1976 Volvo 265 Exhaust Parts
More 1976 Volvo 265 Exhaust Parts Categories
If you’re looking for an original Exhaust Parts replacement for a 1976 Volvo 265, you can search through our selection below. You’ll also find aftermarket and OEM Exhaust Parts to meet your needs.
Essential 1976 Volvo 265 Exhaust Parts
Walker – SoundFX Muffler, Direct Replacement, No Fabrication Needed (Part No.18199)
from
$105.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX® direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and/or welding
- FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
Walker – SoundFX Muffler, Universal/ Fabrication Needed (Part No.17816)
from
$241.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX® universal mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
- FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
Felpro – Exhaust Pipe Flange Gasket (Part No.9712)
from
$2.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Walker – Donut Exhaust Pipe Flange Gasket: Iron, Heat Resistant, Premium Materials (Part No.31416)
from
$6.99
Complete your exhaust repair with Walker┬« gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
- HEAT RESISTANT — Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER — Use premium Walker-½ accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Tail Pipe Aluminized 20.375" (Part No.42608)
from
$45.49
Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
BRExhaust – Exhaust Clamp (Part No.250-254)
from
$19.49
Sourcing mounting parts from the manufacturer that designs and makes the exhaust system is the only way to guarantee the perfect fit. That’s why, whilst developing the exhaust system, BRExhaust also develops the installation hardware to the same standards.
Product Features:
See More
Product Features:
- whilst developing the exhaust system
- BRExhaust also develops the installation hardware to the same standards.
- Manufactured from quality materials to ensure maximum durability
- Proper fit and functionality to finish your install
- Perfect, gas-tight performance
- Exhaust accessory that facilitates a complete installation process.
- Built to OEM specifications
BRExhaust – Exhaust Clamp (Part No.250-258)
from
$26.49
Sourcing mounting parts from the manufacturer that designs and makes the exhaust system is the only way to guarantee the perfect fit. That’s why, whilst developing the exhaust system, BRExhaust also develops the installation hardware to the same standards.
Product Features:
See More
Product Features:
- whilst developing the exhaust system
- BRExhaust also develops the installation hardware to the same standards.
- Manufactured from quality materials to ensure maximum durability
- Proper fit and functionality to finish your install
- Perfect, gas-tight performance
- Exhaust accessory that facilitates a complete installation process.
- Built to OEM specifications
MagnaFlow – Standard Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.53004)
from
$97.99
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 53004 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Walker – Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed (Part No.15026)
from
$215.99
Designed to provide the required reduction in tailpipe emissions and meet EPA emissions requirements with assured compliance, Walker® Universal Catalytic Converters are available for pre-OBDII (1995 and older) vehicles.
Product Features:
See More
Product Features:
- EPA COMPLIANT — For use on pre-OBDII vehicles, 1995 and older. Not legal for sale or use in CA, CO and NY. Legal in ME on all pre-OBD vehicles only. Consult your state’s aftermarket converter regulations for details.
- NO BREAK IN REQUIRED — Ready to operate with application-specific converter shell design and mat compression, no converter break in required after installation
- DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
- OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
- BUY WITH CONFIDENCE — Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 5-year 50,000-mile/80,000-kilometer structural integrity warranty. Visit Walkerexhaust.com for details.
MagnaFlow – Standard Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.23812)
from
$161.99
Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23812. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 1976-1982 Volvo 244, 1976-1982 Volvo 245, and additional vehicles. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Walker – 3 Bolt Exhaust Pipe Flange Gasket: Fiber with Metal, Heat Resistant, Premium Materials (Part No.31305)
from
$4.49
Complete your exhaust repair with Walker┬« gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
- HEAT RESISTANT — Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER — Use premium Walker-½ accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
BRExhaust – Exhaust Hanger (Part No.255-891)
from
$5.29
BRExhaust exhaust insulator mounts are high-quality replacements for original equipment hangers¿designed to fit right the first time. They’re manufactured from premium rubber and available for a variety of car, truck, and van applications. BRExhaust insulator mounts will help to keep your components in the right position, resulting in a longer lifespan for your exhaust system.
