1976 Dodge W100 Differentials

Essential 1976 Dodge W100 Differentials

Yukon Gear – Power Lok Positraction Internals For Dana 44 And Chysler 8.75" With 30 Spline Axles (Part No.16005)

Power Lok Positraction Internals For Dana 44 And Chysler 8.75" With 30 Spline Axles

from

$503.99
Yukon Power Lok positraction replacement internals for Dana 44 and Chysler 8.75″ with 30 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit does not include clutches. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Spider gear kit
  • Fit Dana Spicer 44 and Chrysler 8.75″ Powr Lok positraction
  • Includes two side gears, four pinion gears, cross pin shafts and side gear thrust washers.
See More

Yukon Gear – Positraction Spiders For Chrysler9.25" Dura Grip Posi, 31 Spline, No Clutches Included (Part No.16180)

Positraction Spiders For Chrysler9.25" Dura Grip Posi, 31 Spline, No Clutches Included

from

$389.99
Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Spider gear kit
  • Fits Chrysler 9.25″
  • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
  • Fits Yukon Dura Grip
See More

Felpro – Axle Housing Cover Gasket (Part No.RDS 6629)

Axle Housing Cover Gasket

from

$6.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

USA Standard Gear – Master Overhaul Kit for the Dana 44 Differential with 30 Spline (Part No.37008)

Master Overhaul Kit for the Dana 44 Differential with 30 Spline

from

$289.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits standard rotation Dana Spicer 44 front
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, axle seals, complete shim kit, ring gear bolts, pinion nut, oil baffles and slingers, thread locker, marking compound with brush and gasket.
See More

Pro-King – Differential Internal Nest Kit (Part No.723A717)

Differential Internal Nest Kit

from

$227.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Chrysler 9.25" Dura Grip Case, Bare (Part No.20015)

Chrysler 9.25" Dura Grip Case, Bare

from

$399.99
Product Features:
  • Dura Grip positraction carrier case
  • Does not include spider gears
  • Fits Chrysler 9.25″ rear
See More

National – Bearings (Part No.02820)

Bearings

from

$9.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD (Part No.30228)

Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD

from

$37.99
Replacement redi-sleeve yoke saver for 8.75″ c, 9.25″ c, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD .Yukon Mighty seal.

Product Features:
  • Redi-Sleeve yoke saver
  • Fits Chrysler 8.75″ and 9.25″ rear, Dana Spicer 60, 70, 70U and 70HD
See More

Yukon Gear – Replacement Oil Baffle For Dana 44 (Part No.33000)

Replacement Oil Baffle For Dana 44

from

$6.99
Product Features:
  • Oil baffle for Dana Spicer 44
See More

FAG US – CUP (Part No.LM501310)

CUP

from

$9.99
CUP

USA Standard Gear – Spartan Locker for Dana 44 Differential with 30 Spline Axles, Includes Heavy-duty Cross Pin Shaft (Part No.17001)

Spartan Locker for Dana 44 Differential with 30 Spline Axles, Includes Heavy-duty Cross Pin Shaft

from

$669.99
The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.

Product Features:
  • Fits Dana Spicer 44 with 30 spline axles
  • Made from 9310 steel for added strength
  • Replaces the spiders in a standard carrier case
See More

Yukon Gear – Positraction Clutch Guide (Part No.33352)

Positraction Clutch Guide

from

$8.99
Positraction clutch guide.

Product Features:
  • Clutch guide for Chrysler 9.25″, Dana Spicer 44, Dana Spicer 50, Ford 8.8″, GM 12 bolt passenger car, GM 8.2″, 8.5″ and 8.6″, 1963-1979 Corvette and Nissan Titan
  • Compatible with Dura Grip positractions only
See More

Yukon Gear – Round Companion Flange For Jeep Liberty Rear, Chrysler 8.25" (Part No.41120)

Round Companion Flange For Jeep Liberty Rear, Chrysler 8.25"

from

$289.99
Yukon round companion flange for Jeep Liberty rear, Chrysler 8.25″. Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Chrysler 8.25″
  • 27 spline
  • Round companion flange
See More

Yukon Gear – 8.25" Chrysler Pinion Gear Thrust Washer (Part No.33273)

8.25" Chrysler Pinion Gear Thrust Washer

from

$26.99
8.25″ Chrysler pinion gear thrust washer.

