1977 Chrysler New Yorker Drivetrains
More 1977 Chrysler New Yorker Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1977 Chrysler New Yorker, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1977 Chrysler New Yorker Drivetrains
Motive Gear – Ring Gear Bolt (Part No.14066913)
Yukon Gear – The Carrier Bearing Puller (Part No.56072)
from
$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
Driveworks – Oil Seal (Part No.S-8660S)
from
$5.49
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Driveworks – Ball Bearing (Part No.S-207)
from
$19.49
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Yukon Gear – Powr Lok Drive Belleville Plate For Dana 44 (Part No.16171)
National – Bearings (Part No.M86610)
from
$9.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Powertrax – Lock Right Locker (Part No.1240-LR)
from
$456.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles. Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction. Powertrax® = Extreme Traction Systems!
See More
Motive Gear – Differential Gear Install Kit (Part No.C8.25IK)
Yukon Gear – Dura Grip For Chrysler 9.25" Rear (Part No.26019)
from
$829.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.
Product Features:
See More
Product Features:
- Fits Chrysler 9.25″ rear
- 4-spring, clutch style positraction
- Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
- Fully rebuildable
- Assembled in the USA
Yukon Gear – 9.25" Pinion Gear Thrust Washer (Part No.33274)
from
$12.99
9.25″ pinion gear thrust washer.
Product Features:
See More
Product Features:
- Pinion gear thrust washer for Chrysler 9.25″ rear
Yukon Gear – C/Clip (Part No.33083)
from
$8.99
C/Clip for Chrysler 8.25″, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 8.2″, 8.5″ & 8.6″.
Product Features:
See More
Product Features:
- c-clip for Chrysler 8.25″, Ford 8.8″, GM 12 bolt car and truck and GM 8.2″, 8.5″ and 8.6″
- .150″ thick
Yukon Gear – Differential Side Bearing Screw Adjuster For 9.25" Chrysler (Part No.33256)
from
$64.99
Differential side bearing screw adjuster for 9.25″ Chrysler.
Product Features:
See More
Product Features:
- Side adjuster for Chrysler 9.25″ rear
National – Bearings (Part No.LM67048)
from
$9.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Dorman – Differential Pinion Yoke Assembly (Part No.697-541)
from
$231.99
A worn or damaged differential pinion flange can lead to driveline vibrations and fluid leaks. This part is designed to match the performance of the original equipment pinion flange on specified vehicles. It has been engineered to help restore a secure and reliable connection between the differential pinion and the drive shaft when the original flange is rusted, worn or damaged. It is made of rugged materials for reliable service and durability.
Product Features:
See More
Product Features:
- Direct replacement – this differential pinion flange is designed to match the performance of the original equipment flange on specified vehicles
- Ideal solution – engineered to help restore a secure and reliable connection between the differential pinion and the drive shaft when the original flange is worn or damaged
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Yukon Gear – 1310 Lifetime U/Joint (Part No.42003)
from
$57.99
1310 Yukon Lifetime U/joint. 1.718″ snap ring span, 1.062″ cap diameter. Inside snap ring.
See More
National – Bearings (Part No.M88010)
from
$10.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Crush Sleeve (Part No.33093)
from
$10.99
Crush Sleeve for Model 35, Chrysler 7.25″, 8.25″ Ford 8″ & GM 7.75″. Approx 0.495″ long.
Product Features:
See More
Product Features:
- Crush sleeve for AMC Model 35, Chrysler 7.25″ and 8.25″, Ford 8″ and GM 7.75″
- 0.495″ tall
USA Standard Gear – Open Spider Gear Set For Chrysler 9.25", 31 Spline (Part No.39004)
from
$209.99
Product Features:
See More
- Fits Chrysler 9.25″ rear with open differential
- Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
USA Standard Gear – Spartan Locker For Chrysler 8.25" With 27 Spline Axles, Includes Heavy-Duty Cross Pin Shaft (Part No.17037)
from
$829.99
The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.
