1978 Nissan 810 Fuel and Emissions Systems
More 1978 Nissan 810 Fuel and Emissions Systems Categories
If you’re looking for an original Fuel and Emissions Systems replacement for a 1978 Nissan 810, you can search through our selection below. You’ll also find aftermarket and OEM Fuel and Emissions Systems to meet your needs.
Essential 1978 Nissan 810 Fuel and Emissions Systems
Carquest Premium – Locking Fuel Cap (Part No.10583)
from
$19.79
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Protects your fuel from theft and vandalism
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Carquest Premium – Exhaust Gas Recirculation (EGR) Valve (Part No.EGC1302)
from
$51.99
The EGR system is an emission control device designed to recirculate exhaust gas into the engines air intake system and back to the combustion chamber to control nitrogen oxides or NOx. The chemical NOx is created when oxygen and nitrogen are heated above 2,800-degree F. Exhaust gas, or gas that is displaced from the combustion chamber, contains little to no oxygen molecules. By recirculating this gas back into the combustion chamber fewer oxygen molecules are available for the combustion event which will therefore create a cooler combustion event. The EGR valve can be actuated by engine vacuum or electronically by the engine control module.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Our EGR valves are designed to match the vehicle specific exhaust gas flow rate as designed by the engine manufacturer to provide clean tail pipe emissions.
- Feedback EGR valves and pressure sensors contain a robust circuit board design which increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- Where applicable stainless-steel sleeves used over cold rolled sleeves providing smooth EGR pintle operation under all operating conditions.
Ishino – Fuel Injector Seal (Part No.C101017633ISH)
from
$1.99
Fuel Injector Seal
Ishino – Fuel Injector Seal (Part No.C101017634ISH)
from
$1.48
Fuel Injector Seal
Carquest Premium – Reman Multi Port Fuel Injector (Part No.A213-1034)
from
$52.99
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.
Product Features:
See More
Product Features:
- Each unit is 100% tested to OE specifications
- Includes new O-rings and seals made of premium OE quality materials
- Includes application specific technical bulletin, where applicable
Carquest Premium – Multi Purpose Relay (Part No.RAA1277)
from
$17.79
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Dorman – Help – Preheater Hose (Part No.96130)
from
$12.99
Available in a variety of diameters, Dorman’s HVAC Control Duct Hose is flexible, strong, and easy to install. It helps return your vehicle’s HVAC system to its original performance.
Product Features:
See More
Product Features:
- Carburetor Preheater Hose – ID: 40 mm – Length 18″ – Fiberglass – Aluminum
- Preheater Hose
- Available in a variety of diameters, Dorman’s HVAC Control Duct Hose is flexible, strong, and easy to install. It helps return your vehicle’s HVAC system to its original performance.
- High-strength fiberglass/aluminum construction helps prevent cracking
- May be cut to desired length
Carquest Premium – Barometric Pressure Sensor Connector (Part No.PTA1104)
from
$21.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest Premium – Multi Purpose Relay (Part No.ACA1431)
from
$61.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Multi Purpose Relay (Part No.RAA3066)
from
$15.79
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Exhaust Gas Recirculation (EGR) Valve Gasket (Part No.EVA1004)
from
$7.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Felpro – Exhaust Gas Recirculation (EGR) Valve Gasket (Part No.70978)
from
$1.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Validated for fit, form and function
- Unsurpassed quality you can trust
Fuel Injection Corp. – Fuel Injector Holder (Part No.C103032924FIC)
from
$5.12
Fuel Injector Holder
Nippon Reinz – Fuel Injector Seal Kit (Part No.C106052128NRZ)
from
$26.76
NIPPON REINZ engineers work with OEMs to develop complete engine sealing solutions for gasoline, diesel, and alternative energy vehicles. We employ custom sealing solutions through our expert problem solving utilizing our regional research and development centers. As an Integral Partner with Virtually Every major vehicle and engine manufacturer worldwide, NIPPON REINZ offers a comprehensive range of sealing Innovative Systems, INCLUDING Head gaskets, Heat shields, sealing modules, secondary gaskets, Valve stem Seals, and transmission components. Each kit contains: 16635-N1400 upper insulator (1), 16636-N1400 lower insulator (1), and 16612-N8500 injector holder (1).
See More
Bosch – Oxygen Sensor: 1 Wire, 8.35" Long, Non-heated, Exact Fit (Part No.12046)
from
$39.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation advancements. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance. Bosch oxygen sensors deliver exceptional OE level reliability, performance and durability, further improving service life of the product.
Product Features:
See More
Product Features:
- Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
- Direct Fit includes OE Connector for easy installation
- Performance meets or exceeds OE specifications
- True Direct-fit OE connectors and harness
Bosch – Oxygen Sensor: 1 Wire, 5.31" Long, Non-heated, Universal Fit (Part No.11027)
from
$32.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation advancements. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance. Bosch oxygen sensors deliver exceptional OE level reliability, performance and durability, further improving service life of the product.
