1976 Ford Mustang II Clutch Systems
More 1976 Ford Mustang II Clutch Systems Categories
If you’re looking for an original Clutch Systems replacement for a 1976 Ford Mustang II, you can search through our selection below. You’ll also find aftermarket and OEM Clutch Systems to meet your needs.
Essential 1976 Ford Mustang II Clutch Systems
Hays – Flywheels (Part No.12-535)
from
$499.99
Hays aluminum flywheels are manufactured from certified billet material that will not break up under the stress of high RPM and severe punishment of racing. Features replaceable steel surface insert. Precision balanced to either neutral (internal) or Detroit (external) specifications. Meets SFI specification 1.1 for racing.
Product Features:
See More
Product Features:
- Certified Billet Material
- Borg and Beck Clutch Pattern
- Long-Style Clutch Pattern
- Ring Gear Securely Mounted To Prevent Spinning
ATP – Automatic Transmission Flex Plate (Part No.Z-108)
from
$43.99
Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability
Product Features:
See More
Product Features:
- Balanced to factory specs
- Fit and function like the original parts
- Restores normal operation
Lakewood – Power Train (Part No.RM-950)
from
$364.99
Power Train
ATP – Manual Transmission Flywheel Ring Gear (Part No.ZA-578)
from
$34.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- Eliminates grinding from damaged teeth
- Increases starter drive life
ATP – ATP Manual Transmission Flywheel Ring Gear (Part No.ZA-542)
from
$50.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over And start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit And function just like the original part to ensure durability And long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- Eliminates grinding from damaged teeth
- Increases starter drive life
ATP – Manual Transmission Flywheel Ring Gear (Part No.ZA-503)
from
$32.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- Eliminates grinding from damaged teeth
- Increases starter drive life
ATP – Clutch Cable (Part No.Y-140)
from
$66.99
Clutch Cable
Driveworks – Clutch Release Bearing (Part No.S-614014)
from
$15.49
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Multi Purpose Bearing (Part No.614014)
from
$47.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Design improvements include extended life and quiet operation
- Industry leading coverage
- Professional technicians know they can depend on National
ATP – FLYWHEEL SHIM (Part No.FS-5)
from
$25.99
FLYWHEEL SHIM
ATP – FLYWHEEL SHIM (Part No.FS-1)
from
$25.99
FLYWHEEL SHIM
ATP – FLYWHEEL SHIM (Part No.FS-4)
from
$26.99
FLYWHEEL SHIM
LuK – Clutch Kit: 8 1/2" Disc Diameter, 1 1/16" Input Shaft Diameter, 23 Tooth Spline (Part No.07-003)
from
$129.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Application matched for OE form, fit, and function
- Manufactured with high-quality materials, using cutting edge technology and processes
- Stock photo – Actual parts and materials may vary.
LuK – Clutch Kit: 8 1/2" Disc Diameter, 1 1/16" Input Shaft Diameter, 10 Tooth Spline (Part No.07-030)
from
$161.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Application matched for OE form, fit, and function
- Manufactured with high-quality materials, using cutting edge technology and processes
- Stock photo – Actual parts and materials may vary.
Dorman – Clutch Pilot Bearing .596 In. x .829 In. Type E, Length .586 In. (sold by each) (Part No.690-044)
from
$3.99
This clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles
- Ideal solution – this bearing is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Driveworks – Clutch Pilot Bearing, Needle Bearing (Part No.S-FC65662)
National – Bearings (Part No.FC-65354)
from
$8.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Available in both caged design and full complement
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.F-33126)
from
$15.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Available in both caged design and full complement
- Industry leading coverage
- Professional technicians know they can depend on National
Lakewood – Bellhousing: Ford 289-351 (Part No.15200)
from
$999.99
Hydroformed from premium quality steel. Uniform thickness for superior strength. Mig-welded threaded inserts. Stress relief in a stronger and safer bell housing. Precision machined assures proper bolt hole. Includes block plate and hardware. Approved by major racing sanctioning bodies. Meets SFI 6.1 specifications.
Product Features:
See More
Product Features:
- Hydroformed From Premium Quality Steel
- Uniform Thickness For Superior Strength
- Mig-Welded Threaded Inserts
- Stress Relief In A Stronger/Safer Bellhousing
- Precision Machined Assures Proper Bolt Hole
- Includes Block Plate And Hardware
- Approved By Major Racing Sanctioning Bodies
- Meets SFI 6.1 Specifications
Dorman – Help – Flywheel Bolts (Part No.14557)
from
$10.49
This clutch flywheel bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch flywheel bolt matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Flywheel Bolts – Thread Size 7/16-20; Thread Length 0.900 In. (sold by each) (Part No.678-154)
from
$3.99
This clutch flywheel bolt is designed to match the fit & function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch flywheel bolt matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
- Thread Size: 7/16-20
- Tread Length: 0.900 in.
- SAE
- PLEASE NOTE: Item priced and sold by each. See store for details.
Dorman – Help – Flywheel Bolts Thread 7/16-20, Length .900 In. (22.86mm), Head Thickness .190 In (Part No.74070)
from
$12.99
This clutch flywheel bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch flywheel bolt matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Popular 1976 Ford Mustang II Clutch Systems Categories
1976 Ford Mustang II Clutch Systems
You count on your 1976 Ford Mustang II to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Clutch Systems. With 27 Clutch Systems ranging in price from $3.99 to $999.99, you’re sure to find everything you need for your 1976 Ford Mustang II.
Brands matter. If you want to shop a specific Clutch Systems brand, we stock 7 different brands like Dorman, National, and Driveworks. 1976 Ford Mustang II Clutch Systems start as low as $3.99!
One of the best ways to find top quality OEM or aftermarket Clutch Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 182 extensive product reviews on 1976 Ford Mustang II Clutch Systems. Some of the top-rated Clutch Systems products we carry are Flywheel Bolts Thread 7/16-20, Length .900 In. (22.86mm), Head Thickness .190 In with 3.0 stars and Clutch Pilot Bearing, Needle Bearing with 5.0 stars.
Did we mention you can order your Clutch Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Clutch Systems inventory for your 1976 Ford Mustang II below to get started!
Top-Rated Clutch Systems Brands For Your 1976 Ford Mustang II
Trusted Clutch Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1976 Ford Mustang II running right for years to come. In our inventory you’ll find brands like Dorman, National, Driveworks, and even more.
Popular ATP Clutch Systems
You’ll find popular ATP brand products across Flywheels. All are waiting to get your 1976 Ford Mustang II back on the road. Some of the top-rated ATP products in these categories are:
Top-Rated National Clutch Systems
If National are what you’re looking for, our inventory holds plenty. We stock National brand Clutch Systems for your 1976 Ford Mustang II, and some of our most reviewed National parts include:
FAQs for 1976 Ford Mustang II Clutch Systems
What are the most purchased Clutch Systems for the 1976 Ford Mustang II?
Out of 27 Clutch Systems for the 1976 Ford Mustang II, the most popular in our inventory are:
What are the top-rated 1976 Ford Mustang II Clutch Systems?
Top-rated Clutch Systems for your 1976 Ford Mustang II based on customer reviews/ratings are:
from
$12.99
(2)
Flywheel Bolts Thread 7/16-20, Length .900 In. (22.86mm), Head Thickness .190 In
“Right part”