Product Features:
See More
Product Features:
- Fits Chrysler 8.25″ with 27 spline axles
- Made from 9310 steel for added strength
- Replaces the spiders in a standard carrier case
Yukon Gear – R1559Tv Rear Axle Bearing And Seal Kit (Part No.10001)
from
$52.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1559TV axle bearing and seal kit, TorringtonBrand, 2.530″ OD, 1.620″ ID This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Includes axle bearing and seal
- Services one side
- Torrington Brand
- 2.530″ O.D.
- 1.620″ I.D.
Driveworks – Axle Repair Bearing (Part No.S-RP-6408)
from
$24.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Dorman – Spindle Washer – I.D. 23.0mm O.D. 38.0mm Thickness 3.6mm (sold by each) (Part No.618-017)
from
$3.49
This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Motive Gear – Differential Pinion Shim Kit (Part No.1100)
from
$7.49
High-quality Differential Component Shim
Product Features:
See More
Product Features:
- SHIM KIT FITS-8.25-F7.5-AMC20-GM0
Yukon Gear – Standard Open Notched Cross Pin Shaft For 9.25" Chrysler (Part No.33309)
from
$84.99
Standard Open notched cross pin shaft for 9.25″ Chrysler.
Product Features:
See More
Product Features:
- Cross pin shaft
- Fits Chrysler 9.25″
- Standard open carrier only
- Notched
Yukon Gear – Standard Open Carrier Case For Chrysler 8.25", 29 Spline, 2.56 & Up, 1997 & Up Only (Part No.20011)
from
$634.99
Product Features:
See More
- Standard open carrier case
- Does not include spider gears
- Fits Chrysler 8.25″
- 29 spline only
- ABS and non-ABS compatible
Motive Gear – Differential Carrier Gear Kit (Part No.C7.25BI)
Dorman – Standard Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In. (sold by each) (Part No.615-072)
from
$3.99
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
National – Multi Purpose Seal (Part No.7216)
from
$41.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Popular 1977 Chrysler New Yorker Drivetrains Categories
1977 Chrysler New Yorker Drivetrains
You count on your 1977 Chrysler New Yorker to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 242 Drivetrains ranging in price from $1.99 to $883.99, you’re sure to find everything you need for your 1977 Chrysler New Yorker.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 13 different brands like National, Driveworks, and Felpro. 1977 Chrysler New Yorker Drivetrains start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 636 extensive product reviews on 1977 Chrysler New Yorker Drivetrains. Some of the top-rated Drivetrains products we carry are DIFFERENTIAL GASKET with 4.4 stars and Bearings with 5.0 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1977 Chrysler New Yorker below to get started!
Top-Rated Drivetrains Brands For Your 1977 Chrysler New Yorker
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1977 Chrysler New Yorker running right for years to come. In our inventory you’ll find brands like National, Driveworks, Felpro, and even more.
Popular Yukon Gear Drivetrains
You’ll find popular Yukon Gear brand products across Differentials. All are waiting to get your 1977 Chrysler New Yorker back on the road. Some of the top-rated Yukon Gear products in these categories are:
Top-Rated Driveworks Drivetrains
If Driveworks are what you’re looking for, our inventory holds plenty. We stock Driveworks brand Drivetrains for your 1977 Chrysler New Yorker, and some of our most reviewed Driveworks parts include:
FAQs for 1977 Chrysler New Yorker Drivetrains
What are the most purchased Drivetrains for the 1977 Chrysler New Yorker?
Out of 242 Drivetrains for the 1977 Chrysler New Yorker, the most popular in our inventory are:
What are the top-rated 1977 Chrysler New Yorker Drivetrains?
Top-rated Drivetrains for your 1977 Chrysler New Yorker based on customer reviews/ratings are:
from
$6.79
(21)
DIFFERENTIAL GASKET
“I always use Fel-Pro gaskets they’re the best, but this gasket to replace the differential gasket on my son’s Jeep when I did a fluid change work and ”