Product Features:
See More
Product Features:
- Exhaust accessory that enables a complete installation process
- Precise fitment
- Precise fitment
- Manufactured according to strict OE standards
- Reduced Vibration
BRExhaust – Exhaust Hanger (Part No.255-873)
from
$3.29
BRExhaust exhaust insulator mounts are high-quality replacements for original equipment hangers¿designed to fit right the first time. They’re manufactured from premium rubber and available for a variety of car, truck, and van applications. BRExhaust insulator mounts will help to keep your components in the right position, resulting in a longer lifespan for your exhaust system.
Product Features:
See More
Product Features:
- Exhaust accessory that enables a complete installation process
- Precise fitment
- Precise fitment
- Manufactured according to strict OE standards
- Reduced Vibration
Walker – Exhaust 35351 Exhaust System Hanger Insulator (Part No.35351)
from
$4.99
Complete your exhaust repair with Walker® insulators. Available in a variety of styles and sizes, they’re designed to work with Walker aftermarket replacement parts for quick and easy installation.
Product Features:
See More
Product Features:
- OE DESIGN — Designed with OE-style features for easy installation and fit
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
HJS – Cat. Converter Gaske (Part No.H400184854HJS)
from
$5.14
Cat. Converter Gaske
Flowtech – Terminator; Exhaust Tips (Part No.59905FLT)
from
$85.99Product Features:
- Show Quality Chrome Platinum
- Durable Black Finish
- Can Be Welded Or Clamped
- Complete The System
- Glass-Packed Resonators
MTC – MTC Steering Rack Lock Nut (Part No.M1005328814MTC)
from
$1.97
The MTC Steering Rack Lock Nut is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Manufactured to meet or exceed OE specifications
Popular 1976 Volvo 265 Exhaust Parts Categories
1976 Volvo 265 Exhaust Parts
You count on your 1976 Volvo 265 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Exhaust Parts. With 24 Exhaust Parts ranging in price from $1.97 to $678.99, you’re sure to find everything you need for your 1976 Volvo 265.
Brands matter. If you want to shop a specific Exhaust Parts brand, we stock 11 different brands like Magnaflow, Walker, and AP Exhaust. 1976 Volvo 265 Exhaust Parts start as low as $1.97!
One of the best ways to find top quality OEM or aftermarket Exhaust Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 12 extensive product reviews on 1976 Volvo 265 Exhaust Parts. Some of the top-rated Exhaust Parts products we carry are Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed with 5.0 stars and SoundFX Muffler, Direct Replacement, No Fabrication Needed with 1.0 stars.
Did we mention you can order your Exhaust Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Exhaust Parts inventory for your 1976 Volvo 265 below to get started!
Top-Rated Exhaust Parts Brands For Your 1976 Volvo 265
Trusted Exhaust Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1976 Volvo 265 running right for years to come. In our inventory you’ll find brands like Magnaflow, Walker, AP Exhaust, and even more.
Popular MTC Exhaust Parts
You’ll find popular MTC brand products across Exhaust Manifold and Headers. All are waiting to get your 1976 Volvo 265 back on the road. Some of the top-rated MTC products in these categories are:
Top-Rated Exhaust Parts
If are what you’re looking for, our inventory holds plenty. We stock brand Exhaust Parts for your 1976 Volvo 265, and some of our most reviewed parts include:
FAQs for 1976 Volvo 265 Exhaust Parts
What are the most purchased Exhaust Parts for the 1976 Volvo 265?
Out of 24 Exhaust Parts for the 1976 Volvo 265, the most popular in our inventory are:
from
$97.99
(4)
Standard Grade Federal / EPA Compliant Universal Catalytic Converter
Catalytic Converters
from
$4.49
This product is not rated
3 Bolt Exhaust Pipe Flange Gasket: Fiber with Metal, Heat Resistant, Premium Materials
Catalytic Converter Gaskets
What are the top-rated 1976 Volvo 265 Exhaust Parts?
Top-rated Exhaust Parts for your 1976 Volvo 265 based on customer reviews/ratings are:
from
$234.99
(1)
Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed
“Nice Cat. I don’t know what else to say. It fits and it works. Two thumbs up!”
from
$105.99
(1)
SoundFX Muffler, Direct Replacement, No Fabrication Needed
“not a reliable product”
