irregular Surfaces
    • Seals Slightly Damaged Surface
    • Ideal For Tow Vehicles
    • Ideal For Motor Homes
    See More

    Mr. Gasket – Copper Seal; Exhaust Gasket Set (Part No.7150)

    Copper Seal; Exhaust Gasket Set

    from

    $59.99
    Copperseal exhaust gaskets are unique gaskets made from .043 inch solid copper. They feature an embossed O-ring design for a leak proof seal. They won’t shrink, deteriorate or blowout. Header bolts stay tight. Ideal for motor homes and towing.

    Product Features:
    • Will Not Shrink/Deteriorate
    • Creates A Tight Leak Proof Seal
    • Helps Lower Under hood Temps
    • Seals Irregular Surfaces
    • Seals Slightly Damaged Surface
    • Ideal For Tow Vehicles
    • Ideal For Motor Homes
    See More

    Mr. Gasket – Exhsthdrgskt (Part No.7652G)

    Exhsthdrgskt

    from

    $51.99
    Header Installation Kit – Chevrolet V8 1955-1991 265-400 Oval Port. Includes gaskets and fasteners necessary for header installation. Made using premium Ultra-Seal exhaust and collector gaskets. Mr. Gasket header and collector bolts deliver necessary clamp-load to seal flange mating surfaces.

    Product Features:
    • Oval Port Header Gaskets
    • Port Size 1.50″ x 1.82″
    • Collector Gasket 3.00″ Diam. 3-bolt Style
    • Includes Header & Collector Bolts
    See More

    Most Popular 1978 Oldsmobile Cutlass Performance Oil Filters

    Customize your Oldsmobile with 3 Performance Oil Filters products like Performance Oil Filters and Performance Oil Filler Caps, all priced under $17.99.

    K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2002)

    Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

    from

    $17.99
    K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

    Product Features:
    • HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
    • VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
    • PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
    • EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
    • EASY TO REMOVE: Fast and easy Wrench-Off removal
    • HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
    • HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
    See More

    Mr. Gasket – Enhancement Products (Part No.2060)

    Enhancement Products

    from

    $10.49
    This chrome plated breather, embossed with a Mr. Gasket logo, is perfect for race car vacuum balance systems and OEM use. It fits any 1 1/4 inch diameter hole. It has metal baffle/foam element with 1 inch outer diameter neck and 5/8 inch outer diameter breather tube.

    Product Features:
    • Internally battled
    • High-porosity filter
    • Ideal for high performance
    • Includes rubber grommet
    See More

    Mr. Gasket – Chrome Oil Fill Cap – Push-On Style W/Tube For Pvc Hookup – Fitting For Easy Pcv Hose Hook Up (Part No.2063)

    Chrome Oil Fill Cap - Push-On Style W/Tube For Pvc Hookup - Fitting For Easy Pcv Hose Hook Up

    from

    $12.99
    This chrome-plated steel push-on breather/oil filler cap fits over your oil filler tube. It has a side fitting for easy PCV hose (positive crankcase ventilation) hook up. Perfect compliment to Mr. Gasket matching chrome oil filler tube, #2066

    Product Features:
    • Chrome plated steel
    • Fits stock factory oil filler tubes
    • Features side PCV hook up tube
    • Includes Rubber Grommet
    See More

    Top Picks for 1978 Oldsmobile Cutlass Performance Fuel Systems

    Upgrade Oldsmobile Cutlasses with top-quality Performance Fuel Systems parts, including 19 OEM and aftermarket selections for your 1978 model.

    Mr. Gasket – Fuel Pump Block-Off Plate (Part No.1515)

    Fuel Pump Block-Off Plate

    from

    $12.99
    This is what you need when changing your manual fuel pump to electric. It blocks the hole that remains when you remove the mechanical fuel pump from the engine to keep the oil inside. This plate is precision machined and is chrome plated.

    Product Features:
    • Chrome Plated Steel
    • Comes With Gasket
    See More

    Edelbrock – Performer 1411 Carburetor: 750 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1411)

    Performer 1411 Carburetor: 750 CFM, 4 Barrel, Square Bore, Electric Choke Inlet

    from

    $494.99
    The Edelbrock 1411 Performer Series 750 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characterist

    Product Features:
    • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
    • Electric Choke
    • 4 Barrel Count
    • Square Bore
    • Smooth Secondary Transition
    • Both Timed and Full Vacuum Ports
    • Includes PCV Outlet
    See More

    Edelbrock – Performer 1404 Carburetor: 500 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1404)

    Performer 1404 Carburetor: 500 CFM, 4 Barrel, Square Bore, Manual Choke Inlet

    from

    $435.99
    The Edelbrock 1404 Performer Series 500 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristic

    Product Features:
    • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
    • Manual Choke
    • 4 Barrel Count
    • Square Bore
    • Smooth Secondary Transition
    • Both Timed and Full Vacuum Ports
    • Includes PCV Outlet
    See More

    Edelbrock – CARBURETOR (Part No.14054)

    CARBURETOR

    from

    $488.99
    Product Features:
    • EnduraShine Finish
    • GM/AMC-Style Throttle Linkage
    • Can Add Electric Choke PN[1478]
    • Easy Tuning with 2-Piece Design
    • Smooth Secondary Transition
    • Both Timed and Full Vacuum Ports
    • Includes PCV Outlet
    See More

    Edelbrock – Performer 1406 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1406)

    Performer 1406 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet

    from

    $428.99
    The Edelbrock 1406 Performer Series 600 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1406 Performer Series 600 CFM electric choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.

    Product Features:
    • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
    • Electric Choke
    • 4 Barrel Count
    • Square Bore
    • Smooth Secondary Transition
    • Both Timed and Full Vacuum Ports
    • Includes PCV Outlet
    See More

    Edelbrock – Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1405)

    Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet

    from

    $394.99
    The Edelbrock 1405 Performer Series 600 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1405 Performer Series 600 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.

