1978 Chevrolet Luv Transmission Parts
More 1978 Chevrolet Luv Transmission Parts Categories
If you’re looking for an original Transmission Parts replacement for a 1978 Chevrolet Luv, you can search through our selection below. You’ll also find aftermarket and OEM Transmission Parts to meet your needs.
Essential 1978 Chevrolet Luv Transmission Parts
ATP – AT DPSTK TUBE SEAL (Part No.SO-35)
from
$5.99
AT DPSTK TUBE SEAL
ARP Auto Racing – For Use With General Motors, 0.590"L Under Head, 10Mm X 1.5 Thread, With Washers (Part No.230-7305)
from
$27.99
You can forget about the problem of shearing a torque converter bolt after you install these super strong 200,000 PSI gems. They are designed for each specific application and provide the optimum grip. Kits come with hardened parallel ground washers.
Product Features:
See More
Product Features:
- Super Strong, Rated At 200,000 PSI
- Kits Come With Hardened Parallel Ground Washers
- Made In USA
- 0.590″ Underhead Length
- M10 X 1.5 Thread Size
- Set of 6
National – Bearings (Part No.30208)
from
$29.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Matched cup and cone components ensures consistent quality and outstanding performance
- Industry leading coverage
- Professional technicians know they can depend on National
B & M – Transmission Accessories, Converter Lockup Controller (Part No.70244)
from
$309.99
The B&M converter lockup controller provides dash-mounted control to govern converter lockup at any speed between 30 and 90 mph. These kits eliminate converter lock and unlock cycling and premature unwanted converter lockup.
Product Features:
See More
Product Features:
- Dash Mounted Control For Speeds Between 30-90 mph
- LED Indicates Locked OR Unlocked
Driveworks – Taper Bearing Set (Part No.S-30208)
from
$17.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
ATP – AT CONTR SOLENOID (Part No.CE-4)
from
$54.99
AT CONTR SOLENOID
ATP – AT FRT PUMP BUSHING (Part No.CB-4)
from
$10.99
AT FRT PUMP BUSHING
National – Multi Purpose Seal (Part No.474133)
from
$11.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Driveworks – Oil Seal (Part No.S-9613S)
from
$4.79
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
ATP – AT DETENT CABLE SEAL (Part No.SO-37)
from
$3.49
AT DETENT CABLE SEAL
ATP – AT SEL SHAFT SEAL (Part No.SO-19)
from
$7.99
AT SEL SHAFT SEAL
B & M – Automatic Shifter, Z-Gate (Part No.80681)
from
$279.99
Reverse lockout meets NHRA and IHRA requirements. Includes neutral safety switch, backup light switch, black T-Handle. Fits most 3 Speed applications.
Product Features:
See More
Product Features:
- Base Trims To Custom Fit Floor
- NHRA/IHRA Reverse Lockout Meets Requirements
- Includes Neutral Safety Switch
- Includes Backup Light Switch
- Includes Black T-Handle and Cable
National – Multi Purpose Seal (Part No.6712NA)
from
$10.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Driveworks – Oil Seal (Part No.S-6712NA)
from
$6.29
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Driveworks – Oil Seal (Part No.S-4950)
from
$4.29
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
B & M – Cable Bracket (Part No.30498)
from
$28.99
Cable Bracket, GM (Bandit style shifters only) APPLICATION: For TH-400, 350, 250, 200, 700R4, 200-4R with 80797, 80798 or 81050 shifter.
Product Features:
See More
Product Features:
- Shifter Service Parts
- Steel
- Natural Finish
- Sold individually
- Replacement for Bandit shifters
ATP – AT SEAL (Part No.TO-34)
from
$3.99
AT SEAL
B & M – Kickdown Switch Kit For TH400 Transmission (Part No.20297)
from
$84.99
When swapping the TH400 transmission into any vehicle, this kit makes installation of the transmission’s kickdown feature a snap. This switch mounts to either a TH700R4, TH200, TH200-R4 or TH350 throttle cable bracket.
Product Features:
See More
Product Features:
- Allows High Speed Cruise
- Cruise In Overdrive
- Prevents Part Throttle Kickdown
- Quick Installation
Driveworks – Auto Transmission Shift Shaft Seal (Part No.S-8792S)
National – Multi Purpose Seal (Part No.8792S)
from
$6.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)
from
$26.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.
