1975 GMC G35 Differentials

Essential 1975 GMC G35 Differentials

Motive Gear – Ring Gear Bolt (Part No.331421)

Ring Gear Bolt

from

$9.99
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application.
See More

Pro-King – Differential Crush Sleeve (Part No.744A034)

Differential Crush Sleeve

from

$4.59
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Bearing Race Driver (Part No.56011)

Bearing Race Driver

from

$215.99
Bearing race driver for Dana 60 front, Dana 70U rear, Chrysler 8.75″ with 42 housing, and ’88 and older GM 14T. No return.

Product Features:
  • Bearing race driver
  • Fits HM803110 race
  • All steel construction
See More

Yukon Gear – Hardcore Diff Cover For Dana 50, Dana 60 & Dana 70 (Part No.32352)

Hardcore Diff Cover For Dana 50, Dana 60 & Dana 70

from

$288.99
Product Features:
  • Nodular iron for added strength
  • Thick design
  • Durable powder coat finish
  • Magnetic drain plug
  • Made in USA
  • High strength stainless steel fasteners
See More

Yukon Gear – Dana 60 & Dana 61 Tracloc Clutch Set (Part No.16156)

Dana 60 & Dana 61 Tracloc Clutch Set

from

$269.99
Dana 60 & Dana 61 TracLoc clutch set.

Product Features:
  • Clutch kit
  • Fit Dana Spicer 60 Trac Loc positraction
See More

USA Standard Gear – Master Overhaul Kit Dana 60 and 61 Rear Differential (Part No.37021)

Master Overhaul Kit Dana 60 and 61 Rear Differential

from

$253.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits Dana Spicer 60 rear
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, oil baffles and slingers, thread locker, marking compound with brush and gasket.
See More

Yukon Gear – Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70 (Part No.23007)

Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70

from

$13.99
Product Features:
  • Cover gasket
  • Fits Dana Spicer 60, 70, 70U and 70HD
See More

Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)

Dana 60, Dana 70 & Dana 80 Cover Bolt

from

$5.99
3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.

Product Features:
  • Cover bolt for Dana Spicer 60, 70 and 80
  • 3/8″
See More

Yukon Gear – Zip Locker Install Kit (Part No.34026)

Zip Locker Install Kit

from

$249.99
Product Features:
  • Installation kit
  • Includes o-ring for bulkhead fitting, bulkhead fitting, outer fitting, switch, front and rear switch cover, solenoid, zip ties and 20′ air line
See More

FAG US – CUP (Part No.LM501310)

CUP

from

$9.99
CUP

USA Standard Gear – Replacement Standard Spider Gear Set For Dana 70, 35 Spline (Part No.39011)

Replacement Standard Spider Gear Set For Dana 70, 35 Spline

from

$249.99
Product Features:
  • Spider gear kit
  • Fit Dana Spicer 70 and 80 open differential with 35 spline axles
  • Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

National – Bearings (Part No.HM803146)

Bearings

from

$47.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Master Overhaul Kit For Dana 70-U Differential (Part No.14040)

Master Overhaul Kit For Dana 70-U Differential

from

$454.99
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.

Product Features:
  • Fits Dana Spicer 70U
  • Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, oil baffles and slingers , thread locker, marking compound with brush, and gasket.
See More

Yukon Gear – Replacement Pinion Preload Shims For Dana 60, Dana 61 & Dana 70-U (Part No.55015)

Replacement Pinion Preload Shims For Dana 60, Dana 61 & Dana 70-U

from

$19.99
Product Features:
  • Pinion preload shims for Dana Spicer 60 and 70U
See More

Yukon Gear – Dana 60 Pinion Gear Thrust Washer, Standard Open & Tracloc (Also 8.75" Chrysler Std) Dana 70 2Pc (Part No.33287)

Dana 60 Pinion Gear Thrust Washer, Standard Open & Tracloc (Also 8.75" Chrysler Std) Dana 70 2Pc

from

$5.99
Dana 60 pinion gear Thrust washer, standard Open & TracLoc (also 8.75″ Chrysler STD) Dana 70 2PC.

Product Features:
  • Pinion gear thrust washer for Dana Spicer 60
  • Fits standard open and Trac Loc applications
See More

Yukon Gear – Differential (Part No.26037)

Differential

from

$854.99
Differential

Yukon Gear – Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD (Part No.30228)

Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD

from

$37.99
Replacement redi-sleeve yoke saver for 8.75″ c, 9.25″ c, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD .Yukon Mighty seal.