    Product Features:
    • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
    • Manual Choke
    • 4 Barrel Count
    • Square Bore
    • Smooth Secondary Transition
    • Both Timed and Full Vacuum Ports
    • Includes PCV Outlet
    See More

    Edelbrock – Performer 1407 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1407)

    Performer 1407 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Choke Inlet

    from

    $451.99
    The Edelbrock 1407 Performer Series 750 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristic

    Product Features:
    • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
    • Manual Choke
    • 4 Barrel Count
    • Square Bore
    • Smooth Secondary Transition
    • Both Timed and Full Vacuum Ports
    • Includes PCV Outlet
    See More

    Holley – High Output Mechanical Fuel Pump – 110 GPH Free Flow (Part No.12-327-11)

    High Output Mechanical Fuel Pump - 110 GPH Free Flow

    from

    $144.99
    Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.

    Product Features:
    • High Output Fuel Flow
    • Flows 110 gph Free Flow
    • Shutoff Pressure Pre-Set From 6.5 To 8 PSI
    • Fuel Pressure Regulator Is Not Required
    • Heavy Duty Construction For Continuous High rpm Operation
    • Fuel Body Casting Can Be Rotated For Plumbing Situations
    • Inlet And Outlet Tapped For 3/8 in. NPT
    • Inlet/Outlet Tapped For 3/8 in. NPT
    See More

    Holley – High-Flow Mechanical Fuel Pump for Street Performance (Part No.12-834)

    High-Flow Mechanical Fuel Pump for Street Performance

    from

    $124.99
    Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.

    Product Features:
    • Street Performance
    • Flows 80 gph Free Flow
    • Shutoff Pressure Pre-Set 7.5 PSI
    • Fuel Pressure Regulator Is Not Required
    • Heavy Duty Construction For Continuous High rpm Operation
    • Fuel Body Casting Can Be Rotated For Plumbing Situations
    • Inlet And Outlet Tapped For 1/4 in. NPT
    • Inlet/Outlet Tapped For .25 in. NPT
    See More

    Spectre – Sbc Blk Off Plate W/Bolts (Part No.42463)

    Sbc Blk Off Plate W/Bolts

    from

    $12.99
    Spectre’s triple chrome plated Fuel Pump Block Off Plate was designed for small block Chevrolet engines. Engineered for optimum fit and function, this kit includes a block off plate gasket and chrome mounting bolts with washers.

    Product Features:
    • Necessary if switching to electric fuel pump
    • Includes block off plate gasket
    • Includes chrome mounting bolts with washers
    • Triple chrome plated
    See More

    Holley – Mechanical Fuel Pump (Part No.12-327-13)

    Mechanical Fuel Pump

    from

    $165.99
    Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.

    Product Features:
    • High Output Fuel Flow
    • Flows 130 gph Free Flow
    • Shutoff Pressure Pre-Set From 7.5 To 9 PSI
    • Fuel Pressure Regulator Required Recommend P/N 12-704
    • Heavy Duty Construction For Continuous High rpm Operation
    • Redesigned High Flow Valves Ensure Adequate Fuel Delivery
    • Fuel Body Casting Can Be Rotated For Plumbing Situations
    • Inlet And Outlet Tapped For 3/8 in. NPT
    See More

    Mr. Gasket – Fuel Pump Mounting Plate (Part No.1514)

    Fuel Pump Mounting Plate

    from

    $16.99
    Ideal for mounting a stock original equipment pump. The mounting plate is precision cut to cover the stock fuel pump opening and is complete with gasket.

    Product Features:
    • Chrome Plated Steel
    • Comes With Gasket
    See More

    Edelbrock – Performer 1400 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1400)

    Performer 1400 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet

    from

    $498.99
    The Edelbrock 1400 Performer Series 600 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characterist

    Product Features:
    • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
    • Electric Choke
    • 4 Barrel Count
    • Square Bore
    • Electric Choke Installed from Factory
    • Smooth Secondary Transition
    • Includes Only Timed Vacuum Port
    • Includes EGR ; Fuel Vapor Outlet
    See More

    Holley – Prem Street Carbs (Avengers) (Part No.0-80570)

    Prem Street Carbs (Avengers)

    from

    $626.99
    Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.

    Product Features:
    • Vibratory Polished For Good Looks
    • Optimized Street Calibration That Works Out Of The Box
    • Factory Preset Electric Choke For Easy Startups
    • Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
    • No Unnecessary Trips Back To The Parts Store
    • Limited Lifetime Warranty
    • 100% Wet-Flow Tested To Assure It Arrives Ready To Run
    • Street Ready; Out Of The Box
    See More

    Edelbrock – CARBURETOR (Part No.14064)

    CARBURETOR

    from

    $541.99
    Product Features:
    • EnduraShine Finish
    • GM/AMC-Style Throttle Linkage
    • Electric Choke Installed from Factory
    • Easy Tuning with 2-Piece Design
    • Smooth Secondary Transition
    • Both Timed and Full Vacuum Ports
    • Includes PCV Outlet
    See More

    Edelbrock – Performer 1412 Carburetor: 800 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1412)

    Performer 1412 Carburetor: 800 CFM, 4 Barrel, Square Bore, Manual Choke Inlet

    from

    $538.99
    The Edelbrock 1412 Performer Series 800 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1412 Performer Series 800 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation. Dyno tests proved that the EPS 800 carb outperformed a Holley #3310 carb out-of-the-box by 26 ft-lbs. of torque and 22 hp on a small-block Chevy engine equipped with an Edelbrock Performer RPM power package

    Product Features:
    • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
    • Manual Choke
    • 4 Barrel Count
    • Square Bore
    • Smooth Secondary Transition
    • Both Timed and Full Vacuum Ports
    • Includes PCV Outlet
    • Can Easily Calibrate with Rods and Jets
    See More

    Edelbrock – Reman Thunder AVS Carb #18129 800 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No.18129)

    Reman Thunder AVS Carb #18129 800 CFM With Manual Choke, Satin Finish (Non-EGR)

    from

    $413.99
    Product Features:
    • Satin Finish
    • 4 Barrel
    • Aluminum Body Material
    • Manual Choke Type
    • 800 cfm Maximum Flow Rating
    See More

    Edelbrock – Performer Carburetor #9907 750 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No.9907)

    Performer Carburetor #9907 750 CFM With Manual Choke, Satin Finish (Non-EGR)

    from

    $407.99
    Product Features:
    • Satin Finish
    • 4 Barrel
    • Annular Booster Type
    • Manual Choke Type
    • 750 cfm Maximum Flow Rating
    See More

    Holley – Keith Dorton Series; VoluMax Race Series Fuel Pump (Part No.12-327-20)

