1978 Buick Skylark Clutch Systems
More 1978 Buick Skylark Clutch Systems Categories
If you’re looking for an original Clutch Systems replacement for a 1978 Buick Skylark, you can search through our selection below. You’ll also find aftermarket and OEM Clutch Systems to meet your needs.
Essential 1978 Buick Skylark Clutch Systems
KAI – Clutch Push Rod Seal (Part No.GMK4021951705)
from
$29.99
New Goodmark Clutch Upper Pushrod Seal
Product Features:
See More
Product Features:
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
ATP – Flywheel Ring Gear (Part No.ZA-500)
from
$29.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- Eliminates grinding from damaged teeth
- Increases starter drive life
ATP – FLYWHEEL SHIM (Part No.GS-10)
from
$26.99
FLYWHEEL SHIM
ATP – FLYWHEEL SHIM (Part No.GS-9)
from
$23.99
FLYWHEEL SHIM
Lakewood – Bellhsng (Part No.77-150)
from
$666.99
Bellhsng
Lakewood – Lightweight Flexplate (Part No.RM-901)
from
$194.99
Lightweight Flexplate
Hays – Performance; Flexplate (Part No.10-010)
from
$122.99
Constructed of thicker than stock steel plate to withstand the stress of high stall speed converters and high RPM engine. Zinc dichromate plated to resist rust and corrosion. Meets SFI specification 29.1 for racing.
Product Features:
See More
Product Features:
- Thicker Than Stock Steel Plate
- Ring Gear Securely Welded
- Dual Bolt Patterns
- Zinc-Dichromate Plated To Resist Corrosion
- Withstands High Torque and RPM
Richmond Gear – Differential Cross Shaft (Part No.80-0270-1)
from
$64.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!
Product Features:
See More
Product Features:
- For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
- The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
- Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
- Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
- Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
Richmond Gear – Differential Cross Shaft (Part No.CSPGM12)
from
$27.49
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!
Product Features:
See More
Product Features:
- For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
- The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
- Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
- Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
- Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
Richmond Gear – Differential Cross Shaft (Part No.80-0272-1)
from
$66.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!
Product Features:
See More
Product Features:
- For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
- The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
- Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
- Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
- Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
Dorman – Help – Flywheel Bolts (Part No.14557)
from
$9.99
This clutch flywheel bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch flywheel bolt matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Flywheel Bolts Thread 7/16-20, Length .900 In. (22.86mm), Head Thickness .190 In (Part No.74070)
from
$12.99
This clutch flywheel bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch flywheel bolt matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Flywheel Bolts – Thread Size 7/16-20; Thread Length 0.900 In. (sold by each) (Part No.678-154)
from
$3.99
This clutch flywheel bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch flywheel bolt matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
LuK – Clutch Kit (Part No.04-005)
from
$131.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
See More
LuK – Clutch Kit: 10 3/8" Disc Diameter, 1 1/8" Input Shaft Diameter, 10 Tooth Spline (Part No.04-002)
from
$167.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Application matched for OE form, fit, and function
- Manufactured with high-quality materials, using cutting edge technology and processes
- Stock photo – Actual parts and materials may vary.
LuK – LuK Original Equipment Quality Replacement CLUTCH KIT (Part No.04-020)
from
$139.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Application matched for OE form, fit, and function
- Manufactured with high-quality materials, using cutting edge technology and processes
- Stock photo – Actual parts and materials may vary.
