1978 Ford Fairmont Performance and Racing Products

Essential 1978 Ford Fairmont Performance and Racing Products

Mallory – Distributor Wiring Harness (Part No.29349)

Distributor Wiring Harness

from

$30.49


Product Features:
  • Service Part
  • Makes Connections Quick And Easy
See More

MSD Ignition – Starter; Small Block Ford 289; 302; 351W 5.0L (Part No.5090)

Starter; Small Block Ford 289; 302; 351W 5.0L

from

$438.99
Our advanced power system line has grown to include starters. Our new APS starter is designed to crank over the highest compression engines on a hot day in Death Valley. Not that too many race cars are sitting in Death Valley, but it’s good to know that you have the oomph to make it happen. The APS starter features all new components beginning with a three horsepower motor. This power is used to crank over the reduced 4.4:1 gear set to deliver great torque to the engine’s ring gear to get the engine turning. The armature is balanced during assembly and is guided by two ball bearings for smooth engagement and thousands of starts. The downsized housing clears most headers and oil pans, but just in case, we made the billet mount so it can be clocked in different positions to help in tight applications. The assembly is powder coated MSD red and will stay looking good, even though it’s underneath your car.

Product Features:
  • Mount Can Be Clocked To Assist In Mounting
  • Downsized design helps clearance issues w/oil pans and exhaust
  • Ball bearing supported armature and pinion gear
  • 3 Hp Motor Provides Power For High Compression Engines
  • Gear reduction of 4.4:1 improves torque for great cranking
See More

Edelbrock – RPM Air-Gap #7521 Intake Manifold for Small-Block Ford 302-331-347 V8 (Part No.7521)

RPM Air-Gap #7521 Intake Manifold for Small-Block Ford 302-331-347 V8

from

$432.99
Edelbrock Part #7521 RPM Air-Gap intake manifold is designed for the small-block 302 CID Ford V8 or 331-347 stroker applications. The RPM Air-Gap incorporates the same race-winning technology that?s been used on our Victor Series competition intakes and i

Product Features:
  • RPM Air-Gap for 302-331-347 Small-Block Ford V8
  • Air-Gap design features an open air space under the plenum
  • Separates fuel and air from engine heat
  • Larger runners over standard 7121 manifold
  • Includes nitrous bosses
See More

Mr. Gasket – Enhancement Products (Part No.8830)

Enhancement Products

from

$70.99
Replace your stock black engine pulleys with a pair of chrome plated steel pulleys from Mr. Gasket. The pulleys are highly polished then chrome plated for lasting beauty.

Product Features:
  • Highly polished for lasting beauty
See More

Holley – Mechanical Fuel Pump (Part No.12-289-13)

Mechanical Fuel Pump

from

$200.99
Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.

Product Features:
  • High Output Fuel Flow
  • Flows 130+ gph Free Flow
  • Shutoff Pressure Pre-Set From 7.5 To 9 PSI
  • Fuel Pressure Regulator Is Not Required
  • Heavy Duty Construction For Continuous High rpm Operation
  • Redesigned High Flow Valves Always Ensure Adequate Fuel Delivery
  • Fuel Body Casting Can Be Rotated For Plumbing Situations
  • Inlet And Outlet Tapped For 3/8 in. NPT
See More

B & M – Flexplate, Small Block Ford 28.2 Ounce 157 Tooth (Part No.50236)

Flexplate, Small Block Ford 28.2 Ounce 157 Tooth

from

$153.99
As performance levels increase, an O.E. style flexplate just won’t cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flexplate designed for Ford, Lincoln and Mercury (externally balanced) 289 and 302ci V8 engines with 28.2 ounce imbalance. Features include high tensile strength steel to resist elongation and cracking, 10.50 inch bolt pattern and 157 tooth ring gear. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M flexplates are ideal for hot rods, street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953. Compatible with C4 and C6 automatic transmissions.

Product Features:
  • NHRA/IHRA Legal For All Classes
  • Includes SFI Certification Sticker
  • Ideal For Street Applications
  • To Extreme Duty Racing
  • To High RPM Use
See More

Accel – Universal Fit Graphite Suppression; Spark Plug Wire Set (Part No.8026)

Universal Fit Graphite Suppression; Spark Plug Wire Set

from

$128.99
These ACCEL carbon and graphite core wire sets virtually eliminate RFI noise, while providing maximum conductivity for ultimate performance in any race or street application. Double silicon insulation eliminates leakage and misfire.