    Keith Dorton Series; VoluMax Race Series Fuel Pump

    from

    $206.99
    Keith Dorton Series VoluMax race series fuel pump made from heavy duty construction for continuous high RPM operation. Redesigned high flow valves always ensure adequate fuel delivery. Fuel pressure regulator is required. Fuel body casting can be rotated

    Product Features:
    • High Output Fuel Flow
    • Flows 170 gph Free Flow
    • Shutoff Pressure Pre-Set At 8 PSI
    • Fuel Pressure Regulator Required Recommend P/N 12-704
    • Heavy Duty Construction For Continuous High rpm Operation
    • Redesigned High Flow Valves Ensure Adequate Fuel Delivery
    • Fuel Body Casting Can Be Rotated For Plumbing Situations
    • 3/4in.-16 Inlet And Outlet Ports
    See More

    In-Demand Performance Ignition Products for 1978 Oldsmobile Cutlasses

    Select from 10 premium Performance Ignition Products parts for your 1978 Oldsmobile Cutlass, with prices ranging from $30.49 to $461.99.

    Accel – High Energy Ignition Coil for GM HEI – 1973-1991 (Part No.140003)

    High Energy Ignition Coil for GM HEI - 1973-1991

    from

    $100.99
    Engineered for higher energy output resulting in quicker starting, improved idle quality, crisper throttle response and more high RPM power. Compatible with both original HEI ignition systems and later model computer controlled HEI systems. No need to remove or re-time distributor. Complete with simplified ground strap, mounting screws, silicone coil gasket and carbon contact brush / spring.

    Product Features:
    • 10-15% More Energy
    • Direct Plug In Replacement Direct OE Fit
    • Advanced Bobbin Technology
    • Highly Specialized Silicone Magnetic Steel Cores
    • Standard Motor Products SMP Dr-31
    • MSD 8225
    See More

    MSD Ignition – High Energy Ignition Coil for GM HEI Distributors (Part No.8225)

    High Energy Ignition Coil for GM HEI Distributors

    from

    $112.99
    HEI owners now have a choice to replace their stock coil with the MSD high energy unitized coil for GM HEI distributors. This coil is a direct replacement of the stock coil and offers increased spark energy when used with the MSD HEI module, PN 83645. The coil features special low induc?tance, high temperature windings which charge faster to give you increased spark energy at higher rpm. The premium epoxy filled construction is designed to withstand harsh race applications as well as the wear and tear that daily usage dishes out, and still deliver more spark energy to the spark plugs.

    Product Features:
    • Direct performance replacement for GM HEI coil-in-cap dist.
    • 70:1 Turns Ratio
    • Lower Primary Resistance Produces High Voltage Output
    • Full Power Sparks To 9000 Rpm w/PN[83647] MSD HEI Module
    See More

    Mallory – Unilite Ignition Module (Part No.605)

    Unilite Ignition Module

    from

    $85.29
    Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

    Product Features:
    • Service Part
    • No Moving Parts To Wear Out
    • Self Contained Unit
    • Can Drive OEM
    • Can Drive High Performance Ignition Coils
    See More

    Accel – GM Hei Supercoil Red/White (Part No.140005)

    GM Hei Supercoil Red/White

    from

    $113.99
    Engineered for higher energy output resulting in quicker starting, improved idle quality, crisper throttle response and more high RPM power. Compatible with both original HEI ignition systems and later model computer controlled HEI systems. No need to remove or re-time distributor. Complete with simplified ground strap, mounting screws, silicone coil gasket and carbon contact brush / spring.

    Product Features:
    • 10-15% More Energy
    • Direct Plug In Replacement Direct OE Fit
    • Advanced Bobbin Technology
    • Highly Specialized Silicone Magnetic Steel Cores
    • Similar to Standard Motor Products SMP Dr-32
    • Long Life And Great Looks
    See More

    Mallory – Distributor Wiring Harness (Part No.29349)

    Distributor Wiring Harness

    from

    $30.49


    Product Features:
    • Service Part
    • Makes Connections Quick And Easy
    See More

    MSD Ignition – Crank Trigger Kit; Small Block Chevy; 6? Balancer (Part No.8600)

    Crank Trigger Kit; Small Block Chevy; 6? Balancer

    from

    $461.99
    For a long time, racers have known that one of the best things to do to an engine to improve its performance is to stabilize the ignition timing. The MSD flying magnet crank trigger system does exactly that by using magnets embedded in an aluminum wheel. The MSD flying magnet crank trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This flying magnet design produces accurate trigger signals and the non-magnetic pick-up cannot be false triggered. Each flying magnet crank trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver’s side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The adjustable bracket provides a wide range of timing adjustment and spacers are included. These systems will trigger MSD 6, 7, 8 and 10 series ignitions and all MSD timing accessories.

    Product Features:
    • 6.25 in. Diameter
    • Absolutely the most accurate way to trigger the ignition.
    • The non-magnetic pickup cannot be false triggered.
    • Powerful magnets are embedded in a billet aluminum trigger wheel.
    See More

    Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

    Promaster Classic Series; Ignition Coil

    from

    $186.99
    Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

    Product Features:
    • Glass Filled Polyester Case
    • Longer Spark Duration
    • Increased Performance
    • No Energy Loss Due To Arcing
    • Includes Brass Contact Terminal
    See More

    Accel – Custom Fit 8.8mm; Spark Plug Wire Set (Part No.8849)

    Custom Fit 8.8mm; Spark Plug Wire Set

    from

    $113.99
    These ACCEL wire sets are custom tailored for true street and strip performance use. Features oversize 8.8 mm ultra performance wires and spark plug boots, 550 degrees Fahrenheit double silicone construction with fiberglass braid. Spiral wound steel core conductor.

    Product Features:
    • 8.8mm Graphite Suppression
    • Silicone Spark Plug Boots
    • 550 Degree Double Silicone Construction
    • Fiberglass Braid
    • Carbon/Graphite Core
    • Magnetic Suppression
    • Fiberglass/Kevlar Core
    • 500 Ohms Resistance
    See More

    MSD Ignition – Mod HEI Dust Cover, V8 & Odd Fire V6 (Part No.8401)

    Mod HEI Dust Cover, V8 & Odd Fire V6

    from

    $72.99
    Stock style replacement modified HEI coil dust cover. Used on 8 cylinder vehicles only.