ATP – AT CLUTCH PLATE (Part No.JC-57)
from
$12.99
AT CLUTCH PLATE
ATP – AT CLUTCH PLATE (Part No.SC-29)
from
$13.99
AT CLUTCH PLATE
ATP – AT CLUTCH PLATE (Part No.SC-30)
from
$6.99
AT CLUTCH PLATE
Dorman – Help – Ball Stud Thread Size 13/16-16, Length 1.50 In. (Part No.14556)
from
$20.99
This clutch pivot ball is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch pivot ball is designed to match the fit and function of the original part on specified vehicles
- Ideal solution – this pivot ball is a reliable replacement for an original part that has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
KAI – Clutch Pivot Ball (Part No.GMK4046951694)
from
$29.99
New Goodmark Clutch Pivot Stud, Mounted On Vehicle Frame
Product Features:
See More
Product Features:
- Mounted On Vehicle Frame
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Dorman – Help – Clutch Pilot Bushing (Part No.14647)
from
$3.99
This clutch pilot bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch pilot bushing matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Clutch Pilot Bushing (Part No.690-014.1)
from
$7.99
This clutch pilot bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch pilot bushing matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
National – Bearings (Part No.PB-656-HD)
from
$14.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel and bronze for outstanding durability and performance
- Oil impregnated for extended life
- Industry leading coverage
- Professional technicians know they can depend on National
ATP – CLUTCH FORK (Part No.ZA-100)
from
$23.99
CLUTCH FORK
ATP – CLUTCH FORK (Part No.ZA-105)
from
$94.99
CLUTCH FORK
Dorman – Help – Clutch Fork, Clutch-In (Part No.14550)
from
$70.99
This clutch fork is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch fork is designed to match the fit and function of the original part on specified vehicles
- Ideal solution – this fork is a reliable replacement for an original part that has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Popular 1978 Buick Skylark Clutch Systems Categories
1978 Buick Skylark Clutch Systems
You count on your 1978 Buick Skylark to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Clutch Systems. With 43 Clutch Systems ranging in price from $3.99 to $768.99, you’re sure to find everything you need for your 1978 Buick Skylark.
Brands matter. If you want to shop a specific Clutch Systems brand, we stock 9 different brands like ATP, Dorman, and Carquest Premium. 1978 Buick Skylark Clutch Systems start as low as $3.99!
One of the best ways to find top quality OEM or aftermarket Clutch Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 150 extensive product reviews on 1978 Buick Skylark Clutch Systems. Some of the top-rated Clutch Systems products we carry are Clutch Fork, Clutch-In with 3.0 stars and Performance; Flexplate with 1.0 stars.
Did we mention you can order your Clutch Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Clutch Systems inventory for your 1978 Buick Skylark below to get started!
Top-Rated Clutch Systems Brands For Your 1978 Buick Skylark
Trusted Clutch Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1978 Buick Skylark running right for years to come. In our inventory you’ll find brands like ATP, Dorman, Carquest Premium, and even more.
Popular Carquest Premium Clutch Systems
You’ll find popular Carquest Premium brand products across Clutch Kits. All are waiting to get your 1978 Buick Skylark back on the road. Some of the top-rated Carquest Premium products in these categories are:
Top-Rated ATP Clutch Systems
If ATP are what you’re looking for, our inventory holds plenty. We stock ATP brand Clutch Systems for your 1978 Buick Skylark, and some of our most reviewed ATP parts include:
FAQs for 1978 Buick Skylark Clutch Systems
What are the most purchased Clutch Systems for the 1978 Buick Skylark?
Out of 43 Clutch Systems for the 1978 Buick Skylark, the most popular in our inventory are:
from
$12.99
(2)
Flywheel Bolts Thread 7/16-20, Length .900 In. (22.86mm), Head Thickness .190 In
Flywheel Bolts
What are the top-rated 1978 Buick Skylark Clutch Systems?
Top-rated Clutch Systems for your 1978 Buick Skylark based on customer reviews/ratings are:
from
$70.99
(2)
Clutch Fork, Clutch-In
“To my utter amazement, this piece is MADE IN USA!
Use Code RAF5A1102 to get 40% Off!”
from
$122.99
(1)
Performance; Flexplate
“purchased this for my 1971 427 stroker Corvette,and one of the teeth chipped off the. engine was turned correctly so this should not have happened.”
