1977 Oldsmobile Cutlass Performance and Racing Products

Essential 1977 Oldsmobile Cutlass Performance and Racing Products

MSD Ignition – Distributor Cap; GM HEI; Late Model; External Coil (Part No.8426)

Distributor Cap; GM HEI; Late Model; External Coil

from

$35.99
All MSD extra duty distributor caps are designed with performance in mind and are molded from high quality, voltage insulating material and use low resistance terminals.

Product Features:
  • Designed w/Performance In Mind
  • High Quality; Voltage Insulating Material
See More

B & M – Torque Converter, Nitrous Holeshot 3000 (Part No.20481)

Torque Converter, Nitrous Holeshot 3000

from

$696.99
Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.

Product Features:
  • 2800-3200 RPM
  • Small And Big Blocks
  • Serious Performance
  • Furnace Brazed
  • Fully Balanced
See More

Spectre – Differential Cover (Part No.60879)

Differential Cover

from

$189.99
Spectre’s Polished Aluminum Differential Covers feature a finned design and 10 bolt assembly for optimum fit and function. Includes 10 SAE standard bolts for installation. You’ll need to supply your own bolts if your vehicle uses metric bolts. Manufactured using high quality materials this product was designed to perform as well as they look.

Product Features:
  • Polished aluminum
  • 10 bolt cover with finned design
  • Gasket included
  • 10 gold Iridite 3/8 inch -18 x 3/4 inch differential cover bolts included
See More

Energy Suspension – Tie Rod Dust Boot (Part No.9.13102G)

Tie Rod Dust Boot

from

$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:
  • Easy to Install
  • Superior Material
  • Saves Your Tie Rods
  • Lasts Longer
  • Looks Great
See More

Edelbrock – Performer RPM 2 Carb/Plate Nitrous Systems Square-Bore Carbs (200-300-400+ Hp) (Part No.70056)

Performer RPM 2 Carb/Plate Nitrous Systems Square-Bore Carbs (200-300-400+ Hp)

from

$1243.99
Designed for carburetor V8 engines. Power increases from 200 to 400 horsepower. Simple to install. Shorter spray bars. More even distribution across the plenum. A more balanced air and fuel ratio. Quicker response time.

Product Features:
  • Designed For Carbureted V8 Engines
  • Power Increases From 200-400_ HP
  • Simple To Install
  • Shorter Spray Bars
  • More Even Distribution Across The Plenum
  • A More Balanced Air/Fuel ratio
  • Quicker Response Time
See More

Edelbrock – Performer Series Retainer (Qty 16) (Part No.9724)

Performer Series Retainer (Qty 16)

from

$100.99
Product Features:
  • Use W/ Valve Springs Part #5822, 5882, 5896, 5872, 5867, 5812, 5857
  • Set of 16
  • 1.50 in. Outside Diameter
  • Steel Material
  • Black Oxide Finish
See More

Flowtech – Standard Header (Part No.11150FLT)

Standard Header

from

$284.99


Product Features:
  • Fuel Economy From The Engine
  • Leak Test For Max Performance
  • Mandrel-Formed Power Plenum
  • Leakproof O-Ringed Port Seals
  • Include All Mounting Hardware
See More

Energy Suspension – Control Arm Bushing Set (Part No.3.3169R)

Control Arm Bushing Set

from

$57.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:
  • Maintains Better Alignment While Driving
  • Full Floating and Non Binding
  • Fits Into the Remaining Stock Control Arms
See More

Accel – Custom Fit 8.8mm; Spark Plug Wire Set (Part No.8848)

Custom Fit 8.8mm; Spark Plug Wire Set

from

$122.99
These ACCEL wire sets are custom tailored for true street and strip performance use. Features oversize 8.8 mm ultra performance wires and spark plug boots, 550 degrees Fahrenheit double silicone construction with fiberglass braid. Spiral wound steel core conductor.

Product Features:
  • 8.8mm Graphite Suppression
  • Silicone Spark Plug Boots
  • 550 Degree Double Silicone Construction
  • Fiberglass Braid
  • Carbon/Graphite Core
  • Magnetic Suppression
  • Fiberglass/Kevlar Core
  • 500 Ohms Resistance
See More

Mr. Gasket – Distributor Hold-Down Clamp (Part No.1009)

Distributor Hold-Down Clamp

from

$9.99
Add sparkle to your engine with this chromed hold-down clamp. With bolt and gasket. Serrations on the bottom prevent distributor and magneto rotation for accurate timing.

Product Features:
  • Rolled Edges For Strength
  • Ideal For Magnetos
  • Ideal For Ignition Distributor
See More

FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1814)

PERFORMANCE OIL PAN GASKET SET

from

$30.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
  • With steel core to provide ultimate excellent blowout resistance.
  • Not intended for use in emission controlled vehicles.
See More

Spectre – Oil Pan (Part No.5501)

Oil Pan

from

$74.99
This Spectre Oil Pan features a steel construction and an unplated raw finish. This stock capacity oil pan was designed for 1980-1985 small block Chevrolet 305-350 engines with passenger’s side dipstick. This product was engineered for optimum fit and function.

