1977 Ford Mustang II Power Steering Parts

Essential 1977 Ford Mustang II Power Steering Parts

Driveworks – Taper Bearing Set (Part No.S-A-5)

Taper Bearing Set

from

$10.29
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Carquest Premium – Bulk – 3/8" I.D. Return Hose (J189) (sold by foot) (Part No.35001)

Bulk - 3/8" I.D. Return Hose (J189) (sold by foot)

from

$7.79
Bulk – 3/8" I.D. Return Hose (J189) (sold by foot)

Powercraft – Pump Complete Rebuild Kit (Part No.8527)

Pump Complete Rebuild Kit

from

$45.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Carquest Premium – Bulk – 3/8" ID Return Hose (CPE) (sold by each) (Part No.34995)

Bulk - 3/8" ID Return Hose (CPE) (sold by each)

from

$2.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Lares – Remanufactured Power Steering Pump (Part No.2014)

Remanufactured Power Steering Pump

from

$134.99
Power Steering Pumps are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More

Cardone – Power Steering Pump (Part No.20-232)

Power Steering Pump

from

$83.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:
  • All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
  • All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
  • Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
  • Units are supplied with 100% tested and calibrated pressure relief valves.
  • Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Rare Parts – R & P Mounting Bushing (Part No.RP15701)

R & P Mounting Bushing

from

$107.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Insulates Rack & Pinion from Frame.
  • Stabilizes Rack & Pinion
See More

Energy Suspension – Rack and Pinion Bushing Set (Part No.4.10101G)

Rack and Pinion Bushing Set

from

$26.99
Product Features:
  • Made from HYPER-Flex Polyurethane
See More

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Transmission Oil Cooler Reinstallation Kit

from

$20.79
Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.

Product Features:
  • Transmission cooler reinstallation kit
  • Contains part numbers 248001, 226201, 240250 and 4 hose clamps
  • Provides all hardware for reinstallation of Imperial transmission coolers
  • Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
See More

Factory Air – Transmission Oil Cooler Replacement Hose (Part No.53015)

Transmission Oil Cooler Replacement Hose

from

$14.49
Covered in black Hypalon
See More

Cardone – Power Steering Filter (Part No.20-0058F)

Power Steering Filter

from

$48.49
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)

Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles

from

$31.49
Product Features:
  • Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
  • Small size provides an easy fit, even in cramped systems
  • Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
  • Filter can be easily serviced, extending its functional lifespan considerably
See More

Carquest Premium – End Fitting – 90 Degree Elbow (Part No.35029)

End Fitting - 90 Degree Elbow

from

$16.79
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Powercraft – Rack Pinion Mounting Kit (Part No.8565)

Rack Pinion Mounting Kit

from

$41.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Energy Suspension – Rack and Pinion Bushing Set (Part No.4.10101R)

Rack and Pinion Bushing Set

from

$25.99
Product Features:
  • Made from HYPER-Flex Polyurethane
See More

MOOG – Rack & Pinion Bellows Kit (Part No.K8441)

Rack & Pinion Bellows Kit

from

$27.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Manufactured using premium materials
  • Engineered to provide long life and dependability
  • Construction and design validated by MOOG engineers
  • Incorporates proven design and engineering features
See More

MOOG – Rack & Pinion Bellows Kit (Part No.K9882)

Rack & Pinion Bellows Kit

from

$39.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Manufactured using premium materials
  • Engineered to provide long life and dependability
  • Construction and design validated by MOOG engineers
  • Incorporates proven design and engineering features
See More

Powercraft – Rack Pinion Seal Kit (Part No.8594)

Rack Pinion Seal Kit

from

$94.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Cardone – Rack and Pinion Assembly (Part No.22-200)

Rack and Pinion Assembly

from

$224.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.

Product Features:
  • 100% replacement of rubber sealing components.
  • Application of specialized lubricant(s) for extended life.
  • Finished in protective coating to prevent corrosion and rust.
  • Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
See More

Cardone – Rack and Pinion Assembly (Part No.23-1700)

Rack and Pinion Assembly

from

$181.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.