Product Features:
See More
Product Features:
- Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
- Includes Smart Link Connector, no soldering required
- No special tools required for installation
- Seared protection tube due to 100% functional quality test
- Performance meets or exceeds OE specifications
BSE Original – Air Flow Meter (Part No.27756)
from
$88.99
Blue Streak Electronics is the leader in remanufactured electronics since 1987 and a name synonymous with OE performance. Blue Streak Electronics provides the highest quality, most comprehensive line of Engine, Transmission, Body, Powertrain control modules, Mass Air Flow Sensors, Diagnostic tools and Flash Programming solutions.
Product Features:
See More
Product Features:
- BSE mass air flow sensors are 100% tested to perform like new. OEM designs are analyzed, and design upgrades are implemented when necessary to provide improved durability over the OEM design.
- We use automated computerized test equipment to ensure functionality and reliability.
- All Mass Airflow sensors are validated for extended run, extreme hot and cold, over-voltage, over-current, and shock and vibration.
- All parts are THE ORIGINAL parts your car was built with. All parts are validated for on car fit, form, and function.
BSE Original – Air Flow Meter (Part No.27757)
from
$204.99
Blue Streak Electronics is the leader in remanufactured electronics since 1987 and a name synonymous with OE performance. Blue Streak Electronics provides the highest quality, most comprehensive line of Engine, Transmission, Body, Powertrain control modules, Mass Air Flow Sensors, Diagnostic tools and Flash Programming solutions.
Product Features:
See More
Product Features:
- BSE mass air flow sensors are 100% tested to perform like new. OEM designs are analyzed, and design upgrades are implemented when necessary to provide improved durability over the OEM design.
- We use automated computerized test equipment to ensure functionality and reliability.
- All Mass Airflow sensors are validated for extended run, extreme hot and cold, over-voltage, over-current, and shock and vibration.
- All parts are THE ORIGINAL parts your car was built with. All parts are validated for on car fit, form, and function.
Carquest Premium – Fuel Pump (Part No.E359450)
from
$125.99
Carquest Premium electric fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
- OE upgraded turbine impellers greatly reduce fuel pulsation
- All fuel pumps are 100% performance tested
Delphi – Electric Fuel Pump: With Extra Fitting, Isolator Strips, Seal, Splices, Terminal Hardware (Part No.FD0035)
from
$143.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
- Improved pump performance as a result of Delphi’s innovative design and durability
- Restores fast pressure performance and system integrity, translating to better pumping through less energy
- Part is validated, tested and matched to the right vehicle application
- Lower amperage draws less load on vehicle’s electrical system
- Always be sure to check and clean fuel tank to avoid unnecessary returns
- Always replace the fuel strainer when doing a fuel pump repair
KAI – Electric Fuel Pump (Part No.FMD010118)
from
$124.99
New Platinum Pro Electric Fuel Pump
Product Features:
See More
Product Features:
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
ACDelco – Multi-Purpose Wire Connector with Leads (Part No.PT2164)
from
$16.79
ACDelco Professional Air Charge Temperature Sensor Connector is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, starting and charging, body-electrical and lighting, and/or engine fuel management. This premium aftermarket connector is manufactured to meet or exceed your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
Popular 1978 Nissan 810 Fuel and Emissions Systems Categories
1978 Nissan 810 Fuel and Emissions Systems
You count on your 1978 Nissan 810 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 24 Fuel and Emissions Systems ranging in price from $1.48 to $143.99, you’re sure to find everything you need for your 1978 Nissan 810.
Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 12 different brands like Felpro, Delphi, and Bosch. 1978 Nissan 810 Fuel and Emissions Systems start as low as $1.48!
One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 62 extensive product reviews on 1978 Nissan 810 Fuel and Emissions Systems. Some of the top-rated Fuel and Emissions Systems products we carry are Switching Oxygen Sensor: 1 Wire, 10.75" Long, Non-Heated, Direct Fit with 4.5 stars.
Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 1978 Nissan 810 below to get started!
Top-Rated Fuel and Emissions Systems Brands For Your 1978 Nissan 810
Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1978 Nissan 810 running right for years to come. In our inventory you’ll find brands like Felpro, Delphi, Bosch, and even more.
Popular Carquest Premium Fuel and Emissions Systems
You’ll find popular Carquest Premium brand products across Gas Caps. All are waiting to get your 1978 Nissan 810 back on the road. Some of the top-rated Carquest Premium products in these categories are:
Top-Rated Fuel and Emissions Systems
If are what you’re looking for, our inventory holds plenty. We stock brand Fuel and Emissions Systems for your 1978 Nissan 810, and some of our most reviewed parts include:
FAQs for 1978 Nissan 810 Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the 1978 Nissan 810?
Out of 24 Fuel and Emissions Systems for the 1978 Nissan 810, the most popular in our inventory are:
What are the top-rated 1978 Nissan 810 Fuel and Emissions Systems?
Top-rated Fuel and Emissions Systems for your 1978 Nissan 810 based on customer reviews/ratings are:
from
$49.99
(2)
Switching Oxygen Sensor: 1 Wire, 10.75" Long, Non-Heated, Direct Fit
“Nice and easy, better than the oem by far.”