Product Features:
  • Steel construction
  • Unplated raw finish
  • Stock capacity
  • For 1980-1985 small block Chevrolet 305-350 engines with passenger’s side dipstick
See More

B & M – Automatic Shifter, Megashifter-Right Hand Drive (Part No.80685)

Automatic Shifter, Megashifter-Right Hand Drive

from

$456.99
The B&M Megashifter has it all, form, function and classic style. This all adds up to bring you a quality shifter that’s been one of the most popular automatic shifters of all time. The light truck Megashifter is better suited for truck and bench seat app

Product Features:
  • Universal Floor Mount Application
  • Cable Operated
  • Quick Installation
  • Accurate Shifting
  • NHRA/IHRA Reverse Lockout Meets Requirements
See More

Motive Gear – Performance Differential Ring and Pinion (Part No.G885456)

Performance Differential Ring and Pinion

from

$343.99


Product Features:
  • GM 10BL 8.5 R/P 4.56 FRT/REAR MGP
See More

Energy Suspension – Motor Mount (Part No.3.1116G)

Motor Mount

from

$38.99
A true performance application component for cars, trucks, hot rods and racing/competition vehicles – yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged for racing use. When required- a torque resistant safety interlock design is used that is comparable in strength to those too hard-running metal mounts. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal motor mounts. The popular early style mounts for General Motors vehicles are available in either zinc or chrome metal finishes. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluids such as: oils, coolants, road contaminants, etc.

Product Features:
  • Gains Both Performance and Longevity
  • Will Handle Any and All Torque
  • Out Lasts Rubber
See More

Mallory – Distributor Wiring Harness (Part No.29349)

Distributor Wiring Harness

from

$25.99


Product Features:
  • Service Part
  • Makes Connections Quick And Easy
See More

Edelbrock – Sure Seat; Valve Spring (Part No.5712)

Sure Seat; Valve Spring

from

$128.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks black oxide coated. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:
  • For Use With Cast Iron Heads
  • Springs Made of Highest Quality Spring Wire
  • Springs Precision Wound To Close Tolerances
  • Use with Original Equipment Heads Only
See More

Flowmaster Inc. – 40 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.42443)

40 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound

from

$99.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

Edelbrock – Nitrous Performer EFI Wet System (Part No.71820)

Nitrous Performer EFI Wet System

from

$730.99


Product Features:
  • Best Way To Get A Major Power Increase
  • Power Increases From 50-70 HP
  • Work With Stock ECU
  • Simple Installation
See More

Weiand – Supercharger Remote Thermostat Housing (Part No.7134P)

Supercharger Remote Thermostat Housing

from

$164.99


Product Features:
  • Remote Thermostat Housing
See More

Energy Suspension – Hyper-Flex System (Part No.3.18111G)

Hyper-Flex System

from

$357.99
Product Features:
  • Incredible Improvement in Control
  • Maintains Proper Caster and Camber Alignment
  • Increase in Handling and Control
  • Greatly Reduce Wheel Hop on Quick Acceleration
  • Even Braking Control is Improved
  • Better Suspension Stability
See More

Edelbrock – C357-B Three-Deuce; Intake Manifold (Part No.5417)

C357-B Three-Deuce; Intake Manifold

from

$362.99


Product Features:
  • For 1996+ Vortec (L31) or Edelbrock E-Tec Heads
  • Manifold has a Balanced 180+ Firing Order
  • Contains Exhaust Gas Heat Riser
  • Offers Excellent Performance Potential
  • Front Oil Filler Tube Boss Included
  • Carburetor Center-to-Center Dimensions = 5-1/2 in
  • Also Available Polished PN[5419] But Not Fit HEI
  • Use Rochester 2GC (small 1-7/16 in bore)
See More

Energy Suspension – Sway Bar End Link Kit (Part No.9.8119G)

Sway Bar End Link Kit

from

$29.99
Made of high durometer, very firm, Hyper-Flex performance polyurethane. They’re economical, increase efficiency and are easy to install. Use Energy Suspension sway bar end links with sway bar bushings to get the maximum performance benefit. Combine both for the same effect as buying a larger sway bar. Together they offer a dramatic improvement in performance and handling.

Product Features:
  • Made from HYPER-Flex Polyurethane
  • Allows Vehicle to Work At Maximum Efficiency
  • Easy to Install
  • Superior Performance and Greater Longevity
  • Lasts Much Longer Than OEM Rubber End Links
See More

Mr. Gasket – Intake Manifold Bolts (Part No.957G)

Intake Manifold Bolts

from

$21.99
Choose from grade 5 hex or socket head intake bolts or grade 8 bolts with twelve point smaller-than-standard head and flange, ideal for where space is minimal. Bolts and washers are bright zinc plated for protection and appearance.

