1978 Dodge D450 Ignition and Tune-Up Products

Essential 1978 Dodge D450 Ignition and Tune-Up Products

Carquest Premium – Ignition Conversion Kit (Part No.CBA1706)

Ignition Conversion Kit

from

$432.99
Ignition Conversion Kit

Dorman – Help – Spark Plug Non-Foulers – 14mm Gasket Seat Long Reach (Part No.42004)

Spark Plug Non-Foulers - 14mm Gasket Seat Long Reach

from

$9.99
This spark plug non fouler is designed for easy installation on specified vehicles to protect spark plugs from fouling and damage. It is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles
  • Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
  • Durable construction – made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

MSD Ignition – Wire Set; Street Fire; V8 Multi-Angle; Socket/HEI Universal (Part No.5551)

Wire Set; Street Fire; V8 Multi-Angle; Socket/HEI Universal

from

$67.99
The street fire spark plug wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.

Product Features:
  • Helically wound conductor suppresses electro and radio noise
  • Kevlar core combination for great strength and durability
  • Heavy Duty Terminals For Secure Connection
  • 8mm silicone and synthetic jacket resists heat and abrasion
  • 500 Ohms/ft. Resistance For Improved Spark Delivery And Power
  • Silicone Boots Protect Against High Exhaust Temps
See More

Accel – 8Mm Super Stock Graphite Uni (Part No.4041K)

8Mm Super Stock Graphite Uni

from

$72.99
ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.

Product Features:
  • 7mm And 8mm High Gloss Silicone Jacket
  • 450 F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • RFI Suppression For Street Driven Applications
  • Custom-fit Universal And Import Coverage
  • High-strength Fiberglass Braid Construction
  • Pre And Post HEI Vehicles
See More

Carquest – Distributor Cap (Part No.24C1019)

Distributor Cap

from

$8.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • High-quality products that meet OE appearance and performance to
See More

Carquest Premium – Distributor Cap and Rotor Kit (Part No.CAC1799)

Distributor Cap and Rotor Kit

from

$11.99
Distributor Cap and Rotor Kit

Accel – Universal Fit 300+ Race Spark Plug Wire Set (Part No.7040)

Universal Fit 300+ Race Spark Plug Wire Set

from

$176.99
The oversized 8.8mm wire features a double silicone construction rated at over 600 F and 60kV. High gloss black silicone wire jacket not only looks great, but resists heat extremes, petrochemicals, ozone and moisture better than so-called blended materials for greater durability and longer life. High-density, high-temperature silicone insulation provides greater dielectric strength and eliminates arcing and the effects of corona better than typical OE style rubber materials. All-Kevlar stranded inner core and fiberglass braiding add greater pull strength and terminal retention. Stainless steel and brass terminals provide unsurpassed electrical conductivity and excellent corrosion resistance compared to terminals made of common or plated metals.

Product Features:
  • 150 Ohms/ft Of Resistance
  • 600 F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • Custom-fit Universal And Import Coverage
  • Pre And Post HEI Vehicles
  • Spiral-Wound Copper/Nickel Alloy
See More

MSD Ignition – Wire Set; Street Fire; Chrysler 383-440; Socket (Part No.5531)

Wire Set; Street Fire; Chrysler 383-440; Socket

from

$72.99
The street fire spark plug wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.

Product Features:
  • Helically wound conductor suppresses electro and radio noise
  • Kevlar core combination for great strength and durability
  • Heavy Duty Terminals For Secure Connection
  • 8mm silicone and synthetic jacket resists heat and abrasion
  • 500 Ohms/ft. Resistance For Improved Spark Delivery And Power
  • Silicone Boots Protect Against High Exhaust Temps
See More

E3 – DiamondFIRE Automotive Spark Plug: More Power, Saves Gas (Part No.E3.52)

DiamondFIRE Automotive Spark Plug: More Power, Saves Gas

from

$6.49
The Spark Plugs are the product of years of fundamental research in the combustion field. The unique patented electrode configuration of these new The spark plugs increases the amount of combustion pressure created during each power stroke of an engine, which results in a marked increase in power output, fuel economy, and reduced emissions in all gasoline engines. E3.52 is a 14mm, 0.375 reach plug with a gasket seat. It fits a wide variety of GM applications from the 50s to early 80s, and is generally the correct plug for older small block Chevrolet engines. The automotive plugs have three legs securing the Diamond FIRE electrode to the shell. This allows for excellent heat transfer, and helps to create more turbulence in the cylinder. The patented Diamond FIRE side wire is proven to increase power, reduce fuel consumption and improve hydrocarbon emissions in long-term use.

