1978 Avanti II Ignition and Tune-Up Products
More 1978 Avanti II Ignition and Tune-Up Products Categories
If you’re looking for an original Ignition and Tune-Up Products replacement for a 1978 Avanti II, you can search through our selection below. You’ll also find aftermarket and OEM Ignition and Tune-Up Products to meet your needs.
Essential 1978 Avanti II Ignition and Tune-Up Products
Accel – GM Sb Hei 86-75 Over Vlv Cvr (Part No.9011C)
from
$181.99
ACCEL now offers the cure for burnt spark plug boots with Extreme 9000 Ceramic wire kits. The 8mm Ferro-Spiral core wire now has ceramic boots on the spark plug end of the wires. Ceramic boots withstand up to 2,000 degrees. Great for running headers with close tolerances, an engine bay with little room, or an RV with boots that melt because of heat. Ultra high temperature double silicone construction wire rated at 600 degrees fahrenheit peak. 500 ohms/ft Ferro-Spiral core developed for performance use. Excellent energy delivery to the spark plugs, while providing the highest level of RFI/EMI suppression. Stainless steel spark plug terminals for maximum spark energy to the plugs. Pre-made to factory lengths for a perfect fit.
Product Features:
See More
Product Features:
- Ceramic boots withstand up to 2,000░ Fahrenheit
- Ceramic boots withstand up to 2,000° Fahrenheit
- 8mm double silicone construction black wire rated at 600░ F rated
- 8mm double silicone construction black wire rated at 600° F rated
- 500 Ohms/foot ferro sprial core offers the highest level of RFI/EMI suppression
- Universal and custom fit applications
- Universal And Custom Fit Applications
PerTronix – 808415 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 115 Degree Red (Part No.808415)
from
$81.99
8mm Custom fit MAGx2 wires are available for many popular applications equipped with Flame-Thrower or original GM HEI distributors. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cuttting, crimping and
Product Features:
See More
Product Features:
- PerTronix 808415 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 115 Degree Red
- Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
Mallory – Mallory Prosidewinder 135F Univ/Wire Set (Part No.947)
from
$153.99
Features at a glance, low 300 Ohm resistance spiral core delivers high energy output for maximum spark at the plug. Great RFI suppression meets the demands of today’s on-board electronics, such as electronic ignition, sound systems, and computer controls. 8MM ozone-resistant red silicone jacket repels water, oil, grease, and fuel, and withstands temperatures up to 500 degrees. Fits V8, universal wire kit: includes 45 degree spark plug boots, female socket (standard) distributor boots and terminals.
Product Features:
See More
Product Features:
- Most Advanced Wire By Mallory
- RFI Suppression
- High Temperature Silicone Jacket
- Withstands Over 500+F
- Come In Ready To Use Kits
- Extra Long Kits
PerTronix – 808480 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 180 Degree Red (Part No.808480)
from
$82.99
8mm Custom fit MAGx2 wires are available for many popular applications equipped with Flame-Thrower or original GM HEI distributors. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cuttting, crimping and
Product Features:
See More
Product Features:
- PerTronix 808480 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 180 Degree Red
- Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
Accel – GM Sb Hei 86-75 Under Vlv Cvr-Black (Part No.9018CK)
from
$175.99
Do you want to put headers on your vehicle, but are afraid you may cook the spark plug wires? Just looking for a nice upgrade for your stock spark plug wires? If you answered yes to any of these questions, ACCEL has the wire set for you. ACCEL Extreme 9000 Ceramic Boot Wires feature ultra high-temperature, double silicone, 8mm, 500 ohms/ft Ferro-Spiral core wire developed for performance use. The wire is rated at 600 degrees Fahrenheit peak and the black Ceramic boots withstand up to 2,000 degrees. Great for running headers with close tolerances, an engine bay with little room or an application with high under-hood temps. ACCEL Extreme 9000 wires offer excellent energy delivery to the spark plugs through stainless steel spark plug terminals, while providing the highest level of RFI/EMI suppression.
