1976 Chevrolet K10 Differentials

Essential 1976 Chevrolet K10 Differentials

USA Standard Gear – Axle Shaft For ’80-’90 4WD GM Truck (Part No.35052)

Axle Shaft For '80-'90 4WD GM Truck

from

$175.99
USA Standard axle shaft for ’80-’90 4WD GM truck. 31 1/2″, 28 spline.

Product Features:
  • Fits 1980-1990 GM 8.5″ truck with 4 wheel drive
  • 28 spline
  • 31 1/2″ long
  • 6 lug
See More

Powertrax – Lock Right Locker (Part No.1940-LR)

Lock Right Locker

from

$441.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Yukon Gear – Replacement Carrier Shim Kit For Dana Spicer 44, 30 Spline Axles (Part No.55010)

    Replacement Carrier Shim Kit For Dana Spicer 44, 30 Spline Axles

    from

    $15.99
    Product Features:
    • Carrier shim kit for Dana Spicer 30 with 30 spline axles
    See More

    Yukon Gear – Differential (Part No.26040)

    Differential

    from

    $939.99
    Differential

    Yukon Gear – Replacement Front Axle Inner Seal Redi-Sleeve For Dana 44 & 8.5" GM (Part No.30219)

    Replacement Front Axle Inner Seal Redi-Sleeve For Dana 44 & 8.5" GM

    from

    $83.99
    Replacement front axle inner seal redi-sleeve for Dana 44 & 8.5″ GM.Yukon Mighty seal.

    Product Features:
    • Axle Redi-sleeve
    • Fits Dana Spicer 44
    See More

    Felpro – DIFFERENTIAL GASKET (Part No.RDS 13391)

    DIFFERENTIAL GASKET

    from

    $7.99
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific design to ensure a perfect fit
    • Unsurpassed quality you can trust
    • Validated for fit, form and function
    • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
    See More

    Yukon Gear – Master Overhaul Kit For GM 12 Bolt Truck Differential (Part No.14068)

    Master Overhaul Kit For GM 12 Bolt Truck Differential

    from

    $314.99
    Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application. Includes Supershims.

    Product Features:
    • Fits GM 12 bolt truck
    • Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve , thread locker, marking compound with brush, and gasket.
    See More

    Motive Gear – Pinion Nut (Part No.3752901)

    Pinion Nut

    from

    $7.49
    Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
    See More

    ARP Auto Racing – For Use With General Motors, 0.800" Head L, 3/8" – 24 Thread Size, Chrome Moly (Part No.230-3001)

    For Use With General Motors, 0.800"  Head L, 3/8" - 24 Thread Size, Chrome Moly

    from

    $37.99
    The tremendous shock loads generated at launch by most any drag racing vehicle equipped with todays sticky tire compounds or the acceleration and deceleration of oval track cars put considerable strain on the ring gear. For this reason, the fastener experts at ARP have developed the Pro Series ring gear bolts. They are forged from premium grade 8740 chrome moly steel and are heat treated to a nominal rating of 200,000 PSI tensile strength. Specially hardened, precision ground washers are included where required. Available to fit most any ring gear setup ranging from popular 9 Inch Ford GM 10 and 12 bolt rear ends to the beefy strange differentials found in top fuel and funny car applications.

    Product Features:
    • Forged From Premium Grade 8740 Chrome Moly Steel
    • Heat Treated
    • Nominally Rated At 200,000 Psi Tensile Strength
    • Specially Hardened, Precision Ground Washers
    • 3/8″-24 RH Thread Size
    • 0.8″ Underhead Length
    • 200,000 PSI
    See More

    Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

    Redline Synthetic "Shock Proof" Oil - 3 Quarts

    from

    $99.99
    Redline Synthetic “Shock Proof” Oil. 3 Quarts.

    Product Features:
    • Includes three quarts of Redline Shockproof oil
    See More

    Yukon Gear – Replacement Oil Baffle For Dana 44 (Part No.33000)

    Replacement Oil Baffle For Dana 44

    from

    $6.99
    Product Features:
    • Oil baffle for Dana Spicer 44
    See More

    Yukon Gear – Powr Lok Button Kit For Dana 30, Dana 44 & Chrysler 8.75" (Part No.33536)

    Powr Lok Button Kit For Dana 30, Dana 44 & Chrysler 8.75"

    from

    $67.99
    Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t

    Product Features:
    • Powr Lok button kit
    • Fits Dana Spicer 30, 44 and Chrysler 8.75″
    See More

    National – Multi Purpose Seal (Part No.5778)

    Multi Purpose Seal

    from

    $23.29
    National« has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today┐s vehicles.

