1977 Toyota Celica Filters and PCVs

Essential 1977 Toyota Celica Filters and PCVs

Carquest Standard – Engine Air Filter: Meets Original Equipment Specifications (Part No.R88244)

Engine Air Filter: Meets Original Equipment Specifications

from

$13.49
Carquest Standard engine air filters are designed to remove airborne contaminants and optimize engine performance in all driving conditions. Each air filter features cured filter media that increases tensile strength, allowing the filter to maintain high-pressure requirements without collapse. Carquest Standard air filters use a polyurethane construction that provides higher tear strength and more structural support. Our Carquest Standard air filters meet original equipment (O.E.) standards and fulfill the requirements for maintaining a new vehicle warranty.
See More

Carquest Premium – Air Filter (Part No.88165)

Air Filter

from

$8.29
Blocks dust, dirt, bacteria and pollution that can interrupt engine performance. Designed to offer consistent air flow to help increase horsepower and acceleration

Product Features:
  • Prescription filtration provides stronger resistance against moisture and collapse from rain and snow
  • Optimum pleat count provides a higher filtration function
  • Superior protection for vehicles in dusty or dirty environments, snow, high heat/humidity and frequent trips less than 10 miles
See More

Carquest Premium – Full-Flow Lube Spin-on (Part No.85068HD)

Full-Flow Lube Spin-on

from

$13.49
Carquest spin-on lube filters protect your engine from wear particles that can otherwise lead to premature parts failure.

Product Features:
  • Contains Anti-Drainback Valve;8 PSID By-Pass Valve
  • Made in USA
See More

FRAM Drive – Spin-on Oil Filter: Ideal for Conventional Oil, Protection up to 7,500 miles (Part No.FD16)

Spin-on Oil Filter: Ideal for Conventional Oil, Protection up to 7,500 miles

from

$6.49
FRAM Drive¿ is the perfect oil filter for everyday driver. Designed with OE grade synthetic blend media and compatible with both conventional and synthetic oil types, FRAM Drive¿ keeps engine protected for up to 7,500 miles (12,000 kilometers). FRAM Drive¿ is engineered to withstand high temperatures and endure working pressures common in today¿s engines.

Product Features:
  • Proven protection for up to 7,500 miles
  • Engineered for use with synthetic or conventional motor oil
  • Precision Relief Valve provides consistent oil flow, even in cold conditions
  • Designed for everyday drivers who perform oil changes at OE (original equipment) recommended intervals
See More

Carquest Premium – Oil Filter (Part No.85068)

Oil Filter

from

$7.49
CARQUEST Premium Oil Filters give you the level of quality and performance from the trusted CARQUEST name.

Product Features:
  • 99.5% efficiency rating at 20 microns
  • Blended media proven for up to 10,000 miles in taxi cab fleet testing
  • High efficiency and durable cellulose/synthetic blended media for longer drain intervals
  • Silicone anti-drainback valve has 3X the durability verses nitrile for engine start-up protection
  • Metal end caps
  • Internally lubricated gasket
  • Precision coil spring relief valve
See More

Carquest Premium – Oil Filter: Ideal for Synthetic Oil, Protection up to 10,000 Miles (Part No.84145)

Oil Filter: Ideal for Synthetic Oil, Protection up to 10,000 Miles

from

$8.99
Carquest Premium oil filters are built for durability, utilizing enhanced components to protect engines for the extended drain intervals of modern vehicles using conventional or synthetic lubricants. Our oil filters are built with synthetic blend media that provides 2X the capacity and up to 10,000 miles of protection. Carquest Premium filters feature silicone sealing gaskets for better performance in extreme temperatures. Carquest Premium oil filters meet or exceed original equipment (O.E.) specifications and meet the requirements for maintaining a new vehicle warranty.