Product Features:
See More
Product Features:
- Black Ceramic boots withstand up to 2,000░ Fahrenheit
- Black Ceramic boots withstand up to 2,000° Fahrenheit
- 8mm double silicone construction black wire rated at 600░ F rated
- 8mm double silicone construction black wire rated at 600° F rated
- 500 Ohms/foot ferro sprial core offers the highest level of RFI/EMI suppression
- Universal and custom fit applications
- Stainless Steel Plug Terminals
Accel – GM Sb Hei 86-75 Under Vlv Cvr (Part No.9018C)
from
$181.99
ACCEL now offers the cure for burnt spark plug boots with Extreme 9000 ceramic wire kits. The 8mm Ferro-Spiral core wire now has ceramic boots on the spark plug end of the wires. Ceramic boots withstand up to 2,000 degrees. Great for running headers with close tolerance, an engine bay with little room, or an RV with boots that melt because of heat. Ultra high temperature double silicone construction wire rated at 600 degrees Fahrenheit peak. 500 ohms/ft Ferro-Spiral core developed for performance use. Excellent energy delivery to the spark plugs, while providing the highest level of RFI/EMI suppression. Stainless steel spark plug terminals for maximum spark energy to the plugs. Pre-made to factory lengths for a perfect fit.
Product Features:
See More
Product Features:
- Ceramic boots withstand up to 2,000░ Fahrenheit
- Ceramic boots withstand up to 2,000° Fahrenheit
- 8mm double silicone construction black wire rated at 600░ F rated
- 8mm double silicone construction black wire rated at 600° F rated
- 500 Ohms/foot ferro sprial core offers the highest level of RFI/EMI suppression
- Universal and custom fit applications
- Universal And Custom Fit Applications
Accel – GM Sb Hei 86-75 Over Vlv Cvr (Part No.9011CK)
from
$193.99
Do you want to put headers on your vehicle, but are afraid you may cook the spark plug wires? Just looking for a nice upgrade for your stock spark plug wires? If you answered yes to any of these questions, ACCEL has the wire set for you. ACCEL Extreme 9000 Ceramic Boot Wires feature ultra high-temperature, double silicone, 8mm, 500 ohms/ft Ferro-Spiral core wire developed for performance use. The wire is rated at 600 degrees Fahrenheit peak and the black Ceramic boots withstand up to 2,000 degrees. Great for running headers with close tolerances, an engine bay with little room or an application with high under-hood temps. ACCEL Extreme 9000 wires offer excellent energy delivery to the spark plugs through stainless steel spark plug terminals, while providing the highest level of RFI/EMI suppression.
Product Features:
See More
Product Features:
- Black Ceramic boots withstand up to 2,000░ Fahrenheit
- Black Ceramic boots withstand up to 2,000° Fahrenheit
- 8mm double silicone construction black wire rated at 600░ F rated
- 8mm double silicone construction black wire rated at 600° F rated
- 500 Ohms/foot ferro sprial core offers the highest level of RFI/EMI suppression
- Universal and custom fit applications
- Stainless Steel Plug Terminals
MSD Ignition – Wire Set; Super Conductor; Small Block Chevy to use w/PN 8541 Crab Cap (Part No.30479)
from
$193.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.
Product Features:
See More
Product Features:
- Less than 50 ohms per foot for superior spark
- Ferro-magnetic impregnated core creates an effective EMI choke
- 40 ft. Of Conductor Wound Into A Single Foot Of Wire
- For high EMI suppression
- Conductor core features Dupont Kevlar material
- Proprietary compound sleeves for resistance to high heat/abrasion
MSD Ignition – Distributor Cap; Crab Cap; HEI Terminal; fits PN8486/PN 8489 (Part No.8541)
from
$96.99
MSD molds our most popular V8 distributor caps in-house. These caps are injection molded from DuPont(R) rynite material and feature spark plug-style terminals. These terminals offer improved locking connections and the rynite material is extremely strong.
Product Features:
See More
Product Features:
- Rynite molded cap
- HEI style spark terminals
- Designed w/Performance In Mind
- High quality; voltage insulating material
- Used For MSD PN[8567/84673]
- Fits In Extremely Tight Areas
- Red
Motorcraft – Platinum Spark Plug: Enhances Durability & Reduces Misfires (Part No.SP-502)
from
$6.99
Engineered to meet strict Ford engineering standards, these spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption, and optimize emissions. With a platinum center electrode tip and nickel ground electrode tip, they are resistant to oxidation and arc erosion. The multi-rib insulator protects against misfire, ensuring reliable performance for up to 100,000 miles. Backed by Motorcraft’s Service Parts Warranty, these spark plugs are an exact fit for Ford, Lincoln, and Mercury vehicles, and help prevent false check engine lights. Designed with high-quality materials, Motorcraft spark plugs deliver original equipment performance and reliability for a broad range of applications, including domestic and import cars and trucks of all makes and sizes.