Product Features:
  • E3’s Diamond Fire edge to edge ground electrode provides maximum performance with increased efficiency and a faster more complete burn.
  • Smoother Acceleration & Idle – The faster flame initiated by the The spark plug results in a more complete burn of the ingested fuel charge. More pressure is created against the piston more fuel is put to work
  • Energy – Power output improved up to 6% on average in the typical operating ranges. Results will vary.
  • Efficiency – The “diamond shaped” side wire electrode projects the combustion spark in a way that more quickly ignites the air/fuel mixture, thereby creating a significantly faster and larger flame kernel. The result is that more fuel is put to work durin
  • E3’s patented Diamond Fire Technology provides a cleaner burning combustion, which translates into fuel savings and reduced engine carbon deposits
  • The Spark Plugs are pre-gapped at the factory and cannot be adjusted.
See More

ACDelco – Double Platinum Spark Plug (Part No.41-828)

Double Platinum Spark Plug

from

$8.29
ACDelco Gold (Professional) Double Platinum Spark Plug are a high quality alternative to Original Equipment (OE) parts. With a copper core and double platinum pads on the center electrode, these plugs are designed to deliver long-lasting performance. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.

Product Features:
  • One-piece, fired-in suppressor seal blends three glass types for a gas-tight seal that helps reduce radio frequency and engine interference, regulate spark plug energy, and protect against compression pressures for long life
  • Double platinum point pad on center and ground electrode offer excellent durability and consistent voltage demands to help reduce wear on ignition system
  • Pure copper core results in cooler electrode temperature for maximized durability and fouling resistance
  • Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
  • Premium aftermarket replacement part
  • Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
See More

Carquest Premium – Distributor Ignition Pickup (Part No.MEC2271)

Distributor Ignition Pickup

from

$29.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Distributor Rotor (Part No.DAA1421)

Distributor Rotor

from

$13.99
Distributor Rotor

Carquest – Distributor Rotor (Part No.23A1016)

Distributor Rotor

from

$4.29
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • High-quality products that meet OE appearance and performance to
See More

Accel – 8Mm Super Stock Spiral Uni Bk (Part No.5041K)

8Mm Super Stock Spiral Uni Bk

from

$103.99
The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.

Product Features:
  • 500 Ohms/ft Of Resistance
  • 550 F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • High RFI Suppression For Street And Strip Use
  • Universal And Import Coverage
  • High-strength Fiberglass Braid Construction
  • Pre And Post HEI Vehicles
  • 8mm High Gloss Silicone Jacket
See More

Accel – 8Mm Super Stock Graphite Uni (Part No.4041)

8Mm Super Stock Graphite Uni

from

$63.99
ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.

Product Features:
  • 7mm And 8mm High Gloss Silicone Jacket
  • 450 F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • RFI Suppression For Street Driven Applications
  • Custom-fit Universal And Import Coverage
  • High-strength Fiberglass Braid Construction
  • Pre And Post HEI Vehicles
See More

MSD Ignition – Distributor; Chrysler; 318; 340; 360; E-Curve (Part No.8504)

Distributor; Chrysler; 318; 340; 360; E-Curve

from

$762.99
The e-curve distributor will drop right in your Ford 289/302 and fire up its performance. The e-curve distributor features a digital control module that manages the timing curve replacing the centrifugal advance springs and weights. This module lets you select from nearly 100 different advance curves, including a vacuum advance by turning two rotary dials. You can also set an rpm limit that will protect your engine from overrev damage caused by a missed shift or driveline failure. These distributors are also fit with a high-output ignition module so there is no need to run an external ignition box. This combination makes these distributors ideal for restored muscle cars and street rods to keep a stock or clean appearance under the hood. The e-curve distributor is topped with MSD’s rynite molded cap and rotor and is supplied with a heavy-duty gear and a matching 3-pin weathertight wiring harness.