Product Features:
  • Protection for up to 10,000 miles
  • Synthetic blend media provides 99.5% efficiency at 20 microns and 2X capacity vs. Standard filters
  • Solid metal end caps are designed to be long lasting
  • Silicone anti-drain back valve for engine start-up protection
  • Heavy-duty steel baseplate provides additional strength to resist leakage
  • Heavy gauge steel canister withstands high pressure operating conditions
  • Silicone sealing gasket performs better in extreme temperature conditions and longer drain intervals (silicone gasket is new feature introduced as a running change)
  • Meets requirements for maintaining new vehicle warranties
See More

ATP – AT FLTR 5/16 D BARB (Part No.JX-151)

AT FLTR 5/16 D BARB

from

$42.99
AT FLTR 5/16 D BARB

Carquest Premium – Automatic Transmission Filter Kit: Sump, Original Equipment Fit, Form And Function, 1 Pack (Part No.85902)

Automatic Transmission Filter Kit: Sump, Original Equipment Fit, Form And Function, 1 Pack

from

$23.99
Provides OE-quality filtration to remove contaminants and extend the life of your transmission. Domestic and import applications available. Where applicable, sure hold gaskets are designed to keep your pan gasket in place during installation. Filtering media may consist of felt, paper, or stainless screens that meet original or exceed original OE specifications. Meets or exceeds all OEM fit and quality requirements. High efficiency filtration. Prevents loose material from re-entering the transmission.

Product Features:
  • Guaranteed OE quality form, fit and function
  • Superior quality filter media traps harmful contaminants, ensuring clean transmission fluid to protect your transmission and its components
  • Premium Sure Hold gaskets hold pan bolts in place for easy installation and guarantee a leak-free seal. Gasket may not be included with every kit.
See More

Pro-King – Automatic Transmission Filter Kit (Part No.FK-195)

Automatic Transmission Filter Kit

from

$11.69
Provides OE-quality filtration. Sure Hold gaskets are designed to keep your pan gasket in place during installation. Includes trilingual instructions.
See More

Fram – In-Line Gasoline Filter (Part No.G6346)

In-Line Gasoline Filter

from

$31.99
This high-volume accessory is designed to promote efficient fuel injection performance. Fram® offers exceptional domestic and import fuel filter coverage to meet the needs of virtually all engine configurations.

Product Features:
  • Designed for use in modern fuel injection systems and with oxygenated fuels
See More

Carquest Premium – 14×1.5MM INLET – 12X1.25MM OUTLET METAL UNIVERSAL FUEL FILTER (Part No.86502)

14x1.5MM INLET - 12X1.25MM OUTLET METAL UNIVERSAL FUEL FILTER

from

$32.99
CARQUEST offers high quality, high efficiency fuel filters for automotive, medium and heavy trucks as well as farm, construction, mining and other equipment applications.

Product Features:
  • Keeps dirt, debris and contaminants from clogging fuel lines and causing erratic, unstable fuel performance
  • Manufactured to a strict quality standards with 98% efficiency at a 10 micron rating.
  • Provides maximum fuel system protection.
  • Designed to meet or exceed Original Equipment specifications
  • Protects the injectors from debris that cause damage and clogging.
  • Provides less restriction preventing the fuel pump from working too hard.
  • Superior materials, design and construction ensure CARQUEST fuel filters provide excellent performance under all types of operating conditions.
See More

Fram – In-Line Gasoline Filter (Part No.G6859)

In-Line Gasoline Filter

from

$20.59
This high-volume accessory is designed to promote efficient fuel injection performance. FRAM® offers exceptional domestic and import fuel filter coverage to meet the needs of virtually all engine configurations.

Product Features:
  • Designed for use in modern fuel injection systems and with oxygenated fuels
See More

Imperial – Remote Mount Filter Kit – Universal (Part No.240291)

Remote Mount Filter Kit - Universal

from

$95.99
For use when relocating the oil filter is necessary. Includes all required hardware except hoses.

Product Features:
  • Remote mount filter kit
  • For use when relocation of the oil filter is necessary
  • Comes with all necessary hardware except hoses
See More

Dorman – Aluminum With Rubber Coating Drain Plug Gasket, Fits M12 (Part No.095-156.1)

Aluminum With Rubber Coating Drain Plug Gasket, Fits M12

from

$3.49
These oil drain plug gaskets are designed to specific sizes and standards for reliable replacement at every oil change.

Product Features:
  • Direct replacement – these engine oil drain plug gaskets are made to match the fit and performance of the original equipment components
  • Restores functionality – built to restore a proper seal
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Fiber Engine Oil Drain Plug Gasket: Fits 11/16 Single Oversize, M18, 5 Pack (Part No.097-018CD)

Fiber Engine Oil Drain Plug Gasket: Fits 11/16 Single Oversize, M18, 5 Pack

from

$3.49
These oil drain plug gaskets are designed to specific sizes and standards for reliable replacement at every oil change.