Product Features:
See More
Product Features:
- Motorcraft spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption and optimize emissions.
- Backed by Motorcraft’s Service Parts Warranty
- Exact fit for Ford, Lincoln and Mercury vehicles
- Resistant to oxidation and arc erosion.
- Multi-rib insulator protects against misfire.
- Service intervals of up to 100,000 miles.
- Motorcraft Spark Plugs are designed with high quality materials to provide reliable performance for almost any application.
- Motorcraft Spark Plugs are what was in the vehicle when it was manufactured
- Motorcraft ignition components help prevent false check engine lights.
- High-Quality Electrode Materials: Featuring a platinum center electrode tip and a nickel ground electrode tip, the SP-502 spark plugs are resistant to oxidation and arc erosion, enhancing their longevity and reliability.
Champion – Iridium Spark Plug: Maximum Performance, OE Replacement, RS14WYPB5 (Part No.9404)
from
$8.49
Champion® Iridium – the ultimate element. This spark plug’s fine-wire iridium center and platinum ground electrodes provide the sharpest spark focus for maximum performance.
Product Features:
See More
Product Features:
- Champion Iridium – Maximum Performance. Premium Spark Plug
- Iridium center electrode delivers maximum life
- Fine-wire center electrode and V-trimmed for greater ignitability
- V-trimmed ground electrode promotes sharper spark focus
- Maintains stable operating temperature under all engine loads
- Heat-Active┐ alloy allows electrodes to reach optimal temperature quickly
Motorcraft – Enhance Engine Performance with Reliable Spark Plug (Part No.SP-502-X)
from
$7.29
Motorcraft Spark Plugs are original equipment on Ford Motor Company vehicles engineered to meet strict Ford engineering standards to provide original equipment performance and reliability. Delivering performance, reliability and confidence, Motorcraft spark plugs are available for a broad range of applications, including domestic and import cars and trucks of all makes and sizes.
Product Features:
See More
Product Features:
- Motorcraft spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption and optimize emissions.
- Backed by Motorcraft’s Service Parts Warranty
- Exact fit for Ford, Lincoln and Mercury vehicles
- Resistant to oxidation and arc erosion.
- Multi-rib insulator protects against misfire.
- Service intervals of up to 100,000 miles.
- Motorcraft Spark Plugs are designed with high quality materials to provide reliable performance for almost any application.
- Motorcraft Spark Plugs are what was in the vehicle when it was manufactured
- Motorcraft ignition components help prevent false check engine lights.
Champion – Copper Plus Spark Plug: Dependable Performance, OE Replacement, RV15YC4 (Part No.18)
from
$3.49
Dependable Performance, OE Replacement, RV15YC4. This Champion spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear. The Copper Plus design ensures dependable performance and durability, while the copper core center electrode allows for accurate control of heat range, extending the plug’s life. Built to ISO and SAE standards, it offers superior corrosion resistance and proven performance. The nickel center electrode tip and tapered seat type further enhance its reliability, making it an excellent choice for maintaining your engine’s efficiency.
Product Features:
See More
Product Features:
- Copper Plus – Dependable Performance and Durability
- Copper core center electrode allows for accurate control of heat range for longer life
- Superior corrosion resistance
- Built to ISO and SAE standards for proven performance
- Built to ISO and SAE standards for proven performance
- Enhanced Conductivity and Heat Control: The Champion Copper Plus Spark Plug features a copper core electrode that provides increased conductivity and heat control, ensuring good overall wear and extending the plug’s life.
- Reliable Nickel Center Electrode Tip: Featuring a nickel center electrode tip and a tapered seat type, this spark plug ensures enhanced reliability and optimal engine performance.
ACDelco – RAPIDFIRE Premium Platinum Tip Copper Core Spark Plug: Reduces Misfires & Enhances Durability (Part No.7)
from
$5.99
ACDelco Gold (Professional) RAPIDFIRE Spark Plugs are a high quality alternative to Original Equipment (OE) parts. These RAPIDFIRE Single Platinum Performance Spark Plugs are designed for everyday use and are a high quality replacement for many vehicles on the road today. These premium aftermarket spark plugs have high-quality suppressors that help prevent misfiring, an improved plug to boot seal, and a pure copper core for greater durability. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.