Product Features:
  • Digitally controlled; stand-alone distributor.
  • Adjustable Electronic Advance w/Vacuum Advance
  • Select up to 100 different curves through two rotary dials
  • High output ignition module for a powerful spark
  • Set a rev limit to protect your engine from overrev damage
See More

Carquest Premium – Distributor T3896: 100% New, With Cap and Rotor (Part No.T3896)

Distributor T3896: 100% New, With Cap and Rotor

from

$113.99
Carquest Premium distributors are built to meet or exceed the original equipment (OE) specifications for each application. Our distributors are built by a manufacturer that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each distributor is supplied with the cap, rotor and any seals needed for installation. Carquest Premium distributors are 100% new and undergo extensive validation testing to ensure long-lasting ignition performance and reliability.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new unit with no core charges
  • Precision machined shafts result in high speed accuracy and help prevent bearing failures
  • Every distributor is tested to ensure reliable and long-lasting performance
  • O-rings or gaskets included where applicable
  • Precision Engineered ignition modules and plugs ensure proper performance plus precise connection.
  • Precision machined and ground shafts assure high speed accuracy and prevent bearing failures.
  • Original Equipment Equivalent high voltage ignition coils.
  • 100% New Components and fasteners eliminate premature failures.
See More

Carquest – Ignition Coil (Part No.26C1078)

Ignition Coil

from

$34.49
Carquest Ignition Coils ensure fast starts, consistent engine performance and optimized fuel efficiency at an affordable cost.

Product Features:
  • High output
  • Long spark duration
  • High dielectric strength
  • Corrosion resistant connections
  • High reliability
  • Long service life
See More

Mallory – Universal Street Performance Ignition Coil (Part No.29219)

Universal Street Performance Ignition Coil

from

$76.99
Universal, 12-volt coil features an oil-filled design and arc resistant alkyd top for superior performance, insulation and cooling. The internal design of this coil eliminates the need for a separate ballast resistor. This coil is specifically designed to deliver optimum performance when used with: Mallory UNILITE or magnetic breaker less ignitions Mallory HYFIRE IV electronic ignition controls, and Mallory electronic ignition conversion kits.

Product Features:
  • 12 Volt Coil
  • Oil-Filled Design
  • Arch Resistant Alkyd Top
  • Designed To Deliver Optimum Performance
See More

Felpro – Distributor Mounting Gasket (Part No.6464)

Distributor Mounting Gasket

from

$3.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

DENSO – Spark Plug Wire Set: Carbon Core, 10 Wire Set (Part No.671-8111)

Spark Plug Wire Set: Carbon Core, 10 Wire Set

from

$59.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:
  • Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
  • Identical OE end caps are designed to “click” into place for easy installation and a secure fit
  • Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
See More

DENSO – Spark Plug Wire Set: Carbon Core, 10 Wire Set (Part No.671-8119)

Spark Plug Wire Set: Carbon Core, 10 Wire Set

from

$72.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:
  • Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
  • Identical OE end caps are designed to “click” into place for easy installation and a secure fit
  • Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
See More

Carquest Premium – Ignition Control Module (Part No.ABC1688)

Ignition Control Module

from

$30.99
Carquest premium engine management products provide the right ignition control module for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions. Designed to meet OE quality and performance standards using top-quality components, our sensors are the best choice for your maintenance and repair needs.

Product Features:
  • Thicker, more robust wire bonds for lasting reliability
  • Proprietary, application-specific integrated chips for proper performance
  • Fast-start circuitry for quick starts
  • Ultrasonically welded copper heat sinks to ensure heat transfer for long life
  • Laser trimming to precise specifications for OE function
See More

Carquest Premium – Ignition Module (Part No.CBE1016)

Ignition Module

from

$58.99
CARQUEST Ignition Modules are built by an ignition systems manufacturer with expertise in the entire vehicle spark system.