Product Features:
  • Heavy Duty 8.8mm Oversized Silicone Jacket
  • 500 Ohms/ft. Of Resistance
  • 550 Degree Double Silicone Construction
  • Fiberglass Braid
  • Carbon/Graphite Core
  • Magnetic Suppression
  • Fiberglass/Kevlar Core
  • 500 Ohms Resistance
See More

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1468)

Exhaust Manifold Gasket Set

from

$45.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
  • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
  • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
  • Slotted bolt holes allow for easier header installation.
  • Not intended for use in emission controlled vehicles.
See More

Mr. Gasket – Oil Pan Bolt Kit (Part No.6087)

Oil Pan Bolt Kit

from

$30.19
The special self locking oil pan bolts, use a smaller-than-standard hex head is ideal for tight spaces. Because of the hex flange head design, it will not fall back into the socket wrench, allowing for easier installation. Special under head serrations prevent loosening and the wide flange head distributes uniform clamping pressure for an ultra gasket seal. Bolts are zinc plated, grade 5.

Product Features:
  • Ideal For Tight Spaces
  • Serrations Prevent Loosening
  • Flange Distributes Pressure
  • Zinc Plated Bolts
  • Grade 5 Material
  • Easy Installation
See More

Edelbrock – SBF Timing Cover, 65-78 289(non K-Code) & 302 69-87 351 (Part No.4250)

SBF Timing Cover, 65-78 289(non K-Code) & 302 69-87 351

from

$210.99


Product Features:
  • Designed for 1500 to 7000 Performance
  • Large Plenum
  • Long Tapered Runners
  • 90mm. Throttle Body Opening
  • Polished Finish
See More

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1613)

Engine Valve Cover Gasket Set

from

$27.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
  • Not intended for use in emission controlled vehicles.
See More

Accel – Supercoil (Part No.140001)

Supercoil

from

$105.99
Engineered for faster rise time, longer spark duration and increased performance. Unique design with premium grade wire, special low resistance, high turns ratio windings. Produces higher spark energy with breakerless electronic ignition systems. For points application the supplied 0.85 ohm ballast resistor must be used in conjunction with the vehicle original ballast resistor, if so equipped. Oversized molded case with integral cooling fins and high capacity oil filled construction provide high thermal conductivity ensuring cool operation and long life. Extra tall tan Alkyd tower and integral voltage dam eliminate “flashover” to primary terminals. Comes complete with mounting hardware and 0.85 ohm ballast resistor. Effective up to 6,500 RPM.

Product Features:
  • Oil Filled For Better Cooling
  • Optimized Low Resistance
  • Silicon Magnetic Steel E-Core
  • Higher Energy/Voltage Outputs
  • Quicker Starts
  • Improved Idle Quality
  • Resists Shock And Vibration
  • Resists Corrosion
See More

B & M – Shift Improver Kit (Part No.50262)

Shift Improver Kit

from

$72.99
Shift Improver Kit – 1970 to 1982 Ford, Lincoln, Mercury C4 Application: 1970 to 1982 Ford, Lincoln, Mercury C4 Recalibrate your automatic transmission for optimum performance and extended life! Select the mode that best suits your application Provides crisp shifts on any stock automatic transmission Eliminates shift overlap and excess wear on clutches and bands due to slippage The B&M Shift Improver Kit the easiest way to get the stout performance you’ve always wanted out of your automatic transmission – and you get two modes of performance to select from: Heavy Duty, or Street/Strip. It’s our least expensive and simplest to install kit. All you need are some hand tools! In the space of an afternoon, you can turn your transmission into a B&M-tuned unit! Ask the thousands of satisfied customers that have installed one in their transmissions! STAGE 1. HEAVY DUTY Firm positive shifts without loss of driver comfort for improved performance in all street vehicles. Recommended for regular passenger vehicles. STAGE 2. STREET/STRIP Provides positive shifts for high performance street use or for competitive events. This level is for the enthusiast who wants the hardest, quickest possible shift.