    Product Features:
    • Design type: spring loaded; multi-lip
    • Temperature range: -20░F to 300░F / -29░C to 49░C
    • Resistance to EP lubricants
    • Low swell in hydrocarbon fluids
    • Delivers quality and reliable performance for every type of repair
    See More

    USA Standard Gear – Spartan Locker for Dana 60 Differential with 35 Spline Axles, Includes Heavy-duty Cross Pin Shaft (Part No.17004)

    Spartan Locker for Dana 60 Differential with 35 Spline Axles, Includes Heavy-duty Cross Pin Shaft

    from

    $829.99
    The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.

    Product Features:
    • Fits Dana Spicer 60 with 35 spline axles
    • Made from 9310 steel for added strength
    • Replaces the spiders in a standard carrier case
    See More

    Yukon Gear – Dana 44, Ford 8" / 9", And Model 20 Side Gear Thrust Washer Replacement (Part No.33283)

    Dana 44, Ford 8" / 9", And Model 20 Side Gear Thrust Washer Replacement

    from

    $5.99
    Product Features:
    • Side gear thrust washer for Ford 8″, Ford 9″ and AMC Model 20
    • 0.030″ thick
    See More

    Yukon Gear – Replacement Carrier Shim Kit For Dana 60, 61 & 70U (Part No.55020)

    Replacement Carrier Shim Kit For Dana 60, 61 & 70U

    from

    $104.99
    Product Features:
    • Carrier shims for Dana Spicer 60 and 70U
    See More

    USA Standard Gear – Master Overhaul Kit for the GM 12T Differential (Part No.37043)

    Master Overhaul Kit for the GM 12T Differential

    from

    $194.99
    USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

    Product Features:
    • Fits GM 12 bolt truck
    • Uses Koyo bearings and races
    • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
    See More

    Yukon Gear – Dana 44 Carrier Installation Kit Replacement (Part No.57003)

    Dana 44 Carrier Installation Kit Replacement

    from

    $128.99
    Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Dana 44 differential. This kit contains carrier bearings, races and shims.

    Product Features:
    • Fits Dana Spicer 44
    • Includes carrier bearings and races and carrier shim kit
    See More

    Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)

    Dana 60, Dana 70 & Dana 80 Cover Bolt

    from

    $5.99
    3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.

    Product Features:
    • Cover bolt for Dana Spicer 60, 70 and 80
    • 3/8″
    See More

    Yukon Gear – Replacement Pinion Preload Shims For Dana 60, Dana 61 & Dana 70-U (Part No.55015)

    Replacement Pinion Preload Shims For Dana 60, Dana 61 & Dana 70-U

    from

    $19.99
    Product Features:
    • Pinion preload shims for Dana Spicer 60 and 70U
    See More

    Yukon Gear – Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70 (Part No.23007)

    Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70

    from

    $13.99
    Product Features:
    • Cover gasket
    • Fits Dana Spicer 60, 70, 70U and 70HD
    See More

    Richmond Gear – RngPnnInstlKt (Part No.83-1018-B)

    RngPnnInstlKt

    from

    $39.49
    RngPnnInstlKt

    Yukon Gear – Chrome Cover For 8.6", 8.5" And 8.2" GM Rear (Part No.32017)

    Chrome Cover For 8.6", 8.5" And 8.2" GM Rear

    from

    $74.99
    Chrome cover for 8.6″, 8.5″ and 8.2″ GM rear.

    Product Features:
    • Fits GM 8.2″, 8.5″ and 8.6″
    • Chrome
    See More

    Yukon Gear – Pinion Nut Washer (Part No.33166)

    Pinion Nut Washer

    from

    $23.99
    Pinion nut washer for GM 12 bolt car & truck, 55-62 GM car & truck, GM 8.2″ & 63-79 Corvette.

    Product Features:
    • Pinion nut washer for GM 12 bolt car and truck, 1955-1964 GM car and truck, GM 8.2″ and 1963-1979 Corvette.
    See More

    Dorman – Differential Pinion Yoke Assembly (Part No.697-529)

    Differential Pinion Yoke Assembly

    from

    $203.99
    Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

    Product Features:
    • Direct replacement – this differential end yoke matches the fit and construction of the original yoke.
    • Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts.
    • Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
    • Validated fit – this differential end yoke has been tested to confirm accurate fit
    See More

    Driveworks – Tapered Roller Bearing (Part No.S-HM-88510)

    Tapered Roller Bearing

    from

    $10.29
    Product Features:
    • Brand may vary by location
    See More

    Pro-King – Differential Cross Shaft (Part No.742G673)

    Differential Cross Shaft

    from

    $28.49
    Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

    Product Features:
    • All products are designed to meet or exceed OE quality, form, fit and funtion.
    See More

    Yukon Gear – Positraction Internals For Dana 44 Dura Grip Posi, 30 Spline (Part No.16168)

    Positraction Internals For Dana 44 Dura Grip Posi, 30 Spline

    from

    $399.99
    Yukon positraction internals for Dana 44 Dura Grip posi, 30 spline. Does not include clutches. Does NOT fit Trac Loc or Powr Lok. Fits Dura Grip ONLY.

    Product Features:
    • Spider gear kit
    • Fits Dana Spicer 44 with Dura Grip positraction
    • Includes two side gears, four pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
    See More

    Popular 1976 Chevrolet K10 Differentials Categories

    1976 Chevrolet K10 Differentials

    Maybe you’re in the middle of a full rebuild of that 1976 Chevrolet K10. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 341 different Differentials in our inventory ranging from $1.99 to $1,969.99. That means you can find the exact parts or products you need to keep that 1976 Chevrolet K10 running smoothly.

    Differentials are only as good as their brand. We stock 15 different brands to make sure you have plenty of trusted parts to choose from for your 1976 Chevrolet K10. Valvoline, FELPRO, and Driveworks are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

    We know you’ll find the perfect Differentials for your 1976 Chevrolet K10, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 1,788 reviews in this category, some of the top rated parts include Differential Shaft Lock Bolt with 4.0 stars and Differential Ring And Pinion with 5.0 stars.

    So if you’re in the market for aftermarket Differentials to keep your 1976 Chevrolet K10 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

    Differentials Brands To Make Your 1976 Chevrolet K10 Last

    Simple repair, complete replacement, or a full rebuild. No matter the job, your 1976 Chevrolet K10 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your K10 the best it can be. Be sure to browse some of our top Differentials brands and parts.

    Top 1976 Chevrolet K10 Differentials from Felpro

    Felpro products are another trusted brand when it comes to Differentials for your 1976 Chevrolet K10. Popular Felpro parts include:
    Differential Cover Gasket
    from $9.99
    (195)
    Differential Cover Gasket
    Rear Differential Cover Gaskets
    Axle Housing Cover Gasket
    from $6.49
    (10)
    Axle Housing Cover Gasket
    Rear Housing Cover Gaskets
    DIFFERENTIAL GASKET
    from $7.99
    (3)
    DIFFERENTIAL GASKET
    Rear Housing Cover Gaskets

    FAQs for 1976 Chevrolet K10 Differentials

    What are the most purchased Differentials for the 1976 Chevrolet K10?

    Out of 341 Differentials for the 1976 Chevrolet K10, the most popular in our inventory are:
    Tapered Cone/Cup Wheel Bearing Set
    from $13.99
    (14)
    Tapered Cone/Cup Wheel Bearing Set
    Front Differential Pinion Bearings
    3 Qt - 80W90 Conventional Gear Oil With Posi Additive
    from $57.99
    This product is not rated
    3 Qt – 80W90 Conventional Gear Oil With Posi Additive
    Differential Oil
    Bearings
    from $23.99
    (7)
    Bearings
    Front Differential Pinion Bearings

    What are the top-rated 1976 Chevrolet K10 Differentials?

    Top-rated Differentials for your 1976 Chevrolet K10 based on customer reviews/ratings are:
    Differential Shaft Lock Bolt
    from $5.99
    (11)
    Differential Shaft Lock Bolt
    “great”
    Differential Ring And Pinion
    from $350.99
    (7)
    Differential Ring And Pinion
    “Great spark plugs.”
    Differential Master Bearing Kit - Koyo
    from $156.99
    (5)
    Differential Master Bearing Kit – Koyo
    “was delivered as promised and on time”