Product Features:
  • 100% replacement of rubber sealing components.
  • Application of specialized lubricant(s) for extended life.
  • Finished in protective coating to prevent corrosion and rust.
  • Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
See More

Powercraft – Pump Seal Kit (Part No.8526)

Pump Seal Kit

from

$13.79
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Powercraft – Pump Seal Kit (Part No.8501)

Pump Seal Kit

from

$32.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Carquest Premium – Pressure Hose Assembly (Part No.35696)

Pressure Hose Assembly

from

$41.49
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Carquest Premium – Pressure Hose Assembly (Part No.35454)

Pressure Hose Assembly

from

$131.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Carquest Premium – Pressure Hose Assembly (Part No.35399)

Pressure Hose Assembly

from

$79.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Powercraft – Rack Pinion Seal Kit (Part No.8591)

Rack Pinion Seal Kit

from

$77.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Powercraft – Upper Pinion Bearing Kit (Part No.8592)

Upper Pinion Bearing Kit

from

$33.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Powercraft – Lower Pinion Bearing Kit (Part No.8595)

Lower Pinion Bearing Kit

from

$20.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

1977 Ford Mustang II Power Steering Parts

Maybe you’re in the middle of a full rebuild of that 1977 Ford Mustang II. Maybe you just need a couple of Power Steering Parts. Either way, Advance Auto Parts has 47 different Power Steering Parts in our inventory ranging from $2.99 to $653.99. That means you can find the exact parts or products you need to keep that 1977 Ford Mustang II running smoothly.

Power Steering Parts are only as good as their brand. We stock 11 different brands to make sure you have plenty of trusted parts to choose from for your 1977 Ford Mustang II. Imperial, Driveworks, and Carquest Premium are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Power Steering Parts for your 1977 Ford Mustang II, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 3,000 reviews in this category, some of the top rated parts include Bulk – 3/8" I.D. Return Hose J189 with 4.6 stars and Power Steering Pump with 4.3 stars.

So if you’re in the market for aftermarket Power Steering Parts to keep your 1977 Ford Mustang II rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Power Steering Parts Brands To Make Your 1977 Ford Mustang II Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1977 Ford Mustang II demands trusted brand parts and products to keep it running. Many trusted brands of Power Steering Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Mustang II the best it can be. Be sure to browse some of our top Power Steering Parts brands and parts.

Popular Carquest Premium Power Steering Parts

We carry Carquest Premium parts in our stock across Power Steering Pressure Hoses and Power Steering Return Hoses categories, plus more. For a 1977 Ford Mustang II, our most popular Carquest Premium Power Steering Parts include:
Pressure Hose Assembly
from $79.99
(1)
Pressure Hose Assembly
Power Steering Pressure Hoses
Repair Fittings
from $8.49
(1)
Repair Fittings
Power Steering Return Hoses
Return Hose Assembly
from $124.99
(1)
Return Hose Assembly
Power Steering Return Hoses

Top 1977 Ford Mustang II Power Steering Parts from Imperial

Imperial products are another trusted brand when it comes to Power Steering Parts for your 1977 Ford Mustang II. Popular Imperial parts include:
Transmission Oil Cooler Hose
from $32.49
(94)
Transmission Oil Cooler Hose
Power Steering Pressure Hoses
Power Steering Oil Cooler
from $28.49
(83)
Power Steering Oil Cooler
Power Steering Coolers
Mounting Kit System
from $11.49
(27)
Mounting Kit System
Power Steering Coolers

FAQs for 1977 Ford Mustang II Power Steering Parts

What are the most purchased Power Steering Parts for the 1977 Ford Mustang II?

Out of 47 Power Steering Parts for the 1977 Ford Mustang II, the most popular in our inventory are:
Taper Bearing Set
from $10.29
(70)
Taper Bearing Set
Pinion Bearings
Bulk - 3/8" I.D. Return Hose (J189) (sold by foot)
from $7.79
This product is not rated
Bulk – 3/8" I.D. Return Hose (J189) (sold by foot)
Power Steering Reservoir Hoses
Power Steering Filter
from $31.99
(59)
Power Steering Filter
Power Steering Filters

What are the top-rated 1977 Ford Mustang II Power Steering Parts?

Top-rated Power Steering Parts for your 1977 Ford Mustang II based on customer reviews/ratings are:
Bulk - 3/8" I.D. Return Hose J189
from $46.49
(17)
Bulk – 3/8" I.D. Return Hose J189
“There is plenty of hose to get the job done”
Power Steering Pump
from $63.99
(7)
Power Steering Pump
“My power steering pump works exceptionally well and was easy to install.”
Transmission Oil Cooler Reinstallation Kit
from $20.79
(4)
Transmission Oil Cooler Reinstallation Kit
“They did not actually ahve teh kit when i got this so the erverice rep just made teh order up from bits off the shelf. The clips and hose was all the ”