Product Features:
  • Pinion gear thrust washer
  • Fits Chrysler 8.25″
See More

Yukon Gear – Aluminum Girdle Replacement Cover For Dana 44 Ta HD (Part No.32110)

Aluminum Girdle Replacement Cover For Dana 44 Ta HD

from

$359.99
Aluminum Girdle replacement cover for Dana 44 TA HD.

Product Features:
  • Fits standard rotation Dana Spicer 44
  • Aluminum girdle cover
See More

Yukon Gear – Dana 44 Complete Shim Kit Replacement (Part No.55021)

Dana 44 Complete Shim Kit Replacement

from

$51.99
Product Features:
  • Complete shim kit for Dana Spicer 44
See More

Yukon Gear – Dura Grip For Dana 44, 30 Spline, 3.92 & Up (Part No.26027)

Dura Grip For Dana 44, 30 Spline, 3.92 & Up

from

$809.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.

Product Features:
  • Fits Dana Spicer 44 with 30 spline axles
  • 3.92 ratio and up only
  • 4-spring, clutch style positraction
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

Yukon Gear – Seal Housing For Dana 44, Zip Locker, With O-Rings (Part No.34013)

Seal Housing For Dana 44, Zip Locker, With O-Rings

from

$83.99
Product Features:
  • Seal housing for Dana Spicer 44
  • Includes o-rings
See More

Pro-King – Differential Ring Gear Bolt (Part No.742G935)

Differential Ring Gear Bolt

from

$1.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

National – Bearings (Part No.M804049)

Bearings

from

$38.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Bearing Race Driver Set, 21 Piece (Part No.56030)

Bearing Race Driver Set, 21 Piece

from

$1566.99
21 Piece bearing race driver set. (Box wt: 140lbs) No return.

Product Features:
  • Bearing race driver set
  • 21 pieces
  • All steel construction
See More

Yukon Gear – Carrier Installation Kit For ’76 & Up Chrysler 8.25" Rear (Part No.57014)

Carrier Installation Kit For '76 & Up Chrysler 8.25" Rear

from

$78.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for ’76 & up Chrysler 8.25″ rear.

Product Features:
  • Fits 1976 and up Chrysler 8.25″
  • Includes carrier bearings and races
See More

Yukon Gear – Pinion Install Kit For ’70-’75 Chrysler 8.25" Differential (Part No.13003)

Pinion Install Kit For '70-'75 Chrysler 8.25" Differential

from

$175.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits 1975 and down Chrysler 8.25″
  • Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

Motive Gear – Differential Ring and Pinion (Part No.D44-513GX)

Differential Ring and Pinion

from

$244.99


Product Features:
  • DANA-44 R/P 5.13 RUBICON – THICK HAS BOTH 7/16 & 3/8″ BOLT PATTERN
See More

Yukon Gear – Zip Locker For Dana 44 With 30 Spline Axles, 3.92 & Up (Part No.34020)

Zip Locker For Dana 44 With 30 Spline Axles, 3.92 & Up

from

$1302.99
The Yukon Zip Locker is the latest in on-demand traction. Its air-operated design allows you to switch from an open differential to 100% lockup when you need it, giving you the ultimate in driver selectability. The Yukon Zip locker is an air operated locker that provides selectable traction for off road or street use. This unit features 4320 Chrome Moly internals for added strength. Assembled in the USA! compressor sold separately. All Zip Lockers are backed by the best warranty in the business! All Zip Lockers come with a six (6) year warranty, including any collaterally damaged parts and associated labor, up to $2,000, for the first two (2) years.