Product Features:
See More
Product Features:
- Solid state suppressor, with two-piece glass and brass seal, can help reduce radio frequency interference, regulates spark energy for long electrode life, and helps protect against high combustion pressures
- Pure copper core provides great heat transfer and helps maximize plug durability
- Platinum on center electrode enables superior spark characteristics and can reduce voltage requirements of the ignition system
- Ribless insulator helps optimize plug to boot sea
- Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
- Premium aftermarket replacement part
- Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
- High-Quality Suppressors: ACDelco Gold RAPIDFIRE Spark Plugs feature high-quality suppressors that help prevent misfiring, ensuring reliable performance for everyday use.
- Improved Plug to Boot Seal: Designed with an improved plug to boot seal, these spark plugs provide a secure fit, enhancing overall engine performance and longevity.
Champion – Double Platinum & Power Spark Plug Exceptional Perf OE Replacement RV17PMP4 (Part No.7018)
from
$3.99
Champion® Double Platinum Power¿ spark plugs deliver more powerful performance. Featuring exclusive Heat-Active¿ alloy, platinum fine wire center electrode and platinum pad ground electrode provide maximum life and sharper spark focus.
Product Features:
See More
Product Features:
- Double Platinum Power – Premium Spark Plug. More Powerful Performance.
- Platinum center and ground electrode for greater wear resistance
- Maintains stable operating temperature under all engine loads
- Fine-wire center electrode for greater ignitability
- V-trimmed ground electrode promotes sharper spark focus
- Heat-Active┐ alloy allows electrodes to reach optimal temperature
Felpro – DISTRIBUTOR MOUNTING GASKET (Part No.70194)
from
$2.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Validated for fit, form and function
- Unsurpassed quality you can trust
E3 – High Output DiamondFIRE HEI Racing Coil (Part No.E3.623)
from
$65.99
The E3 HEI Coil in Cap features a superior design that works with aftermarket performance 4-pin modules and high performance electronic controls. The coil’s resistance and inductance values have been optimized to match the high amperage dwell circuits of performance ignition modules for faster charging and full coil saturation at higher RPM levels, translating into better performance. High temperature epoxy resists shock and vibration while providing excellent thermal conductivity ensuring long service life. Specially designed to work with E3.1414 HEI Distributor.
Product Features:
See More
Product Features:
- Designed to with aftermarket 4-pin modules and high performance electronic controls
- High temperature epoxy provides excellent thermal conductivity and long life
- Maximum voltage of 48,000 volts
- Crosses to MSD 8225
Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1475)
from
$25.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Built by IATF 16949 certified manufacturers for consistent durability
- Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
- Segmented secondary bobbins to distribute high voltage and prevent shorting
- Extensive design validation testing to ensure long-lasting reliability
- 100% end-of-line tested to ensure proper performance
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
Carquest – Ignition Coil: Meets OE Specifications, 1 Count (Part No.26C1041)
from
$35.49
Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle’s ignition system performance. Carquest ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Long service life and durable performance
- High dielectric strength for reliability
- Corrosion-resistant connections
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
- High reliability
- Long service life
Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1416)
from
$81.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Built by IATF 16949 certified manufacturers for consistent durability
- Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
- Segmented secondary bobbins to distribute high voltage and prevent shorting
- Extensive design validation testing to ensure long-lasting reliability
- 100% end-of-line tested to ensure proper performance
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
Carquest – Ignition Coil: Meets OE Specifications, 1 Count (Part No.26C1037)
from
$21.99
Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle¿s ignition system performance. Carquest ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Long service life and durable performance
- High dielectric strength for reliability
- Corrosion-resistant connections
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
- High reliability
- Long service life
ACDelco – Ignition Coil (Part No.U505)
from
$78.99
An ACDelco Professional, premium aftermarket Ignition Coil is a high quality replacement for many vehicles on the road today. It increases electrical system voltage to help ignite the air/fuel mixture as the starting and charging system starts the engine, maintains the battery’s charge, and provides power to the electrical accessories while the engine is running. An ACDelco Professional Ignition Coil uses pure copper windings to improve durability and provides higher resistance to internal shorts and dielectric breakdown. Because the number and shape of the laminations determine the output characteristics of an ignition coil, ACDelco ensures that the silicone steel plates surrounding the ignition coil correctly match the original part size and number. Since steel laminations work best when they are new, shiny, and clean, ACDelco laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed. This premium aftermarket replacement ignition coil is manufactured to meet your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
- Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
- Laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
Carquest – Ignition Coil (Part No.26C1078)
from
$34.49
Carquest Ignition Coils ensure fast starts, consistent engine performance and optimized fuel efficiency at an affordable cost.