Product Features:
See More
Product Features:
- High torque and rigidity
- Sensor-safe, non-corrosive formula
- OEM specified
- Low-odor, non-corrosive formula
- Ideal for closed spaced bolt patterns
Permatex – The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ (Part No.34328)
from
$17.49
Permatex’s The Right Stuff 90 Minute Series offers the fastest return to service in a in just 90 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 90 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.
Product Features:
See More
Product Features:
- Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
- Sensor-safe, non-corrosive, RTV silicone
- Protects against leaks caused by vibration and thermal expansion
- Meets performance specs of OE silicone gaskets
- Quickly returns vehicle to service in just 90 minutes
National – Multi Purpose Seal (Part No.9613S)
from
$7.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
ATP – AT SOLENOID SEAL (Part No.JO-15)
from
$3.99
AT SOLENOID SEAL
Anchor – Transmission Mount: Rear, 1 Piece (Part No.2567)
from
$11.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to CHEV 75-82;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1975-1982
- Weight approx: 3 Lbs
Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242009)
from
$39.99
Product Features:
See More
- Imperial Econo-Kool« tube and fin transmission cooler
- Size: 3/4″ x 5″ x 12-1/2″
- Sub-compact to compact cars
- GVWR up to 12,000 lbs.
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Imperial – Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty (Part No.243008)
from
$80.99
Product Features:
See More
- Imperial Rapid-Cool« plate and fin transmission cooler
- Size: 3/4″ x 11″ x 9-1/2″
- Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
- GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
- 33% more efficient than a comparable tube and fin design
Imperial – High Performance Transmission Oil Cooler (Part No.240512)
from
$67.99
Product Features:
See More
- Imperial high-performance transmission cooler
- Size: 3/4″ x 7-1/2″ x 12-1/2″
- SAE 45-degree fittings for maximum reliability
- Electrostatic powder-coated to prevent corrosion
- SAE 45 degree fittings for maximum reliability
- Electrostatically powder coated to prevent corrosion
- All aluminum lightweight construction
Popular 1978 Chevrolet Luv Transmission Parts Categories
1978 Chevrolet Luv Transmission Parts
You count on your 1978 Chevrolet Luv to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Transmission Parts. With 49 Transmission Parts ranging in price from $2.49 to $529.99, you’re sure to find everything you need for your 1978 Chevrolet Luv.
Brands matter. If you want to shop a specific Transmission Parts brand, we stock 10 different brands like Imperial, National, and Permatex. 1978 Chevrolet Luv Transmission Parts start as low as $2.49!
One of the best ways to find top quality OEM or aftermarket Transmission Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 210 extensive product reviews on 1978 Chevrolet Luv Transmission Parts. Some of the top-rated Transmission Parts products we carry are Multi Purpose Seal with 4.4 stars and Automatic Shifter, Z-Gate with 4.4 stars.
Did we mention you can order your Transmission Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Transmission Parts inventory for your 1978 Chevrolet Luv below to get started!
Top-Rated Transmission Parts Brands For Your 1978 Chevrolet Luv
Trusted Transmission Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1978 Chevrolet Luv running right for years to come. In our inventory you’ll find brands like Imperial, National, Permatex, and even more.
Popular Permatex Transmission Parts
You’ll find popular Permatex brand products across Automatic Transmission Pan and Gaskets. All are waiting to get your 1978 Chevrolet Luv back on the road. Some of the top-rated Permatex products in these categories are:
from
$26.99
(7)
High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ
Transmission Pan Gaskets
Top-Rated Imperial Transmission Parts
If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Transmission Parts for your 1978 Chevrolet Luv, and some of our most reviewed Imperial parts include:
FAQs for 1978 Chevrolet Luv Transmission Parts
What are the most purchased Transmission Parts for the 1978 Chevrolet Luv?
Out of 49 Transmission Parts for the 1978 Chevrolet Luv, the most popular in our inventory are:
What are the top-rated 1978 Chevrolet Luv Transmission Parts?
Top-rated Transmission Parts for your 1978 Chevrolet Luv based on customer reviews/ratings are:
from
$80.99
(8)
Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty
“Used this cooler to replace the missing factory one on my Polaris 330 ATV. Made an adapter plate to fit to the fan housing. Works great, beats the $30”