Product Features:
  • Provides Crisp Shifts
  • On Any Stock Automatic Transmission
  • Eliminates Soft/Sluggish Shift
  • Eliminates Shift Overlap
  • Eliminate Clutch and Band Wear
  • Improves Transmission Life
  • Transmission Removal Not Required
See More

Mr. Gasket – Thermocap Radiator Cap (Part No.2470R)

Thermocap Radiator Cap

from

$48.09
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

Product Features:
  • Indicates coolant temperature
  • Helps prevent coolant injuries
  • Fahrenheit and centigrade readings
  • Color-coded temperature ranges
  • Integrated coolant reclamation valve
  • Improves under-hood appearance
  • Chromed crown with a colored trim ring
See More

MSD Ignition – Distributor Cap/Rotor Kit; Ford Duraspark (Part No.8450)

Distributor Cap/Rotor Kit; Ford Duraspark

from

$56.99
The cap and rotor of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set. To make things easy, we now offer these cap and rotor replacement kits.

Product Features:
  • Designed w/Performance In Mind
  • High Quality Material
  • Stainless Terminals
See More

Spectre – Spectre Replacement Air Filter (Part No.HPR3300)

Spectre Replacement Air Filter

from

$31.49
Spectre’s High Performance Replacement Air Filters are engineered to outperform ordinary paper filters by providing increased air flow for improved performance. Manufactured using high quality materials including pre-dyed synthetic media, urethane, and steel mesh, this performance air filter is factory pre-oiled and ready to use.

Product Features:
  • High performance and high air flow filter
  • Filter media is non-woven synthetic and pre-dyed
  • Replaces stock air filter
  • Easy to install with no special tools or skills required
  • Reinforced with a steel mesh
See More

Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)

High Performance 180 Degree Thermostat for Increased Flow

from

$26.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:
  • Opens At 180 Degrees
  • Designed to Resist Large Variations of Coolant Pressure at High RPM
  • Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
  • For High Performance Street, Drag Race, and Oval Track
  • Copper & Brass Construction – Resists Corrosion
  • High Flow
See More

Edelbrock – Performer-Link Adjustable True-Roller Timing Chain Set (Part No.7820)

Performer-Link Adjustable True-Roller Timing Chain Set

from

$67.99


Product Features:
  • Solid Bushing Chain Resists Stretching
  • For Use with Stock or Edelbrock Camshafts
  • Stressproof Steel Crank Gears
  • 3 Keyway Setting Points To Ensure Accurate Timing
  • True Bearing Surface Rolls with the Sprockets
  • For Engine with One-Piece Fuel Pump Eccentric
See More

Edelbrock – Performer Series Retainer (Qty 16) (Part No.9724)

Performer Series Retainer (Qty 16)

from

$100.99
Product Features:
  • Use W/ Valve Springs Part #5822, 5882, 5896, 5872, 5867, 5812, 5857
  • Set of 16
  • 1.50 in. Outside Diameter
  • Steel Material
  • Black Oxide Finish
See More

Mr. Gasket – Super Intake Manifold Bolts (Part No.6082)

Super Intake Manifold Bolts

from

$43.99
Super Intake Manifold Bolts

Energy Suspension – Control Arm Bushing Set (Part No.4.3132G)

Control Arm Bushing Set

from

$76.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:
  • Maintains Better Alignment While Driving
  • Full Floating and Non Binding
  • Fits Into the Remaining Stock Control Arms
See More

Competition Cams – High Energy 206/206 Hydraulic Flat Cam for Ford 221-302 (Part No.31-215-2)

High Energy 206/206 Hydraulic Flat Cam for Ford 221-302

from

$550.99
Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications. Offering

Product Features:
  • Good blend of efficiency and performance.
  • Perfect choice for performance street rebuilds.
  • Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
See More

Earls Performance Product – Solo Bleed (Part No.280021ERL)

Solo Bleed

from

$32.59


Product Features:
  • Prevents Air Inclusion
  • Direct Replacement
  • For OE Bleeders
  • One Person Bleeds Safely
  • Without The Mess
  • No Chance Of Air Bubbles
See More

Mr. Gasket – Ultra Seal: Harmonic Balancer Bolt/Washer Kit (Part No.7847)

Ultra Seal: Harmonic Balancer Bolt/Washer Kit

from

$38.49
Mr. Gasket Harmonic Balancer Bolt for Ford V8 except 351C. Fits 221,260,289,302,351W small block Windsor engines, 332,352,360,390,406,410,427,428 FEs, and 429,460 385 series big blocks. 5/8-18 x 2 inch long heat treated black oxide coated Grade 8 alloy steel with a thick parallel ground washer to provide accurate, uniform torque.