Product Features:
  • Fits Dana Spicer 44 with 30 spline axles
  • 3.92 and up ratio only
  • Forged case and 8620 internals for added strength
  • Works with a variety of air delivery systems
  • Assembled in the USA
See More

Dorman – Oil Drain Plug Differential Plug Chrysler 2008-2000, Head Size (Part No.090-062CD)

Oil Drain Plug Differential Plug Chrysler 2008-2000, Head Size

from

$8.99
This differential cover plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this differential cover plug matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Powertrax – Grip LOK Traction System (Part No.LK436035)

Grip LOK Traction System

from

$684.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More

Yukon Gear – Dana 30 & Dana 44 Power Lok Bolt, Left Hand, & 8.75" Chrysler & 55P (Part No.33234)

Dana 30 & Dana 44 Power Lok Bolt, Left Hand, & 8.75" Chrysler & 55P

from

$26.99
Dana 30 & Dana 44 Power Lok bolt, left hand, & 8.75″ Chrysler & 55P.

Product Features:
  • Power Lok case bolt for Dana Spicer 30, Dana Spicer 44, Chrysler 8.75″ and 1955-1964 GM passenger car
  • Left hand thread
See More

Popular 1976 Dodge W100 Differentials Categories

1976 Dodge W100 Differentials

Maybe you’re in the middle of a full rebuild of that 1976 Dodge W100. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 273 different Differentials in our inventory ranging from $1.99 to $1,566.99. That means you can find the exact parts or products you need to keep that 1976 Dodge W100 running smoothly.

Differentials are only as good as their brand. We stock 12 different brands to make sure you have plenty of trusted parts to choose from for your 1976 Dodge W100. FELPRO, Yukon Gear, and National are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1976 Dodge W100, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 325 reviews in this category, some of the top rated parts include Differential Ring And Pinion Set with 5.0 stars and Ring and Pinion Bearing Installation Kit with 5.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1976 Dodge W100 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1976 Dodge W100 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1976 Dodge W100 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your W100 the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular National Differentials

We carry National parts in our stock across Differential Pinion Pilot Bearings and Differential Pinion Seals categories, plus more. For a 1976 Dodge W100, our most popular National Differentials include:
Shaft Repair Sleeve
from $43.99
(2)
Shaft Repair Sleeve
Differential Pinion Pilot Bearings
Multi Purpose Seal
from $18.99
(1)
Multi Purpose Seal
Differential Pinion Seals
Multi Purpose Seal
from $23.29
(4)
Multi Purpose Seal
Differential Pinion Seals

Top 1976 Dodge W100 Differentials from Felpro

Felpro products are another trusted brand when it comes to Differentials for your 1976 Dodge W100. Popular Felpro parts include:
Differential Cover Gasket
from $9.49
(34)
Differential Cover Gasket
Rear Differential Cover Gaskets
Axle Housing Cover Gasket
from $6.49
(10)
Axle Housing Cover Gasket
Rear Housing Cover Gaskets
Differential Carrier Gasket
from $6.49
(1)
Differential Carrier Gasket
Automatic Transmission Differential Carrier Gaskets

FAQs for 1976 Dodge W100 Differentials

What are the most purchased Differentials for the 1976 Dodge W100?

Out of 273 Differentials for the 1976 Dodge W100, the most popular in our inventory are:
3 Qt - 80W90 Conventional Gear Oil With Posi Additive
from $57.99
This product is not rated
3 Qt – 80W90 Conventional Gear Oil With Posi Additive
Differential Oil
Replacement Ring Gear Bolt For Model 35, Dana 25, 27, 30 & 44 - 3/8" X 24
from $11.99
This product is not rated
Replacement Ring Gear Bolt For Model 35, Dana 25, 27, 30 & 44 – 3/8" X 24
Differential Ring Gear Bolts
Oil Seal
from $10.49
(3)
Oil Seal
Differential Pinion Seals

What are the top-rated 1976 Dodge W100 Differentials?

Top-rated Differentials for your 1976 Dodge W100 based on customer reviews/ratings are:
Differential Ring And Pinion Set
from $384.99
(2)
Differential Ring And Pinion Set
“good”
Ring and Pinion Bearing Installation Kit
from $195.99
(1)
Ring and Pinion Bearing Installation Kit
“This newly designed applicator works incredibly well. *Note that Nissan changed color code A15 from Red Brawn to Sparkle Red, but they are the same c”
Differential Pinion Shim Kit
from $7.49
(1)
Differential Pinion Shim Kit
“good product”