    Product Features:
    • Externally mounted coil
    • Increases reliability
    • Increase performance
    • High quality plastic
    • Resist spark loss
    • Use brass conductors
    • Low resistance connections
    • No modifications
    See More

    Mr. Gasket – HEI Adjustable Vacuum Advance Kit – Includes weights, camplate, and bushings – Improve performance (Part No.6011)

    HEI Adjustable Vacuum Advance Kit - Includes weights, camplate, and bushings - Improve performance

    from

    $55.99
    HEI Adjustable Vacuum Advance Kit – Includes weights, camplate, and bushings – Improve performance

    Most Sold 1978 Oldsmobile Cutlass Performance Engines

    Explore our best-selling Oldsmobile parts for the 1978 Cutlass among 94 OEM and aftermarket options starting from $14.99.

    Edelbrock – Performer EPS Intake Manifold for 1955-86 Small-Block Chevy (Part No.2701)

    Performer EPS Intake Manifold for 1955-86 Small-Block Chevy

    from

    $195.99


    Product Features:
    • Maximizes Performance with Edelbrock Carburetors
    • Runners Tuned to Match Square Bore Carburetor
    • Maximizes Peak Torque Around 3500 RPM
    • Excellent Throttle Response and Mid-Range Power
    • For Idle to 5500 RPM Street-Driven Performance
    • Dual-Plane Low-Rise Intake w/180 deg. Firing Order
    • Prod. +5 HP and +9 ft/lbs. of Torque Over PN[2101]
    See More

    FEL-PRO Performance – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.1003)

    Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts

    from

    $39.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
    • NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
    • SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
    • STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
    • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
    See More

    FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1004)

    Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

    from

    $52.99
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
    • Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
    • Raises combustion sealing force to roughly three times that of standard head gaskets.
    • Steel wire rings for the greatest combustion seal strength.
    • Not intended for use in emission controlled vehicles.
    See More

    FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1603)

    Engine Valve Cover Gasket Set

    from

    $23.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
    • Not intended for use in emission controlled vehicles.
    See More

    Edelbrock – Performer Intake Manifold for 1987-95 Small Block Chevy, Satin Finish (Part No.2104)

    Performer Intake Manifold for 1987-95 Small Block Chevy, Satin Finish

    from

    $329.99


    Product Features:
    • For Idle to 5500 RPM Street-Driven Performance
    • Dual-Plane Low-Rise Intake w/180 Deg Firing Order
    • Patented Runner Design Ensures Broad Torque Curve
    • Excellent Throttle Response and Mid-Range Power
    • 50-State Street Legal if Correct Carburetor Used
    • Accepts Late-Model Choke; Waterneck; and HEI
    • Accepts A/C And Alternator
    • Accepts Exhaust Heated Chokes
    See More

    Competition Cams – MAGNUM ROLLER ROCKERS, SMALL BLOCK CHEVY 1.52 1 ST (Part No.1412-16)

    MAGNUM ROLLER ROCKERS, SMALL BLOCK CHEVY 1.52 1 ST

    from

    $213.99
    These Magnum Roller Rocker Arms for Chevy V8 265-400 and V6 200-262 applications are the ultimate street rocker. With a 3/8″ stud diameter and 1.52 ratio, they are designed for serious performance enthusiasts. All Magnum Roller Rocker Arms are constructed

    Product Features:
    • Roller tip reduces friction while stiff design and superior ratio accuracy yield more effective valve lift
    • For applications with less than 350 lbs. of open spring pressure
    • Constructed from 8620 chromemoly steel, a superior material that will not flex and ensures maximum lift
    • Ultimate street roller rocker arm designed for serious performance enthusiasts
    See More

    Edelbrock – Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95 (Part No.5794)

    Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95

    from

    $151.99
    Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks are black oxide coated. Non-rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

    Product Features:
    • Complete Kit: Includes Retainers And Locks
    • Springs Made of Highest Quality Spring Wire
    • Springs Precision Wound To Close Tolerances
    • Includes Superior Quality Steel Retainers
    • Includes 7 deg. Heat-Treated Valve Stem Locks
    • Retainers and Locks Black Oxide Coated
    • Non-Rotator Style: Dyno Tested and Street Proven
    • Great Match to Edelbrock Camshaft Kit
    See More

    FEL-PRO Performance – PERFORMANCE VALVE COVER GASKET SET (Part No.1602)

    PERFORMANCE VALVE COVER GASKET SET

    from

    $23.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Die cut silicone rubber gaskets conform to out-of-flat covers
    • Great for on-again/off-again situations
    • Not intended for use in emission controlled vehicles.
    See More

    B & M – Tork Master 3000 (Part No.20402)

    Tork Master 3000

    from

    $499.99
    Torque Converter – Tork Master 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost performance torque converter. The Tork Master is an excellent all-around performance street converter. The best ‘value priced’ street converters available, Tork Master converters come with a new precision pump drive tube and all are pressure tested and fully balanced. The Tork Master torque converter is not recommended for big block or supercharged applications. New allow steel pump drive tube. Needle thrust bearing when factory equipped. New thrust washer between turbine and cover when required.

    Product Features:
    • New Precision Pump Drive Tube
    • Pressure Tested
    • Fully Balanced
    • Needle Thrust Bearing
    • New Thrust Washer
    • Washer Between Turbine and Cover
    See More

    B & M – Tork Master 2400 (Part No.20404)

    Tork Master 2400

    from

    $339.99
    Torque Converter – Tork Master 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost performance torque converter. The Tork Master is an excellent all-around performance street converter. The best value priced street converters available, Tork Master converters come with a new precision pump drive tube and all are pressure tested and fully balanced. The Tork Master torque converter is not recommended for big block or supercharged applications. New alloy steel pump drive tube. Needle thrust bearing when factory equipped. New thrust washer between turbine and cover when required. Due to torque converter core availability, the actual converter size may vary but performance functionality will be as advertised.