Product Features:
  • Direct replacement – these engine oil drain plug gaskets are made to match the fit and performance of the original equipment components
  • Restores functionality – built to restore a proper seal
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Aluminum With Rubber Coating Engine Oil Drain Plug Gasket: Fits M12, 2 Pack (Part No.095-156CD)

Aluminum With Rubber Coating Engine Oil Drain Plug Gasket: Fits M12, 2 Pack

from

$3.49
These oil drain plug gaskets are designed to specific sizes and standards for reliable replacement at every oil change.

Product Features:
  • Direct replacement – these engine oil drain plug gaskets are made to match the fit and performance of the original equipment components
  • Restores functionality – built to restore a proper seal
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – PCV Grommet (Part No.B2140751306DOR)

PCV Grommet

from

$6.20
Provide an airtight seal for the PCV valve with Dorman’s resilient PCV Grommet. Made from oil-resistant rubber, the grommet is durable against severe heat and fluctuating under hood temperatures. Its bevelled design helps ensure a secure fit. It is excellent for the repair of emission and vacuum systems on cars, trucks and tractors.

Product Features:
  • Leak-resistant for maximum performance
  • Crack-resistant for long-lasting use
  • Easy to install – just press it into place
  • No special tools required for installation
See More

Ishino – PCV Valve Grommet (Part No.B2140137582ISH)

PCV Valve Grommet

from

$2.75
PCV Valve Grommet

Dorman – Help – PCV Valve Grommet – 0.427 In. ID – 1.159 In. OD – 0.624 In. Thickness (Part No.42057)

PCV Valve Grommet - 0.427 In. ID - 1.159 In. OD - 0.624 In. Thickness

from

$5.99
This PCV valve grommet is designed to match the fit and function of the original grommet on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this PCV valve grommet is designed to match the fit and function of the original grommet on specified vehicles
  • Restores functionality – this grommet is made to fit and fully restore part functionality after the original grommet fails
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Help – PCV Valve Grommet – 0.428 In. ID – 0.983 In. OD – 0.610 In. Thickness (Part No.42058)

PCV Valve Grommet - 0.428 In. ID - 0.983 In. OD - 0.610 In. Thickness

from

$5.99
This PCV valve grommet is designed to match the fit and function of the original grommet on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this PCV valve grommet is designed to match the fit and function of the original grommet on specified vehicles
  • Restores functionality – this grommet is made to fit and fully restore part functionality after the original grommet fails
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Beck/Arnley – Transmission Filter Kit (Part No.044-0246)

Transmission Filter Kit

from

$39.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Includes o-rings and/or gaskets that are required for complete filter installation
  • A premium Made rubber pan gasket is included if applicable
  • Be sure to use the specific ATF formulated for this transmission – check Beck/Arnley catalog
  • Application specific for this vehicle
See More

Pro-King – Automatic Transmission Filter Kit (Part No.FK-136)

Automatic Transmission Filter Kit

from

$6.39
Provides OE-quality filtration. Sure Hold gaskets are designed to keep your pan gasket in place during installation. Includes trilingual instructions.
See More

ATP – AT IN-LINE FLTR 5/16 (Part No.JX-150)

AT IN-LINE FLTR 5/16

from

$42.99
AT IN-LINE FLTR 5/16

Beck/Arnley – Transmission Filter Kit (Part No.044-0316)

Transmission Filter Kit

from

$40.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Includes o-rings and/or gaskets that are required for complete filter installation
  • A premium Made rubber pan gasket is included if applicable
  • Be sure to use the specific ATF formulated for this transmission – check Beck/Arnley catalog
  • Application specific for this vehicle
See More

Accufit – Oil Drain Plug, M12 x 1.25 (Part No.ODP-00011B)

Oil Drain Plug, M12 x 1.25

from

$5.49
AGS ACCUFIT Oil Drain Plug is a high-coverage/low-part number program that covers up to 93% of all vehicles on the road, including domestic, European, Japanese, British, and Korean models, while reducing inventory and associated costs by 80%. Reducing stocked part numbers to just 13 and the superior quality built-in features make ACCUFIT your number one choice for oil drain plugs. Easy Install – Finger-grip wing for ease of installation. All plugs have 14mm hex – just one wrench works for all! Hi-Temp Gasket – Red hi-temp gasket for max sealing protection. Easy ID – Thread size etched on each plug. Rust Protection – Black oxide coating for rust and corrosion protection. Avoid Cross-Threading – Pilot-point tip to avoid cross-threading during installation.