Product Features:
  • Grade 8 material
  • Extra thick flat washers
  • Ideal for minimal space
  • 12-pt head and flange
  • Zinc plated for protection
See More

Energy Suspension – Control Arm Bushing Set (Part No.3.3168G)

Control Arm Bushing Set

from

$57.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:
  • Maintains Better Alignment While Driving
  • Full Floating and Non Binding
  • Fits Into the Remaining Stock Control Arms
See More

B & M – Shift Improver Kit For 68-81 TH-350 Transmission (Part No.30262)

Shift Improver Kit For 68-81 TH-350 Transmission

from

$59.99
HEAVY DUTY-Firm positive shifts without loss of driver comfort for improved performance in all street vehicles. STREET/STRIP-Positive shifts for high performance street use or for competitive events. Hardest, quickest possible shift.

Product Features:
  • Provides Crisp Shifts
  • On Any Stock Automatic Transmission
  • Eliminates Soft/Sluggish Shift
  • Eliminates Shift Overlap
  • Eliminate Clutch and Band Wear
See More

FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2903)

Engine Crankshaft Seal Kit

from

$15.29
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for repair applications
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Mr. Gasket – Throttle Cable Bracket (Part No.9885)

Throttle Cable Bracket

from

$14.99
The throttle cable bracket is designed for small block Chevy engines thru 1979 and is to be used in conjunction with the kick down cable Pn9886 for the Turbo 350 transmission. The throttle cable bracket mounts on the intake manifold and will hold cables with round or square mounts. It has a 2 inch adjustable range and is finished off in a beautiful chrome plating.

Product Features:
  • 2 in. adjustable range
  • Includes necessary hardware
  • Chrome plated
  • Individually packaged
See More

1977 Oldsmobile Cutlass Performance and Racing Products

You count on your 1977 Oldsmobile Cutlass to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 94 Performance and Racing Products ranging in price from $5.99 to $1,243.99, you’re sure to find everything you need for your 1977 Oldsmobile Cutlass.

Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 18 different brands like Energy Suspension, Mr. Gasket, and Edelbrock. 1977 Oldsmobile Cutlass Performance and Racing Products start as low as $5.99!

One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 690 extensive product reviews on 1977 Oldsmobile Cutlass Performance and Racing Products. Some of the top-rated Performance and Racing Products products we carry are Differential Ring And Pinion with 4.2 stars and Performer Carburetor #9906 600 CFM With Electric Choke, Satin Finish (Non-EGR) with 3.8 stars.

Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 1977 Oldsmobile Cutlass below to get started!

Top-Rated Performance and Racing Products Brands For Your 1977 Oldsmobile Cutlass

Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1977 Oldsmobile Cutlass running right for years to come. In our inventory you’ll find brands like Energy Suspension, Mr. Gasket, Edelbrock, and even more.

Popular K&N Performance and Racing Products

You’ll find popular K&N brand products across Performance Air Filters. All are waiting to get your 1977 Oldsmobile Cutlass back on the road. Some of the top-rated K&N products in these categories are:

Top-Rated Energy Suspension Performance and Racing Products


If Energy Suspension are what you’re looking for, our inventory holds plenty. We stock Energy Suspension brand Performance and Racing Products for your 1977 Oldsmobile Cutlass, and some of our most reviewed Energy Suspension parts include:
Transmission Mount
from $41.99
(17)
Transmission Mount
Performance Engine and Transmission Mounts
Sway Bar End Link Kit
from $25.99
(7)
Sway Bar End Link Kit
Performance Sway Bar Link Kits
Control Arm Bump Stop Set
from $11.99
(2)
Control Arm Bump Stop Set
Performance Chassis Bump Stops

FAQs for 1977 Oldsmobile Cutlass Performance and Racing Products

What are the most purchased Performance and Racing Products for the 1977 Oldsmobile Cutlass?

Out of 94 Performance and Racing Products for the 1977 Oldsmobile Cutlass, the most popular in our inventory are:
Tie Rod Dust Boot
from $9.99
(1)
Tie Rod Dust Boot
Performance Tie Rod End Boots
Oil Pan Bolt Kit
from $16.99
This product is not rated
Oil Pan Bolt Kit
Performance Oil Pans

What are the top-rated 1977 Oldsmobile Cutlass Performance and Racing Products?

Top-rated Performance and Racing Products for your 1977 Oldsmobile Cutlass based on customer reviews/ratings are:
Differential Ring And Pinion
from $342.99
(23)
Differential Ring And Pinion
“Good product good price”
Performer Carburetor #9906 600 CFM With Electric Choke, Satin Finish (Non-EGR)
from $397.99
(5)
Performer Carburetor #9906 600 CFM With Electric Choke, Satin Finish (Non-EGR)
“easy to install all the gaskets and parts came with it”
HEI Advance Curve Kit
from $15.99
(4)
HEI Advance Curve Kit
“Used on 78 Corvette stock distributor on L48 350. Used gold springs and clockwise fit. Set timing to 36 degrees at 2500 rpm. Seems to be running great”