    Product Features:
    • New Precision Pump Drive Tube
    • Pressure Tested
    • Fully Balanced
    • Needle Thrust Bearing
    • New Thrust Washer
    See More

    Edelbrock – Pushrod Set for S/B Chevy (Part No.9630)

    Pushrod Set for S/B Chevy

    from

    $189.99


    Product Features:
    • Case-Hardened Tubing
    • Welded Ends
    • 5/16 in. Diameter
    • Use with or without Hardened Steel Guideplates
    See More

    Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)

    High Performance 180 Degree Thermostat for Increased Flow

    from

    $26.99
    Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

    Product Features:
    • Opens At 180 Degrees
    • Designed to Resist Large Variations of Coolant Pressure at High RPM
    • Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
    • For High Performance Street, Drag Race, and Oval Track
    • Copper & Brass Construction – Resists Corrosion
    • High Flow
    See More

    Weiand – Action Plus Water Pumps (Part No.9240P)

    Action Plus Water Pumps

    from

    $215.99
    Weiand’s light weight, performance aluminum mechanical Action-Plus water pumps give a weight saving of 30 percent to 50 percent over stock cast-iron pumps. These pumps feature a premium quality bearing and seal that have twice the load capacity of stock pumps. Weiand’s exclusive housing counter bore keeps the bearing form walking out. All pumps are designed with the necessary bracket bosses and water connections to fit popular street applications.

    Product Features:
    • Twisted Snout Water Pump Design For Updated Style
    • Street Performance
    • Heavy Duty Shaft w/5/8 in. Pilot
    • Six-Blade Stamped Steel
    • Anti-Cavitation Impeller
    • 100 Percent Leak Tested
    See More

    Weiand – Action Plus Water Pumps (Part No.9208P)

    Action Plus Water Pumps

    from

    $215.99
    Weiand’s light weight, performance aluminum mechanical Action-Plus water pumps give a weight saving of 30 percent to 50 percent over stock cast-iron pumps. These pumps feature a premium quality bearing and seal that have twice the load capacity of stock pumps. Weiand’s exclusive housing counter bore keeps the bearing form walking out. All pumps are designed with the necessary bracket bosses and water connections to fit popular street applications.

    Product Features:
    • Twisted Snout Water Pump Design For Updated Style
    • Street Performance
    • Heavy Duty Shaft w/5/8 in. Pilot
    • Six-Blade Stamped Steel
    • Anti-Cavitation Impeller
    • 100 Percent Leak Tested
    See More

    Edelbrock – Valve Cover Gasket Set for Chevrolet (Part No.7549)

    Valve Cover Gasket Set for Chevrolet

    from

    $35.99
    Product Features:
    • Valve Cover Gasket
    See More

    FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1800)

    PERFORMANCE OIL PAN GASKET SET

    from

    $18.29
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
    • With steel core to provide ultimate excellent blowout resistance.
    • Not intended for use in emission controlled vehicles.
    See More

    Edelbrock – Sure Seat Valve Springs for Ford 429/460 V8 1969-1987 (Part No.5767)

    Sure Seat Valve Springs for Ford 429/460 V8 1969-1987

    from

    $111.99
    Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks black oxide coated. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

    Product Features:
    • For Use With Cast Iron Heads
    • Springs Made of Highest Quality Spring Wire
    • Springs Precision Wound To Close Tolerances
    • Use with Original Equipment Heads Only
    See More

    Mr. Gasket – Water Neck (Part No.2557)

    Water Neck

    from

    $27.49
    Precision die cast, these water necks are first polished to a high luster, then chrome plated. Features an O-ring style seal to prevent water leaks. Comes with O-ring gasket and mounting bolts.

    Product Features:
    • Complete with o-rings and mounting bolts
    • Features an o-ring style seal to prevent water leaks
    • Chrome plated
    • 1/2″ NPT port can be used for various coolant temp related sensors or switches
    See More

    Mr. Gasket – Intake Manifold Bolt Set – Chevrolet Small Block – Socket Head 3/8"-16 X 1" Bolts & Washers (Part No.956G)

    Intake Manifold Bolt Set - Chevrolet Small Block - Socket Head 3/8"-16 X 1" Bolts & Washers

    from

    $17.49
    These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8 inch-16 x 1 inch bolts & washers

    Product Features:
    • Zinc plated to resist corrosion and provide a clean professional appearance
    • Made from Grade 5 steel for strength and durability
    • Flat washers provide uniform clamp load and prevent galling on aluminum intake manifolds
    • Allen (socket) Head
    • Zinc Plated For Protection
    See More

    Mr. Gasket – Bolt Water Pump (Part No.4998)

    Bolt Water Pump

    from

    $32.99
    This Mr. Gasket Water Pump Bolt Set includes chrome plated grade 5 hex head fasteners to install the water pump on your small or big block Chevrolet with the long style water pump. Includes four 3/8 inch-16 x 2 inch bolts with four 3/8 inch AN washers. AN washers have no exposed shoulder which offers a professional appearance.

    Product Features:
    • Chrome Plated
    • Grade 5
    • AN washers with no exposed shoulder for a professional appearance
    See More

    FEL-PRO Performance – Oil Pan Gasket Set: High-Temperature Rubber-Coated Fiber, 5 Piece Set (Part No.1803)

    Oil Pan Gasket Set: High-Temperature Rubber-Coated Fiber, 5 Piece Set

    from

    $26.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
    • With steel core to provide ultimate excellent blowout resistance.
    • Not intended for use in emission controlled vehicles.
    See More

    FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1010)

    Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

    from

    $39.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
    • NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
    • SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
    • STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
    • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
    See More

    Edelbrock – Sure Seat Valve Springs for S/B Chevy O.E Cast iron Cylinder Heads (Part No.5703)

    Sure Seat Valve Springs for S/B Chevy O.E Cast iron Cylinder Heads

    from

    $65.99
    Springs made of highest quality spring wire. Springs precision wound to close tolerances. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

    Product Features:
    • For Use With Cast Iron Heads
    • Springs Made of Highest Quality Spring Wire
    • Springs Precision Wound To Close Tolerances
    • Use with Original Equipment Heads Only
    See More

    Mr. Gasket – Valve Cover Gasket Set (Part No.585G)

    Valve Cover Gasket Set

    from

    $29.49
    Molded rubber gaskets are reusable, great for engines that require valve lash maintenance. These gaskets feature Nitrile material for long life, solid steel carrier for strength and rigidity. Incorporates compression limiters to prevent fastener over-tightening.

