1977 Lincoln Mark V Performance Engines

More 1977 Lincoln Mark V Performance Engines

Find your specific 1977 Lincoln Mark V original or aftermarket Performance Engines below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1977 Lincoln Mark V Performance Engines

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1617)

Engine Valve Cover Gasket Set

from

$33.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Die cut silicone rubber gaskets conform to out-of-flat covers
  • Great for on-again/off-again situations
  • Not intended for use in emission controlled vehicles.
See More
View Product

Mr. Gasket – Ultra Seal; Harmonic Balancer Bolt/Washer Kit (Part No.7847)

Ultra Seal; Harmonic Balancer Bolt/Washer Kit

from

$35.99
The grade 8 bolts feature high hex head to prevent socket slippage. The thick parallel ground washer allows accurate uniform torque. Black finished, complete with split lock washer to prevent loosening.

Product Features:
  • Grade 8 material
  • Heat-treated for strength
  • Hex prevents socket slippage
  • Accurate and uniform torque
  • Black plated finish
See More
View Product

Spectre – Water Neck; Ford 429-460 (Part No.4734)

Water Neck; Ford 429-460

from

$54.99
Spectre’s Ford V8 water neck fits Ford 429 – 460 engines. This water neck has been designed around the OEM specifications and has a chrome plated finish for a lasting look that fits great. This water neck includes sealing O-ring, and has a 3/8 inch NPT threaded hole for the Ford temp sensor.

Product Features:
  • Fits Ford 429 – 460 engines
  • Has a 3/8 inch NPT threaded hole for temperature sensor
  • Includes sealing O-ring
  • Chrome plated
  • Easy to install
  • Hardware not included
See More
View Product

FEL-PRO Performance – Lower Intake Manifold Gasket Set: 7 Piece Set (Part No.1240)

Lower Intake Manifold Gasket Set: 7 Piece Set

from

$39.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Fel-Pro performance intake manifold gaskets have been tested with virtually all aftermarket cylinder head and intake manifold combinations.
  • Performance intake manifold gaskets designed without a metal core, to allow engine builders to trim the gasket for exact fit on modified ports.
  • 1970-82; w/2 Bbl. Cylinder heads
  • Printoseal elastomeric sealing beads to provide extra sealing strength around the intake port.
  • Not intended for use in emission controlled vehicles.
See More
View Product

FEL-PRO Performance – Lower Intake Manifold Gasket Set: 5 Piece Set (Part No.1230)

Lower Intake Manifold Gasket Set: 5 Piece Set

from

$38.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More
View Product

Edelbrock – Performer Series Retainer (Qty 16) (Part No.9724)

Performer Series Retainer (Qty 16)

from

$100.99
Product Features:
  • Use W/ Valve Springs Part #5822, 5882, 5896, 5872, 5867, 5812, 5857
  • Set of 16
  • 1.50 in. Outside Diameter
  • Steel Material
  • Black Oxide Finish
See More
View Product

Edelbrock – Performer-Link Adjustable True-Roller Timing Chain Set (Part No.7830)

Performer-Link Adjustable True-Roller Timing Chain Set

from

$80.99


Product Features:
  • Solid Bushing Chain Resists Stretching
  • For Use with Stock or Edelbrock Camshafts
  • Stressproof Steel Crank Gears
  • 3 Keyway Setting Points To Ensure Accurate Timing
  • True Bearing Surface Rolls with the Sprockets
See More
View Product

Edelbrock – Performer 460 Intake Manifold #2166 for Ford 429/460, Non-EGR, Satin Finish (Part No.2166)

Performer 460 Intake Manifold #2166 for Ford 429/460, Non-EGR, Satin Finish

from

$397.99
Product Features:
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 deg. Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • Accepts Late-Model Choke; Waterneck; and HEI
  • Accepts A/C And Alternator
  • Accepts Exhaust Heated Chokes
See More
View Product

Weiand – Hi-Ram; Intake Manifold (Part No.1993)

Hi-Ram; Intake Manifold

from

$636.99


Product Features:
  • Square Flange Carburetor Mounting
  • Special D-Shaped Port Runner Design
  • Large Plenum Chamber
See More
View Product

Mr. Gasket – Oil Pan Gasket (Part No.292)

Oil Pan Gasket

from

$29.99
Manufactured from high-density cork and rubber blend gasket material. Provides excellent sealing and durability. Complete with molded rubber front/rear oil pan seals where applicable. For OE replacement and high performance street.

