1976 GMC G35 Differentials

Essential 1976 GMC G35 Differentials

Yukon Gear – Pinion Install Kit For Dana 70-U Differential (Part No.13035)

Pinion Install Kit For Dana 70-U Differential

from

$349.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Dana Spicer 70U
  • Included are pinion bearings and races, pinion seal, pinion nut, complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – Dana 60 & Dana 70 Power Lok Cross Pin Shaft (Two Needed) (Part No.33315)

Dana 60 & Dana 70 Power Lok Cross Pin Shaft (Two Needed)

from

$156.99
Dana 60 & Dana 70 Power Lok cross pin shaft (TWO needed).

Product Features:
  • Cross pin shaft
  • Fits Dana Spicer 60 and 70
  • Powr Lok positraction only
See More

Felpro – DIFFERENTIAL GASKET (Part No.RDS 6095-1)

DIFFERENTIAL GASKET

from

$8.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Driveworks – Tapered Roller Bearing (Part No.S-HM-88542)

Tapered Roller Bearing

from

$16.49
Product Features:
  • Brand may vary by location
See More

USA Standard Gear – Replacement Standard Spider Gear Set For Dana 70, 35 Spline (Part No.39011)

Replacement Standard Spider Gear Set For Dana 70, 35 Spline

from

$249.99
Product Features:
  • Spider gear kit
  • Fit Dana Spicer 70 and 80 open differential with 35 spline axles
  • Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

Yukon Gear – Grizzly Locker For Dana 60, 4.56 & Up, 30 Spline (Part No.28004)

Grizzly Locker For Dana 60, 4.56 & Up, 30 Spline

from

$1204.99
The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker is a mechanical locking differential. It features a forged case and 8620 internals for maximum strength. It’s patented design reduces common locker failures. All units assembled in the USA! All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts and associated labor, up to $2,000! This is a narrow case locker. If you have a wide housing, please order two DS 42563 with your locker. This locker is ABS compatible.

Product Features:
  • Fits Dana Spicer 60 with 30 spline axles
  • 4.56 and up ratio only
  • Patented internal design reduces common locker failures
  • 8620 internals for added strength
  • Assembled in the USA
See More

Yukon Gear – Replacement Carrier Shim Kit For Dana 60, 70, 70HD, 70U & 80 (Part No.55011)

Replacement Carrier Shim Kit For Dana 60, 70, 70HD, 70U & 80

from

$13.99
Product Features:
  • Carrier shim kit for Dana Spicer 60, 70, 70HD, 70U and 80
See More

Yukon Gear – Dana 60 & Dana 70 Power Lok Case Bolt (Part No.33236)

Dana 60 & Dana 70 Power Lok Case Bolt

from

$7.99
Dana 60 & Dana 70 Power Lok case bolt.

Product Features:
  • Power Lok case bolt for Dana Spicer 60 and 70
  • 7/16 x 14 thread
  • 3.5″ long
  • 9/16″ hex head
See More

Yukon Gear – Bearing Race Driver (Part No.56013)

Bearing Race Driver

from

$215.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits HM807010 race
  • All steel construction
See More

Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)

Dana 60, Dana 70 & Dana 80 Cover Bolt

from

$5.99
3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.

Product Features:
  • Cover bolt for Dana Spicer 60, 70 and 80
  • 3/8″
See More

Motive Gear – Differential Crush Sleeve (Part No.3977355)

Differential Crush Sleeve

from

$11.99


Product Features:
  • CRUSH SLEEVE 14 BOLT 10.5 3116
See More

Yukon Gear – Zip Locker For Dana 60 With 30 Spline Axles, 4.56 & Up (Part No.34023)

Zip Locker For Dana 60 With 30 Spline Axles, 4.56 & Up

from

$1487.99
The Yukon Zip Locker is the latest in on-demand traction. Its air-operated design allows you to switch from an open differential to 100% lockup when you need it, giving you the ultimate in driver selectability. The Yukon Zip locker is an air operated locker that provides selectable traction for off road or street use. This unit features 4320 Chrome Moly internals for added strength. Assembled in the USA! compressor sold separately. All Zip Lockers are backed by the best warranty in the business! All Zip Lockers are backed by the best warranty in the business! All Zip Lockers come with a six (6) year warranty, including any collaterally damaged parts and associated labor, up to $2,000, for the first two (2) years. This is a narrow case locker. If you have a wide housing, please order two DS 42563 with your locker. This locker is ABS compatible.

Product Features:
  • Fits Dana Spicer 60 with 30 spline axles
  • 4.56 and up ratio only
  • Forged case and 8620 internals for added strength
  • Works with a variety of air delivery systems
  • Assembled in the USA
See More

Yukon Gear – High Performance Replacement Ring & Pinion Gear Set For Dana 60 In A 4.56 Ratio, Thick (Part No.24606)

High Performance Replacement Ring & Pinion Gear Set For Dana 60 In A 4.56 Ratio, Thick

from

$489.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:
  • Fits standard rotation Dana Spicer 60
  • 9.75″ ring gear diameter
  • 29 spline pinion
  • 12 ring gear bolts
  • 4.56 ratio
  • Thick gear for 4.11 and down carrier
See More

National – Multi Purpose Seal (Part No.9316)

Multi Purpose Seal

from

$17.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

National – Bearings (Part No.HM807010)

Bearings

from

$27.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Minor Install Kit For Dana 60 And 61 Differential (Part No.12026)

Minor Install Kit For Dana 60 And 61 Differential

from

$151.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

Product Features:
  • Fits Dana Spicer 60 rear
  • Included are a pinion seal, crush sleeve , complete shim kit, marking compound and brush.
See More

Yukon Gear – Dana 60 & Dana 61 Tracloc Clutch Set (Part No.16156)

Dana 60 & Dana 61 Tracloc Clutch Set

from

$269.99
Dana 60 & Dana 61 TracLoc clutch set.