    Product Features:
    • Features Nitrile Rubber Material For Long Life
    • Molded Rubber Gaskets Are Reusable
    • Ideal For Engine Requiring Valve Lash Maintenance
    See More

    Mr. Gasket – Cylinder Head Dowel Pins (Part No.4375)

    Cylinder Head Dowel Pins

    from

    $14.99
    Dowel pins are precision machined and case hardened for accurate head alignment. Two per set. 5/16 inch x 5/8 inch

    Product Features:
    • Precision Machined
    • Case Hardened
    • Give Accurate Alignment
    • 2 Per Set
    See More

    FEL-PRO Performance – Engine Timing Cover Gasket (Part No.2335)

    Engine Timing Cover Gasket

    from

    $20.29
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Steel core gasket construction
    • Exclusive design permits significantly faster gasket installation while eliminating potential sealing leak paths.
    • Not intended for use in emission controlled vehicles.
    See More

    Edelbrock – Performer Small-Block Chevy Intake Manifold for Street Performance (Part No.3701)

    Performer Small-Block Chevy Intake Manifold for Street Performance

    from

    $339.99


    Product Features:
    • For Idle to 5500 RPM Street-Driven Performance
    • Dual-Plane Low-Rise Intake w/180 Deg Firing Order
    • Patented Runner Design Ensures Broad Torque Curve
    • Excellent Throttle Response and Mid-Range Power
    • 50-State Street Legal if Correct Carburetor Used
    • Accepts Late-Model Choke; Waterneck; and HEI
    • Accepts A/C And Alternator
    • Accepts Exhaust Heated Chokes and Accepts EGR
    See More

    Mr. Gasket – Rear Main Seal Gasket (Part No.1960)

    Rear Main Seal Gasket

    from

    $23.99
    This Mr. Gasket Rear Main Seal is made from silicone to allow the seal to handle extreme engine oil temperature. It also provides for an upgrade for that leaky rope style seal and is a direct replacement for a rubber main seal. It’s also injection molded for a precise fit.

    Product Features:
    • Repairs That Leaky Rear Main Sail
    • Silicone Rubber to Withstand Extreme Engine Oil Temperatures
    • Upgrade for Rope Seal Equipped Cars or Direct Replacement for Rubber Main Seal
    • Injection Molded for Precise Fit
    See More

    B & M – Performance Torque Converter for GM TH400, 350, & 375 Transmissions (Part No.20400)

    Performance Torque Converter for GM TH400, 350, & 375 Transmissions

    from

    $299.99
    Torque Converter – Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost

    Product Features:
    • New Precision Pump Drive Tube
    • Pressure Tested
    • Fully Balanced
    • Needle Thrust Bearing
    • New Thrust Washer
    See More

    Competition Cams – Set of 16 Single Springs w/ 1.254" O.D., 1.254" I.D., 1.700" Installed Height (Part No.981-16)

    Set of 16 Single Springs w/ 1.254" O.D., 1.254" I.D., 1.700" Installed Height

    from

    $126.99
    Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application. The valve spring creation process is far more involved than most people realize. Selecting the right metal stock and creating the best design is not done by chance. COMP Cams has developed a process that creates the highest quality valve spring available. The result is a product that meets and exceeds the expectations of today’s engine builders and racers.

    Product Features:
    • Seat pressure: 105 lbs. @ 1.700″, Open Pressure: 273 lbs. @ 1.250″
    • O.D.: 1.254″, I.D.: .880″
    • Single valve springs with damper
    • Approximately .490″ max lift at recommended installed height
    See More

    Mr. Gasket – Ultra Seal: Head Gasket (Part No.5799G)

    Ultra Seal: Head Gasket

    from

    $68.99
    Mr. Gasket Ultra-Seal Head Gaskets are a five layer (graphite core/perforated steel outer layers) composite construction. The graphite core has excellent thermoconductivity (transfers heat) away from hot spots in head preventing gasket burn-out. They provide excellent stability, compressibility and high temperature endurance. A high temperature silicone coating ensures sealing of engine fluids. Compatible with cast iron or aluminum heads, they will not brinell (indent) aluminum cylinder heads. Suitable for high performance street, drag race and oval track use. Sold individually.brbrGasket Bore 4.130 inch, Compressed thickness 0.055 inch

    Product Features:
    • Five layer (graphite core/perforated steel outer layers) composite construction
    • Graphite core is excellent transfering heat away from hot spots in head preventing gasket burn-out.
    • Provides excellent stability, compressibility and high temperature endurance
    • Coated with high temperature silicone to ensure sealing of engine fluids
    • Will not brinell (indent) aluminum cylinder heads
    • For high performance street, drag race and oval track use
    • Compatible w/High Octane Fuel
    • Compatible With Exotic Fuel
    See More

    Mr. Gasket – Ultra Seal: Head Gasket (Part No.5780G)

    Ultra Seal: Head Gasket

    from

    $64.99
    Mr. Gasket Ultra-Seal Head Gaskets are a five layer (graphite core/perforated steel outer layers) composite construction. The graphite core has excellent thermoconductivity (transfers heat) away from hot spots in head preventing gasket burn-out. They provide excellent stability, compressibility and high temperature endurance. A high temperature silicone coating ensures sealing of engine fluids. Compatible with cast iron or aluminum heads, they will not brinell (indent) aluminum cylinder heads. Suitable for high performance street, drag race and oval track use. Sold individually.brbrGasket Bore 3.870 inch, Compressed thickness 0.028 inch

    Product Features:
    • Five layer (graphite core/perforated steel outer layers) composite construction
    • Graphite core has excellent thermo-conductivity-transfers heat away from hot spots in head preventing gasket burn-out
    • Provides excellent stability, compressibility and high temperature endurance
    • Coated with high temperature silicone to ensure sealing of engine fluids
    • Will not brinell (indent) aluminum cylinder heads
    • For high performance street, drag race and oval track use
    • Compatible w/High Octane Fuel
    • Compatible With Exotic Fuel
    See More

    Mr. Gasket – Intake Gasket (Part No.116)

    Intake Gasket

    from

    $40.19
    Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. They provide excellent sealing and durability. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track.