Product Features:
  • Heat treated black oxide coated Grade 8 alloy steel
  • Thick parallel ground washer provides more accurate, uniform torque
  • Hex Prevents Socket Slippage
  • Accurate And Uniform Torque
  • Black Plated Finish
See More

Mr. Gasket – Ultra Seal: Sure-Lock Rocker Arm Nuts (Part No.923G)

Ultra Seal: Sure-Lock Rocker Arm Nuts

from

$87.19
Designed to keep the rocker arms positively locked for precise and critical valve train adjustments. Manufactured from quality grade steel, then heat-treated for extra strength and plated with a durable finish. Kits include 16 rocker arm nuts with socket head set screws and one hex key wrench.

Product Features:
  • (16) Rocker Arm Nuts w/ Locks 3/8″-24 Threads
  • Shank O.D. .540″
  • Includes Locks and Hex Wrench
  • High-Quality Grade Steel
  • Heat-Treated For Ex Strength
  • Plated With Durable Gold Tone Finish
See More

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1035)

Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

from

$82.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
  • Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
  • Raises combustion sealing force to roughly three times that of standard head gaskets.
  • Steel wire rings for the greatest combustion seal strength.
  • Not intended for use in emission controlled vehicles.
See More

Richmond Gear – Differential Ring And Pinion (Part No.49-0111-1)

Differential Ring And Pinion

from

$333.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:
  • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
  • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
  • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
  • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
  • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
See More

PerTronix – D4061 Flame-Thrower HEI Distributor Rotor Red (Part No.D4061)

D4061 Flame-Thrower HEI Distributor Rotor Red

from

$15.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provi

Product Features:
  • PerTronix D4061 Flame-Thrower HEI Distributor Rotor Red
  • Made from hi-performance 60 KV rated alkyd molding compound.
See More

1978 Ford Fairmont Performance and Racing Products

You count on your 1978 Ford Fairmont to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 115 Performance and Racing Products ranging in price from $5.99 to $664.99, you’re sure to find everything you need for your 1978 Ford Fairmont.

Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 20 different brands like K&N, Accel, and Mr. Gasket. 1978 Ford Fairmont Performance and Racing Products start as low as $5.99!

One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 758 extensive product reviews on 1978 Ford Fairmont Performance and Racing Products. Some of the top-rated Performance and Racing Products products we carry are Water Neck with 3.8 stars and High Perf. Full-Flow Lube Spin-on with 4.0 stars.

Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 1978 Ford Fairmont below to get started!

Top-Rated Performance and Racing Products Brands For Your 1978 Ford Fairmont

Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1978 Ford Fairmont running right for years to come. In our inventory you’ll find brands like K&N, Accel, Mr. Gasket, and even more.

Popular Proform Performance and Racing Products

You’ll find popular Proform brand products across Performance Distributors. All are waiting to get your 1978 Ford Fairmont back on the road. Some of the top-rated Proform products in these categories are:
Ford HEI Distributor, Red Cap, For Ford 289-302 V8 Engines
from $228.99
(4)
Ford HEI Distributor, Red Cap, For Ford 289-302 V8 Engines
Performance Distributors

FAQs for 1978 Ford Fairmont Performance and Racing Products

What are the most purchased Performance and Racing Products for the 1978 Ford Fairmont?

Out of 115 Performance and Racing Products for the 1978 Ford Fairmont, the most popular in our inventory are:
High Performance 180 Degree Thermostat for Increased Flow
from $26.99
(20)
High Performance 180 Degree Thermostat for Increased Flow
Performance Engine Coolant Thermostats
Lower Intake Manifold Gasket Set: 11 Piece Set
from $33.99
(4)
Lower Intake Manifold Gasket Set: 11 Piece Set
Performance Engine Intake Manifold Gaskets

What are the top-rated 1978 Ford Fairmont Performance and Racing Products?

Top-rated Performance and Racing Products for your 1978 Ford Fairmont based on customer reviews/ratings are:
Water Neck
from $19.99
(12)
Water Neck
“FINALLY… first time not having to re-do flimsy paper gaskets. Aside from thicker cork gasket, O ring is only way to go !”
High Perf. Full-Flow Lube Spin-on
from $16.99
(4)
High Perf. Full-Flow Lube Spin-on
“Filter size for my boat. OMC 460. works fine. HP filters have a bypass so that clogs do not cause the engine to starve for oil… important for HP eng”
Unilite Ignition Module
from $85.29
(3)
Unilite Ignition Module
“I like the Unilite product because it is so small and compact compared to the HEI stuff I normally use. If you are restricted on space Its a great pro”