Product Features:
See More
Product Features:
- High output
- Long spark duration
- High dielectric strength
- Corrosion resistant connections
- High reliability
- Long service life
Carquest – Ignition Coil (Part No.E70)
from
$39.05
BWD® is an aftermarket leader, providing a premium line of engine management products. BWD® manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD® is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.
Product Features:
See More
Product Features:
- Manufactured with copper windings and permanent magnets to ensure strong signal emission and improved performance
- High temperature enameled wires were specified for better insulation and performance
- A full E-Lam core of silicon steel and solid brass high voltage terminals protects against corrosion. Our ignition coils are built for maximum output voltage
- Primary and Secondary windings feature enamel magnet wire for the highest temperature rating in the aftermarket
- As a tier I manufacturer with engineering and design capabilities second to none, our ignition coils are made to the highest quality standards
Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1715)
from
$41.49
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
- Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1414)
from
$41.49
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Built by IATF 16949 certified manufacturers for consistent durability
- Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
- Segmented secondary bobbins to distribute high voltage and prevent shorting
- Extensive design validation testing to ensure long-lasting reliability
- 100% end-of-line tested to ensure proper performance
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
ACDelco – Ignition Coil (Part No.D504A)
from
$99.99
An ACDelco Professional, premium aftermarket Ignition Coil is a high quality replacement for many vehicles on the road today. It increases electrical system voltage to help ignite the air/fuel mixture as the starting and charging system starts the engine, maintains the battery’s charge, and provides power to the electrical accessories while the engine is running. An ACDelco Professional Ignition Coil uses pure copper windings to improve durability and provides higher resistance to internal shorts and dielectric breakdown. Because the number and shape of the laminations determine the output characteristics of an ignition coil, ACDelco ensures that the silicone steel plates surrounding the ignition coil correctly match the original part size and number. Since steel laminations work best when they are new, shiny, and clean, ACDelco laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed. This premium aftermarket replacement ignition coil is manufactured to meet your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
- Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
- Laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
Driveworks – Electronic Ignition Coil (Part No.26196)
from
$31.99
Driveworks® offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.
Product Features:
See More
Product Features:
- Direct-fit OE replacement ensures ease of installation
- Designed to meet OE performance
- As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
- As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
Popular 1978 Avanti II Ignition and Tune-Up Products Categories
1978 Avanti II Ignition and Tune-Up Products
You count on your 1978 Avanti II to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 33 Ignition and Tune-Up Products ranging in price from $2.29 to $193.99, you’re sure to find everything you need for your 1978 Avanti II.
Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 13 different brands like ACDelco, Autolite, and Motorcraft. 1978 Avanti II Ignition and Tune-Up Products start as low as $2.29!
One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 565 extensive product reviews on 1978 Avanti II Ignition and Tune-Up Products. Some of the top-rated Ignition and Tune-Up Products products we carry are Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration with 4.9 stars and Platinum Spark Plug: Enhances Durability & Reduces Misfires with 4.8 stars.
Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 1978 Avanti II below to get started!
Top-Rated Ignition and Tune-Up Products Brands For Your 1978 Avanti II
Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1978 Avanti II running right for years to come. In our inventory you’ll find brands like ACDelco, Autolite, Motorcraft, and even more.
Popular Champion Ignition and Tune-Up Products
You’ll find popular Champion brand products across Spark Plugs. All are waiting to get your 1978 Avanti II back on the road. Some of the top-rated Champion products in these categories are:
Top-Rated Ignition and Tune-Up Products
If are what you’re looking for, our inventory holds plenty. We stock brand Ignition and Tune-Up Products for your 1978 Avanti II, and some of our most reviewed parts include:
FAQs for 1978 Avanti II Ignition and Tune-Up Products
What are the most purchased Ignition and Tune-Up Products for the 1978 Avanti II?
Out of 33 Ignition and Tune-Up Products for the 1978 Avanti II, the most popular in our inventory are:
What are the top-rated 1978 Avanti II Ignition and Tune-Up Products?
Top-rated Ignition and Tune-Up Products for your 1978 Avanti II based on customer reviews/ratings are:
from
$3.49
(50)
Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration
“Nice solid plugs…has worked great in my new rebuild..”