    Product Features:
    • Manufactured from cellulose/nitrile composition gasket material.
    • Provides excellent sealing and durability.
    • Can be trimmed if necessary for modified port applications.
    • Complete with manifold end seals and distributor gasket.
    • For OE replacement, high performance street, drag race and oval track use.
    See More

    Mr. Gasket – Head Gasket (Part No.1130G)

    Head Gasket

    from

    $32.99
    Mr. Gasket Steel Shim Cylinder Head Gaskets are for high performance street machines, drag racing and oval track racing. With today’s extreme compression ratios you need stronger more durable gaskets. Mr. Gasket steel shim gaskets are made from .020 inch steel shim stock which is thinner than most composite gaskets increasing engine compression. Stress formed embossments will seal the extreme cylinder pressure.

    Product Features:
    • Manufactured from .020″ steel shim stock.
    • Thinner than composition head gaskets – increases engine compression.
    • Stress formed embossments seal extreme cylinder pressures.
    • For high performance street, drag race and oval track use.
    See More

    Edelbrock – Performer-Plus Camshaft Kit for Buick 231-252 V6 Even Fire (Part No.5487)

    Performer-Plus Camshaft Kit for Buick 231-252 V6 Even Fire

    from

    $367.99


    Product Features:
    • Designed for Optimum Torque and Acceleration
    • Maximum Performance From Idle through Mid-Range
    • Matched To Performer Intake PN[5486]
    • Includes Hydraulic Lifters and Assembly Lube
    • Major Improvement in Throttle Response and Torque
    • Use For Daily Drivers/Trucks/Vans/RVs/4x4s
    • Take The Guesswork Out Of Camshaft Selection
    See More

    Edelbrock – Performer EPS Intake Manifold w/ Oil Fill Tube for 1955-86 Small-Block Chevy (Part No.2703)

    Performer EPS Intake Manifold w/ Oil Fill Tube for 1955-86 Small-Block Chevy

    from

    $322.99
    Edelbrock part #2703 Performer EPS intake manifold is designed for 1986 and earlier 262-400 cubic-inch Chevys. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent thro

    Product Features:
    • Idle-5500 RPM Range
    • Dual Plane Type-4150 Style Flange
    • 3.74 in. Front Height, 4.27 in. Center Height, 4.8 in. Rear Height
    • Satin Finish
    • Non-EGR W/ Oil Fill Tube
    See More

    Edelbrock – Pushrod Set for S/B Chevy (Part No.9629)

    Pushrod Set for S/B Chevy

    from

    $187.99


    Product Features:
    • Case-Hardened Tubing
    • Surface Hardening
    • Welded Ends
    • 0.3125 in. Diameter
    • Use with or without Hardened Steel Guideplates
    See More

    Competition Cams – CAMSHAFT, SBC 295 BIG MUTHA THUMPR HYDRAULIC 1 EA (Part No.12-602-4)

    CAMSHAFT, SBC 295 BIG MUTHA THUMPR HYDRAULIC 1 EA

    from

    $529.99
    Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods, the Thumpr series’ early i

    Product Features:
    • Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
    • Best with aftermarket converters and more rear gear.
    • Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
    See More

    Competition Cams – CAMSHAFT, SBC 284 XTREME ENERGY HYDRAULIC 1 EA (Part No.12-250-3)

    CAMSHAFT, SBC 284 XTREME ENERGY HYDRAULIC 1 EA

    from

    $258.99
    Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,

    Product Features:
    • Excellent performance in street carbureted applications.
    • More vacuum allows an increase in duration for improved performance and assists power brakes.
    • Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
    • Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
    See More

    Competition Cams – Magnum 7.800" Long, .080" Wall, 3/8" Diameter Pushrod Set (Part No.7513-16)

    Magnum 7.800" Long, .080" Wall, 3/8" Diameter Pushrod Set

    from

    $157.99
    Magnum Pushrods from COMP Cams offer an affordable solution for your .080″ wall chromemoly pushrod needs. Designed to withstand the stresses of a high performance engine, Magnum Pushrods are head-treated for extended durability and have precision formed, reinforced ends. Magnum Pushrods are black-oxide finished with their part number and length laser etched onto the surface for easy identification.

    Product Features:
    • 3/8″ Diameter, 7.800″ Length
    • Magnum Pushrods for Small Block Chevy
    • One-piece .080″ wall chromemoly steel tubing
    • Heat-treated for extended durability and guide plate compatibility
    • Precision formed and reinforced pushrod end
    See More

    Mr. Gasket – Ultra Seal: Competition Screw-In Rocker Arm Studs (Part No.1075)

    Ultra Seal: Competition Screw-In Rocker Arm Studs

    from

    $94.99
    Mr. Gasket competition screw-in rocker arm studs are manufactured from heat treated black oxide coated Grade 8 steel. Ideal for high performance street and race applications.

    Product Features:
    • Black Oxide Coated Grade 8 Steel
    • Kit Contains 16 Studs
    • Easy To Install
    • Heat Treated Steel
    • Prevents Stud Flexing
    • Black Plated Finish
    See More

    FEL-PRO Performance – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.1000)

    Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts

    from

    $59.99
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
    • Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
    • Raises combustion sealing force to roughly three times that of standard head gaskets.
    • Steel wire rings for the greatest combustion seal strength.
    • Not intended for use in emission controlled vehicles.
    See More

    Mr. Gasket – Ultra Seal: Screw-In Rocker Arm Studs (Part No.1076)

    Ultra Seal: Screw-In Rocker Arm Studs

    from

    $65.99
    Mr. Gasket screw-in rocker arm studs are manufactured from heat treated black oxide coated Grade 8 steel. Ideal for high performance street applications. OE style press in rocker studs can actually pull out of the cylinder head when using high lift camshafts. Includes sixteen studs 3/8-24 x 1.47 inch long top x 7/16-14 bottom.

    Product Features:
    • Black Oxide Coated Grade 8 Steel
    • Kit Contains 16 Studs
    • Easy To Install
    • Heat Treated Steel
    • Grade 8 Steel
    See More

    Mr. Gasket – Engine Sealing (Part No.6560)

    Engine Sealing

    from

    $499.99
    Manufactured from cellulose and nitrile composition gasket material. A black latex rubber coating is applied to outside of gasket to help seal minor oil pan rail irregularities and eliminate the possibility of oil leakage. Provides excellent sealing and durability. Complete with molded rubber front/rear oil pan seals where applicable. For OE replacement, high performance street, drag race and oval track.