Product Features:
  • One-piece design
  • Eliminates potential leaks
  • Prevents over tightening
  • Prevents torque loss
See More
View Product

FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1812)

PERFORMANCE OIL PAN GASKET SET

from

$27.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
  • With steel core to provide ultimate excellent blowout resistance.
  • Not intended for use in emission controlled vehicles.
See More
View Product

Edelbrock – Pushrod Set for Ford 351M/400 (Part No.9633)

Pushrod Set for Ford 351M/400

from

$188.99
Product Features:
  • 9.5 in. Length
  • 0.312 in. Diameter
  • 4130 Chromoly Steel Material
  • Black Oxide Finish
  • Made In The USA
See More
View Product

Weiand – Action +Plus; Water Pump (Part No.8209P)

Action +Plus; Water Pump

from

$300.99
Weiand’s light weight, performance aluminum mechanical Action-Plus water pumps give a weight saving of 30 percent to 50 percent over stock cast-iron pumps. These pumps feature a premium quality bearing and seal that have twice the load capacity of stock pumps. Weiand’s exclusive housing counter bore keeps the bearing form walking out. All pumps are designed with the necessary bracket bosses and water connections to fit popular street applications.

Product Features:
  • Fits Later Applications w/Water Inlet On LH Side
  • Street Performance
  • Heavy Duty Shaft w/5/8 in. Pilot
  • Six-Blade Stamped Steel
  • Anti-Cavitation Impeller
  • 100 Percent Leak Tested
  • Bearing Shaft And Seal
See More
View Product

Edelbrock – Water Pump for Ford 429/460 in Polished Finish (Part No.8876)

Water Pump for Ford 429/460 in Polished Finish

from

$526.99
Maximum cooling for street and racing engines. Internal passages are balanced for maximum flow. Impeller is larger than others for maximum pressure. Impeller vanes dramatically increase flow rates. Equal distribution to both sides of block. Only flows in one direction for optimum efficiency. In the early days of the automotive performance industry, you either ran what was available, or you fabricated something you thought met your needs. Such needs were the building blocks of this industry, and it was through the efforts of many that we have the automotive aftermarket, but it was through the work of one name in particular to which many in the industry owe a great debt, and that name is Edelbrock.

Product Features:
  • Maximum Cooling for Street and Racing Engines
  • Internal Passages Are Balanced for Maximum Flow
  • Impeller is Larger than Others For Max Pressure
  • Impeller Vanes Dramatically Increase Flow Rates
  • Equal Distribution to Both Sides of Block
  • Only Flows in One-Direction for Optimum Efficiency
See More
View Product

Edelbrock – Performer-Plus Camshaft Kit for Big-Block Ford 429/460 V8 (Part No.2167)

Performer-Plus Camshaft Kit for Big-Block Ford 429/460 V8

from

$368.99


Product Features:
  • Designed for Optimum Torque and Acceleration
  • Maximum Performance From Idle through Mid-Range
  • Matched to Edelbrock Performer Intakes
  • Includes Hydraulic Lifters and Assembly Lube
  • Major Improvement in Throttle Response and Torque
  • Use For Daily Drivers/Trucks/Vans/RVs/4x4s
  • Take The Guesswork Out Of Camshaft Selection
See More
View Product

B & M – Torque Converter, Tork Master 2000 (Part No.40427)

Torque Converter, Tork Master 2000

from

$338.99
A higher than stock stall speed as delivered by a B&M Converter will provide several advantages. The high stall converter allows the engine to launch the car at a higher RPM where more torque is available and increased strength.