Product Features:
  • CARQUEST Ignition Modules creates and refines the timing of the engine using various sensors and readings throughout the spark system in order to create an efficiently running engine.
  • CARQUEST Ignition Modules use current and voltage limiting circuitry in order to prevent the ignition coil from over voltage/current. Over voltages can allow for coils to create excessive heat which can damage to the ignition module resulting in check eng
  • CARQUEST Ignition Modules are 100% individually tested for all product functionalities including over voltage, timing and dwell.
See More

Carquest Premium – Ignition Module (Part No.CBE1027)

Ignition Module

from

$58.99
CARQUEST Ignition Modules are built by an ignition systems manufacturer with expertise in the entire vehicle spark system.

Product Features:
  • CARQUEST Ignition Modules creates and refines the timing of the engine using various sensors and readings throughout the spark system in order to create an efficiently running engine.
  • CARQUEST Ignition Modules use current and voltage limiting circuitry in order to prevent the ignition coil from over voltage/current. Over voltages can allow for coils to create excessive heat which can damage to the ignition module resulting in check eng
  • CARQUEST Ignition Modules are 100% individually tested for all product functionalities including over voltage, timing and dwell.
See More

1978 Dodge D450 Ignition and Tune-Up Products

You count on your 1978 Dodge D450 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 75 Ignition and Tune-Up Products ranging in price from $2.79 to $762.99, you’re sure to find everything you need for your 1978 Dodge D450.

Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 15 different brands like NGK, Autolite, and ACDelco. 1978 Dodge D450 Ignition and Tune-Up Products start as low as $2.79!

One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 432 extensive product reviews on 1978 Dodge D450 Ignition and Tune-Up Products. Some of the top-rated Ignition and Tune-Up Products products we carry are 8Mm Super Stock Graphite Uni with 3.0 stars and Blaster 2 Coil: High Performance Ignition Upgrade with 4.3 stars.

Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 1978 Dodge D450 below to get started!

Top-Rated Ignition and Tune-Up Products Brands For Your 1978 Dodge D450

Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1978 Dodge D450 running right for years to come. In our inventory you’ll find brands like NGK, Autolite, ACDelco, and even more.

Popular Carquest Ignition and Tune-Up Products

You’ll find popular Carquest brand products across Ignition Coils and Boots. All are waiting to get your 1978 Dodge D450 back on the road. Some of the top-rated Carquest products in these categories are:
Ignition Coil
from $39.05
(3)
Ignition Coil
Ignition Coils

Top-Rated Autolite Ignition and Tune-Up Products


If Autolite are what you’re looking for, our inventory holds plenty. We stock Autolite brand Ignition and Tune-Up Products for your 1978 Dodge D450, and some of our most reviewed Autolite parts include:

FAQs for 1978 Dodge D450 Ignition and Tune-Up Products

What are the most purchased Ignition and Tune-Up Products for the 1978 Dodge D450?

Out of 75 Ignition and Tune-Up Products for the 1978 Dodge D450, the most popular in our inventory are:
Copper Core Spark Plug
from $4.99
(13)
Copper Core Spark Plug
Spark Plugs

What are the top-rated 1978 Dodge D450 Ignition and Tune-Up Products?

Top-rated Ignition and Tune-Up Products for your 1978 Dodge D450 based on customer reviews/ratings are:
8Mm Super Stock Graphite Uni
from $63.29
(25)
8Mm Super Stock Graphite Uni
“Well built”
Blaster 2 Coil: High Performance Ignition Upgrade
from $49.99
(20)
Blaster 2 Coil: High Performance Ignition Upgrade
“Had one before and blew it up, good easy replacement. MSD makes a good product.”
Ignition Coil
from $35.05
(17)
Ignition Coil
“I used this on my 1950 ford tractor.”