    Product Features:
    • Made of high temp silicone or nitrile blend rubber
    • Torque limiters to prevent over tightening
    • One piece molded rubber
    • Fits left and right hand dipsticks
    See More

    Mr. Gasket – Intake Gasket (Part No.143)

    Intake Gasket

    from

    $42.49
    Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. This is a low density material that conforms well to irregular surfaces and has very good crush resistance at high flange pressures. They provide excellent sealing and durability as the material is designed for sealing gasoline, oils, water and coolant in applications up to 350 degrees Fahrenheit. While die-cut for an excellent fit, they can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track.

    Product Features:
    • Manufactured from cellulose/nitrile composition gasket material
    • Provides excellent sealing and durability
    • Die-cut for an excellent fit
    • Can be trimmed if necessary for modified port applications
    • For OE replacement, high performance street, drag race and oval track use
    See More

    Edelbrock – Intake Manifold replacement base to top gasket (Part No.6999)

    Intake Manifold replacement base to top gasket

    from

    $17.99
    Replacement gasket for top to bottom. See PN(7110) complete. PN(7067) bottom. PN(7032) top. Includes base and top for intake manifold PN(7110).

    Product Features:
    • Replacement Gasket for Top to Bottom
    • See PN[7110]Complete; PN[7067]Bottom; PN[7032] Top
    See More

    Edelbrock – Performer Buick 3.8L, 4.1L V6 Intake Manifold (Part No.5486)

    Performer Buick 3.8L, 4.1L V6 Intake Manifold

    from

    $381.99


    Product Features:
    • For Idle to 5500 RPM Street-Driven Performance
    • Dual-Plane Low-Rise Intake w/180 deg. Firing Order
    • Patented Runner Design Ensures Broad Torque Curve
    • Excellent Throttle Response and Mid-Range Power
    • Not for C-3 and C-4 Electronic Fuel Mngmt Systems
    See More

    Mr. Gasket – Ultra Seal: Sure-Lock Rocker Arm Nuts (Part No.923G)

    Ultra Seal: Sure-Lock Rocker Arm Nuts

    from

    $87.19
    Designed to keep the rocker arms positively locked for precise and critical valve train adjustments. Manufactured from quality grade steel, then heat-treated for extra strength and plated with a durable finish. Kits include 16 rocker arm nuts with socket head set screws and one hex key wrench.

    Product Features:
    • (16) Rocker Arm Nuts w/ Locks 3/8″-24 Threads
    • Shank O.D. .540″
    • Includes Locks and Hex Wrench
    • High-Quality Grade Steel
    • Heat-Treated For Ex Strength
    • Plated With Durable Gold Tone Finish
    See More

    Top-Rated Performance and Racing Products Brands For Your 1978 Oldsmobile Cutlass

    Shop for the best-rated brands offering Performance and Racing Products and other products for your 1978 Oldsmobile Cutlasses. Below you’ll find some of our best rated Performance and Racing Products from K&N, Mr. Gasket, and Edelbrock, and more. Performance and Racing Products from these brands that fit a 1978 Cutlass start at just $9.99 and are rated as high as 5 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

    Popular K&N 1978 Oldsmobile Cutlass Performance and Racing Products

    When it comes to maintaining or upgrading your 1978 Oldsmobile Cutlass, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. K&N ticks all of those boxes. We offer a wide selection of K&N Performance and Racing Products, specifically designed for the 1978 Oldsmobile Cutlass. With over 1 K&N brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $17.99. Plus, with over 35 customer reviews and an average rating of 5 stars, you can trust that our K&N Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

    Popular Mr. Gasket 1978 Oldsmobile Cutlass Performance and Racing Products

    Mr. Gasket auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1978 Oldsmobile Cutlass owner should feel confident when installing genuine Mr. Gasket parts in their vehicle. To ensure the best fit and performance for your 1978 Cutlass, Advance Auto Parts carries a full inventory of 45 Mr. Gasket Performance and Racing Products. Plus you will be keeping your Oldsmobile in peak condition while saving money because prices on these Mr. Gasket Performance and Racing Products range from $9.99 to $499.99, plus, with more than 45 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

    Distributor Hold-Down Clamp
    from
    $9.99
    This product is not rated

    Distributor Hold-Down Clamp

    “”

    Aluminum Exhaust Gasket: High-Heat Resistant, Easy Removal
    from
    $42.99
    This product is not rated

    Aluminum Exhaust Gasket: High-Heat Resistant, Easy Removal

    “”

    Oil Pan Bolt Kit
    from
    $17.49
    This product is not rated

    Oil Pan Bolt Kit

    “”

    FAQs for 1978 Oldsmobile Cutlass Performance and Racing Products

    Which Performance and Racing Products are best-sellers for 1978 Oldsmobile Cutlasses?

    Out of 234 Performance and Racing Products that fit 1978 Oldsmobile Cutlasses, the following parts are the top sellers:

    What’s the price range for 1978 Oldsmobile Cutlass Performance and Racing Products?

    Performance and Racing Product prices for the 1978 Oldsmobile Cutlass start at $9.99 and go up to $1,268.99 for the most premium parts.

    What’s the average price of a Performance and Racing Product for a 1978 Oldsmobile Cutlass?

    The average price for Performance and Racing Products for the 1978 Oldsmobile Cutlass is $256.08. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

    Does Advance Auto Parts sell Performance and Racing Products for other Oldsmobile Cutlass model years?

    Yes, we currently carry Performance and Racing Products for 26 model years of Oldsmobile Cutlasses between 1961 and 1999. Performance and Racing Products are bought most frequently for the following model years: 1999, 1998, 1997, 1988, 1983, 1982, 1981, 1980, and 1979.

    What are the cheapest Performance and Racing Products for my 1978 Oldsmobile Cutlass?

    The cheapest 1978 Oldsmobile Cutlass Performance and Racing Products we carry in stock are:

    What are the top-rated Performance and Racing Products that fit the 1978 Oldsmobile Cutlass?

    Out of 1,242 reviews by customers, our 1978 Oldsmobile Cutlass Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1978 Oldsmobile Cutlass and their top-rated products:

    Can I get help with 1978 Oldsmobile Cutlass Performance and Racing Product orders?

    Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Oldsmobile Performance and Racing Products and more.

    What is your return policy for Oldsmobile Cutlass Performance and Racing Products?

    Advance Auto Parts keeps returns simple. For new Oldsmobile Cutlass Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.