1976 Nissan F10 Fuel and Emissions Systems
More 1976 Nissan F10 Fuel and Emissions Systems Categories
If you’re looking for an original Fuel and Emissions Systems replacement for a 1976 Nissan F10, you can search through our selection below. You’ll also find aftermarket and OEM Fuel and Emissions Systems to meet your needs.
Essential 1976 Nissan F10 Fuel and Emissions Systems
Mr. Gasket – High Performance Electric Fuel Pump – Universal Carbureted Engines (Part No.42S)
from
$56.99
Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part #12S for V8 gasoline applications, part #12D for diesel applications or part #12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!
Product Features:
See More
Product Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No DiaphraGMs Or Mechanical Parts To Wear Out
- Makes An Excellent Fuel Transfer or Booster Pump
- Hose Barbs Fit 5/16″ Fuel Hose
- Self-priming, 2 wire design
- Eliminates vapor lock and flooding
Delphi – Electric Fuel Pump: With Bracket, Hose Clamps, Nut/Bolt, Rubber Hoses, Splices, Terminal Hardware (Part No.FD0037)
from
$72.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
- Improved pump performance as a result of Delphi’s innovative design and durability
- Restores fast pressure performance and system integrity, translating to better pumping through less energy
- Part is validated, tested and matched to the right vehicle application
- Lower amperage draws less load on vehicle’s electrical system
- Always be sure to check and clean fuel tank to avoid unnecessary returns
- Always replace the fuel strainer when doing a fuel pump repair
Felpro – Exhaust Gas Recirculation (EGR) Valve Gasket (Part No.70978)
from
$1.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Validated for fit, form and function
- Unsurpassed quality you can trust
Carquest Premium – Exhaust Gas Recirculation (EGR) Valve Gasket (Part No.EVA1004)
from
$7.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Multi Purpose Relay (Part No.RAA3066)
from
$15.79
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Electric Fuel Pump Inertia Switch (Part No.SBA4426)
from
$84.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Exhaust Gas Recirculation (EGR) Valve (Part No.EGC1302)
from
$51.99
The EGR system is an emission control device designed to recirculate exhaust gas into the engines air intake system and back to the combustion chamber to control nitrogen oxides or NOx. The chemical NOx is created when oxygen and nitrogen are heated above 2,800-degree F. Exhaust gas, or gas that is displaced from the combustion chamber, contains little to no oxygen molecules. By recirculating this gas back into the combustion chamber fewer oxygen molecules are available for the combustion event which will therefore create a cooler combustion event. The EGR valve can be actuated by engine vacuum or electronically by the engine control module.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Our EGR valves are designed to match the vehicle specific exhaust gas flow rate as designed by the engine manufacturer to provide clean tail pipe emissions.
- Feedback EGR valves and pressure sensors contain a robust circuit board design which increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- Where applicable stainless-steel sleeves used over cold rolled sleeves providing smooth EGR pintle operation under all operating conditions.
Carquest Premium – Fuel Cap: 10806, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10806)
from
$8.79
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Carquest Premium – Locking Fuel Cap (Part No.10583)
from
$19.79
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Protects your fuel from theft and vandalism
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
Popular 1976 Nissan F10 Fuel and Emissions Systems Categories
1976 Nissan F10 Fuel and Emissions Systems
You count on your 1976 Nissan F10 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 9 Fuel and Emissions Systems ranging in price from $1.99 to $84.99, you’re sure to find everything you need for your 1976 Nissan F10.
Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 4 different brands like Felpro, Delphi, and Mr. Gasket. 1976 Nissan F10 Fuel and Emissions Systems start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 55 extensive product reviews on 1976 Nissan F10 Fuel and Emissions Systems.
Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 1976 Nissan F10 below to get started!
Top-Rated Fuel and Emissions Systems Brands For Your 1976 Nissan F10
Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1976 Nissan F10 running right for years to come. In our inventory you’ll find brands like Felpro, Delphi, Mr. Gasket, and even more.
Popular Carquest Premium Fuel and Emissions Systems
You’ll find popular Carquest Premium brand products across Gas Caps. All are waiting to get your 1976 Nissan F10 back on the road. Some of the top-rated Carquest Premium products in these categories are:
Top-Rated Fuel and Emissions Systems
If are what you’re looking for, our inventory holds plenty. We stock brand Fuel and Emissions Systems for your 1976 Nissan F10, and some of our most reviewed parts include:
FAQs for 1976 Nissan F10 Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the 1976 Nissan F10?
Out of 9 Fuel and Emissions Systems for the 1976 Nissan F10, the most popular in our inventory are:
