1976 Dodge D100 Performance and Racing Products

Essential 1976 Dodge D100 Performance and Racing Products

B & M – Flexplate, TF 727 383 CID (Part No.10237)

Flexplate, TF 727 383 CID

from

$166.99
As performance levels increase, an O.E. style flexplate just won’t cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flexplate designed for 1971-up Chrysler, Dodge and Plymouth 383, 400 and 440ci (externally balanced cast crankshaft) V8 engines with A727 transmission. Features include high tensile strength steel construction to resist elongation and cracking, 10.00 and 11.125 inch bolt patterns and comes with SFI 29.1 safety certification insuring the ultimate in safety and performance. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M SFI approved flexplates are ideal for extreme duty race applications as well as street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953.

Product Features:
  • NHRA/IHRA Legal For All Classes
  • Includes SFI Certification Sticker
  • Ideal For Street Applications
  • To Extreme Duty Racing
  • To High RPM Use
See More

Edelbrock – Torker II Chrysler Big Block RB Intake Manifold (Part No.5091)

Torker II Chrysler Big Block RB Intake Manifold

from

$373.99
2500-6500 RPM high-performance street engines. Single-plane low-rise intake good for high RPM. Ideal for applications with limited hood clearance. For top-end HP and adequate throttle response. Available in cast or polished.

Product Features:
  • 2500 to 6500 RPM High Performance Street Engines
  • Single-Plane Low-Rise Intake Good for High RPM
  • Ideal for Applications with Limited Hood Clearance
  • For Top-End HP and Adequate Throttle Response
See More

Accel – Ignition/Electrical (Part No.8321)

Ignition/Electrical

from

$717.99


Product Features:
  • Heavy Duty Cap and Rotor Kit
  • With Brass Inserts
See More

Energy Suspension – Control Arm Bushing Set (Part No.5.3106R)

Control Arm Bushing Set

from

$53.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:
  • Maintains Better Alignment While Driving
  • Full Floating and Non Binding
  • Fits Into the Remaining Stock Control Arms
See More

B & M – Automatic Shifter, Quicksilver 4 Speed (Part No.80683)

Automatic Shifter, Quicksilver 4 Speed

from

$439.99
The B&M Quicksilver features a ratcheting action for positive shifts, Chrome Knob, neutral safety switch, NHRA/IHRA approved Reverse Lockout. Fits Most 3 and 4 speeds.

Product Features:
  • Universal Floor Mount Application
  • Base Trimmed For Custom Fit
  • Cable Operated
  • Quick Installation
  • Accurate Shifting
See More

Energy Suspension – Strut Rod Bushing Set (Part No.5.7104G)

Strut Rod Bushing Set

from

$32.99
These performance polyurethane components help reduce common wheel roll-under. This occurs when stopping abruptly, especially when using performance tires for both front of rear drive vehicles is so equipped. Replaces that original, short lived and too-soft O.E.M, rubber on front wheel drive vehicles – diminishes wheel hop and traction loss during standing start accelerations. Better maintains proper alignment under extreme conditions. Made of Energy’s Hyper-Flex performance polyurethane to add both performance and durability.

Product Features:
  • Made from HYPER-Flex Polyurethane
See More

Competition Cams – VALVE SPRINGS, 1.509" DUAL 1 ST (Part No.924-16)

VALVE SPRINGS, 1.509" DUAL 1 ST

from

$788.99
Dual Valve Springs from COMP Cams are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application. The dual spring design creates a stronger valve spring that can easily handle the increased lift found in extreme stress applications. COMP Cams Dual Valve Springs exceed the expectations of today’s engine builders and racers.

Product Features:
  • Seat pressure: 112 lbs. @ 1.900″, Open Pressure: 355 lbs. @ 1.200″
  • O.D.: 1.509″, I.D.: 0.697″
  • Dual valve springs with damper
See More

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1413)

Exhaust Manifold Gasket Set

from

$31.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
  • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
  • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
  • Slotted bolt holes allow for easier header installation.
  • Not intended for use in emission controlled vehicles.
See More

Mr. Gasket – Precision Timing Tape (Part No.1593)

Precision Timing Tape

from

$18.99
Precision timing tape can be used on a factory balancer to create HP through accurate timing, and makes setting valve lash simple.

Product Features:
  • 7 1¿4″ diameter
  • 7 1┐4″ diameter
  • 383 thru 440 cu. in.
  • Increased Performance
  • Set Valve Lash At Proper Time
See More

Powertrax – Lock Right Locker (Part No.1230-LR)

Lock Right Locker

from

$450.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    FEL-PRO Performance – Lower Intake Manifold Gasket Set: 8 Piece Set (Part No.1214)

    Lower Intake Manifold Gasket Set: 8 Piece Set

    from

    $46.99
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
    • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
    • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
    • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
    • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
    See More

    Energy Suspension – Control Arm Bushing Set (Part No.5.3105R)

    Control Arm Bushing Set

    from

    $52.99
    For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

    Product Features:
    • Maintains Better Alignment While Driving
    • Full Floating and Non Binding
    • Fits Into the Remaining Stock Control Arms
    See More

    Energy Suspension – Sway Bar Bushing Set (Part No.5.5140R)

    Sway Bar Bushing Set

    from

    $52.99
    Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

    Product Features:
    • Allows Sway Bar System to Work At 100% Efficiency
    • Zerk Type Fittings
    • Allows for Periodic Greasing
    • Lasts Much Longer Than OEM Rubber Bushings
    • Handling Characteristics Improve Dramatically
    See More

    FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1610)

    Engine Valve Cover Gasket Set

    from

    $27.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
    • Not intended for use in emission controlled vehicles.
    See More

    Competition Cams – VALVE SEALS, TEFLON 3/8" 1 ST (Part No.505-16)

    VALVE SEALS, TEFLON 3/8" 1 ST

    from

    $31.99
    COMP Cams offers a complete line of valve stem seals, from the umbrella seals to the positive-stop Teflon seal. These seals are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The umbrella seal is normally used when a larger-than-stock diameter spring is used, in the case of a double spring, the positive-stop Teflon seal is used. The umbrella seals require no machining, but with the Teflon seal it is necessary to disassemble the heads and machine the top of the guide with a special .530 diameter cutter. Whenever you are planning an engine overhaul or a cam change, don’t forget the valve seals.

    Product Features:
    • Work with .530″ guides and 3/8″ valve stem diameter
    • Valve stem oil seals keep unwanted oil from entering the combustion chamber
    • Several different types of valve seals are offered
    See More

    Energy Suspension – Body Cab Mount Set (Part No.5.4101G)

    Body Cab Mount Set

    from

    $99.99
    Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

    Product Features:
    • Assures Longer Lasting Cab to Bed Alignment
    • Replace to Restore Ride Height
    • Gain Durability
    • Stronger Than Original Rubber Mounts
    See More

    Spectre – Valve Cover (Part No.5277)

    Valve Cover

    from

    $72.99
    Available in various sizes, heights, and finishes, Spectre offers a wide variety of high performance valve covers designed to easily replace your stock covers. Designed for 1958-1979 Chrysler Big Block 361-383-400-413-426-440 engines, this valve cover features chrome-plated steel construction and a smooth design. Sold in pairs, this stock profile cover is baffled to provide optimum function. With show quality construction and a sealing edge designed for an ideal fit, our valve covers are engineered to look great for applications ranging from custom builds to replacing stock equipment.

    Product Features:
    • Designed for 1958-1979 Chrysler Big Block 361-383-400-413-426-440 engines
    • Baffled for breather system compatibility
    • Sold in pairs
    • Triple chrome-plated steel construction
    • Stock height
    • Features OEM style sealing edge
    See More

    Mr. Gasket – Ultra Seal: Oil Pan Gasket (Part No.5895)

    Ultra Seal: Oil Pan Gasket

    from

    $36.49
    Manufactured from cellulose/nitrile composition gasket material. A black latex rubber coating is applied to outside of gasket to help seal minor oil pan rail irregularities and eliminate the possibility of oil leakage. Provides excellent sealing and durability. Complete with molded rubber front/rear oil pan seals where applicable. For original equipment replacement, high performance street, drag race and oval track.

    Product Features:
    • Manufactured from cellulose/nitrile rubber composition gasket material
    • Provides excellent sealing and durability
    • Complete with molded rubber front/rear oil pan end seals where applicable
    • For OE replacement, high performance street, drag race and oval track use
    • Graphite Non-Wicking Rubber
    • No Cork Particles
    • Easy Removal For Disassembly
    See More

    Energy Suspension – Leaf Spring Bushing Set (Part No.5.2102G)

    Leaf Spring Bushing Set

    from

    $34.99
    Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.

    Product Features:
    • Made of Superior Hyper-Flex+ Material
    • Adds Dramatic Amount of Performance/Durability
    • Helps Vehicle Be in Control
    • Allows the Suspension to Function Properly
    See More

    Edelbrock – Performer-Link Adjustable True-Roller Timing Chain Set (Part No.7804)

    Performer-Link Adjustable True-Roller Timing Chain Set

    from

    $96.99


    Product Features:
    • Solid Bushing Chain Resists Stretching
    • For Use with Stock or Edelbrock Camshafts
    • Stressproof Steel Crank Gears
    • 3 Keyway Setting Points To Ensure Accurate Timing
    • True Bearing Surface Rolls with the Sprockets
    See More

    Edelbrock – Water Pump #8814 For 1958-79 BB Chrysler 361-440, Standard Rotation, Satin (Part No.8814)

    Water Pump #8814 For 1958-79 BB Chrysler 361-440, Standard Rotation, Satin

    from

    $237.99
    Maximum cooling for street and racing engines. Internal passages are balanced for maximum flow. Impeller is larger than others for maximum pressure. Impeller vanes dramatically increase flow rates. Equal distribution to both sides of block. Only flows in one direction for optimum efficiency. In the early days of the automotive performance industry, you either ran what was available, or you fabricated something you thought met your needs. Such needs were the building blocks of this industry, and it was through the efforts of many that we have the automotive aftermarket, but it was through the work of one name in particular to which many in the industry owe a great debt, and that name is Edelbrock.

    Product Features:
    • Maximum Cooling for Street and Racing Engines
    • Internal Passages Are Balanced for Maximum Flow
    • Impeller is Larger than Others For Max Pressure
    • Impeller Vanes Dramatically Increase Flow Rates
    • Equal Distribution to Both Sides of Block
    • Only Flows in One-Direction for Optimum Efficiency
    See More

    Mr. Gasket – High Performance Thermostat (Part No.4366)

    High Performance Thermostat

    from

    $26.99
    Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

    Product Features:
    • Opens at 160 Degrees
    • Designed to Resist Large Variations of Coolant Pressure at High RPM
    • Opens at Correct Temperature Consistently Regardless of Engine RPM
    • For High Performance Street, Drag Race, and Oval Track
    • Stainless Steel, Copper & Brass Construction – Resists Corrosion
    • High Flow
    See More

    Spectre – Differential Cover (Part No.6089)

    Differential Cover

    from

    $79.99
    Spectre’s 12 bolt Differential Covers feature a triple chrome plated steel construction. Designed to perform as well as they look, these covers fit a variety of vehicles. Use the Spectre application search for vehicle specific lookup. Includes 12 SAE standard chrome bolts for installation. You’ll need to supply your own bolts if your application requires metric bolts.

    Product Features:
    • Triple chrome plated steel
    • Gasket included
    • 12 bolt design
    • 12 chrome 5/16 inch -18 x 3/4 inch differential cover bolts included
    See More

    Flowtech – Ceramic Header (Part No.33500FLT)

    Ceramic Header

    from

    $572.99


    Product Features:
    • Fuel Economy From The Engine
    • Leak Test For Max Performance
    • Ceramic Headers
    • Rust And Corrosion Resistance
    • Mandrel-Formed Power Plenum
    • Leakproof O-Ringed Port Seals
    • Include All Mounting Hardware
    See More

    Mallory – Distributor Wiring Harness (Part No.29349)

    Distributor Wiring Harness

    from

    $30.49


    Product Features:
    • Service Part
    • Makes Connections Quick And Easy
    See More

    Mr. Gasket – Intake Manifold Bolts (Part No.6091)

    Intake Manifold Bolts

    from

    $32.09
    These special Grade 8 intake manifold bolts feature a 12-point smaller-than-standard head and flange, and include special extra thick flat washers for optimum clamping pressures. They’re ideal for use where space is minimal, typical on larger runner race manifolds. These bolts and washers are bright zinc plated for protection and good looks.