Product Features:
  • New Precision Pump Drive Tube
  • Pressure Tested
  • Fully Balanced
  • Needle Thrust Bearing
  • New Thrust Washer
See More
View Product

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1028)

Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

from

$91.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
  • Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
  • Raises combustion sealing force to roughly three times that of standard head gaskets.
  • Steel wire rings for the greatest combustion seal strength.
  • Not intended for use in emission controlled vehicles.
See More
View Product

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1018)

Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

from

$49.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
  • NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
  • SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
  • STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
  • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More
View Product

Edelbrock – Sure Seat; Valve Spring (Part No.5972)

Sure Seat; Valve Spring

from

$47.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks black oxide coated. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:
  • For Use With Cast Iron Heads
  • Springs Made of Highest Quality Spring Wire
  • Springs Precision Wound To Close Tolerances
  • Use with Original Equipment Heads Only
See More
View Product

FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2948)

Engine Crankshaft Seal Kit

from

$49.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
  • Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
  • Not intended for use in emission controlled vehicles.
See More
View Product

Popular 1977 Lincoln Mark V Performance Engines Categories

Performance Intake Manifolds
Performance Intake Manifolds
Performance Engine Water Pumps
Performance Engine Water Pumps
Performance Water Outlets
Performance Water Outlets
Performance Engine Cylinder Head Gaskets
Performance Engine Cylinder Head Gaskets
Performance Engine Camshaft and Lifter Kits
Performance Engine Camshaft and Lifter Kits
Performance Engine Harmonic Balancers
Performance Engine Harmonic Balancers
Performance Engine Intake Manifold Gaskets
Performance Engine Intake Manifold Gaskets
Performance Engine Timing Sets and Components
Performance Engine Timing Sets and Components
Performance Engine Valve Springs
Performance Engine Valve Springs
Performance Engine Valve Cover Gasket Sets
Performance Engine Valve Cover Gasket Sets
Performance Engine Oil Pan Gaskets
Performance Engine Oil Pan Gaskets
Performance Engine Main Bearing Gasket Sets
Performance Engine Main Bearing Gasket Sets
Performance Engine Push Rods
Performance Engine Push Rods
Performance Torque Converters
Performance Torque Converters
Performance Engine Valve Spring Retainer
Performance Engine Valve Spring Retainer

1977 Lincoln Mark V Performance Engines

Maybe you’re in the middle of a full rebuild of that 1977 Lincoln Mark V. Maybe you just need a couple of Performance Engines. Either way, Advance Auto Parts has 28 different Performance Engines in our inventory ranging from $27.49 to $636.99. That means you can find the exact parts or products you need to keep that 1977 Lincoln Mark V running smoothly.

Performance Engines are only as good as their brand. We stock 6 different brands to make sure you have plenty of trusted parts to choose from for your 1977 Lincoln Mark V. FEL-PRO Performance, Mr. Gasket, and Edelbrock are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Performance Engines for your 1977 Lincoln Mark V, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Performance Engines to keep your 1977 Lincoln Mark V rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Performance Engines Brands To Make Your 1977 Lincoln Mark V Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1977 Lincoln Mark V demands trusted brand parts and products to keep it running. Many trusted brands of Performance Engines make up Advance Auto Parts’ inventory, and all are ready to help make your Mark V the best it can be. Be sure to browse some of our top Performance Engines brands and parts.

FAQs for 1977 Lincoln Mark V Performance Engines

What are the most purchased Performance Engines for the 1977 Lincoln Mark V?

Out of 28 Performance Engines for the 1977 Lincoln Mark V, the most popular in our inventory are:
Lower Intake Manifold Gasket Set: 5 Piece Set
from $38.99
This product is not rated
Lower Intake Manifold Gasket Set: 5 Piece Set
Performance Engine Intake Manifold Gaskets
Ultra Seal; Harmonic Balancer Bolt/Washer Kit
from $35.99
This product is not rated
Ultra Seal; Harmonic Balancer Bolt/Washer Kit
Performance Engine Harmonic Balancers
PERFORMANCE OIL PAN GASKET SET
from $27.49
This product is not rated
PERFORMANCE OIL PAN GASKET SET
Performance Engine Oil Pan Gaskets

More Popular Parts for All Makes