Product Features:
  • Clutch kit
  • Fit Dana Spicer 60 Trac Loc positraction
See More

Powertrax – Grip PRO Traction System (Part No.GT436035)

Grip PRO Traction System

from

$596.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More

Richmond Gear – RngPnnInstlKt (Part No.83-1034-B)

RngPnnInstlKt

from

$59.99
RngPnnInstlKt

Yukon Gear – Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng (Part No.33327)

Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng

from

$7.99
Dana 50 Dana 60 Dana 70 & Dana 80 roll PIN, 0.225″ DIA, for X/P shaft, 1.87″ LNG.

Product Features:
  • Roll pin for Dana Spicer 50, 60, 70, 70U, 70HD and 80
  • 0.225″ diameter
  • 1.870″ long
See More

FAG US – TAPERED ROLLER BEARI (Part No.KT45)

TAPERED ROLLER BEARI

from

$24.29
TAPERED ROLLER BEARI

Yukon Gear – Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement (Part No.33164)

Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement

from

$3.99
Product Features:
  • Pinion nut washer for Chrysler 7.25″, 8.25″, 8.75″ with 29 spline pinion, Jeep JK rear, Dana Spicer 60, 70, 70U and 70HD and 2007-2010 Ford 10.5″
See More

Motive Gear – Differential Master Bearing Kit – Timken (Part No.R70HRMKT)

Differential Master Bearing Kit - Timken

from

$217.99


Product Features:
  • MASTER KIT DANA 70 HD
See More

Yukon Gear – Replacement Trail Repair Kit For Dana 60 With 1310 Size U/Joint And U-Bolts (Part No.32282)

Replacement Trail Repair Kit For Dana 60 With 1310 Size U/Joint And U-Bolts

from

$251.99
Yukon replacement trail repair kit for Dana 60 with 1310 size U/joint and u-bolts. This kit comes with a yoke, U/joint, pinion seal, U/bolt or strap kit, pinion nut, and pinion nut washer (if applicable).

Product Features:
  • Fits Dana Spicer 60 and 70
  • 1310 u-joint size
  • Kit includes yoke, U-joint, pinion seal, pinion nut and washer, U-bolts and threadlocker
See More

Yukon Gear – Side Gear Thrust Washer For Dana 60, 70 & 80 (Part No.33532)

Side Gear Thrust Washer For Dana 60, 70 & 80

from

$4.99
Product Features:
  • Side gear thrust washer for Dana Spicer 60, 70, 70U, 70HD and 80
  • Fits standard open differentials only
See More

Yukon Gear – Carrier Installation Kit For Dana 60 Differential (Part No.57005)

Carrier Installation Kit For Dana 60 Differential

from

$194.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Dana 60 differential. This kit contains carrier bearings, races and shims.

Product Features:
  • Fits Dana Spicer 60
  • Includes carrier bearings and races and carrier shim kit
See More

Motive Gear – Differential Pinion Shim Kit (Part No.GM14SK)

Differential Pinion Shim Kit

from

$22.99


Product Features:
  • KIT SHIM GM 10.5 14 BLT
See More

Yukon Gear – Seal Housing For Dana 60, Zip Locker, With O-Rings (Part No.34039)

Seal Housing For Dana 60, Zip Locker, With O-Rings

from

$79.99
Seal housing for Dana 60, Zip locker, with o-rings.

Product Features:
  • Seal housing for Dana Spicer 60
  • Includes o-rings
See More

1976 GMC G35 Differentials

Maybe you’re in the middle of a full rebuild of that 1976 GMC G35. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 248 different Differentials in our inventory ranging from $1.89 to $1,566.99. That means you can find the exact parts or products you need to keep that 1976 GMC G35 running smoothly.

Differentials are only as good as their brand. We stock 15 different brands to make sure you have plenty of trusted parts to choose from for your 1976 GMC G35. Valvoline, Yukon Gear, and National are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1976 GMC G35, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 336 reviews in this category, some of the top rated parts include DIFFERENTIAL GASKET with 3.0 stars and Differential Cover Gasket with 5.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1976 GMC G35 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1976 GMC G35 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1976 GMC G35 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your G35 the best it can be. Be sure to browse some of our top Differentials brands and parts.

FAQs for 1976 GMC G35 Differentials

What are the most purchased Differentials for the 1976 GMC G35?

Out of 248 Differentials for the 1976 GMC G35, the most popular in our inventory are:
3 Qt - 80W90 Conventional Gear Oil With Posi Additive
from $57.99
This product is not rated
3 Qt – 80W90 Conventional Gear Oil With Posi Additive
Differential Oil
Bearings
from $22.99
(3)
Bearings
Differential Bearings
Dana 60, Dana 70 & Dana 80 Cover Bolt
from $5.99
This product is not rated
Dana 60, Dana 70 & Dana 80 Cover Bolt
Differential Cover Bolts

What are the top-rated 1976 GMC G35 Differentials?

Top-rated Differentials for your 1976 GMC G35 based on customer reviews/ratings are:
DIFFERENTIAL GASKET
from $8.29
(4)
DIFFERENTIAL GASKET
“Great Product”
Differential Cover Gasket
from $15.99
(1)
Differential Cover Gasket
“OEM only uses silicone , the gasket set with a thin layer of silicone is a much better sealant method”
Differential Ring and Pinion
from $245.99
(1)
Differential Ring and Pinion
“You get a good set of gears for a good price. Found same set other places for a lot more money. Would recommend this .”