Product Features:
  • Redi-Sleeve yoke saver
  • Fits Chrysler 8.75″ and 9.25″ rear, Dana Spicer 60, 70, 70U and 70HD
See More

Yukon Gear – High Performance Replacement Ring & Pinion Gear Set For Dana 60 In A 6.17 Ratio (Part No.24307)

High Performance Replacement Ring & Pinion Gear Set For Dana 60 In A 6.17 Ratio

from

$541.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:
  • Fits standard rotation Dana Spicer 60
  • 9.75″ ring gear diameter
  • 29 spline pinion
  • 12 ring gear bolts
  • 6.17 ratio
See More

Yukon Gear – O-Ring For Dana 60 Zip Locker Seal Housing (Part No.34006)

O-Ring For Dana 60 Zip Locker Seal Housing

from

$11.29
Product Features:
  • O-ring for seal housing
  • Fits Dana Spicer 60
See More

Yukon Gear – Pinion Install Kit For Dana 70-U Differential (Part No.13035)

Pinion Install Kit For Dana 70-U Differential

from

$349.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Dana Spicer 70U
  • Included are pinion bearings and races, pinion seal, pinion nut, complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement (Part No.33164)

Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement

from

$3.99
Product Features:
  • Pinion nut washer for Chrysler 7.25″, 8.25″, 8.75″ with 29 spline pinion, Jeep JK rear, Dana Spicer 60, 70, 70U and 70HD and 2007-2010 Ford 10.5″
See More

Pro-King – Rear Axle Shaft Kit (Part No.AXK-237)

Rear Axle Shaft Kit

from

$233.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket. All products are designed to meet or exceed OE quality, form, fit and funtion.

Product Features:
  • High strength steel
  • Dual heat treating process
See More

Motive Gear – Differential Gear Install Kit (Part No.GM10.5IK)

Differential Gear Install Kit

from

$54.99


Product Features:
  • MINI INST KIT GM 14BLT 10.5″ 4.10DN 1972-88
See More

Felpro – DIFFERENTIAL GASKET (Part No.RDS 6095-1)

DIFFERENTIAL GASKET

from

$8.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Felpro – Differential Cover Gasket (Part No.RDS 6014)

Differential Cover Gasket

from

$15.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Motive Gear – Pinion Seal (Part No.26064030)

Pinion Seal

from

$23.99
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
See More

Yukon Gear – Dana 60 & Dana 70 Power Lok Cross Pin Shaft (Two Needed) (Part No.33315)

Dana 60 & Dana 70 Power Lok Cross Pin Shaft (Two Needed)

from

$156.99
Dana 60 & Dana 70 Power Lok cross pin shaft (TWO needed).

Product Features:
  • Cross pin shaft
  • Fits Dana Spicer 60 and 70
  • Powr Lok positraction only
See More

Yukon Gear – Differential Carrier (Part No.20040)

Differential Carrier

from

$409.99
Differential Carrier

1975 GMC G35 Differentials

Maybe you’re in the middle of a full rebuild of that 1975 GMC G35. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 248 different Differentials in our inventory ranging from $1.89 to $1,566.99. That means you can find the exact parts or products you need to keep that 1975 GMC G35 running smoothly.

Differentials are only as good as their brand. We stock 15 different brands to make sure you have plenty of trusted parts to choose from for your 1975 GMC G35. Valvoline, Yukon Gear, and National are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1975 GMC G35, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 196 reviews in this category, some of the top rated parts include DIFFERENTIAL GASKET with 3.0 stars and Differential Cover Gasket with 5.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1975 GMC G35 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1975 GMC G35 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1975 GMC G35 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your G35 the best it can be. Be sure to browse some of our top Differentials brands and parts.

FAQs for 1975 GMC G35 Differentials

What are the most purchased Differentials for the 1975 GMC G35?

Out of 248 Differentials for the 1975 GMC G35, the most popular in our inventory are:
3 Qt - 80W90 Conventional Gear Oil With Posi Additive
from $57.99
This product is not rated
3 Qt – 80W90 Conventional Gear Oil With Posi Additive
Differential Oil
Bearings
from $22.99
(3)
Bearings
Differential Bearings
Dana 60, Dana 70 & Dana 80 Cover Bolt
from $5.99
This product is not rated
Dana 60, Dana 70 & Dana 80 Cover Bolt
Differential Cover Bolts

What are the top-rated 1975 GMC G35 Differentials?

Top-rated Differentials for your 1975 GMC G35 based on customer reviews/ratings are:
DIFFERENTIAL GASKET
from $8.29
(4)
DIFFERENTIAL GASKET
“Great Product”
Differential Cover Gasket
from $15.99
(1)
Differential Cover Gasket
“OEM only uses silicone , the gasket set with a thin layer of silicone is a much better sealant method”
Differential Ring and Pinion
from $245.99
(1)
Differential Ring and Pinion
“You get a good set of gears for a good price. Found same set other places for a lot more money. Would recommend this .”