Product Features:
  • Easy Install – Finger-grip wing for ease of installation
  • All plugs have 14mm hex – just one wrench works for all
  • Hi-Temp Gasket – Red hi-temp gasket for max sealing protection
See More

Professional Parts Sweden – Oil Drain Plug (Part No.A6110458683PPS)

Oil Drain Plug

from

$4.21
Oil Drain Plug

Dorman – Standard Engine Oil Drain Plug: M12-1.25 Thread, 14 mm Head, 1 Pack (Part No.090-038CD)

Standard Engine Oil Drain Plug: M12-1.25 Thread, 14 mm Head, 1 Pack

from

$4.99
This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.

Product Features:
  • Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
  • Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

MTC – Oil Drain Plug, Magnetic – w/o Gasket (Part No.A6110458683MTC)

Oil Drain Plug, Magnetic - w/o Gasket

from

$9.15
Oil Drain Plug, Magnetic – w/o Gasket

1977 Toyota Celica Filters and PCVs

You count on your 1977 Toyota Celica to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Filters and PCVs. With 40 Filters and PCVs ranging in price from $1.49 to $95.99, you’re sure to find everything you need for your 1977 Toyota Celica.

Brands matter. If you want to shop a specific Filters and PCVs brand, we stock 17 different brands like Mobil Oil, Purolator, and Fram. 1977 Toyota Celica Filters and PCVs start as low as $1.49!

One of the best ways to find top quality OEM or aftermarket Filters and PCVs is by asking professionals. Short of that, you can shop with confidence thanks to our 1,187 extensive product reviews on 1977 Toyota Celica Filters and PCVs. Some of the top-rated Filters and PCVs products we carry are Extended Performance Oil Filter with 4.8 stars and Extended Performance Oil Filter with 4.8 stars.

Did we mention you can order your Filters and PCVs from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Filters and PCVs inventory for your 1977 Toyota Celica below to get started!

Top-Rated Filters and PCVs Brands For Your 1977 Toyota Celica

Trusted Filters and PCVs OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1977 Toyota Celica running right for years to come. In our inventory you’ll find brands like Mobil Oil, Purolator, Fram, and even more.

Popular Accufit Filters and PCVs

You’ll find popular Accufit brand products across Oil Filters. All are waiting to get your 1977 Toyota Celica back on the road. Some of the top-rated Accufit products in these categories are:
Oil Drain Plug, M18 x 1.5
from $4.99
(1)
Oil Drain Plug, M18 x 1.5
Oil Pan Drain Plugs

Top-Rated Purolator ONE Filters and PCVs


If Purolator ONE are what you’re looking for, our inventory holds plenty. We stock Purolator ONE brand Filters and PCVs for your 1977 Toyota Celica, and some of our most reviewed Purolator ONE parts include:

FAQs for 1977 Toyota Celica Filters and PCVs

What are the most purchased Filters and PCVs for the 1977 Toyota Celica?

Out of 40 Filters and PCVs for the 1977 Toyota Celica, the most popular in our inventory are:
MOBIL 1 - OIL FILTER
from $16.99
This product is not rated
MOBIL 1 – OIL FILTER
Oil Filters

What are the top-rated 1977 Toyota Celica Filters and PCVs?

Top-rated Filters and PCVs for your 1977 Toyota Celica based on customer reviews/ratings are:
Extended Performance Oil Filter
from $14.99
(87)
Extended Performance Oil Filter
“I use this with my synthetic oil all the time…I change it around 6000 miles”
Extended Performance Oil Filter
from $14.99
(77)
Extended Performance Oil Filter
“good”
Oil Filter: Ideal for Synthetic Oil, Protection up to 10,000 Miles
from $7.79
(74)
Oil Filter: Ideal for Synthetic Oil, Protection up to 10,000 Miles
“Good product at great price”