    Product Features:
    • Features 12-point Smaller-than-standard Bolt Head
    • Thick Flat Washers Distribute Optimum Clamp Load
    • Ideal Use Where Space Is Minimal On Race Manifolds
    • Bolts And Washers Zinc Plated For Protection
    • Zinc Plated For Protection
    See More

    Accel – Supercoil (Part No.140001)

    Supercoil

    from

    $105.99
    Engineered for faster rise time, longer spark duration and increased performance. Unique design with premium grade wire, special low resistance, high turns ratio windings. Produces higher spark energy with breakerless electronic ignition systems. For points application the supplied 0.85 ohm ballast resistor must be used in conjunction with the vehicle original ballast resistor, if so equipped. Oversized molded case with integral cooling fins and high capacity oil filled construction provide high thermal conductivity ensuring cool operation and long life. Extra tall tan Alkyd tower and integral voltage dam eliminate “flashover” to primary terminals. Comes complete with mounting hardware and 0.85 ohm ballast resistor. Effective up to 6,500 RPM.

    Product Features:
    • Oil Filled For Better Cooling
    • Optimized Low Resistance
    • Silicon Magnetic Steel E-Core
    • Higher Energy/Voltage Outputs
    • Quicker Starts
    • Improved Idle Quality
    • Resists Shock And Vibration
    • Resists Corrosion
    See More

    MSD Ignition – Wire Set; Super Conductor; Chrysler 383-440 HEI for MSD Distributor (Part No.32739)

    Wire Set; Super Conductor; Chrysler 383-440 HEI for MSD Distributor

    from

    $175.99
    The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

    Product Features:
    • Bolt-on Performance
    • Custom Fit For Make And Model Listed
    • Wires Are Pre-Cut To Exact Specifications
    • Conductor core features DuPont Kevlar material for increased tensile strength
    • Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
    • Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
    See More

    Popular 1976 Dodge D100 Performance and Racing Products Categories

    1976 Dodge D100 Performance and Racing Products

    You count on your 1976 Dodge D100 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 116 Performance and Racing Products ranging in price from $5.99 to $2,198.99, you’re sure to find everything you need for your 1976 Dodge D100.

    Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 19 different brands like K&N, Accel, and Mr. Gasket. 1976 Dodge D100 Performance and Racing Products start as low as $5.99!

    One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 2,182 extensive product reviews on 1976 Dodge D100 Performance and Racing Products. Some of the top-rated Performance and Racing Products products we carry are Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet with 4.7 stars and Intake Manifold Bolts with 4.6 stars.

    Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 1976 Dodge D100 below to get started!

    Top-Rated Performance and Racing Products Brands For Your 1976 Dodge D100

    Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1976 Dodge D100 running right for years to come. In our inventory you’ll find brands like K&N, Accel, Mr. Gasket, and even more.

    Popular Competition Cams Performance and Racing Products

    You’ll find popular Competition Cams brand products across Performance Engines. All are waiting to get your 1976 Dodge D100 back on the road. Some of the top-rated Competition Cams products in these categories are:
    VALVE SEALS, TEFLON 3/8" 1 ST
    from $31.99
    (1)
    VALVE SEALS, TEFLON 3/8" 1 ST
    Performance Engine Valve Stem Seal Sets
    Engine Valve Spring Kit
    from $759.99
    (1)
    Engine Valve Spring Kit
    Performance Engine Valve Springs

    FAQs for 1976 Dodge D100 Performance and Racing Products

    What are the most purchased Performance and Racing Products for the 1976 Dodge D100?

    Out of 116 Performance and Racing Products for the 1976 Dodge D100, the most popular in our inventory are:
    High Performance 180 Degree Thermostat for Increased Flow
    from $26.99
    (20)
    High Performance 180 Degree Thermostat for Increased Flow
    Performance Engine Coolant Thermostats

    What are the top-rated 1976 Dodge D100 Performance and Racing Products?

    Top-rated Performance and Racing Products for your 1976 Dodge D100 based on customer reviews/ratings are:
    Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet
    from $394.99
    (10)
    Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet
    “i have delt with every auto parts dealer there is and advance allways treats me like im their only custemer, thanks guys and gals!!!”
    Intake Manifold Bolts
    from $32.09
    (5)
    Intake Manifold Bolts
    “Excellent product.”
    Performer Carburetor #9906 600 CFM With Electric Choke, Satin Finish (Non-EGR)
    from $397.99
    (5)
    Performer Carburetor #9906 600 CFM With Electric Choke, Satin Finish (Non-EGR)
    “easy to install all the gaskets and parts came with it”